TinyUF2 Bootloader

This repo is cross-platform UF2 Bootloader projects for MCUs based on TinyUSB

.
├── apps              # Useful applications such as self-update, erase firmware
├── lib               # Sources from 3rd party such as tinyusb, mcu drivers ...
├── ports             # Port/family specific sources
│   ├── espressif
│   │   └── boards/   # Board specific sources
│   │   └── Makefile  # Makefile for this port
│   └── mimxrt10xx         
├── src               # Cross-platform bootloader sources files

Features

Supported features are

Double tap to enter DFU, reboot to DFU and quick reboot from application
DFU with MassStorage (MSC)
Self update with uf2 file
Indicator: LED, RGB, TFT
Debug log with uart/swd

Not all features are implemented for all MCUs, following is supported MCUs and its feature

MCU	MSC	Double Reset	Self-update	Write Protection	Neopixel	TFT
ESP32 S2/S3	✔	Need RC	✔		✔	✔
K32L2	✔	✔
LPC55	✔	✔			✔
iMXRT	✔	✔	✔		✔
STM32F3	✔	✔	✔	✔	✔
STM32F4	✔	✔	✔	✔	✔

Build and Flash

Following is generic compiling information. Each port may require extra set-up and slight different process e.g esp32s2 require setup IDF.

Compile

To build this for a specific board, we need to change current directory to its port folder

$ cd ports/stm32f4

Firstly we need to get all of submodule dependecy for our board e.g mcu driver with get-deps target. You only need to do this once for each mcu family

make BOARD=feather_stm32f405_express get-deps

Then compile with all target:

make BOARD=feather_stm32f405_express all

Flash

flash target will use the default on-board debugger (jlink/cmsisdap/stlink/dfu) to flash the binary, please install those support software in advance. Some board use bootloader/DFU via serial which is required to pass to make command

$ make BOARD=feather_stm32f405_express flash

If you use an external debugger, there is flash-jlink, flash-stlink, flash-pyocd which are mostly like to work out of the box for most of the supported board.

Debug

To compile for debugging add DEBUG=1, this will mostly change the compiler optimization

$ make BOARD=feather_stm32f405_express DEBUG=1 all

Log

Should you have an issue running example and/or submitting an bug report. You could enable TinyUSB built-in debug logging with optional LOG=.

LOG=1 will print message from bootloader and error if any from TinyUSB stack.
LOG=2 and LOG=3 will print more information with TinyUSB stack events

$ make BOARD=feather_stm32f405_express LOG=1 all

Logger

By default log message is printed via on-board UART which is slow and take lots of CPU time comparing to USB speed. If your board support on-board/external debugger, it would be more efficient to use it for logging. There are 2 protocols:

$ make BOARD=feather_stm32f405_express LOG=2 LOGGER=rtt all
$ make BOARD=feather_stm32f405_express LOG=2 LOGGER=swo all

License

ladyada/tinyuf2

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Uh oh!

Languages

Error
Looks like something went wrong!

Packages