FP_Examples

This library provides several Function Packs that combine the usage of several X-NUCLEO boards together with a NUCLEO board.

Examples

There are several examples with the FP_Examples library.

NucleoCar: This application provides a funny example of usage of a NUCLEO board (it was tested with NUCLEO-F401RE) with X-NUCLEO-IDB05A1, X-NUCLEO-IHM02A1 and X-NUCLEO-6180XA1 Expansion Boards. The application implements two operative modes. With the first mode the car can move using the main VL6180X sensor; the closer we put the hand on the sensor, the higher is the speed of the car. The VL6180X satellites instead are used to avoid the obstacles. With the second mode the car can be controlled via BTLE using a dedicated Android App. Also in this case the VL6180X satellites try to avoid the obstacles. In order to change the car mode, you can push the User Button of the Nucleo board.
GestureDirSwipeLed_53L0A1_LED61A1: This application provides a simple example of usage of a NUCLEO board (it was tested with NUCLEO-L476RG) with X-NUCLEO-53L0A1 and X-NUCLEO-LED61A1 Expansion Boards. The application allows to switch on/off a strip of LEDs keeping the hand on the 3 proximity sensors at least for 3 seconds. When the LEDs are switched on, the user can increase or decrease the intensity of the LEDs performing a swipe movement respectively from left to right and from right to left.
MemsMotorControl_IKS01A2_IHM02A1: This application provides a simple example of usage of a NUCLEO board (it was tested with NUCLEO-F401RE) with X-NUCLEO-IKS01A2 and X-NUCLEO-IHM02A1 Expansion Boards. The application allows to run a motor clockwise or counter-clockwise rotating the stack of boards accordingly; the speed of motor increases when the angle of rotation increases as well.
BleSensors_SensiBLE: This application provides an example of usage of a SensiBLE board. The application uses BLE along with environmental and motion sensors (humidity, temperature, pressure, accelerometer, gyroscope). The user can connect an Android or IOS device with BlueNRG application to SensiBLE and see sensors data. The data are also printed to the serial port.
Flight1: This application provides an example of usage of a NUCLEO board (it was tested with NUCLEO-F401RE, NUCLEO-L476RG, NUCLEO-L152RE) with X-NUCLEO-IKS01A2 or X-NUCLEO-IKS01A3, X-NUCLEO-IDB05A1 and X-NUCLEO-53L1A1 Expansion Boards. The application gather data from the sensor mounted and then communicates them via bluetooth to a suitable Android app (such as ST BLE Sensor). The data gathered include enviromental data (temperature, pression, humidity), distance, gesture recognition (tap and directional swipe), acceleration (with accelerometer hardware events) and a gyroscope.
IKS01A3_S2LP_P2P_Demo: This application provides a simple example of usage of two NUCLEO boards (it was tested with NUCLEO-F401RE and NUCLEO-L053R8) with a X-NUCLEO-IKS01A3 and one among X-NUCLEO-S2868A1, X-NUCLEO-S2868A2 and X-NUCLEO-S2915A1. It shows how to send and receive all the sensor data provided by the X-NUCLEO-IKS01A3 between two NUCLEO boards connected each other through S2-LP based Expansion Boards; in order to send the sensor data you just need to push the button of the NUCLEO board; in order to see the received sensor data you just need to open a hyperterminal connected to the Virtual COM port of the Nucleo board; the LED of the NUCLEO board will blink after every successful transmission or reception.
X_NUCLEO_IKS02A1_Audio_Button: This application provides a simple example of recording audio from a X-NUCLEO-IKS02A1, converting from PDM to PCM, then saving it as a wave file to an SD Card.

Dependencies

The FP_Examples library requires the following STM32duino libraries (link to the source files):

STM32duino LSM6DSL: https://github.com/stm32duino/LSM6DSL
STM32duino LSM303AGR: https://github.com/stm32duino/LSM303AGR
STM32duino LPS22HB: https://github.com/stm32duino/LPS22HB
STM32duino Proximity Gesture: https://github.com/stm32duino/Proximity_Gesture
STM32duino VL6180X: https://github.com/stm32duino/VL6180X
STM32duino VL53L0X: https://github.com/stm32duino/VL53L0X
STM32duino VL53L1X: https://github.com/stm32duino/VL53L1X
STM32duino SPBTLE-RF: https://github.com/stm32duino/SPBTLE-RF
STM32duino X-NUCLEO-6180XA1: https://github.com/stm32duino/X-NUCLEO-6180XA1
STM32duino X-NUCLEO-53L0A1: https://github.com/stm32duino/X-NUCLEO-53L0A1
STM32duino X-NUCLEO-53L1A1: https://github.com/stm32duino/X-NUCLEO-53L1A1
STM32duino X-NUCLEO-IHM02A1: https://github.com/stm32duino/X-NUCLEO-IHM02A1
STM32duino X-NUCLEO-LED61A1: https://github.com/stm32duino/X-NUCLEO-LED61A1
STM32duino HTS221: https://github.com/stm32duino/HTS221
STM32duino LPS25HB: https://github.com/stm32duino/LPS25HB
STM32duino LSM6DS3: https://github.com/stm32duino/LSM6DS3
STM32duino LSM6DSO: https://github.com/stm32duino/LSM6DSO
STM32duino LIS2DW12: https://github.com/stm32duino/LIS2DW12
STM32duino LIS2MDL: https://github.com/stm32duino/LIS2MDL
STM32duino LPS22HH: https://github.com/stm32duino/LPS22HH
STM32duino STTS751: https://github.com/stm32duino/STTS751
STM32duino S2-LP: https://github.com/stm32duino/S2-LP
STM32duino M95640-R: https://github.com/stm32duino/M95640-R
STM32duino X-NUCLEO-IKS02A1 Audio: https://github.com/stm32duino/X-NUCLEO-IKS02A1-Audio

Documentation

The datasheets of the several components are available at

License

cparata/FP_Examples

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Error
Looks like something went wrong!

Packages