React Native using shadow-cljs in 3 minutes

The fastest way a ClojureScript coder can get started with React Native development. Prove me wrong.

This is an example project, only slightly beyond Hello World, using: shadow-cljs, React Native, Expo, Reagent, and re-frame.

Check this video out for a demo of this project.

ClojureScript ❤️ React Native

Follow along to get started. There are instructions for Calva, Emacs/CIDER, Cursive, and the command line. It is assumed you have Java and Node installad as well as dev tool chains for the platforms you are targeting. (If you are targeting the Web, then Chrome is enough.)

Installing

To facilitate that you can easily try this out without installing anything globally on your machine, this project installs everything it needs locally in node_modules. Then npx is used to execute tools like expo-cli.

To install dependencies, and setup the project, run:

npm i

From there use your favorite editor and/or the prompt.

Using VS Code + Calva

Install the Calva extension in VS Code.
Open the project in VS Code. Then:
Run the Calva command Start a Project REPL and Connect (aka Jack-in)
1. Select the project type Hello RN Shadow.
2. Wait for shadow to build the project.
Then Run Build Task. This will start Expo and the Metro builder. Wait for it to fire up Expo DevTools in your browser.
1. Click Run in web browser
When the app is running the Calva CLJS REPL can be used. Confirm this by evaluating something like:
```
(js/alert "Hello world!")
```
(You should see the alert pop up where the app is running.)
Hack away!

Of course you should try to fire up the app on all simulators, emulators and phones you have as well. The Expo UI makes this really easy.

Using Emacs with CIDER

Open Emacs and a bash shell:

Run npx shadow-cljs compile :app to perform an initial build of the app.
In Emacs open one of the files in the project (deps.edn is fine)
From that buffer, do cider-jack-in-clojurescript [C-c M-J] to launch a REPL. Follow the series of interactive prompts in the minibuffer:
1. select shadow-cljs as the command to launch
2. select shadow as the repl type
3. select :app as the build to connect
4. and optionally answer y or n to the final question about opening the shadow-cljs UI in a browser. At this point shadow-cljs will be watching the project folder and running new builds of the app if any files are changed. You'll also have a REPL prompt, however the REPL doesn't work because it isn't connected to anything. The app isn't running yet.
In a shell run npm run ios (same as npx expo start -i). This starts the Metro bundler, perform the bundling, launch the iPhone simulator, and transmit the bundled app. Be patient at this step as it can take many seconds to complete. When the app is finally running expo will display the message:
```
WebSocket connected!
REPL init successful
```
Once you see that the REPL is initalized, you can return to Emacs and confirm the REPL is connected and functional:
```
cljs.user> (js/alert "hello world!")
```
Which should pop-up a modal alert in the simulator, confirming the app is running and the REPL is connected end to end.

Using IntelliJ + Cursive REPL

Follow the instructions specified in Or the Command line.
Create a Maven POM using shadow-cljs pom, as described in the Shadow doc.
There are now two options
1. If you already have a project open, open the project in IntelliJ using File | New | Project from existing sources... and indicating the pom.xml file.
2. If you're at the welcome screen, press the "Open" button and navigate to the pom.xml.
Ensure the project has an SDK configured using File | Project Structure, and checking under Project.
The project comes with a REPL run configuration called "REPL". Run the REPL using the Run | Run 'REPL' menu item, or the toolbar button.
Run the commands in Using ClojureScript REPL

Or the Command line

$ npm i
$ npx shadow-cljs watch app
# wait for first compile to finish or expo gets confused 
# on another terminal tab/window:
$ npm start

This will run Expo DevTools at http://localhost:19002/

To run the app in browser using expo-web (react-native-web), press w in the same terminal after expo devtools is started. This should open the app automatically on your browser after the web version is built. If it does not open automatically, open http://localhost:19006/ manually on your browser.

Note that you can also run the following instead of npm start to run the app in browser:

# same as npx expo start --web
$ npm run web

# or

# same as npx expo start --web-only
$ npm run web-only

Using ClojureScript REPL

Once the app is deployed and opened in phone/simulator/emulator/browser, connect to nrepl and run the following:

(shadow/nrepl-select :app)

NB: Calva users don't need to do this.

To test the REPL connection:

(js/alert "Hello from Repl")

Command line CLJS REPL

Shadow can start a CLJS repl for you, if you prefer to stay at the terminal prompt:

$ npx shadow-cljs cljs-repl :app

Disabling Expo Fast Refresh

You will need to disable Fast Refresh provided by the Expo client, which conflicts with shadow-cljs hot reloading. You really want to use Shadow's, because it is way better and way faster than the Expo stuff is.

For the iOS and Android there is a Disable Fast Refresh option in the development menu. NB: Often you need to first enable it and then disable it.

For the web app there is a webpack.config.js in this repo that is setup to stop Webpack from refreshing saved files, so that should work out-of-the-box.

Live Reload, Hot Reload, Fast Refresh...

It's complicated. Expo's/React Native's Fast Refresh has gone through several changes. First there were only Live Reload, which is an old school reload of the full app, albeit automatic. Then came Hot Reload which lived side by side with the live reload, but was mutually exclusive. Hot reload is faster and smarter. Presumably it can keep state between reloads in vanilla React Native projects. Both have lately been replaced with Hot Refresh. Except for when developing Web apps, when you have Webpack Live Reload (which is disabled in this project).

Production builds

A production build involves first asking shadow-cljs to build a release, then to ask Expo to work in Production Mode.

Kill the watch and expo tasks.
Execute shadow-cljs release app
Start the expo task (as per above)
1. Enable Production mode.
2. Start the app.

Using EAS Build

expo build is the classic way of building an Expo app, and eas build is the new version of expo build. Using EAS Build currently requires an Expo account with a paid plan subscription.

The steps below provide an example of using EAS Build to build an apk file to run on an Android emulator or device.

Install the latest EAS CLI by running npm install -g eas-cli
Log into your Expo account
Configure EAS Build in your project with eas build:configure.

Make your eas.json file contents look like this:

{
  "build": {
    "production": {},
    "development": {
      "distribution": "internal",
      "android": {
        "buildType": "apk"
      },
      "ios": {
        "simulator": true
      }
    }
  }
}

Commit your changes, run eas build --profile development, and follow the prompts.
Navigate to the URL given by the command to monitor the build. When it completes, download the apk and install it on your device or emulator.

See the EAS Build docs for more information.

If you want to use EAS Build with a project not based on this template, see this PR for information about how your project can be set up to avoid an error during the build process.

Note: The eas-build-pre-install.sh script makes EAS install Java in the MacOS environment when running a build for iOS. This ensures that shadow-cljs can be run in the EAS pipeline to build your ClojureScript code.

"Known good" toolchain configurations

This repository provides a baseline setup for a React Native application. However newcomers may still have problems getting up in running "in 3 minutes" because of obscure dependencies on supporting tools such as the Java and Node runtimes. So while we can't definitively show every viable configuration, we can at least maintain what's known to work, especially when dependencies are bumped.

Expo SDK	35	35
clojure	1.10.1	1.10.1
clojurescript	1.10.520	1.10.597
expo-cli	3.4.1	3.9.1
expo	35.0.0	35.0.0
jdk	openjdk 1.8.0_222	openjdk 1.8.0_222
node	10.17.0	10.17.0
re-frame	0.11.0-rc2	0.11.0-rc3
react	16.9.0	16.9.0
react-native	0.59.8	0.59.8
reagent	0.9.0-rc2	0.9.0-rc3
shadow-cljs (cli)	2.8.69	2.8.78
shadow-cljs (jar)	2.8.69	2.8.78
yarn	1.19.1	1.19.1

When in doubt, a script is provided in this repo (etc/toolchain-report) to query what versions you have. This script is NOT needed for app development, building, or releasing, but may come in handy if you're having trouble getting up and running. toolchain-report requires joker, a portable and fast dialect of clojure implemented in go. See the joker repo on github for installation instructions.

Some notes from Thomas Heller

(This project is built from this example of his: https://github.com/thheller/reagent-expo)

The :app build will create an app/index.js. In release mode that is the only file needed. In dev mode the app directory will contain many more .js files.

:init-fn is called after all files are loaded and in the case of expo must render something synchronously as it will otherwise complain about a missing root component. The shadow.expo/render-root takes care of registration and setup.

Source maps don't seem to work properly. metro propably doesn't read input source maps when converting sources as things are correctly mapped to the source .js files but not their sources.

Initial load in dev is quite slow since metro processes the generated .js files.

reagent.core loads reagent.dom which will load react-dom which we don't have or need. Including the src/main/reagent/dom.cljs to create an empty shell. Copied from re-natal.

bpringe/rn-rf-shadow

ErrorLooks like something went wrong!

About

Resources

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages