HTML5 Bytebeat

Bytebeat is the name of type of music made from math.

You provide a function who's only input is time t and from that write some code to generate a sound.

In this particular case t is an 8000hz timer that counts up. For example

sin(t) * 127 + 127

You can choose traditional bytebeat where the output of your function is expected to be 0 to 255 or you can choose floatbeat where the output is expected to be -1 to +1.

Functions are just plain JavaScript though sin, cos, tan, floor, ceil and int will automatically be converted to Math.sin, Math.cos, Math.tan, Math.floor, Math.ceil, and Math.floor respectively.

Click here to try your hand at Bytebeat.

Instructions

Modes

There 2 modes

bytebeat: Your expression is expected to generate byte values from 0 to 255
floatbeat: Your expression is expected to generate float values from -1.0 to 1.0

Expression Types

Infix: Standard expressions eg. "(t * 2) / 4"
Postfix(rpn): Reverse Polish Notation eg "t 2 * 4 /"
glitch: glitch format or glitch urls.
function: Return a function. eg. "return t => (t * 2) / 4"

Infix is standard JavaScript so all Math functions are available. Most math functions you can drop the "Math." part. In other words

sin(t)

is the same as

Math.sin(t)

Postfix requires that each element have at least one space between it.

t2*    // BAD!
t 2 *  // Good!

If you're unfamiliar with postfix see below

Glitch is a format used by glitch machine for sharing. Examples

These can be prefixed with "glitch://". For example

glitch://sadglitch!4.4.9.8.9.6.4.2!aoCk8hq!ad2d!aFk3h1fe!p5d3em!a63hm!a7kFFlp80slf

There's a bunch more here. I have a feeling there's a bug or 2 left for full glitch support

Function

Expects a function body vs infix which expects an expression

infix: sin(t)

function: return t => sin(t)

Note thought that "function" receives t in seconds, not samples.

See below

Postfix

Postfix in this case I guess can be described as forth like. It works with a stack. Each command either adds things to the stack or uses what's on the stack to do something. For example

123       // pushes 123 on the stack               stack = 123
456       // pushes 456 on the stack               stack = 123, 456
+         // pop the stop 2 things on the stack
          // adds them, puts the result on the
          // stack                                 stack = 569

Note the stack is only 256 elements deep. If you push 257 elements it wraps around. Similarly if you use pick with a large value your pick will wrap around. The stack is neither cleared nor reset on each iteration of your function. Some postfix based bytebeat songs take advantage of this where each iteration leaves things on the stack for the next iteration.

operators

The postfix operators are

>, < ,=

These take the top two things from the stack, do the comparision, then push 0xFFFFFFFF if the result is true or 0x0 if the result is false. Think of it has follows: If the TOP thing on the stack is >, <, or = to the next thing on the stack then 0xFFFFFFFF else 0x0

drop

removes the top thing from the stack

dup

duplicates the top thing on the stack.

swap

swaps the top 2 things on the stack

pick

pops the top thing from the stack and duplicates one item that many items back. In other words if the stack is 1,2,3,4,5,6,7,3 then pick pops the top thing 3 and duplicates the 3rd thing back counting from 0, which is no 4. The stack is then 1,2,3,4,5,6,7,4.

Another way to look at it is dup is the same as 0 pick.

put

sets the n'th element from the top of the stack to the current top. In other words if the stack is 1,2,3,4,5,6,7,3,100 then put will pull the top 100 and then set the 3 element back. The stack will then be 1,2,3,4,100,6,7,3.

abs, sqrt, round, tan, log, exp, sin, cos, tan, floor, ceil, int min, max, pow

These operators all pop the top value from the stack, apply the operator, then push the result on the stack

/, +, -, *, %, >>, <<, |, &, ^, &&, ||:

These operators pop the top 2 values from the stack, apply the operator, then push the result. The order is as follows

b = pop
a = pop
push(a op b)

In other words 4 2 / is 4 divided by 2.

~

Pops the top of the stack, applies the binary negate to it, pushes the result.

Function

See Rant.

"function" means you could write code that returns a function. The simplest example might be

return function(t) {
  sin(t);
}

or shorter

return t => sin(t);

The point being you can write more generic JavaScript. For example

const notes = [261.62, 329.628, 391.995, 523.25, 391.995, 329.628, 261.62, 261.62, 1, 1];

function getNote(t) {
  const ndx = (t * 4 | 0) % notes.length;
  return note = notes[ndx];
}

return function(t) {
  const note = getNote(t);
  return sin(t * 10 * note);
}

Example

But see Rant why this is seems kind of missing the point.

Stereo

You can emit an array with 2 values for left and right channels. Eg.

[sin(t), sin(t / 2)]

Extra

Comments can be both // or /* */ style and I'd personally suggest you use comments for your name, the song's name, etc...

There are several extra inputs available:

The mouse position is available as mouseX and mouseY

sin(t * mouseX * 0.001) + cos(t * mouseY * 0.003)

The size of the window is available width and height

Also note, using the comma operator you can write fairly arbitrary code. See this example.

Putting a comment in form of

// vsa: <url>

Will apply a vertexshaderart piece. Example

Rant

The original bytebeat, or at least the one I saw, was fairly simple. 8bits, stack based, few options. When I built a live JavaScript version I just thought "you get an expression that takes time and returns a value". The end.

A few obvious additions, at least to me, were floatbeat, because the Web Audio API itself takes floats and IIRC some original C based thing that took a function expected floats. In fact I wrote that first. I just fed an expression that returns floats into the Web Audio API. I then manually converted a few beatbyte expressions by just putting (original-bytebeat-expression) / 127 - 1.

The reason I didn't just stick with floatbeat is bytebeat expressions already existed and wanted people to be able to use them without having to understand how to convert, even though it's trivial.

But now I see people have added signed bytebeat. What is the point? Any signed bytebeat can be turned in to regular bytebeat by just putting + 0x80 at the end of your expression. The entire point of bytebeat is to be self sufficient, to put what you need in the expression itself.

I then found a funcbeat in which instead of an expression you pass it a function body. AFAICT the advantage is you can write code and declare other functions and data vs having to squeeze everything into an expression with commas. For example:

const notes = [261.62, 329.628, 391.995, 523.25, 391.995, 329.628, 261.62, 261.62, 1, 1];

function getNote(t) {
  const ndx = (t * 4 | 0) % notes.length;
  return note = notes[ndx];
}

return function(t) {
  const note = getNote(t);
  return sin(t * 10 * note);
}

But again, What is the point? If you're going to write real code with no limits then why do it this way all? Just write code, no need to try to cram it into a bytebeat player?

Then I found that some people had added a time divisor. For example, instead of t counting in samples it can count in seconds (fractional values). But again, what is the point? Why does this option need to exist when you can just divide t by the sample rate in the expression itself?

It'd be like if someone added various options for time. t = sample, t = sample / sampleRate, t = sin(sammple), t = sin(sample / sampleRate), etc... The whole point is to PUT THE MATH IN YOUR EXPRESSION!!!. There is no need to add these options 😤

</rant> 😛

For more info

Check out http://canonical.org/~kragen/bytebeat/ and be sure follow the many links.

Special thanks to:

Paul Pridham for his Glitch Machine iOS Bytebeat program.
Mr.Doob for his GLSL Sandbox where much of this code was cribbed.
Nathan Rugg for his LZMA-JS library.
Darius Bacon for his bytebeat program and for tips and examples to test it.
All the people making awesome bytebeats!

Library

You can use this as a library. The library provides a ByteBeatNode which is a WebAudio AudioNode.

Example usage:

import ByteBeatNode from 'https://greggman.github.io/html5byteabeat/dist/1.x/ByteBeat.module.js';

async function start() {
  const context = new AudioContext();
  context.resume();  // needed for safari
  await ByteBeatNode.setup(context);
  byteBeatNode = new ByteBeatNode(context);
  byteBeatNode.setType(ByteBeatNode.Type.byteBeat);
  byteBeatNode.setExpressionType(ByteBeatNode.ExpressionType.infix);
  byteBeatNode.setDesiredSampleRate(8000);
  byteBeatNode.setExpressions(['((t >> 10) & 42) * t']);
  byteBeatNode.connect(context.destination);
}

Live examples:

API

There's just one class ByteBeatNode. You must call the async function ByteBeatNode.setup before using the library.

reset()

re-starts the time to 0
isRunning(): bool

true or false if running. The node is considered running if it's connected.
async setExpressions(expressions: string[], resetToZero: bool)

Pass in array of 1 or 2 expressions. If 2 expressions it is assumed each expression is for a different channel. If a single expression returns an array of 2 values that is also also assumed to be 2 channels. Otherwise, it's 1 channel and will be output to both left and right channels.

Note: this function is async. You can catch expression errors with try/catch.
setDesiredSampleRate(rate: number)

Sets the sample rate for the expression (eg 8000, 11000, 22050, 44100, 48000)
getDesiredSampleRate(): number

Returns the previously set sample rate

setExpressionType(expressionType: number)

Sets the expression type. Valid expression types

ByteBeatNode.ExpressionType.infix             // sin(t / 50)
ByteBeatNode.ExpressionType.postfix           // t 50 / sin
ByteBeatNode.ExpressionType.glitch            // see docs
ByteBeatNode.ExpressionType.function          // return function() { sin(t / 50); }

getExpressionType(): number

Gets the expression type

setType(type: number)

Sets the output type.

Valid types

ByteBeatNode.Type.byteBeat          // 0 <-> 255
ByteBeatNode.Type.floatBeat         // -1.0 <-> +1.0
ByteBeatNode.Type.signedByteBeat    // -128 <-> 127

getType(): number

Gets the type
getNumChannels(): number

Returns the number of channels output by the current expression.
getSampleForTime(time: number, context, stack, channel: number)

Gets a -1 to +1 from the current expression for the given time (time is the t value in your expression)

This function is useful for visualizers.

To make a stack call ByteBeatNode.createStack(). To create a context call ByteBeatNode.createContext. A stack is used for postfix expressions. See docs on postfix. The context is used for keeping expressions state for expressions that try hacks to keep state around like if they build a large note table and assign it to window. It won't actually be assigned to window, it will be assigned to the context (in theory)

Development / running locally

git clone https://github.com/greggman/html5bytebeat.git
cd html5bytebeat
npm i
npm start

The instructions above assume you have node.js installed. If not, if you're on windows use nvm-windows, or if you're on mac/linux use nvm.

Or you can just use the installers at nodejs.org though I'd recommend nvm and nvm-windows personally as once you get into node dev you'll likely need different versions for different projects.

License

MIT

License

floppa-the-flopper/html5bytebeattest

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages