Sunone Aimbot C++

Ready-to-Use Builds (Recommended)

You do NOT need to compile anything if you just want to use the aimbot! Precompiled .exe builds are provided for both CUDA (NVIDIA only) and DirectML (all GPUs).

DirectML (DML) Build — Universal (All GPUs)

Works on:
- Any modern GPU (NVIDIA, AMD, Intel, including integrated graphics)
- Windows 10/11 (x64)
- No need for CUDA or special drivers!
Recommended for:
- GTX 10xx/9xx/7xx series (old NVIDIA)
- Any AMD Radeon or Intel Iris/Xe GPU
- Laptops and office PCs with integrated graphics
Download DML build: DirectML Release

CUDA + TensorRT Build — High Performance (NVIDIA Only)

Works on:
- NVIDIA GPUs GTX 1660, RTX 2000/3000/4000 or newer
- Requires: CUDA 12.8, TensorRT 10.8 (included in build)
- Windows 10/11 (x64)
Not supported: GTX 10xx/Pascal and older (TensorRT 10 limitation)
Includes both CUDA+TensorRT and DML support (switchable in settings)
Download CUDA build: DML + CUDA + TensorRT Release

Both versions are ready-to-use: just download, unpack, run ai.exe and follow instructions in the overlay.

How to Run (For Precompiled Builds)

Download and unpack your chosen version (see links above).
For CUDA build, install CUDA 12.8 if not already installed.
For DML build, no extra software is needed.
Run ai.exe. On first launch, the model will be exported (may take up to 5 minutes).
Place your .onnx model in the models folder and select it in the overlay (HOME key).
All settings are available in the overlay. Use the HOME key to open/close overlay.

Controls

Right Mouse Button: Aim at the detected target
F2: Exit
F3: Pause aiming
F4: Reload config
Home: Open/close overlay and settings

Build From Source (Advanced Users)

If you want to compile the project yourself or modify code, follow these instructions.

1. Requirements

Visual Studio 2022 Community (Download)
Windows 10 or 11 (x64)
Windows SDK 10.0.26100.0 or newer
CMake (Download)
OpenCV 4.10.0
[For CUDA version]
[For DML version]
- You can use pre-built OpenCV DLLs (just copy opencv_world4100.dll to your exe folder)
Other dependencies:
- simpleIni
- serial
- GLFW
- ImGui

2. Choose Build Target in Visual Studio

DML (DirectML): Select Release | x64 | DML (works on any modern GPU)
CUDA (TensorRT): Select Release | x64 | CUDA (requires supported NVIDIA GPU, see above)

3. Placement of Third-Party Modules and Libraries

Before building the project, download and place all third-party dependencies in the following directories inside your project structure:

Required folders inside your repository:

sunone_aimbot_cpp/
└── sunone_aimbot_cpp/
    └── modules/

Place each dependency as follows:

Library	Path
SimpleIni	`sunone_aimbot_cpp/sunone_aimbot_cpp/modules/SimpleIni.h`
serial	`sunone_aimbot_cpp/sunone_aimbot_cpp/modules/serial/`
TensorRT	`sunone_aimbot_cpp/sunone_aimbot_cpp/modules/TensorRT-10.8.0.43/`
GLFW	`sunone_aimbot_cpp/sunone_aimbot_cpp/modules/glfw-3.4.bin.WIN64/`
OpenCV	`sunone_aimbot_cpp/sunone_aimbot_cpp/modules/opencv/`
cuDNN	`sunone_aimbot_cpp/sunone_aimbot_cpp/modules/cudnn/`

SimpleIni: Download SimpleIni.h Place in modules/.
serial: Download the serial library (whole folder). To build, open
```
sunone_aimbot_cpp/sunone_aimbot_cpp/modules/serial/visual_studio/visual_studio.sln
```
- Set C/C++ > Code Generation > Runtime Library to Multi-threaded (/MT)
- Build in Release x64
- Use the built DLL/LIB with your project.
TensorRT: Download TensorRT 10.8.0.43 Place the folder as shown above.
GLFW: Download GLFW Windows binaries Place the folder as shown above.
OpenCV: Use your custom build or official DLLs (see CUDA/DML notes below). Place DLLs either next to your exe or in modules/opencv/.
cuDNN: Place cuDNN files here (for CUDA build): sunone_aimbot_cpp/sunone_aimbot_cpp/modules/cudnn/

Example structure after setup:

sunone_aimbot_cpp/
└── sunone_aimbot_cpp/
    └── modules/
        ├── SimpleIni.h
        ├── serial/
        ├── TensorRT-10.8.0.43/
        ├── glfw-3.4.bin.WIN64/
        ├── opencv/
        └── cudnn/

4. How to Build OpenCV 4.10.0 with CUDA Support (For CUDA Version Only)

This section is only required if you want to use the CUDA (TensorRT) version and need OpenCV with CUDA support. For DML build, skip this step — you can use the pre-built OpenCV DLL.

Step-by-step instructions:

Download Sources
- OpenCV 4.10.0
- OpenCV Contrib 4.10.0
- CMake
- CUDA Toolkit 12.8
- cuDNN 9.7.1
Prepare Directories
- Create: sunone_aimbot_cpp/sunone_aimbot_cpp/modules/opencv/ sunone_aimbot_cpp/sunone_aimbot_cpp/modules/opencv/build
- Extract opencv-4.10.0 into sunone_aimbot_cpp/sunone_aimbot_cpp/modules/opencv/opencv-4.10.0
- Extract opencv_contrib-4.10.0 into sunone_aimbot_cpp/sunone_aimbot_cpp/modules/opencv/opencv_contrib-4.10.0
- Extract cuDNN to sunone_aimbot_cpp/sunone_aimbot_cpp/modules/cudnn
Configure with CMake
- Open CMake GUI
- Source code: sunone_aimbot_cpp/sunone_aimbot_cpp/modules/opencv/opencv-4.10.0
- Build directory: sunone_aimbot_cpp/sunone_aimbot_cpp/modules/opencv/build
- Click Configure (Choose "Visual Studio 17 2022", x64)
Enable CUDA Options
- After first configure, set the following:
  - WITH_CUDA = ON
  - WITH_CUBLAS = ON
  - ENABLE_FAST_MATH = ON
  - CUDA_FAST_MATH = ON
  - WITH_CUDNN = ON
  - CUDNN_LIBRARY = full_path_to/sunone_aimbot_cpp/sunone_aimbot_cpp/modules/cudnn/lib/x64/cudnn.lib
  - CUDNN_INCLUDE_DIR = full_path_to/sunone_aimbot_cpp/sunone_aimbot_cpp/modules/cudnn/include
  - CUDA_ARCH_BIN = See CUDA Wikipedia for your GPU. Example for RTX 3080-Ti: 8.6
  - OPENCV_DNN_CUDA = ON
  - OPENCV_EXTRA_MODULES_PATH = full_path_to/sunone_aimbot_cpp/sunone_aimbot_cpp/modules/opencv/opencv_contrib-4.10.0/modules
  - BUILD_opencv_world = ON
- Uncheck:
  - WITH_NVCUVENC
  - WITH_NVCUVID
- Click Configure again (make sure nothing is reset)
- Click Generate
Build in Visual Studio
- Open sunone_aimbot_cpp/sunone_aimbot_cpp/modules/opencv/build/OpenCV.sln or click "Open Project" in CMake
- Set build config: x64 | Release
- Build ALL_BUILD target (can take up to 2 hours)
- Then build INSTALL target
Copy Resulting DLLs
- DLLs: sunone_aimbot_cpp/sunone_aimbot_cpp/modules/opencv/build/install/x64/vc16/bin/
- LIBs: sunone_aimbot_cpp/sunone_aimbot_cpp/modules/opencv/build/install/x64/vc16/lib/
- Includes: sunone_aimbot_cpp/sunone_aimbot_cpp/modules/opencv/build/install/include/opencv2
- Copy needed DLLs (opencv_world4100.dll, etc.) next to your project’s executable.

5. Notes on OpenCV for CUDA/DML

For CUDA build (TensorRT backend):
- You must build OpenCV with CUDA support (see the guide above).
- Place all built DLLs (e.g., opencv_world4100.dll) next to your executable or in the modules folder.
For DML build (DirectML backend):
- You can use the official pre-built OpenCV DLLs if you only plan to use DirectML.
- If you want to use both CUDA and DML modes in the same executable, you should always use your custom OpenCV build with CUDA enabled (it will work for both modes).
Note: If you run the CUDA backend with non-CUDA OpenCV DLLs, the program will not work and may crash due to missing symbols.

6. Build and Run

Open the solution in Visual Studio 2022.
Choose your configuration (Release | x64 | DML or Release | x64 | CUDA).
Build the solution.
Run ai.exe from the output folder.

🔄 Exporting AI Models

Convert PyTorch .pt models to ONNX:

pip install ultralytics -U
yolo export model=sunxds_0.5.6.pt format=onnx dynamic=true simplify=true

To convert .onnx to .engine for TensorRT, use the overlay export tab (open overlay with HOME).

🗂️ Old Releases

Legacy and old versions

📋 Configuration

See all configuration options and documentation here: config_cpp.md

📚 References & Useful Links

📄 Licenses

OpenCV

License: Apache License 2.0

ImGui

License: MIT License

❤️ Support the Project & Get Better AI Models

This project is actively developed thanks to the people who support it on Boosty and Patreon.
By supporting the project, you get access to improved and better-trained AI models!

Need help or want to contribute? Join our Discord server or open an issue on GitHub!

License

TheCrAge100/aimbot_cpp

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages