MyNatsClient

A .NET5 and .NET Core 3.1 based, async and ReactiveExtensions (RX) friendly client for NATS Server. It's RX friendly cause it's based around IObservable<T>. It keeps as much of NATS domain language as possible but does not limit itself to follow the APIs of other NATS clients, but instead offer one that fits the .NET domain and one that first and foremost is a client written for .NET. Not GO or JAVA or Foo.

It offers both simple and advanced usage. By default it's configured to auto reply on heartbeat pings and to reconnect on failures. You can seed it with multiple hosts in a cluster. So if one fails it will reconnect to another one.

Similar to RX you decide the behavior of your in-process observer subscriptions upon failures. If it should be auto unsubscribed or continue to live. See Subscribe vs SubscribeSafe below.

It keeps track of when the last contact to a server was, so that it can send a PING to see if server is still alive.

Instead of relying on background flushing, it auto flushes for each PUB. You can also use the construct client.PubMany to publish many messages and get one flush for them all. Finally you can also control the flushing manually.

It supports:

Pub-Sub
Request-Response (single or inbox per client)
Queue groups

Samples

Some simple samples will be kept in the same repo as the project, under src\samples

Metrics

Fast? Yes it is. More info can be found here: MyNatsClient - It flushes, but so can you And things has been improved since then.

License

MyNatsClient is licensed under MIT so have fun using it.

NuGet Packages

If you just want the client and not the Reactive Extensions packages, use:

install-package MyNatsClient

Encodings

You can also get simplified support for specific payload encodings:

install-package MyNatsClient.Encodings.Json

This gives you a JsonEncoding and some pre-made extension methods under MyNatsClient.Encodings.Json.Extensions

install-package MyNatsClient.Encodings.Protobuf

This gives you a ProtobufEncoding and some pre-made extension methods under MyNatsClient.Encodings.Protobuf

Security

Currently the client supports:

TLS1.2 (configured via ConnectionInfo.ServerCertificateValidation and ConnectionInfo.ClientCertificates)
Credentials authentication via ConnectionInfo.Credentials or ConnectionInfo.Host[0..n].Credentials

Inbox-requests

There's a setting: connectionInfo.UseInboxRequests = true; (enabled by default) controlling if the client should subscribe to the NATS-server using a wildcard subscription IB.unique-client-id.* and then route the incoming-response to the requestor.

The benefits are better performance. If you want the one-sub-unsub per request behavior, just disable it: connectionInfo.UseInboxRequests = false.

Pub-Sub sample

Simple pub-sub sample showing one client that publishes and one that subscribes. This can of course be the same client and you can also have more clients subscribing etc.

Publisher

var cnInfo = new ConnectionInfo("192.168.1.10");
var client = new NatsClient(cnInfo);

await client.ConnectAsync();

await client.PubAsync("tick", GetNextTick());

//or using an encoding package e.g. Json
await client.PubAsJsonAsync("tickItem", new Tick { Value = GetNextTick() });

Subscriber

var cnInfo = new ConnectionInfo("192.168.1.10");
var client = new NatsClient(cnInfo);

await _client.ConnectAsync();

await client.SubAsync("tick", stream => stream.Subscribe(msg => {
    Console.WriteLine($"Clock ticked. Tick is {msg.GetPayloadAsString()}");
}));

//or using an encoding package e.g Json
await client.SubAsync("tickItem", stream => stream.Subscribe(msg => {
    Console.WriteLine($"Clock ticked. Tick is {msg.FromJson<TestItem>().Value}");
}))

Stream.Subscribe vs Stream.SubscribeSafe

The initial behavior was to call OnError when a handler was throwing an exception and had specified a OnError handler. This has changed. The motivation around this is, that it's not the producer side that is causing the exception (read more).

If you subscribe to e.g. the MessageOpStream using Stream.Subscribe and your handler is throwing an exception. That in-process handler will be removed.

await client.SubAsync("mySubject", stream => stream.Subscribe(msg => DoSomething(msg)));

If you instead subscribe using Stream.SubscribeSafe any unhandled exception will get swallowed and the in-process handler will still be around.

await client.SubAsync("mySubject", stream => stream.SubscribeSafe(msg => DoSomething(msg)));

Catch & CatchAny

If you want a generic way to handle exceptions in your handlers, you can use a CatchObserver e.g via the aliases stream.Catch or stream.CatchAny.

await client.SubAsync("mySubject", stream => stream
    .Catch((FooException ex) => {})
    .Subscribe(msg => DoSomething(msg)));

await client.SubAsync("mySubject", stream => stream
    .CatchAny(ex => {})
    .Subscribe(msg => DoSomething(msg)));

Request-Response sample

Simple request-response sample. This sample also makes use of two clients. It can of course be the same client requesting and responding, you can also have more responders forming a queue group. Where one will be giving the answer.

Requester

var cnInfo = new ConnectionInfo("192.168.1.10");
var client = new NatsClient(cnInfo);

await _client.ConnectAsync();

var response = await client.RequestAsync("getTemp", "stockholm@sweden");
Console.WriteLine($"Temp in Stockholm is {response.GetPayloadAsString()}");

Responder

var cnInfo = new ConnectionInfo("192.168.1.10");
var client = new NatsClient(cnInfo);

await _client.ConnectAsync();

await client.SubAsync("getTemp", stream => stream.Subscribe(msg => {
    client.Pub(msg.ReplyTo, getTemp(msg.GetPayloadAsString()));
}));

Advanced usage

Some code showing more advanced usage.

var connectionInfo = new ConnectionInfo(
    //Hosts to use. When connecting, will randomize the list
    //and try to connect. First successful will be used.
    new[]
    {
        new Host("192.168.1.176", 4222),
        new Host("192.168.1.177", 4222)
        {
            Credentials = new Credentials("foo_user", "bar_pwd")
        }
    })
{
    UseInboxRequests = true,
    AutoRespondToPing = true,
    AutoReconnectOnFailure = true,
    Verbose = false,
    Credentials = new Credentials("testuser", "p@ssword1234"),
    RequestTimeoutMs = 5000,
    PubFlushMode = PubFlushMode.Auto,
    ClientCertificates = new X509Certificate2Collection(),
    ServerCertificateValidation = (x509Cert, x509Chain, policyErrors) => { ... }
    SocketOptions = new SocketOptions
    {
        AddressType = SocketAddressType.IpV4, //Set to null to auto detect (.NET & OS default)
        ReceiveTimeoutMs = 5000,
        SendTimeoutMs = 5000,
        ConnectTimeoutMs = 5000,
        ReceiveBufferSize = null, //.NET & OS default
        SendBufferSize = null, //.NET & OS default
        UseNagleAlgorithm = false
    }
};

using (var client = new NatsClient(connectionInfo))
{
    //You can subscribe to dispatched client events
    //to react on something that happened to the client
    client.Events.OfType<ClientConnected>().Subscribe(ev
        => Console.WriteLine("Client connected!"););

    client.Events.OfType<ClientWorkerFailed>().Subscribe(ev
        => Console.WriteLine($"Client consumer failed with Exception: '{ev.Exception}'.");

    //Disconnected, either by client.Disconnect() call
    //or caused by fail in your handlers.
    client.Events.OfType<ClientDisconnected>().Subscribe(ev =>
    {
        Console.WriteLine($"Client was disconnected due to reason '{ev.Reason}'");
        if (ev.Reason != DisconnectReason.DueToFailure)
            return;

        if(!connectionInfo.AutoReconnectOnFailure)
            ev.Client.Connect();
    });

    //Subscribe to OpStream to get ALL ops e.g InfoOp, ErrorOp, MsgOp, PingOp, PongOp.
    client.OpStream.Subscribe(op =>
    {
        Console.WriteLine("===== RECEIVED =====");
        Console.Write(op.GetAsString());
    });

    //Filter for specific types
    client.OpStream.OfType<PingOp>().Subscribe(ping =>
    {
        if (!connectionInfo.AutoRespondToPing)
            client.Pong();
    });

    client.OpStream.OfType<MsgOp>().Subscribe(msg =>
    {
        Console.WriteLine("===== MSG =====");
        Console.WriteLine($"Subject: {msg.Subject}");
        Console.WriteLine($"ReplyTo: {msg.ReplyTo}");
        Console.WriteLine($"SubscriptionId: {msg.SubscriptionId}");
        Console.WriteLine($"Payload: {Encoding.UTF8.GetString(msg.Payload)}");
    });

    //Use the MsgOpStream, which ONLY will contain MsgOps, hence no filtering needed.
    client.MsgOpStream.Subscribe(msg =>
    {
        Console.WriteLine("===== MSG =====");
        Console.WriteLine($"Subject: {msg.Subject}");
        Console.WriteLine($"ReplyTo: {msg.ReplyTo}");
        Console.WriteLine($"SubscriptionId: {msg.SubscriptionId}");
        Console.WriteLine($"Payload: {Encoding.UTF8.GetString(msg.Payload)}");
    });

    var subscription = client.Sub("foo");

    client.Connect();

    Console.WriteLine("Hit key to UnSub from foo.");
    Console.ReadKey();

    //Either...
    client.UnSub(subscription.SubscriptionInfo);
    //Or...
    subscription.Dispose();

    Console.WriteLine("Hit key to Disconnect.");
    Console.ReadKey();
    client.Disconnect();
}

Subscribing & Unsubscribing

The Client will keep track of subscriptions done. And you can set them up before connecting. Once it gets connected, it will register the subscriptions against the NATS server. If you make use of ConnectionInfo.AutoReconnectOnFailure it will also re-subscribe in the event of exceptions.

When subscribing to a subject using the client, you will be returned a ISubscription. The methods for subscribing are:

client.Sub(string|subscriptionInfo)
client.Sub(string|subscriptionInfo, msgs => msgs.Subscribe(...))
client.SubAsync(string|subscriptionInfo)
client.SubAsync(string|subscriptionInfo, msgs => msgs.Subscribe(...))

To Unsubscribe, you can do any of the following:

Dispose the ISubscription returned by any of the subscribing methods listed above.
Dispose the NatsClient and it will take care of the subscriptions.
Pass the ISubscription or the SubscriptionInfo to any of the client.Unsub|UnsubAsync methods
Create the subscription using a SubscriptionInfo with MaxMessages, then it will auto unsubscribe after receiving the messages.

NOTE it's perfectly fine to do both e.g. subscription.Dispose as well as consumer.Dispose or e.g. consumer.Unsubscribe and then subscription.Dispose.

Client.Events

The events aren't normal events, the events are distributed via client.Events which is an IObservable<IClientEvent>. The events are:

ClientConnected
ClientDisconnected
ClientAutoReconnectFailed
ClientWorkerFailed

ClientConnected

Signals that the client is connected and ready for use.

client.Events.OfType<ClientConnected>().Subscribe(async ev => { });

ClientDisconnected

You can use the ClientDisconnected.Reason to see if you manually should reconnect the client:

client.Events.OfType<ClientDisconnected>().Subscribe(ev =>
{
    if (ev.Reason != DisconnectReason.DueToFailure)
        return;

    //Not needed if you use `ConnectionInfo.AutoReconnectOnFailure`.
    if(!connectionInfo.AutoReconnectOnFailure)
        ev.Client.Connect();
});

ClientAutoReconnectFailed

If you use ConnectionInfo.AutoReconnectOnFailure and the client can not auto reconnect within a few attempts, this event will be raised.

client.Events.OfType<ClientAutoReconnectFailed>().Subscribe(ev =>
{
    //Maybe manually try and connect again or something
    ev.Client.Connect();
});

ClientWorkerFailed

This would be dispatched from the client, if the Consumer (internal part that continuously reads from server and dispatches messages) gets an ErrOp or if there's an Exception. E.g. if there's an unhandled exception from one of your subscribed observers.

Connection behaviour

When creating the ConnectionInfo you can specify one or more hosts. It will try to get a connection to one of the servers. This is picked randomly and if no connection can be established to any of the hosts, an NatsException will be thrown.

Auth

You specify credentials on the ConnectionInfo object or on individual hosts:

var hosts = new [] {
    new Host("192.168.2.1"),
    new Host("192.168.2.2") {
        Credentials = new Credentials("foo", "bar")
    }
};
var cnInfo = new ConnectionInfo(hosts)
{
    Credentials = new Credentials("test", "p@ssword1234")
};

If the server is configured to require user and pass, you will get an exception if you have not provided credentials. It will look something like:

NatsException : No connection could be established against any of the specified servers.

With an inner exception of:

Error while connecting to ubuntu01:4223. Server requires credentials to be passed. None was specified.

SocketOptions

You can adjust the SocketOptions by configuring the following:

public class SocketOptions
{
    /// <summary>
    /// Gets or sets the type of address to use for the Socket.
    /// </summary>
    public SocketAddressType? AddressType { get; set; } = SocketAddressType.IpV4;

    /// <summary>
    /// Gets or sets the ReceiveBufferSize of the Socket.
    /// Will also adjust the buffer size of the underlying <see cref="System.IO.BufferedStream"/>
    /// that is used by the consumer.
    /// </summary>
    public int? ReceiveBufferSize { get; set; }

    /// <summary>
    /// Gets or sets the SendBufferSize of the Socket.
    /// Will also adjust the buffer size of the underlying <see cref="System.IO.BufferedStream"/>
    /// that is used by the publisher.
    /// </summary>
    public int? SendBufferSize { get; set; }

    /// <summary>
    /// Gets or sets the Recieve timeout in milliseconds for the Socket.
    /// When it times out, the client will look at internal settings
    /// to determine if it should fail or first try and ping the server.
    /// </summary>
    public int? ReceiveTimeoutMs { get; set; } = 5000;

    /// <summary>
    /// Gets or sets the Send timeout in milliseconds for the Socket.
    /// </summary>
    public int? SendTimeoutMs { get; set; } = 5000;

    /// <summary>
    /// Gets or sets the Connect timeout in milliseconds for the Socket.
    /// </summary>
    public int ConnectTimeoutMs { get; set; } = 5000;

    /// <summary>
    /// Gets or sets value indicating if the Nagle algoritm should be used or not
    /// on the created Socket.
    /// </summary>
    public bool? UseNagleAlgorithm { get; set; } = false;
}

SocketFactory

If you like to tweak socket options, you inject your custom implementation of ISocketFactory to the client:

var client = new NatsClient(cnInfo, new MyMonoOptimizedSocketFactory());

ConsumerFactory

If you like to tweak the scheduling of the consumer task, you can inject a custom implementation of IConsumerFactory. The Consumer is responsible for consuming the incoming socket and to construct Ops which it passes on to the NatsOpMediator which in turn emits the Op to the AllOpsStream and MsgOpsStream (if it's a MsgOp).

Logging

All logging is using the ILogger|ILogger<T> in Microsoft.Extensions.Logging. By default, the Microsoft.Extensions.Logging.Abstractions.NullLoggerFactory is hooked in. This can be replaced by calling MyNatsClient.LoggerManager.UseFactory(yourFactory) during initial startup configuration.

Reads and Writes

The client uses one Socket but two NetworkStreams. One stream for writes and one for reads. The client only locks on writes.

Synchronous and Asynchronous

The Client has both synchronous and asynchronous methods. They are pure versions and NOT sync over async. All async versions uses ConfigureAwait(false).

Observable message streams

The message streams are exposed as Observables. So you can use ReactiveExtensions to consume e.g. the client.OpStream for IOp implementations: ErrOp, InfoOp, MsgOp, PingOp, PongOp. You do this using client.OpStream.Subscribe(...). For MsgOpONLY, use the client.MsgOpStream.Subscribe(...).

//Subscribe to OpStream ALL ops e.g InfoOp, ErrorOp, MsgOp, PingOp, PongOp.
client.OpStream.Subscribe(op =>
{
    Console.WriteLine("===== RECEIVED =====");
    Console.Write(op.GetAsString());
});

//Also proccess PingOp explicitly
client.OpStream.OfType<PingOp>().Subscribe(ping =>
{
    if (!connectionInfo.AutoRespondToPing)
        client.Pong();
});

//Also proccess MsgOp explicitly via filter on ALL OpStream
client.OpStream.OfType<MsgOp>().Subscribe(msg =>
{
    Console.WriteLine("===== MSG =====");
    Console.WriteLine($"Subject: {msg.Subject}");
    Console.WriteLine($"ReplyTo: {msg.ReplyTo}");
    Console.WriteLine($"SubscriptionId: {msg.SubscriptionId}");
    Console.WriteLine($"Payload: {Encoding.UTF8.GetString(msg.Payload)}");
});

//Also proccess MsgOp explicitly via explicit MsgOpStream.
client.MsgOpStream.Subscribe(msg =>
{
    Console.WriteLine("===== MSG =====");
    Console.WriteLine($"Subject: {msg.Subject}");
    Console.WriteLine($"ReplyTo: {msg.ReplyTo}");
    Console.WriteLine($"SubscriptionId: {msg.SubscriptionId}");
    Console.WriteLine($"Payload: {Encoding.UTF8.GetString(msg.Payload)}");
});

OpStream vs MsgOpStream

Why two, you confuse me? Well, in 99% of the cases you probably just care about MsgOp. Then instead of bothering about filtering etc. you just use the MsgOpStream. More efficient and simpler to use.

Stateless

There's no buffering or anything going on with incoming IOp messages. So if you subscribe to a NATS subject using client.Sub(...), but have no in-process subscription against client.IncomingOps, then those messages will just end up in getting discarded.

InProcess Subscribtions vs NATS Subscriptions

The above is in process subscribers and you will not get any IOp dispatched to your handlers, unless you have told the client to subscribe to a NATS subject.

client.Sub("subject");
//OR
await client.SubAsync("subject");

Terminate an InProcess Subscription

The client.IncomingOps.Subscribe(...) returns an IDisposable. If you dispose that, your subscription to the observable is removed.

This will happen automatically if your subscription is causing an unhandled exception.

PLEASE NOTE! The NATS subscription is still there. Use client.Unsub(...) or client.UnsubAsync(...) to let the server know that your client should not receive messages for a certain subject anymore.

Consumer pings and stuff

The Consumer keeps track of how long it was since it got a message from the broker to see if it has taken to long time since it heard from it.

NOTE this only kicks in as long as the client thinks the Socket is connected. If there's a known hard disconnect it will cleanly just get disconnected.

If ConsumerPingAfterMsSilenceFromServer (20000ms) has passed, it will start to PING the server.

If ConsumerMaxMsSilenceFromServer (40000ms) has passed, it will cause an exception and you will get notified via a ClientWorkerFailed event dispatched via client.Events. The Client will also be disconnected, and you will get the ClientDisconnected event, which you can use to reconnect.

Exceptions

Catch exceptions using the AnonymousObserver

Subscribing with the use of an observer makes it easy for you to catch exceptions and handle them.

var c = 0;

//Only the OnNext (the first argument) is required.
var myObserver = new AnonymousObserver<MsgOp>(
  msg =>
  {
    Console.WriteLine($"Observer OnNext got: {msg.GetPayloadAsString()}");

    throw new Exception(c++.ToString());
  },
  err =>
    Console.WriteLine("Observer OnError got:" + err.Message),
  () =>
    Console.WriteLine("Observer completed"));

//Subscribe to subject "test" and hook up the observer
//for incoming messages on that subject
var sub = _client.Sub("test", stream => stream.Subscribe(myObserver));


//Publish some messages
while (true)
{
  Console.WriteLine("Run? (y=yes;n=no)");
  var key = Console.ReadKey().KeyChar;

  Console.WriteLine();
  if (key == 'n')
    break;

  _client.Pub("test", $"test{c.ToString()}");
}

//Tear down subscription (both against NATS server and observable stream)
sub.Dispose();

This will give the following output:

Run? (y=yes;n=no)
y
Run? (y=yes;n=no)
Observer OnNext got: test0
Observer OnError got:0
y
Run? (y=yes;n=no)
Observer OnNext got: test1
Observer OnError got:1
n
Observer completed

Exceptions and "handlers"

The handler will just swallow the exception and continue working.

Changing the subscribing part from the first sample above to:

var sub = _client.Sub("test", stream => stream.Subscribe(msg =>
{
  Console.WriteLine($"Observer OnNext got: {msg.GetPayloadAsString()}");

  throw new Exception(c++.ToString());
}));

This will give the following output:

Run? (y=yes;n=no)
y
Run? (y=yes;n=no)
Observer OnNext got: test0
y
Run? (y=yes;n=no)
Observer OnNext got: test1
y
Run? (y=yes;n=no)
Observer OnNext got: test2
y
Run? (y=yes;n=no)
Observer OnNext got: test3
n

Developement

Certificates for tests

This is only done for testing purposes and should not be used for production use or similar.

More information: https://github.com/paulczar/omgwtfssl

1) Generate certs for CA and Server

docker run --name servercerts -v //c/docker-data/certs/:/certs -e CA_EXPIRE=365 -e SSL_EXPIRE=365 -e SSL_KEY=server-key.pem -e SSL_CERT=server-cert.pem -e SSL_CSR=server.csr -e SSL_SUBJECT=localhost paulczar/omgwtfssl

2) Generate certs for Client (CA files should be kept in mapped folder)

docker run --name clientcerts -v //c/docker-data/certs/:/certs -e CA_EXPIRE=365 -e SSL_EXPIRE=365 -e SSL_KEY=client-key.pem -e SSL_CERT=client-cert.pem -e SSL_CSR=client.csr -e SSL_SUBJECT=localhost paulczar/omgwtfssl

3) Generate PFX

openssl pkcs12 -export -out client.pfx -inkey client-key.pem -in client-cert.pem

Integration tests

The ./.env file and ./src/IntegrationTests/integrationtests.local.json files are .gitignored. In order to create sample files of these, you can run:

. init-local-env.sh

Docker-Compose

There's a docker-compose.yml file, that defines usage of necessary NATS nodes. Credentials are configured via environment key MYNATS_CREDENTIALS__USER and MYNATS_CREDENTIALS__PASS; which can either be specified via:

Environment variable: MYNATS_CREDENTIALS__USER and MYNATS_CREDENTIALS__PASS, e.g.:

MYNATS_CREDENTIALS__USER=sample_user
MYNATS_CREDENTIALS__PASS=sample_password

Docker Environment file ./.env (.gitignored), e.g.:

MYNATS_CREDENTIALS__USER=sample_user
MYNATS_CREDENTIALS__PASS=sample_password

Docker

There's a Dockerfile that can be used to build and run the tests in a container. First spin up the necessary NATS-Server nodes via docker-compose up then you can run docker build --rm -t mynats --network host .

Test configuration

Credentials need to be provided, either via:

Local-JSON-file (.gitignored): ./src/IntegrationTests/integrationtests.local.json, e.g.:

{
  "credentials": {
    "user": "sample_user",
    "pass": "sample_password"
  }
}

Environment variables: MYNATS_CREDENTIALS__USER and MYNATS_CREDENTIALS__PASS, e.g.:

MYNATS_CREDENTIALS__USER=sample_user
MYNATS_CREDENTIALS__PASS=sample_password

License

danielwertheim/mynatsclient

ErrorLooks like something went wrong!

About

Topics

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases 14

Packages 0

Uh oh!

Contributors 5

Uh oh!

Languages

Error
Looks like something went wrong!

Packages