Looking for contributors

Hey there, I'm looking for active contributors to help move the development of this branch forward in a stable and timely fashion. I haven't had a need for this module in quite some time and so my person time is not being allocated to it. If you are interested in contributing more actively, please contact me (same username on Twitter, Facebook, etc.) Thanks!

react-native-camera

A camera module for React Native.

Getting started

Requirements

JDK >= 1.7 (if you run on 1.6 you will get an error on "_cameras = new HashMap<>();")
With iOS 10 and higher you need to add the "Privacy - Camera Usage Description" key to the info.plist of your project. This should be found in 'your_project/ios/your_project/Info.plist'. Add the following code:

<key>NSCameraUsageDescription</key>
<string>Your message to user when the camera is accesseded for the first time</string>

<!-- Include this only if you are planning to use the camera roll -->
<key>NSPhotoLibraryUsageDescription</key>
<string>Your message to user when the photo library is accessed for the first time</string>

<!-- Include this only if you are planning to use the microphone for video recording -->
<key>NSMicrophoneUsageDescription</key>
<string>Your message to user when the microsphone is accessed for the first time</string>

Mostly automatic install with react-native

npm install react-native-camera@https://github.com/lwansbrough/react-native-camera.git --save
react-native link react-native-camera

Mostly automatic install with CocoaPods

npm install react-native-camera@https://github.com/lwansbrough/react-native-camera.git --save
Add the plugin dependency to your Podfile, pointing at the path where NPM installed it:

pod 'react-native-camera', path: '../node_modules/react-native-camera'

Run pod install

Manual install

iOS

npm install react-native-camera@https://github.com/lwansbrough/react-native-camera.git --save
In XCode, in the project navigator, right click Libraries ➜ Add Files to [your project's name]
Go to node_modules ➜ react-native-camera and add RCTCamera.xcodeproj
In XCode, in the project navigator, select your project. Add libRCTCamera.a to your project's Build Phases ➜ Link Binary With Libraries
Click RCTCamera.xcodeproj in the project navigator and go the Build Settings tab. Make sure 'All' is toggled on (instead of 'Basic'). In the Search Paths section, look for Header Search Paths and make sure it contains both $(SRCROOT)/../../react-native/React and $(SRCROOT)/../../../React - mark both as recursive.
Run your project (Cmd+R)

Android

npm install react-native-camera@https://github.com/lwansbrough/react-native-camera.git --save
Open up `android/app/src/main/java/[...]/MainApplication.java

Add import com.lwansbrough.RCTCamera.RCTCameraPackage; to the imports at the top of the file
Add new RCTCameraPackage() to the list returned by the getPackages() method. Add a comma to the previous item if there's already something there.

Append the following lines to android/settings.gradle:

include ':react-native-camera'
project(':react-native-camera').projectDir = new File(rootProject.projectDir, 	'../node_modules/react-native-camera/android')

Insert the following lines inside the dependencies block in android/app/build.gradle:
```
compile project(':react-native-camera')
```

Usage

All you need is to require the react-native-camera module and then use the <Camera/> tag.

'use strict';
import React, { Component } from 'react';
import {
  AppRegistry,
  Dimensions,
  StyleSheet,
  Text,
  TouchableHighlight,
  View
} from 'react-native';
import Camera from 'react-native-camera';

class BadInstagramCloneApp extends Component {
  render() {
    return (
      <View style={styles.container}>
        <Camera
          ref={(cam) => {
            this.camera = cam;
          }}
          style={styles.preview}
          aspect={Camera.constants.Aspect.fill}>
          <Text style={styles.capture} onPress={this.takePicture.bind(this)}>[CAPTURE]</Text>
        </Camera>
      </View>
    );
  }

  takePicture() {
    this.camera.capture()
      .then((data) => console.log(data))
      .catch(err => console.error(err));
  }
}

const styles = StyleSheet.create({
  container: {
    flex: 1
  },
  preview: {
    flex: 1,
    justifyContent: 'flex-end',
    alignItems: 'center',
    height: Dimensions.get('window').height,
    width: Dimensions.get('window').width
  },
  capture: {
    flex: 0,
    backgroundColor: '#fff',
    borderRadius: 5,
    color: '#000',
    padding: 10,
    margin: 40
  }
});

AppRegistry.registerComponent('BadInstagramCloneApp', () => BadInstagramCloneApp);

Properties

`aspect`

Values: Camera.constants.Aspect.fit or "fit", Camera.constants.Aspect.fill or "fill" (default), Camera.constants.Aspect.stretch or "stretch"

The aspect property allows you to define how your viewfinder renders the camera's view. For instance, if you have a square viewfinder and you want to fill the it entirely, you have two options: "fill", where the aspect ratio of the camera's view is preserved by cropping the view or "stretch", where the aspect ratio is skewed in order to fit the entire image inside the viewfinder. The other option is "fit", which ensures the camera's entire view fits inside your viewfinder without altering the aspect ratio.

`iOS` `captureAudio`

Values: true (Boolean), false (default)

Applies to video capture mode only. Specifies whether or not audio should be captured with the video.

`captureMode`

Values: Camera.constants.CaptureMode.still (default), Camera.constants.CaptureMode.video

The type of capture that will be performed by the camera - either a still image or video.

`captureTarget`

Values: Camera.constants.CaptureTarget.cameraRoll (default), Camera.constants.CaptureTarget.disk, Camera.constants.CaptureTarget.temp, ~~Camera.constants.CaptureTarget.memory~~ (deprecated),

This property allows you to specify the target output of the captured image data. The disk output has been shown to improve capture response time, so that is the recommended value. When using the deprecated memory output, the image binary is sent back as a base64-encoded string.

`captureQuality`

Values: Camera.constants.CaptureQuality.high or "high" (default), Camera.constants.CaptureQuality.medium or "medium", Camera.constants.CaptureQuality.low or "low", Camera.constants.CaptureQuality.photo or "photo", Camera.constants.CaptureQuality["1080p"] or "1080p", Camera.constants.CaptureQuality["720p"] or "720p", Camera.constants.CaptureQuality["480p"] or "480p".

This property allows you to specify the quality output of the captured image or video. By default the quality is set to high.

When choosing more-specific quality settings (1080p, 720p, 480p), note that each platform and device supports different valid picture/video sizes, and actual resolution within each of these quality settings might differ. There should not be too much variance (if any) for iOS; 1080p should give 1920x1080, 720p should give 1280x720, and 480p should give 640x480 (note that iOS 480p therefore is NOT the typical 16:9 HD aspect ratio, and the typically-HD camera preview screen may differ greatly in aspect from what you actually record!!). For Android, expect more variance: on most Androids, 1080p should give 1920x1080 and 720p should give 1280x720; however, 480p will at "best" be 853x480 (16:9 HD aspect ratio), but falls back/down to 800x480, 720x480, or "worse", depending on what is closest-but-less-than 853x480 and available on the actual device. If your application requires knowledge of the precise resolution of the output image/video, you might consider manually determine the actual resolution itself after capture has completed (particularly for 480p on Android).

Android also supports Camera.constants.CaptureQuality.preview or "preview" which matches the output image to the same one used in the preview

`type`

Values: Camera.constants.Type.front or "front", Camera.constants.Type.back or "back" (default)

Use the type property to specify which camera to use.

`orientation`

Values: Camera.constants.Orientation.auto or "auto" (default), Camera.constants.Orientation.landscapeLeft or "landscapeLeft", Camera.constants.Orientation.landscapeRight or "landscapeRight", Camera.constants.Orientation.portrait or "portrait", Camera.constants.Orientation.portraitUpsideDown or "portraitUpsideDown"

The orientation property allows you to specify the current orientation of the phone to ensure the viewfinder is "the right way up."

`Android` `playSoundOnCapture`

Values: true (default) or false

This property allows you to specify whether a shutter sound is played on capture. It is currently android only, pending a reasonable mute implementation in iOS.

`onBarCodeRead`

Will call the specified method when a barcode is detected in the camera's view.

Event contains data (the data in the barcode) and bounds (the rectangle which outlines the barcode.)

The following barcode types can be recognised:

aztec
code138
code39
code39mod43
code93
ean13
ean8
pdf417
qr
upce
interleaved2of5 (when available)
itf14 (when available)
datamatrix (when available)

The barcode type is provided in the data object.

`barCodeTypes`

An array of barcode types to search for. Defaults to all types listed above. No effect if onBarCodeRead is undefined.

`flashMode`

Values: Camera.constants.FlashMode.on, Camera.constants.FlashMode.off, Camera.constants.FlashMode.auto

Use the flashMode property to specify the camera flash mode.

`torchMode`

Values: Camera.constants.TorchMode.on, Camera.constants.TorchMode.off, Camera.constants.TorchMode.auto

Use the torchMode property to specify the camera torch mode.

`onFocusChanged: Event { nativeEvent: { touchPoint: { x, y } }`

Called when a touch focus gesture has been made. By default, onFocusChanged is not defined and tap-to-focus is disabled.

`defaultOnFocusComponent`

Values: true (default) false

If defaultOnFocusComponent set to false, default internal implementation of visual feedback for tap-to-focus gesture will be disabled.

`onZoomChanged: Event { nativeEvent: { velocity, zoomFactor } }`

Called when focus has changed. By default, onZoomChanged is not defined and pinch-to-zoom is disabled.

`iOS` `keepAwake`

If set to true, the device will not sleep while the camera preview is visible. This mimics the behavior of the default camera app, which keeps the device awake while open.

`mirrorImage`

If set to true, the image returned will be mirrored.

Component instance methods

You can access component methods by adding a ref (ie. ref="camera") prop to your <Camera> element, then you can use this.refs.camera.capture(cb), etc. inside your component.

`capture([options]): Promise`

Captures data from the camera. What is captured is based on the captureMode and captureTarget props. captureMode tells the camera whether you want a still image or video. captureTarget allows you to specify how you want the data to be captured and sent back to you. See captureTarget under Properties to see the available values.

Supported options:

audio (See captureAudio under Properties)
mode (See captureMode under Properties)
target (See captureTarget under Properties)
metadata This is metadata to be added to the captured image.
- location This is the object returned from navigator.geolocation.getCurrentPosition() (React Native's geolocation polyfill). It will add GPS metadata to the image.
rotation This will rotate the image by the number of degrees specified.

The promise will be fulfilled with an object with some of the following properties:

data: Returns a base64-encoded string with the capture data (only returned with the deprecated Camera.constants.CaptureTarget.memory)
path: Returns the path of the captured image or video file on disk
width: (currently iOS video only) returns the video file's frame width
height: (currently iOS video only) returns the video file's frame height
duration: (currently iOS video only) video file duration
size: (currently iOS video only) video file size (in bytes)

`iOS` `getFOV(): Promise`

Returns the camera's current field of view.

`hasFlash(): Promise`

Returns whether or not the camera has flash capabilities.

`stopCapture()`

Ends the current capture session for video captures. Only applies when the current captureMode is video.

Component static methods

`iOS` `Camera.checkDeviceAuthorizationStatus(): Promise`

Exposes the native API for checking if the device has authorized access to the camera (camera and microphone permissions). Can be used to call before loading the Camera component to ensure proper UX. The promise will be fulfilled with true or false depending on whether the device is authorized.

`iOS` `Camera.checkVideoAuthorizationStatus(): Promise`

The same as Camera.checkDeviceAuthorizationStatus() but only checks the camera permission.

`iOS` `Camera.checkAudioAuthorizationStatus(): Promise`

The same as Camera.checkDeviceAuthorizationStatus() but only checks the microphone permission.

Subviews

This component supports subviews, so if you wish to use the camera view as a background or if you want to layout buttons/images/etc. inside the camera then you can do that.

Example

To see more of the react-native-camera in action, you can check out the source in Example folder.

Thanks to Brent Vatne (@brentvatne) for the react-native-video module which provided me with a great example of how to set up this module.

License

witworks/react-native-camera

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages