Blank Canvas Cape user-space driver

This project provides a user-space application for configuring the Blank Canvas Cape (BCC), a Beaglebone cape which provides a Xilinx Spartan 3A FPGA connected to the Beaglebone I/O connectors. Find out more details about the BCC here:

http://ebrombaugh.studionebula.com/embedded/bcc/index.html

In addition to the application, an underlying interface library is also provided which facilitates creation of additional applications for interfacing to the FPGA via the SPI interface.

Building & Installing

In order to build/install the bcc_tool do the following.

Clone the repository
cd to the directory containing the source files
Execute the configure script: $ ./configure
Build the files: $ make
Install the library and tool: $ sudo make install
Run ldconfig to load new librarys for development: $ sudo ldconfig

bcc_tool

This is the application. Usage is as follows:

bcc_tool [-f freq][-p][-r addr][-w addr data][-v][-V] [BITSTREAM]

BITSTREAM is a file containing the FPGA bitstream to download to the FPGA or configuration flash. With no other options the application will quietly configure the FPGA with the contents of BITSTREAM.

-p program the SPI Flash configuration memory with BITSTREAM.

This option redirects the contents of BITSTREAM into the on-board configuration flash memory so that it is immediately available on power-up.

Note that in order to route the SPI signals to the flash memory it is necessary to first configure the FPGA with a special bitstream that provides the proper connections. This bitstream is provided at the above website, along with full source code for creating it.

-r read SPI control port at addr

This option allows a quick check of SPI communications with the SPI slave port in the FPGA by reading from the slave port at the provided address. This can also be used to check status and results from any functions attached to the SPI slave.

-w write SPI control port at addr w/ data

This option allows a quick check of SPI communications with the SPI slave port in the FPGA by writing data to a specific address. This can also be used to control & configure any functions that are attached to the SPI slave.

-v enables verbose progress messages

This option provides detailed progress information on the process of communicating with the FPGA. Use this to debug any problems with the application.

-V prints the tool version

bcc_lib

This is the underlying access library which provides all the interfaces needed to configure the FPGA, program the SPI flash configuration memory and communicate with the SPI slave. The following functions are available:

int bcc_i2c_get_prom(bfpga *s, int saddr, __u8 loc);

int bcc_i2c_set_prom(bfpga *s, int saddr, __u8 loc, __u8 dat);

int bcc_i2c_get(bfpga *s, int saddr);

int bcc_i2c_set(bfpga *s, int saddr, __u8 dat);

int bcc_i2c_pcf_rd(bfpga *s, int bit);

void bcc_i2c_pcf_wr(bfpga *s, int bit, int val);

int bcc_spi_txrx(bfpga *s, uint8_t *tx, uint8_t *rx, __u32 len);

bfpga *bcc_init(int i2c_bus, int spi_bus, int spi_add, int verbose);

FILE *bfpga_open_bitfile(bfpga *s, char *bitfile, long *n);

int bcc_cfg(bfpga *s, char *bitfile);

int bcc_pgm(bfpga *s, char *bitfile);

void bcc_delete(bfpga *s);

Usage details can be inferred from the source.

E. Brombaugh 11-24-2012

emeb/bcc_lib

ErrorLooks like something went wrong!

About

Resources

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages