gradle-xcodePlugin

gradle xcodePlugin to build Mac and iOS projects

Current stable version is 0.9.12

0.9.12 supports both Xcode 5 and Xcode 6 (beta)

Introduction: http://openbakery.org/gradle.php

Example: build.gradle

xcodebuild Parameters:

scheme - the xcode build scheme that should be used. If the scheme is set the configuration and target is ignored

default value: empty
workspace - the workspace file that should be used for the build.

default value: empty
configuration - the build configuration name that should be used (e.g. 'Debug', 'Release')

default value: 'Debug'
sdk - the SDK that should be used (e.g. 'iphonesimulator', 'iphoneos')

default value: 'iphonesimulator'
target - the xcode build target that should be used

default value: empty
signing - signing configuration that should be used when building for the device

default value: empty
- mobileProvisionURI - URI where the mobile provision profile is located that should be used when signing the app
  
  default value: empty
- certificateURI - Uri to the certificate that should be used to sign the app
  
  default value: empty
- certificatePassword - Password for the certificate file
  
  default value: empty
- keychainPassword - Password for the chain that is created
  
  default value: "This_is_the_default_keychain_password"
- keychain - Parameter to specify an existing keychain. If this parameters is set no keychain is created and also the certificate is not imported.
  
  default value: empty
  
  Note: Make sure that /usr/bin/codesign is allowed to access the certificate in the keychain that is needed to sign.
destination * - destination configuration, that is used for the unit test execution

default value: empty (When empty alls available simulators are used for the unit tests)

Note when building using the iPhoneSimulator: The destinations are verified if they already exists. If not then the destination is ignored for the unit test. If no valid destination is specified, then all available simulator destinations are used for the unit tests. Therefor you can specify destinations to limit on which simulator destinations the unit tests are performed. You also can specify a regular expression for the value and all available simulator devices are included that match these value: e.g. name = 'iPhone.*'
- platform - Platform, e.g. 'iOS' or 'OS X'
default value: empty
- name - Name of the destination device.
default value: empty
- arch - Architecture of the destination target
The arch can a single value e.g. 'i386' or a list of values e.g. [ 'armv7', 'armv7s' ]

default value: empty
additionalParameters - additional parameters for the xcodebuild. Here you can for example pass preprocessor definitions: additionalParameters = "GCC_PREPROCESSOR_DEFINITIONS='TIME=" + System.currentTimeMillis() + "'".

Also an array of parameters is excepted e.g. ["-xcconfig", "/path/to/the/xconfig" ]

default value: empty
bundleNameSuffix - String that should be appended to the generated app bundle. e.g. the default app bundle name is 'Demo.App'. When you set bundleNameSuffix=-1.0.0 than the generated bundle is 'Demo-1.0.0.app'

default value: empty
arch - Use the architecture specified by architecture when building each target. e.g. 'i386', 'armv6', 'armv7'

default value: empty

NOTE: when scheme and workspace is set and also the sdk value is 'iphonesimulator' that the arch is set per default to the value 'i386', otherwise a simulator build fails
buildRoot - build root directory for the build output

default value: build
dstRoot - the distribution root directory

default value: 'build/dst'
objRoot - the object root directory

default value: 'build/obj'
symRoot - the sym directory. Here is where the app and ipa is generated

default value: 'build/sym'
sharedPrecompsDir

default value: 'build/shared'
infoPlist - override the Info.plist file that is configured in the xcode project file

default value: empty

infoplist Parameters:

bundleIdentifier - If set it override the bundle identifier in the Info.plist (CFBundleIdentifier)

default value: empty
bundleIdentifierSuffix - If set it adds a suffix to the bundle identifier in the Info.plist (CFBundleIdentifier)

default value: empty
bundleDisplayName - If set it override the bundle display name in the Info.plist (CFBundleDisplayName)

default value: empty
bundleDisplayNameSuffix - If set it adds a suffix to the bundle display name in the Info.plist (CFBundleDisplayName)

default value: empty
version - sets the CFBundleVersion to the given version Note: version=2.3.4 and versionSuffix=-Suffix and versionPrefix=Prefix- results in 'Prefix-2.3.4-Suffix'

default value: empty
versionSuffix - adds the value to the CFBundleVersion e.g. 'CFBundleVersion=1.0.0' and 'versionSuffix=-Test' results in '1.0.0-Test'

default value: empty
versionPrefix - adds the value in front of the CFBundleVersion e.g. 'CFBundleVersion=1.0.0' and 'versionPrefix=Test-' results in 'Test-1.0.0'

default value: empty
shortVersionString - sets the CFBundleShortVersionString to the given shortVersionString

default value: empty
shortVersionStringSuffix - adds the value to the CFBundleVersion e.g. 'CFBundleShortVersionString=1.0.0' and 'versionSuffix=-Test' results in '1.0.0-Test'

default value: empty
shortVersionStringPrefix - adds the value in front of the CFBundleVersion e.g. 'CFBundleShortVersionString=1.0.0' and 'versionPrefix=Test-' results in 'Test-1.0.0'

default value: empty
commands - adds commands to modify the info plist that are excuted with the plistbuddy tool (see also 'man PlistBuddy' )

default value: empty

Example: This commands modify the URL scheme.

	commands = [
		'Delete CFBundleURLTypes:0:CFBundleURLSchemes',
		'Add CFBundleURLTypes:0:CFBundleURLSchemes array',
		'Add CFBundleURLTypes:0:CFBundleURLSchemes:0 string newscheme'
	]

hockeykit Parameters:

displayName - Title that should be used that is shown on the hockeykit site for the app. If the value is not set then the bundle identifier is used

default value: the CFBundleDisplayName from the Info.plist file is used
versionDirectoryName - subdirectory that should be used for the app.

default value: "0"
outputDirectory - directory where to store the files that are generated for the hockeykit distribution

default value "build/hockeykit";
notes - Release notes as HTML or Markdown for the build that is stored in a releasenotes.html.

default value: empty

TestFlight Parameters:

apiToken - The TestFlight API Token (https://testflightapp.com/account/#api-token)

default value: empty
teamToken - The TestFlight Team Token (https://testflightapp.com/dashboard/team/edit/?next=/api/doc/)

default value: empty
notes - Release notes for the build

default value: "This build was uploaded using the gradle xcodePlugin"
outputDirectory - Output directory where the ipa an dSYM.zip is created

default value: "build/testflight"
distributionLists - Comma separated distribution list names which will receive access to the build

default value: empty
notifyDistributionList - notify permitted teammates to install the build

default value: false
replaceBuild - replace binary for an existing build if one is found with the same name/bundle version

default value: false

Note: see also https://testflightapp.com/api/doc/

HockeyApp Parameters:

apiToken - The HockeyApp API Token (see https://rink.hockeyapp.net/manage/auth_tokens )

default value: empty
appID - The HockeyApp App ID (see https://rink.hockeyapp.net/manage/dashboard and select the app)

default value: empty
outputDirectory - Optional, output directory where the ipa an dSYM.zip is created

default value: "build/hockeyapp"
notes - Release notes for the build

default value: "This build was uploaded using the gradle xcodePlugin"
status - Optional, download status (can only be set with full-access tokens):

default value: 2
notify - Optional, notify testers

default value: 1
notesType - Optional, type of release notes

default value: 1

DeployGate Parameters:

apiToken - The DeployGate API Token (https://deploygate.com/settings)

default value: empty
userName - The DeployGate User Name (https://deploygate.com/settings)

default value: empty
message - Release notes for the build

default value: "This build was uploaded using the gradle xcodePlugin"
outputDirectory - Output directory where the ipa

default value: "build/deploygate"

Note: see also https://deploygate.com/docs/api

sparkle Parameters:

appName - You should specify this parameter when your appname does not match your target name. Default appname in XCode is $(TARGET_NAME). Do not specify .app here because it will be added automatically. If a different file ending than .app will be needed in future we will add a new parameter.

default value: empty
outputDirectory - The directory to output a ZIP file and release notes of the app.

default value: empty

coverage Parameters:

Note: For coverage the the "Generate Test Coverage Files" in the project for the executed target must be set to Yes

exclude - Exclude data files that match this regular expression. e.g. '.*h$|.*UnitTests.*m$' excludes all headers and all *.m files from the UnitTests directory

default value: empty
outputFormat - Format of the generated output. Possible values are, xml or html. If not specified text file is generated

default value: empty
outputDirectory - Output directory for the results

default value: "build/coverage"

License

Xperiel/gradle-xcodePlugin

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Error
Looks like something went wrong!

Packages