Apache Camel - Kamelet Catalog

This repository contains the default Kamelet catalog used by Apache Camel and its sub-projects.

Kamelets in this repository can be used natively in Camel K, Camel, Camel-Quarkus and Camel-spring-boot integrations, without additional configuration steps. Users just need to reference the Kamelets by name in the URI (e.g. kamelet:timer-source?message=Hello), or use them in a Pipe, for Camel K, in particular.

Note

Camel K (and other sub-projects) will only use a specific version of this Kamelet catalog. Refer to the release notes of the sub-project for more information.

Documents and guides about Kamelets can be found in the Kamelets User and Developer Guides.

Guidelines for contributions

Kamelets in this repository are intended to be generic connectors that any external platform can embed in order to leverage the Apache Camel integration capabilities.

All Kamelets posted here will be subject to the scrutiny of the Apache Camel PMC to assess their compliance with the ecosystem and, in any case, they MUST be in line with the general Apache Code of Conduct.

Building and validating

Building the project:

$ ./mvnw clean install

Important

After adding or modifying a kamelet remember to generate:

$ cd script/generator
$ go run . ../../kamelets/ ../../docs/modules/ROOT/

and validate:

$ cd script/validator
$ go run . ../../kamelets/

be sure that there aren't reported ERRORS.

General Format

Kamelets MUST be provided in the Kubernetes YAML format, i.e. they MUST be resources that can be applied on a cluster using the Kubernetes kubectl CLI.

The file name of each Kamelet MUST follow this specific pattern: <kamelet-name>.kamelet.yaml. The <kamelet-name> MUST match field metadata -> name inside the Kamelet YAML.

For the time being, we'll accept only these kinds of Kamelets:

Sources: Kamelets producing data that can be forwarded to any chosen destination. In the Camel jargon, a source can be used consumer-side. Kamelets belonging to this category MUST be marked with label: camel.apache.org/kamelet.type=source.
Sinks: Kamelets that accept data with a specific datashape and forward it to an external system. In the Camel jargon, a sink can be used producer-side. Kamelets belonging to this category MUST be marked with label: camel.apache.org/kamelet.type=sink.
Actions: Kamelets that can be used as intermediate steps as they both accept and produce data, applying transformations to it or changing the behavior of the whole integration flow (e.g. using enterprise integration patterns). Kamelets belonging to this category MUST be marked with label: camel.apache.org/kamelet.type=action.

All Kamelets MUST provide a value for label camel.apache.org/kamelet.type.

All Kamelets MUST declare an icon in the camel.apache.org/kamelet.icon annotation using the embedded URL data:image format. An icon annotation CANNOT contain a link to an external location. A Kamelet SHOULD use the specific data:image/svg+xml;base64 format whenever it's possible.

Kamelets that are logically related (e.g. all Kamelets that allow doing things with Twitter) SHOULD be linked together using the label camel.apache.org/kamelet.group=<name of the group> (e.g. camel.apache.org/kamelet.group=Twitter) to ease visualization in tooling.

All Kamelets present in this repository MUST have the annotation camel.apache.org/provider set to "Apache Software Foundation".

We provide an example of Kamelet to give more context to the following sections:

apiVersion: camel.apache.org/v1
kind: Kamelet
metadata:
  name: timer-source
  annotations:
    camel.apache.org/kamelet.icon: data:image/svg+xml;base64,PD94...
    camel.apache.org/provider: "Apache Software Foundation"
  labels:
    camel.apache.org/kamelet.type: source
spec:
  definition:
    title: Timer Source
    description: Produces periodic events with a custom payload
    required:
      - message
    properties:
      period:
        title: Period
        description: The interval between two events in milliseconds
        type: integer
        default: 1000
      message:
        title: Message
        description: The message to generate
        type: string
        example: hello world
  types:
    out:
      mediaType: text/plain
  template:
    from:
      uri: timer:tick
      parameters:
        period: "{{period}}"
      steps:
        - set-body:
            constant: "{{message}}"
        - to: kamelet:sink

Template Code

The Camel route that defines the behavior of the Kamelet MUST be provided in YAML flow syntax (in .spec.template parameter). The Kamelet MAY declare additional supporting routes that MUST be written in YAML syntax (to provide better support in all Camel subprojects).

The code of a "source" Kamelet must send data to the kamelet:sink special endpoint. The code of a "sink" Kamelet must consume data from the special endpoint kamelet:source.

The Kamelet MAY declare dependencies on Camel components using the syntax camel:<component-name> (e.g. camel:telegram). Some Camel dependencies are implicitly added by the runtime when a certain Camel URI is used (e.g. there's no need to declare explicit dependency on camel:timer if the template section uses the timer URI).

The Kamelet CAN declare dependencies on artifacts of one of the Camel subprojects. In case it does, the Kamelet must contain label camel.apache.org/requires.runtime=<name-of-the-project> (e.g. camel.apache.org/requires.runtime=camel-quarkus).

The Kamelet CAN declare dependencies on other artifacts in Maven Central, provided that they are released with a license compatible with Apache License 2.0 (syntax is mvn:group:artifact:version).

All source code dependencies (e.g. github:organization:project) MUST link to Apache Camel repositories only. Contributors are welcome to use this same repository to share libraries in the form of source code.

All these should be added to the spec -> dependencies section, like in the following example:

# ...
spec:
  # ...
  dependencies:
  - camel:telegram
  - mvn:org.apache.commons:commons-vfs2:2.7.0
  - github:apache/camel-kamelets
  template:
    # ...

Configuration properties

Kamelets SHOULD declare their configuration properties in the spec -> definition section as a JSON-schema specification.

The top-level part of the JSON-schema document refer to the Kamelet itself, so the following properties are MANDATORY:

title: the visual name of the Kamelet
description: a detailed description of what the Kamelet is useful for

The properties part can then contain a set of configuration properties available for the Kamelet.

Property name id is reserved and implicit for all Kamelets.

Data Types

Kamelets SHOULD declare the mediaType of data that they produce or consume when it's known in advance. If technically possible, they SHOULD also indicate the schema of the corresponding data.

Kamelets MAY choose not to declare a mediaType when it varies depending on the configuration of the parameters. Contributors MAY consider to split a Kamelet into multiple instances if that can help determining unique types and schemas.

Testing

Kamelets SHOULD be accompanied with testing code that verifies their correct behavior.

Yaks is the testing framework of choice for Kamelets and the one implemented in the CI.

Test code must be submitted in the test/<kamelet-name>/ directory in the root of this repository.

Kamelets submitted with tests that verify their correctness MUST be labeled with camel.apache.org/kamelet.verified=true.

Note

There's no way at the moment to inject credentials for external systems into the CI in order to write more advanced tests, but we can expect we'll find an usable strategy in the long run.

Kamelet Pipe Examples

Pipe examples are highly encouraged to be added under templates/pipes/camel-k directory for Kamelet Pipe and templates/pipes/core for the YAML routes.

When the Kamelet Catalog documentation is generated, the examples in each Kamelet documentation page are automatically generated, but the generator code is not wise enough and it may generate a Kamelet Pipe that doesn't work, requiring additional steps. In this case, the pipe example should be added to the above mentioned directories, and add the comment marker at the first line "# example_for_kamelet_doc" only in the Camel K Kamelet Pipe example (in templates/pipes/camel-k). When the documentation mechanism runs, it will source this pipe example into the kamelet documentation page as example.

Releasing

This project is released as standard Apache Camel module.

To release it, first set the next release version in the kamelets:

export CAMEL_KAMELET_VERSION=x.y.z

./mvnw clean install -DreleaseVersion=$CAMEL_KAMELET_VERSION

Stage the commits in the Source Version Control:

git commit -am "Update Kamelets for release $CAMEL_KAMELET_VERSION"

git push upstream main

Check that everything is alright with a dryRun:

./mvnw release:prepare -Prelease \
  -DdryRun \
  -DreleaseVersion=$CAMEL_KAMELET_VERSION \
  -DdevelopmentVersion=<next_snapshot> \
  -Dtag=v$CAMEL_KAMELET_VERSION

Check the signatures of the files, then clean and prepare the actual release:

./mvnw release:clean -Prelease
./mvnw release:prepare -Prelease \
  -DreleaseVersion=$CAMEL_KAMELET_VERSION \
  -DdevelopmentVersion=<next_snapshot> \
  -Dtag=v$CAMEL_KAMELET_VERSION

Then perform the release:

./mvnw release:perform -Prelease

Go to https://repository.apache.org/ and close the staging repository.

A URL will be generated for the repository, like: https://repository.apache.org/content/repositories/orgapachecamel-xxxx. The URL needs to be communicated during the voting process.

Now run:

cd release-utils/scripts/
./upload-source.sh $CAMEL_KAMELET_VERSION $CAMEL_KAMELET_VERSION

You'll be requested to insert the password to unlock the secret key to sign the artifacts and after uploading to nexus dev repository.

You could verify the result at the following URL:

https://dist.apache.org/repos/dist/dev/camel/camel-kamelets/<$CAMEL_KAMELET_VERSION>

Restore Kamelets:

./mvnw clean install

Update remote git:

git commit -am "Restore Kamelets for development"

git push upstream main

Send an email to dev mailing list to start the vote.

Post Release

Once the vote for the release has been completed, you need to send the Vote Result mail to mailing list.

Now, you'll need to release the artifacts from Apache staging repositories to Apache releases repository.

To do this you'll need to access the Apache Nexus Server.

You'll need then to promote the release from dist/dev location to dist/release location.

There is an handy script for this:

Now run:

cd release-utils/scripts/
./promote-release.sh $CAMEL_KAMELET_VERSION

Updating documentation version

If we are talking about a minor release, it will be enough to edit the 'docs/antora.yml' file like this:

name: camel-kamelets
title: Kamelet Catalog
version: 0.9.x

nav:
- modules/ROOT/nav.adoc

asciidoc:
  attributes:
    requires: "'util=camel-website-util,kamelets=xref:js/kamelets.js'"
    # Update to appropriate released camel-k version on release
    version-used: true
    camel-k-version: 1.10.1
    camel-k-docs-version: 1.10.x
#    camel-kafka-connector-version: none
#    camel-kafka-connector-docs-version: none
    camel-version: 3.18.2
    camel-docs-version: 3.18.x

and modify the values accordingly.

After this step you'll need to open a PR to Camel-Website for listing the release. The location is the following: https://github.com/apache/camel-website/tree/main/content/releases/k

In the case of a major release, you'll need to create a new branch from the tag release.

You'll need to align the antora.yml file in docs accordingly.

After this step you'll need to open a PR to Camel-Website for listing the release. The location is the following: https://github.com/apache/camel-website/tree/main/content/releases/k

And also adding the branch to the documentation to be published here: https://github.com/apache/camel-website/blob/main/antora-playbook-snippets/antora-playbook.yml

In the camel-kamelets section.

License

XLAQO/camel-kamelets

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages