tmux.nvim

features

copy from nvim to nvim to tmux

tmux-copy.mp4

navigating from nvim into tmux panes

tmux-navigate.mp4

resizing nvim splits like tmux panes

tmux-resize.mp4

requirements

neovim >= 0.5

The plugin and .tmux.conf scripts are battle tested with

tmux 3.2a

installation

Install tmux.nvim with e.g. packer.nvim. The config step is only necessary to overwrite configuration defaults.

use({
    "aserowy/tmux.nvim",
    config = function()
        require("tmux").setup({
            -- overwrite default configuration
            -- here, e.g. to enable default bindings
            copy_sync = {
                -- enables copy sync and overwrites all register actions to
                -- sync registers *, +, unnamed, and 0 till 9 from tmux in advance
                enable = true,
            },
            navigation = {
                -- enables default keybindings (C-hjkl) for normal mode
                enable_default_keybindings = true,
            },
            resize = {
                -- enables default keybindings (A-hjkl) for normal mode
                enable_default_keybindings = true,
            }
        })
    end
})

configuration

The following defaults are given:

{
    copy_sync = {
        -- enables copy sync and overwrites all register actions to
        -- sync registers *, +, unnamed, and 0 till 9 from tmux in advance
        enable = false,

        -- ignore specific tmux buffers e.g. buffer0 = true to ignore the
        -- first buffer or named_buffer_name = true to ignore a named tmux
        -- buffer with name named_buffer_name :)
        ignore_buffers = { empty = false },

        -- TMUX >= 3.2: yanks (and deletes) will get redirected to system
        -- clipboard by tmux
        redirect_to_clipboard = false,

        -- offset controls where register sync starts
        -- e.g. offset 2 lets registers 0 and 1 untouched
        register_offset = 0,

        -- sync clipboard overwrites vim.g.clipboard to handle * and +
        -- registers. If you sync your system clipboard without tmux, disable
        -- this option!
        sync_clipboard = true,

        -- syncs deletes with tmux clipboard as well, it is adviced to
        -- do so. Nvim does not allow syncing registers 0 and 1 without
        -- overwriting the unnamed register. Thus, ddp would not be possible.
        sync_deletes = true,

        -- syncs the unnamed register with the first buffer entry from tmux.
        sync_unnamed = true,
    },
    navigation = {
        -- cycles to opposite pane while navigating into the border
        cycle_navigation = true,

        -- enables default keybindings (C-hjkl) for normal mode
        enable_default_keybindings = false,

        -- prevents unzoom tmux when navigating beyond vim border
        persist_zoom = false,
    },
    resize = {
        -- enables default keybindings (A-hjkl) for normal mode
        enable_default_keybindings = false,

        -- sets resize steps for x axis
        resize_step_x = 1,

        -- sets resize steps for y axis
        resize_step_y = 1,
    }
}

usage

Tmux.nvim uses only lua API. If you are not running the default keybindings, you can bind the following functions to your liking. Besides the bindings in nvim you need to add configuration to tmux.

copy sync

Copy sync uses tmux buffers as master clipboard for *, +, unnamed, and 0 - 9 registers. The sync does NOT rely on temporary files and works just with the given tmux API. Thus, making it less insecure :). The feature enables a nvim instace overarching copy/paste process! dd in one nvim instance, switch to the second and p your deletes.

If you sync your clipboard not with a standalone tmux, disable sync_clipboard to ensure nvim handles yanks and deletes alone.

This has some downsites, on really slow machines, calling registers or pasting will eventually produce minimal input lag by syncing registers in advance to ensure the correctness of state.

To redirect copies (and deletes) to clipboard, tmux must have the capability to do so. The plugin will just set -w on set-buffer. If your tmux need more configuration check out tmux-yank for an easy setup.

Ignoring buffers must have the form of buffer_name = true to enable an unsorted list in lua. This enhances the performance of checks - if a buffer is ignored or not - meaningfull.

navigation

To enable cycle-free navigation beyond nvim, add the following to your ~/.tmux.conf:

It is important to note, that your bindings in nvim must match the defined bindings in tmux! Otherwise the pass through will not have the seamless effect!

is_vim="ps -o state= -o comm= -t '#{pane_tty}' | grep -iqE '^[^TXZ ]+ +(\\S+\\/)?g?(view|n?vim?x?)(diff)?$'"

bind-key -n 'C-h' if-shell "$is_vim" 'send-keys C-h' { if -F '#{pane_at_left}' '' 'select-pane -L' }
bind-key -n 'C-j' if-shell "$is_vim" 'send-keys C-j' { if -F '#{pane_at_bottom}' '' 'select-pane -D' }
bind-key -n 'C-k' if-shell "$is_vim" 'send-keys C-k' { if -F '#{pane_at_top}' '' 'select-pane -U' }
bind-key -n 'C-l' if-shell "$is_vim" 'send-keys C-l' { if -F '#{pane_at_right}' '' 'select-pane -R' }

bind-key -T copy-mode-vi 'C-h' if -F '#{pane_at_left}' '' 'select-pane -L'
bind-key -T copy-mode-vi 'C-j' if -F '#{pane_at_bottom}' '' 'select-pane -D'
bind-key -T copy-mode-vi 'C-k' if -F '#{pane_at_top}' '' 'select-pane -U'
bind-key -T copy-mode-vi 'C-l' if -F '#{pane_at_right}' '' 'select-pane -R'

Otherwise you can add:

is_vim="ps -o state= -o comm= -t '#{pane_tty}' | grep -iqE '^[^TXZ ]+ +(\\S+\\/)?g?(view|n?vim?x?)(diff)?$'"

bind-key -n 'C-h' if-shell "$is_vim" 'send-keys C-h' 'select-pane -L'
bind-key -n 'C-j' if-shell "$is_vim" 'send-keys C-j' 'select-pane -D'
bind-key -n 'C-k' if-shell "$is_vim" 'send-keys C-k' 'select-pane -U'
bind-key -n 'C-l' if-shell "$is_vim" 'send-keys C-l' 'select-pane -R'

bind-key -T copy-mode-vi 'C-h' select-pane -L
bind-key -T copy-mode-vi 'C-j' select-pane -D
bind-key -T copy-mode-vi 'C-k' select-pane -U
bind-key -T copy-mode-vi 'C-l' select-pane -R

If you are using tmux plugin manager, you can add the following plugin. On a side note: This plugin sets the default keybindings and does not support cycle-free navigation:

set -g @plugin 'christoomey/vim-tmux-navigator'

run '~/.tmux/plugins/tpm/tpm'

To run custom bindings in nvim, make sure to set enable_default_keybindings to false. The following functions are used to navigate around windows and panes:

{
    [[<cmd>lua require("tmux").move_left()<cr>]],
    [[<cmd>lua require("tmux").move_bottom()<cr>]],
    [[<cmd>lua require("tmux").move_top()<cr>]],
    [[<cmd>lua require("tmux").move_right()<cr>]],
}

resize

Add the following bindings to your ~/.tmux.conf:

It is important to note, that your bindings in nvim must match the defined bindings in tmux! Otherwise the pass through will not have the seamless effect!

is_vim="ps -o state= -o comm= -t '#{pane_tty}' | grep -iqE '^[^TXZ ]+ +(\\S+\\/)?g?(view|n?vim?x?)(diff)?$'"

bind -n 'M-h' if-shell "$is_vim" 'send-keys M-h' 'resize-pane -L 1'
bind -n 'M-j' if-shell "$is_vim" 'send-keys M-j' 'resize-pane -D 1'
bind -n 'M-k' if-shell "$is_vim" 'send-keys M-k' 'resize-pane -U 1'
bind -n 'M-l' if-shell "$is_vim" 'send-keys M-l' 'resize-pane -R 1'

bind-key -T copy-mode-vi M-h resize-pane -L 1
bind-key -T copy-mode-vi M-j resize-pane -D 1
bind-key -T copy-mode-vi M-k resize-pane -U 1
bind-key -T copy-mode-vi M-l resize-pane -R 1

To run custom bindings in nvim, make sure to not set enable_default_keybindings to true. The following functions are used to resize windows:

{
    [[<cmd>lua require("tmux").resize_left()<cr>]],
    [[<cmd>lua require("tmux").resize_bottom()<cr>]],
    [[<cmd>lua require("tmux").resize_top()<cr>]],
    [[<cmd>lua require("tmux").resize_right()<cr>]],
}

contribute

Contributed code must pass luacheck and be formatted with stylua. Besides formatting, all tests have to pass. Tests are written for busted.

If you are using nix-shell, you can start a nix-shell and run fac (format and check).

stylua lua/ && luacheck lua/ && busted --verbose

inspiration

clipboard harmonization

navigation & resizing

License

lewis6991/tmux.nvim

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages