Ziglings

Welcome to Ziglings! This project contains a series of tiny broken programs (and one nasty surprise). By fixing them, you'll learn how to read and write Zig code.

Those broken programs need your help! (You'll also save the planet from evil aliens and help some friendly elephants stick together, which is very sweet of you.)

This project was initiated by Dave Gauer and is directly inspired by the brilliant and fun rustlings project. Indirect inspiration comes from Ruby Koans and the Little LISPer/Little Schemer series of books.

Intended Audience

This will probably be difficult if you've never programmed before. But no specific programming experience is required. And in particular, you are not expected to have any prior experience with "systems programming" or a "systems" level language such as C.

Each exercise is self-contained and self-explained. However, you're encouraged to also check out these Zig language resources for more detail:

Also, the Zig community is incredibly friendly and helpful!

Getting Started

Install a development build of the Zig compiler. (See the "master" section of the downloads page.)

Verify the installation and build number of zig like so:

$ zig version
0.14.0-dev.xxxx+xxxxxxxxx

Clone this repository with Git:

$ git clone https://ziglings.org
$ cd ziglings.org

Then run zig build and follow the instructions to begin!

$ zig build

Note: The output of Ziglings is the unaltered output from the Zig compiler. Part of the purpose of Ziglings is to acclimate you to reading these.

A Note About Versions

Hint: To check out Ziglings for a stable release of Zig, you can use the appropriate tag.

The Zig language is under very active development. In order to be current, Ziglings tracks development builds of the Zig compiler rather than versioned release builds. The last stable release was 0.13.0, but Ziglings needs a dev build with pre-release version "0.14.0" and a build number at least as high as that shown in the example version check above.

It is likely that you'll download a build which is greater than the minimum.

Once you have a build of the Zig compiler that works with Ziglings, they'll continue to work together. But keep in mind that if you update one, you may need to also update the other.

Version Changes

Version-0.14.0-dev.1573

2024-09-16 zig 0.14.0-dev.1573 - introduction of labeled switch, see #21257
2024-09-02 zig 0.14.0-dev.1409 - several changes in std.builtin, see #21225
2024-08-04 zig 0.14.0-dev.1224 - several changes in build system, see #21115
2024-08-04 zig 0.14.0-dev.839 - several changes in build system, see #20580, #20600
2024-06-17 zig 0.14.0-dev.42 - changes in std.mem.split and tokenize - see #15579
2024-05-29 zig 0.13.0-dev.339 - rework std.Progress - see #20059
2024-03-21 zig 0.12.0-dev.3518 - change to @fieldParentPtr - see #19470
2024-03-21 zig 0.12.0-dev.3397 - rename std.os to std.posix - see #5019
2024-03-14 zig 0.12.0-dev.3302 - changes in std.fmt - floating-point formatting implementation - see #19229
2024-02-05 zig 0.12.0-dev.2618 - changes in build system - from Step.zig_exe to Step.graph.zig_exe - see #18778
2024-01-05 zig 0.12.0-dev.2043 - rename of std.Build.FileSource to std.Build.LazyPath - see #16353
2023-10-24 zig 0.12.0-dev.1243 - changes in std.ChildProcess: renamed exec to run - see #5853
2023-06-26 zig 0.11.0-dev.4246 - changes in compile step (now it can be null)
2023-06-26 zig 0.11.0-dev.3853 - removal of destination type from all cast builtins
2023-06-20 zig 0.11.0-dev.3747 - @enumToInt is now @intFromEnum and @intToFloat is now @floatFromInt
2023-05-25 zig 0.11.0-dev.3295 - std.debug.TTY is now std.io.tty
2023-04-30 zig 0.11.0-dev.2704 - use of the new std.Build.ExecutableOptions.link_libc field
2023-04-12 zig 0.11.0-dev.2560 - changes in std.Build - remove run() and install()
2023-04-07 zig 0.11.0-dev.2401 - fixes of the new build system - see #212
2023-02-21 zig 0.11.0-dev.2157 - changes in build system - new: parallel processing of the build steps
2023-02-21 zig 0.11.0-dev.1711 - changes in for loops - new: Multi-Object For-Loops + Struct-of-Arrays
2023-02-12 zig 0.11.0-dev.1638 - changes in std.Build cache_root now returns a directory struct
2023-02-04 zig 0.11.0-dev.1568 - changes in std.Build (combine std.build and std.build.Builder into std.Build)
2023-01-14 zig 0.11.0-dev.1302 - changes in @addWithOverflow (now returns a tuple) and @typeInfo; temporary disabled async functionality
2022-09-09 zig 0.10.0-dev.3978 - change in NativeTargetInfo.detect in build
2022-09-06 zig 0.10.0-dev.3880 - Ex 074 correctly fails again: comptime array len
2022-08-29 zig 0.10.0-dev.3685 - @typeName() output change, stage1 req. for async
2022-07-31 zig 0.10.0-dev.3385 - std lib string fmt() option changes
2022-03-19 zig 0.10.0-dev.1427 - method for getting sentinel of type changed
2021-12-20 zig 0.9.0-dev.2025 - c_void is now anyopaque
2021-06-14 zig 0.9.0-dev.137 - std.build.Id .Custom is now .custom
2021-04-21 zig 0.8.0-dev.1983 - std.fmt.format() any format string required
2021-02-12 zig 0.8.0-dev.1065 - std.fmt.format() s (string) format string required

Advanced Usage

It can be handy to check just a single exercise:

zig build -Dn=19

Or run all exercises, starting from a specific one:

zig build -Ds=27

Or let Ziglings pick an exercise for you:

zig build -Drandom

You can also run without checking for correctness:

zig build -Dn=19 test

Or skip the build system entirely and interact directly with the compiler if you're into that sort of thing:

zig run exercises/001_hello.zig

Calling all wizards: To prepare an executable for debugging, install it to zig-cache/bin with:

zig build -Dn=19 install

To get a list of all possible options, run:

zig build -Dn=19 -l

  install          Install 019_functions2.zig to prefix path
  uninstall        Uninstall 019_functions2.zig from prefix path
  test             Run 019_functions2.zig without checking output
  ...

What's Covered

The primary goal for Ziglings is to cover the core Zig language.

It would be nice to cover the Standard Library as well, but this is currently challenging because the stdlib is evolving even faster than the core language (and that's saying something!). Not only would stdlib coverage change very rapidly, some exercises might even cease to be relevant entirely.

Having said that, there are some stdlib features that are probably here to stay or are so important to understand that they are worth the extra effort to keep current.

Conspicuously absent from Ziglings are a lot of string manipulation exercises. This is because Zig itself largely avoids dealing with strings. Hopefully there will be an obvious way to address this in the future. The Ziglings crew loves strings!

Zig Core Language

Zig Standard Library

String formatting
Testing
Tokenization
File handling

Contributing

Contributions are very welcome! I'm writing this to teach myself and to create the learning resource I wished for. There will be tons of room for improvement:

Wording of explanations
Idiomatic usage of Zig
Additional exercises

Please see CONTRIBUTING in this repo for the full details.

License

liby/exercises

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages