My Smart Home workshop

What are we going to build?
Basic Freestyle-RPC Structure
- How to run it
- Project structure
  - Protocol
  - Server
  - Client
Evolving the Avro schema
- Protocol
Unary RPC service: IsEmpty
- Protocol
- Server
- Client
- Result
Server-streaming RPC service: GetTemperature
- Protocol
- Server
- Client
- Result
Bidirectional streaming RPC service: comingBackMode
- Protocol
- Server
- Client
- Result

What are we going to build?

During the course of this workshop, we are going to build a couple of purely functional microservices, which are going to interact with each other in different ways but always via the RPC protocol. One as a server will play the role of a smart home and the other will be a client, a mobile app for instance, and the interactions will be:

IsEmpty: Will be a unary RPC, that means that the smart home will return a single response to each request from the mobile, to let it know if there is anybody inside the home or there isn't.
getTemperature: Will be a unidirectional streaming service from the server, where the smart home will return a stream of temperature values in real-time after a single request from the mobile.
comingBackMode: Will be a bidirectional streaming service, where the mobile app sends a stream of location coordinates and the smart home emits in streaming a list of operations that are being triggered. For instance:
- If the client is about 30 minutes to come back, the home can start heating the living room and increase the power of the hot water heater.
- If the client is only a 2-minute walk away, the home can turn some lights on and turn the irrigation system off.
- If the client is in front of the main door, this can be unlocked and the alarms disabled.

Basic Freestyle-RPC Structure

We are going to use the rpc-server-client-pb giter8 template to create the basic project structure, which provides a good basis to build upon. In this case, the template creates a multimodule project, with:

The RPC protocol, which is very simple. It exposes a service to lookup a person given a name.
The server, which with implements an interpreter of the service defined by the protocol and it runs an RPC server.
The client, which consumes the RPC endpoint against the server, and it uses the protocol to know the schema.

To start:

sbt new frees-io/rpc-server-client-pb.g8
...
name [Project Name]: SmartHome
projectDescription [Project Description]: My SmartHome app
project [project-name]: smarthome
package [org.mycompany]: com.fortyseven
freesRPCVersion [0.14.1]:

Template applied in ./smarthome

How to run it

Run the server:

sbt runServer

And the log will show:

INFO  - ServiceName(seedServer) - Starting app.server at Host(localhost):Port(19683)

then, run the client:

sbt runClient

The client should log:

INFO  - Created new RPC client for (localhost,19683)
INFO  - Request: foo
INFO  - Result: PeopleResponse(Person(foo,24))
INFO  - Request: bar
INFO  - Result: PeopleResponse(Person(bar,9))
INFO  - Request: baz
INFO  - Result: PeopleResponse(Person(baz,17))
INFO  - Removed 1 RPC clients from cache.

And the server:

INFO  - PeopleService - Request: PeopleRequest(foo)
INFO  - PeopleService - Sending response: Person(foo,24)
INFO  - PeopleService - Request: PeopleRequest(bar)
INFO  - PeopleService - Sending response: Person(bar,9)
INFO  - PeopleService - Request: PeopleRequest(baz)
INFO  - PeopleService - Sending response: Person(baz,17)

Project structure

.
├── LICENSE
├── NOTICE.md
├── README.md
├── build.sbt
├── version.sbt
├── commons
├── project
├── client
│   └── src
│       └── main
│           ├── resources
│           │   └── logback.xml
│           └── scala
│               ├── ClientApp.scala
│               ├── ClientRPC.scala
│               └── PeopleServiceApi.scala
├── protocol
│   └── src
│       └── main
│           └── resources
│               ├── People.avdl
│               └── PeopleService.avdl
└── server
    └── src
        └── main
            └── scala
                ├── PeopleRepository.scala
                ├── PeopleServiceHandler.scala
                └── ServerApp.scala

Protocol

The protocol module includes the definition of the service and the messages that will be used both by the server and the client:

├── protocol
│   └── src
│       └── main
│           └── resources
│               ├── People.avdl
│               └── PeopleService.avdl

People.avdl

In this initial example, which the app only exposes a service to retrieve persons by a given name, we need to define the models that are going to "flow through the wire", and in this case we are using Avro Schema Definition:

protocol People {

  record Person {
    string name;
    int age;
  }

  record PeopleRequest {
    string name;
  }

  record PeopleResponse {
    Person person;
  }

}

PeopleService.avdl

And finally, we have to define the protocol. In this case is just an operation called getPerson that accepts a PeopleRequest and returns a PeopleResponse:

protocol PeopleService {
  import idl "People.avdl";
  PeopleResponse getPerson(PeopleRequest request);
}

Server

The server tackles mainly a couple of purposes: To run the RPC server and provide an interpreter to the service defined in the protocol.

└── server
    └── src
        └── main
            └── scala
                ├── PeopleRepository.scala
                ├── PeopleServiceHandler.scala
                └── ServerApp.scala

PoepleServiceHandler.scala

This is the interpretation of the protocol PeopleService. In this case, the getPerson operation returns the person retrieved by the PeopleRepository, which represents a database interaction.

class PeopleServiceHandler[F[_]: Sync: Logger: PeopleRepository] extends PeopleService[F] {
  val serviceName = "PeopleService"

  override def getPerson(request: PeopleRequest): F[PeopleResponse] =
    for {
      _      <- Logger[F].info(s"$serviceName - Request: $request")
      person <- PeopleRepository[F].getPerson(request.name)
      _      <- Logger[F].info(s"$serviceName - Sending response: $person")
    } yield PeopleResponse(person)
}

ServerApp.scala

The implementation of the serverStream leverages the features of GrpcServer to deal with servers.

implicit val PS: PeopleService[F] = new PeopleServiceHandler[F]

val grpcConfigs: List[GrpcConfig] = List(AddService(PeopleService.bindService[F]))

Stream.eval(
  for {
    server <- GrpcServer.default[F](config.port.value, grpcConfigs)
    _ <- Logger[F].info(s"${config.name} - Starting app.server at ${config.host}:${config.port}")
    exitCode <- GrpcServer.server(server).as(StreamApp.ExitCode.Success)
  } yield exitCode
)

Client

In this initial version of the client, it just runs a client for the PeopleService and it injects it in the streaming flow of the app.

├── client
│   └── src
│       └── main
│           ├── resources
│           │   └── logback.xml
│           └── scala
│               ├── ClientApp.scala
│               ├── ClientRPC.scala
│               └── PeopleServiceApi.scala

PeopleServiceApi.scala

This algebra is the via to connect to the server through the RPC client, using some Freestyle-RPC magic.

trait PeopleServiceApi[F[_]] {
  def getPersonByName(name: String): F[Person]
}

object PeopleServiceApi {

  def apply[F[_]: Effect](clientRPCF: F[PeopleService.Client[F]])(implicit L: Logger[F]):PeopleServiceApi[F] =
    new PeopleServiceApi[F] {
      override def getPersonByName(name: String): F[Person] =
        for {
          clientRPC <- clientRPCF
          _         <- L.info(s"Request: $name")
          result    <- clientRPC.getPerson(PeopleRequest(name))
          _         <- L.info(s"Result: $result")
        } yield result.person
    }

  def createInstance[F[_]: Effect](
      hostname: String,
      port: Int,
      sslEnabled: Boolean = false,
      tryToRemoveUnusedEvery: FiniteDuration = 30.minutes,
      removeUnusedAfter: FiniteDuration = 1.hour)(
      implicit L: Logger[F],
      TM: Timer[F],
      S: Scheduler): fs2.Stream[F, PeopleServiceApi[F]] = ???
}

ClientRPC.scala

This object provides an RPC client for a given tuple of host and port. It's used in PeopleServiceApi.

ClientApp.scala

Similar to ServerApp, this app instantiates the logger, the RPC client and it calls to getPersonByName as soon as it starts running.

for {
  peopleApi <- PeopleServiceApi.createInstance(config.host.value, config.port.value)
  exitCode <- Stream
    .eval(List("foo", "bar", "baz").traverse[F, Person](peopleApi.getPersonByName))
    .as(StreamApp.ExitCode.Success)
} yield exitCode

Evolving the Avro schema

As we have seen before, both client and server are using the same common protocol defined via Avro schema, which is an ideal scenario but realistically speaking the server side might need to add certainly changes in the model. Then how the server can preserve the compatibility with clients that are still using the old model?

Thanks to the Avro definitions we can add evolutions to the models in a safety way, keeping all the clients fully compatible but obviously, there are some limited operations that can't be done, like removing a field in a response model or adding a new required field to a request object.

To illustrate that non-updated clients are able to keep interacting with evolved servers, we'll just add a new field phone to Person.

Protocol

Let's add a new evolution to the models described in the protocol

People.avdl

protocol People {

  record Person {
    string name;
    int age;
    string phone;
  }

  record PeopleRequest {
    string name;
  }

  record PeopleResponse {
    Person person;
  }

}

We can now run the server app using this new version, and the client app with the previous one, and the requests should have been processed properly on both sides.

As we can see, the client digests Persons instances included in the responses as expected:

INFO  - Created new RPC client for (localhost,19683)
INFO  - Request: foo
INFO  - Result: PeopleResponse(Person(foo,24))
INFO  - Request: bar
INFO  - Result: PeopleResponse(Person(bar,9))
INFO  - Request: baz
INFO  - Result: PeopleResponse(Person(baz,17))
INFO  - Removed 1 RPC clients from cache.

Even when actually the server is including the telephone numbers at them:

INFO  - PeopleService - Request: PeopleRequest(foo)
INFO  - PeopleService - Sending response: Person(foo,24,(206) 198-8396)
INFO  - PeopleService - Request: PeopleRequest(bar)
INFO  - PeopleService - Sending response: Person(bar,9,(206) 740-2096)
INFO  - PeopleService - Request: PeopleRequest(baz)
INFO  - PeopleService - Sending response: Person(baz,17,(206) 812-1984)

Unary RPC service: `IsEmpty`

Having said this, now it's the right moment to get started to develop the features of the SmartHome, and discard the People stuff. As we said above, we want also to build a unary RPC service to let clients know if there is somebody in the home or there is not.

Protocol

In order to show another way to define protocols, we are going to express our models and services using directly Scala code, and using ProtocolBuffer as serialiser instead of Avro.

So the protocol module can adopt know this shape (of course we should also discard the idlgens references at ProjectPlugin.scala and plugins.sbt):

├── protocol
│   └── src
│       └── main
│           └── scala
│               └── protocol
│                   ├── Messages.scala
│                   └── SmartHomeService.scala

Messages.scala

Where we defined the messages flowing through the wire:

@message
final case class IsEmptyRequest()

@message
final case class IsEmptyResponse(result: Boolean)

SmartHomeService.scala

Where we defined interface of the RPC service:

@service(Protobuf) trait SmartHomeService[F[_]] {

  def isEmpty(request: IsEmptyRequest): F[IsEmptyResponse]

}

Server

Now, we have to implement an interpreter for the new service SmartHomeService:

class SmartHomeServiceHandler[F[_]: Sync: Logger] extends SmartHomeService[F] {
  val serviceName = "SmartHomeService"

  override def isEmpty(request: IsEmptyRequest): F[IsEmptyResponse] =
    Logger[F].info(s"$serviceName - Request: $request").as(IsEmptyResponse(true))

}

And bind it to the gRPC server:

val grpcConfigs: List[GrpcConfig] = List(AddService(SmartHomeService.bindService[F]))

Client

And the client, of course, needs an algebra to describe the same operation:

trait SmartHomeServiceApi[F[_]] {
  def isEmpty(): F[Boolean]
}

That will be called when the app is running

for {
  serviceApi <- SmartHomeServiceApi.createInstance(config.host.value, config.port.value)
  _          <- Stream.eval(serviceApi.isEmpty)
} yield StreamApp.ExitCode.Success

Result

When we run the client now with sbt runClient we get:

INFO  - Created new RPC client for (localhost,19683)
INFO  - Result: IsEmptyResponse(true)
INFO  - Removed 1 RPC clients from cache.

And the server log the request as expected:

INFO  - SmartHomeService - Request: IsEmptyRequest()

Server-streaming RPC service: `GetTemperature`

Following the established plan, the next step is building the service that returns a stream of temperature values, to let clients subscribe to collect real-time info.

Protocol

As usual we should add this operation in the protocol.

Messages.scala

Adding new models:

case class TemperatureUnit(value: String) extends AnyVal
case class Temperature(value: Double, unit: TemperatureUnit)

SmartHomeService.scala

And the getTemperature operation:

@service(Protobuf) trait SmartHomeService[F[_]] {

  def isEmpty(request: IsEmptyRequest): F[IsEmptyResponse]

  def getTemperature(empty: Empty.type): Stream[F, Temperature]
}

Server

If we want to emit a stream of Temperature values, we would be well advised to develop a producer of Temperature in the server side. For instance:

trait TemperatureReader[F[_]] {
  def sendSamples: Stream[F, Temperature]
}

object TemperatureReader {
  implicit def instance[F[_]: Sync: Logger: Timer]: TemperatureReader[F] =
    new TemperatureReader[F] {
      val seed = Temperature(77d, TemperatureUnit("Fahrenheit"))

      def readTemperature(current: Temperature): F[Temperature] =
        Timer[F]
          .sleep(1.second)
          .flatMap(_ =>
            Sync[F].delay {
              val increment: Double = Random.nextDouble() / 2d
              val signal            = if (Random.nextBoolean()) 1 else -1
              val currentValue      = current.value

              current.copy(
                value = BigDecimal(currentValue + (signal * increment))
                  .setScale(2, RoundingMode.HALF_UP)
                  .doubleValue)
          })

      override def sendSamples: Stream[F, Temperature] =
        Stream.iterateEval(seed) { t =>
          Logger[F].info(s"* New Temperature 👍  --> $t").flatMap(_ => readTemperature(t))
        }
    }

  def apply[F[_]](implicit ev: TemperatureReader[F]): TemperatureReader[F] = ev
}

And this can be returned as response of the new service, in the interpreter.

override def getTemperature(empty: Empty.type): Stream[F, Temperature] = for {
  _            <- Stream.eval(Logger[F].info(s"$serviceName - getTemperature Request"))
  temperatures <- TemperatureReader[F].sendSamples.take(20)
} yield temperatures

Client

We have nothing less than adapt the client to consume the new service when it starting up. To this, a couple of changes are needed:

Firstly we should enrich the algebra

trait SmartHomeServiceApi[F[_]] {

  def isEmpty(): F[Boolean]

  def getTemperature(): Stream[F, Temperature]

}

Whose interpretation could be:

def getTemperature: Stream[F, TemperaturesSummary] = {
  for {
    client      <- Stream.eval(clientF)
    temperature <- client.getTemperature(Empty)
    _           <- Stream.eval(L.info(s"* Received new temperature: 👍 --> $temperature"))
  } yield temperature
}.fold(TemperaturesSummary.empty)((summary, temperature) => summary.append(temperature))

Basically, we are logging the incoming values and at the end we calculate the average of those values.

Now, the client app calls to both services: isEmpty and getTemperature. And finally, to call it:

for {
  serviceApi  <- SmartHomeServiceApi.createInstance(config.host.value, config.port.value)
  _           <- Stream.eval(serviceApi.isEmpty)
  summary     <- serviceApi.getTemperature
  _           <- Stream.eval(Logger[F].info(s"The average temperature is: ${summary.averageTemperature}"))
} yield StreamApp.ExitCode.Success

Result

When we run the client now with sbt runClient we get:

INFO  - Created new RPC client for (localhost,19683)
INFO  - Result: IsEmptyResponse(true)
INFO  - * Received new temperature: 👍  --> Temperature(77.0,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(77.25,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(77.58,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(78.02,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(77.67,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(77.5,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(77.58,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(77.15,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(76.66,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(76.45,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(76.77,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(76.74,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(76.41,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(76.59,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(76.77,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(76.49,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(76.04,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(76.42,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(75.95,TemperatureUnit(Fahrenheit))
INFO  - * Received new temperature: 👍  --> Temperature(75.97,TemperatureUnit(Fahrenheit))
INFO  - The average temperature is: Temperature(76.85,TemperatureUnit(Fahrenheit))
INFO  - Removed 1 RPC clients from cache.

And the server log the request as expected:

INFO  - ServiceName(seedServer) - Starting app.server at Host(localhost):Port(19683)
INFO  - SmartHomeService - Request: IsEmptyRequest()
INFO  - SmartHomeService - getTemperature Request
INFO  - * New Temperature 👍  --> Temperature(77.0,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(77.25,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(77.58,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(78.02,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(77.67,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(77.5,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(77.58,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(77.15,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(76.66,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(76.45,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(76.77,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(76.74,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(76.41,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(76.59,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(76.77,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(76.49,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(76.04,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(76.42,TemperatureUnit(Fahrenheit))
INFO  - * New Temperature 👍  --> Temperature(75.95,TemperatureUnit(Fahrenheit))

Bidirectional streaming RPC service: `comingBackMode`

To illustrate the bidirectional streaming, we are going to build a new service that makes the server react to real-time info provided by the client. In this case, as we said above, the client (the mobile app) will emit a stream of coordinates (latitude and longitude), and the server (the smart home) will trigger some actions according to the distance.

Protocol

So let's add this service to the protocol.

Messages.scala

Adding new models:

case class Point(lat: Double, long: Double)
case class Location(currentLocation: Point, destination: Point, distanceToDestination: Double)
case class SmartHomeAction(description: String, isDone: Boolean)
@message
final case class ComingBackModeResponse(actions: List[SmartHomeAction])

SmartHomeService.scala

And the comingBackMode operation:

@service(Protobuf) trait SmartHomeService[F[_]] {

  def isEmpty(request: IsEmptyRequest): F[IsEmptyResponse]

  def getTemperature(empty: Empty.type): Stream[F, Temperature]

  def comingBackMode(request: Stream[F, Location]): Stream[F, ComingBackModeResponse]
}

Server

So there is a new function to be implemented in the interpreter:

override def comingBackMode(request: Stream[F, Location]): Stream[F, ComingBackModeResponse] =
  for {
    _        <- Stream.eval(Logger[F].info(s"$serviceName - Enabling Coming Back Home mode"))
    location <- request
    _ <- Stream.eval(
      if (location.distanceToDestination > 0.0d) Logger[F].info(s"$serviceName - Distance to destination: ${location.distanceToDestination} mi")
      else Logger[F].info(s"$serviceName - You have reached your destination 🏡"))
    response <- Stream.eval(SmartHomeSupervisor[F].performAction(location))
  } yield response

Client

Again, if the client will emit a stream of locations, we should develop a producer, which as been created at LocationGenerators. No big deal, so far. But we have to add this operation in the SmartHomeServiceApi:

trait SmartHomeServiceApi[F[_]] {
  def isEmpty(): F[Boolean]
  def getTemperature(): Stream[F, Temperature]
  def comingBackMode(locations: Stream[F, Location]): F[Boolean]
}

Whose interpretation could be:

def comingBackMode(locations: Stream[F, Location]): Stream[F, ComingBackModeResponse] = for {
  client   <- Stream.eval(clientF)
  response <- client.comingBackMode(locations)
} yield response

Now, we have all the ingredients to proceed in the ClientApp:

for {
  serviceApi <- SmartHomeServiceApi.createInstance(config.host.value, config.port.value)
  _          <- Stream.eval(serviceApi.isEmpty)
  summary    <- serviceApi.getTemperature
  _          <- Stream.eval(Logger[F].info(s"The average temperature is: ${summary.averageTemperature}"))
  response   <- serviceApi.comingBackMode(LocationsGenerator.get[F])
} yield response.actions

Result

When we run the client now with sbt runClient we get:

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👮 - Enable security cameras

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 💦 - Disable irrigation system

INFO  - 🔌 - Send Rumba to the charging dock

INFO  - 🛋 - Start heating the living room

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 🔥 - Fireplace in ambient mode

INFO  - 🗞 - Get news summary

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 💧 - Increase the power of the hot water heater

INFO  - 🛁 - Turn the towel heaters on

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 😎 - Low the blinds

INFO  - 💡 - Turn on the lights

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👩 - Connect Alexa

INFO  - 📺 - Turn on the TV

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 🔦 - Turn exterior lights on

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 👀 - Waiting for a new location...

INFO  - 🚪 - Unlock doors

INFO  - Removed 1 RPC clients from cache.

And the server log the request as expected:

INFO  - SmartHomeService - Enabling Coming Back Home mode
INFO  - SmartHomeService - Distance to destination: 6.39 mi
INFO  - SmartHomeService - Distance to destination: 6.26 mi
INFO  - SmartHomeService - Distance to destination: 6.13 mi
INFO  - SmartHomeService - Distance to destination: 6.0 mi
INFO  - SmartHomeService - Distance to destination: 5.87 mi
INFO  - SmartHomeService - Distance to destination: 5.74 mi
INFO  - SmartHomeService - Distance to destination: 5.61 mi
INFO  - SmartHomeService - Distance to destination: 5.48 mi
INFO  - SmartHomeService - Distance to destination: 5.35 mi
INFO  - SmartHomeService - Distance to destination: 5.22 mi
INFO  - SmartHomeService - Distance to destination: 5.09 mi
INFO  - SmartHomeService - Distance to destination: 4.96 mi
INFO  - SmartHomeService - Distance to destination: 4.83 mi
INFO  - SmartHomeService - Distance to destination: 4.7 mi
INFO  - SmartHomeService - Distance to destination: 4.57 mi
INFO  - SmartHomeService - Distance to destination: 4.44 mi
INFO  - SmartHomeService - Distance to destination: 4.31 mi
INFO  - SmartHomeService - Distance to destination: 4.18 mi
INFO  - SmartHomeService - Distance to destination: 4.05 mi
INFO  - SmartHomeService - Distance to destination: 3.91 mi
INFO  - SmartHomeService - Distance to destination: 3.78 mi
INFO  - SmartHomeService - Distance to destination: 3.65 mi
INFO  - SmartHomeService - Distance to destination: 3.52 mi
INFO  - SmartHomeService - Distance to destination: 3.39 mi
INFO  - SmartHomeService - Distance to destination: 3.26 mi
INFO  - SmartHomeService - Distance to destination: 3.13 mi
INFO  - SmartHomeService - Distance to destination: 3.0 mi
INFO  - SmartHomeService - Distance to destination: 2.87 mi
INFO  - SmartHomeService - Distance to destination: 2.74 mi
INFO  - SmartHomeService - Distance to destination: 2.61 mi
INFO  - SmartHomeService - Distance to destination: 2.48 mi
INFO  - SmartHomeService - Distance to destination: 2.35 mi
INFO  - SmartHomeService - Distance to destination: 2.22 mi
INFO  - SmartHomeService - Distance to destination: 2.09 mi
INFO  - SmartHomeService - Distance to destination: 1.96 mi
INFO  - SmartHomeService - Distance to destination: 1.83 mi
INFO  - SmartHomeService - Distance to destination: 1.7 mi
INFO  - SmartHomeService - Distance to destination: 1.57 mi
INFO  - SmartHomeService - Distance to destination: 1.44 mi
INFO  - SmartHomeService - Distance to destination: 1.3 mi
INFO  - SmartHomeService - Distance to destination: 1.17 mi
INFO  - SmartHomeService - Distance to destination: 1.04 mi
INFO  - SmartHomeService - Distance to destination: 0.91 mi
INFO  - SmartHomeService - Distance to destination: 0.78 mi
INFO  - SmartHomeService - Distance to destination: 0.65 mi
INFO  - SmartHomeService - Distance to destination: 0.52 mi
INFO  - SmartHomeService - Distance to destination: 0.39 mi
INFO  - SmartHomeService - Distance to destination: 0.26 mi
INFO  - SmartHomeService - Distance to destination: 0.13 mi
INFO  - SmartHomeService - You have reached your destination 🏡

Copyright

Freestyle-RPC is designed and developed by 47 Degrees

Copyright (C) 2017 47 Degrees. http://47deg.com

License

frees-io/frees-rpc-lambda-world-workshop

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Contributors 2

Uh oh!

Languages

Error
Looks like something went wrong!

Packages