Node Hue API

An API library for Node.js that interacts with the Philips Hue Bridge to control Philips Hue Light Bulbs and Philips Living Color Lamps.

This library abstracts away the actual Philips Hue Bridge REST API and provides all of the features of the Phillips API and a number of useful functions to control the lights and bridge remotely.

The library has undergone a large update for version 0.2.x, where it now supports callbacks and Q promises for the functions of the API. So for each function in the API, if a callback is provided, then a callback will be used to return any results or notification of success, in a true Node.js fashion. If the callback is omitted then a promise will be returned for use in chaining or in most cases simpler handling of the results.

When using Q promises, it is necessary to call done() on any promises that are returned, otherwise errors can be swallowed silently.

Change Log

For a list of changes, please refer to the change log; Changes

Work In Progress

There is still some work to be done around completing the ability to define schedules in a better way that properly validates the command that is to be run as part of the schedule. With the changes introduced in version 0.2.0 of this library it should be easier to accomplish in an upcoming release.

The public API as of version 0.2.0+ is close to complete (at least for the current version of the Phillips Hue Bridge firmware), and as such there will be no breaking changes to the library that has occurred in moving from version 0.1.x to 0.2.x.

Philips Hue Resources

There are a number of resources where users have detailed documentation on the Philips Hue Bridge;

The Official Phillips Hue Documentation http://www.developers.meethue.com
Unofficial Hue Documentation: http://burgestrand.github.com/hue-api/
Hack the Hue: http://rsmck.co.uk/hue
Hue Hackers Mailing List: https://groups.google.com/forum/#!forum/hue-hackers

Installation

NodeJS application using npm:

$ npm install node-hue-api

Examples

Locating a Philips Hue Bridge

There are two functions available to find the Phillips Hue Bridges on the network nupnpSearch() and upnpSearch(). Both of these methods are useful if you do not know the IP Address of the bridge already.

The offical Hue documentation recommends an approach to finding bridges by using both UPnP and N-UPnP in parallel to find your bridges on the network. This API library provided you with both options, but leaves it to the developer to decide on the approach to be used, i.e. fallback, parallel, or just one type.

nupnpSearch() or locateBridges()

This API function makes use of the official API endpoint that reveals the bridges on a network. It is a call through to http://meethue.com/api/nupnp which may not work in all circumstances (your bridge must have signed into the methue portal), in which case you can fall back to the slower upnpSearch() function.

This function is considerably faster to resolve the bridges < 500ms compared to 5 seconds to perform a full search on my own network.

var hue = require("node-hue-api");

var displayBridges = function(bridge) {
	console.log("Hue Bridges Found: " + JSON.stringify(bridge));
};

// --------------------------
// Using a promise
hue.nupnpSearch().then(displayBridges).done();

// --------------------------
// Using a callback
hue.nupnpSearch(function(err, result) {
	if (err) throw err;
	displayBridges(result);
});

The results from this call will be of the form;

Hue Bridges Found: [{"id":"001788fffe096103","ipaddress":"192.168.2.129","name":"Philips Hue","mac":"00:00:00:00:00"}]

upnpSearch or searchForBridges()

This API function utilizes a network scan for the SSDP responses of devices on a network. It is the only method that does not support callbacks, and is only in the API as a fallback since Phillips provided a quicker discovery method once the API was officially released.

var hue = require("node-hue-api"),
	timeout = 2000; // 2 seconds

var displayBridges = function(bridge) {
	console.log("Hue Bridges Found: " + JSON.stringify(bridge));
};

hue.upnpSearch(timeout).then(displayBridges).done();

A timeout can be provided to the function to increase/decrease the amount of time that it waits for responses from the search request, by default this is set to 5 seconds (the above example sets this to 2 seconds).

The results from this function call will be of the form;

Hue Bridges Found: [{"id":"001788096103","ipaddress":"192.168.2.129"}]

Registering a new Device/User with the Bridge

Once you have discovered the IP Address for your bridge (either from the UPnP/N-UPnP function, or looking it up on the Philips Hue website), then you will need to register your application with the Hue Bridge.

Registration requires you to issue a request to the Bridge after pressing the Link Button on the Bridge (although you can now do this via the API too if you already have an existing user account on the Bridge).

This library offer two functions to register new devices/users with the Hue Bridge. These are detailed below.

Bridge Configuration

You can obtain a summary of the configuration of the Bridge using the config() or connect() functions;

var HueApi = require("node-hue-api").HueApi;

var displayResult = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var hostname = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api;

api = new HueApi(hostname, username);

// --------------------------
// Using a promise
api.connect().then(displayResult).done();

// --------------------------
// Using a callback
api.connect(function(err, config) {
    if (err) throw err;
    displayResult(config);
});

This will provide results detailing the configuration of the bridge (IP Address, Name, Link Button Status, Defined Users, etc...);

{
  "name": "Philips hue",
    "zigbeechannel": 11,
    "mac": "xx:xx:xx:xx:xx:xx",
    "dhcp": false,
    "ipaddress": "192.168.2.245",
    "netmask": "255.255.255.0",
    "gateway": "192.168.2.254",
    "proxyaddress": "none",
    "proxyport": 0,
    "UTC": "2015-01-10T13:18:51",
    "localtime": "2015-01-10T13:18:51",
    "timezone": "Europe/London",
    "whitelist": {
      "fG2EZIaS2pZuSeKH": {
        "last use date": "2015-01-09T22:54:21",
        "create date": "2014-05-18T17:11:10",
        "name": "philips.lighting.hue#iPad"
      },
      "0f607264fc6318a92b9e13c65db7cd3c": {
        "last use date": "2014-12-23T17:25:16",
        "create date": "2014-12-23T17:14:30",
        "name": "iPad"
      }
    },
    "swversion": "01018228",
    "apiversion": "1.5.0",
    "swupdate": {
      "updatestate": 0,
      "checkforupdate": false,
      "devicetypes": {
        "bridge": false,
        "lights": []
      },
      "url": "",
      "text": "",
      "notify": false
    },
    "linkbutton": false,
    "portalservices": true,
    "portalconnection": "connected",
    "portalstate": {
      "signedon": true,
      "incoming": true,
      "outgoing": true,
      "communication": "connected"
    }
}

If you invoke the config() or connect() functions with an invalid user account (i.e. one that is not valid) then results of the name and software version will be returned from the bridge with no other information;

{
  "name": "Philips hue",
  "swversion": "01005825"
}

For this reason, if you want to validate that the user account used to connect to the bridge is correct, you will have to look for a field that is not present in the above result, like the mac, ipaddress or linkbutton would be good properties to check.

Software and API Version

The version of the software and API for the bridge is available from the config function, but out of convenience there is also a getVersion function which filters the config return data to just give you the version details.

var HueApi = require("node-hue-api").HueApi;

var displayResult = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var hostname = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api;

api = new HueApi(hostname, username);

// --------------------------
// Using a promise
api.getVersion().then(displayResult).done();

// --------------------------
// Using a callback
api.getVersion(function(err, config) {
    if (err) throw err;
    displayResult(config);
});

This will result in data output as follows;

{
    "name": "Philips hue",
    "version": {
        "api": "1.5.0",
        "software": "01018228"
    }
}

Registering without an existing Device/User ID

A user can be registered on the Bridge using registerUser() or createUser() functions. This is useful when you have not got an existing user account on the Bridge to use to access its protected functions.

var HueApi = require("node-hue-api").HueApi;

var hostname = "192.168.2.129",
    newUserName = null // You can provide your own username value, but it is normally easier to leave it to the Bridge to create it
    userDescription = "device description goes here";

var displayUserResult = function(result) {
    console.log("Created user: " + JSON.stringify(result));
};

var displayError = function(err) {
    console.log(err);
};

var hue = new HueApi();

// --------------------------
// Using a promise
hue.registerUser(hostname, newUserName, userDescription)
    .then(displayUserResult)
    .fail(displayError)
    .done();

// --------------------------
// Using a callback (with default description and auto generated username)
hue.createUser(hostname, null, null, function(err, user) {
	if (err) throw err;
	displayUserResult(user);
});

If the username value passed in to register a new user is null or undefined then the Hue Bridge will create a new user with a generated username. It is suggested to allow the bridge to generate this for you automatically.

The description for the user account is also optional, if you do nto provide one, then the default of "Node.js API" will be set.

There is a convenience method, if you have a existing user account when you register a new user, that will programmatically press the link button for you. See the details for the function pressLinkButton() for more details.

Registration Output/Error

When registering a new user you will get the username created, or an error that will likely be due to not pressing the link button on the Bridge.

If the link button was NOT pressed on the bridge, then you will get an ApiError thrown, which will be captured by the displayError function in the above examples.

Api Error: link button not pressed

If the link button was pressed you should get a response that will provide you with a hash to use as the username for connecting with the Hue Bridge, e.g.

033a6feb77750dc770ec4a4487a9e8db

Validating a Connection to a Philips Hue Bridge

To connect to a Philips Hue Bridge and obtain some basic details about it you can use the connect() or config() functions which were detailed above.

Obtaining the Complete State of the Bridge

If you have a valid user account in the Bridge, then you can obtain the complete status of the bridge using getFullState(). This function is computationally expensive on the bridge and should not be invoked frequently.

var HueApi = require("node-hue-api").HueApi;

var displayResult = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var hostname = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api;

api = new HueApi(hostname, username);

// --------------------------
// Using a promise
api.getFullState().then(displayResult).done();

// --------------------------
// Using a callback
api.getFullState(function(err, config) {
    if (err) throw err;
    displayResult(config);
});

This will produce a JSON response similar to the following (large parts have been removed from the result below);

{
  "lights": {
    "5": {
      "state": {
        "on": false,
        "bri": 0,
        "hue": 6144,
        "sat": 254,
        "xy": [
          0.6376,
          0.3563
        ],
        "alert": "none",
        "effect": "none",
        "colormode": "hs",
        "reachable": true
      },
      "type": "Color light",
      "name": "Living Color TV",
      "modelid": "LLC007",
      "swversion": "4.6.0.8274",
      "pointsymbol": {
        "1": "none",
        "2": "none",
        "3": "none",
        "4": "none",
        "5": "none",
        "6": "none",
        "7": "none",
        "8": "none"
      }
    }
  },
  "groups": {
    "1": {
      "action": {
        "on": false,
        "bri": 63,
        "hue": 65527,
        "sat": 253,
        "xy": [
          0.6736,
          0.3221
        ],
        "ct": 500,
        "effect": "none",
        "colormode": "ct"
      },
      "lights": [
        "1",
        "2",
        "3"
      ],
      "name": "NodejsApiTest"
    }
  },
  "config": {
  	...
  	"whitelist": {
          "51780342fd7746f2fb4e65c30b91d7": {
            "last use date": "2013-05-29T20:29:51",
            "create date": "2013-05-29T20:29:51",
            "name": "Node.js API"
          },
          "08a902b95915cdd9b75547cb50892dc4": {
            "last use date": "1987-01-06T22:53:37",
            "create date": "2013-04-02T13:39:18",
            "name": "Node Hue Api Tests User"
          }
        },
	"swversion": "01005825"
	...
  },
  "schedules": {
    "1": {
      "name": "Updated Name",
      "description": "Like anyone really needs a wake up on Xmas day...",
      "command": {
        "address": "/api/08a902b95915cdd9b75547cb50892dc4/lights/5/state",
        "body": {
          "on": true
        },
        "method": "PUT"
      },
      "time": "2014-01-01T07:00:30",
      "created": "1970-01-01T00:00:00"
    }
  },
  "scenes": {}

Obtaining Registered Users/Devices

To obtain the details for all the registered users/devices for a Hue Bridge you can use the registeredUsers() function.

var HueApi = require("node-hue-api").HueApi;

var displayResult = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var hostname = "192.168.2.129";
var username = "08a902b95915cdd9b75547cb50892dc4";
var api = new HueApi(hostname, username);

// --------------------------
// Using a promise
api.registeredUsers().then(displayResult).done();

// --------------------------
// Using a callback
api.registeredUsers(function(err, config) {
    if (err) throw err;
    displayResult(config);
});

This will produce a JSON response that has a root key of "devices" that has an array of registered devices/users for the Bridge. An example of the result is shown below

{
  "devices": [
    {
      "name": "Node API",
      "username": "083b2f780c78555d532b78544f135798",
      "created": "2013-01-02T19:17:02",
      "accessed": "2012-12-24T20:18:55"
    },
    {
      "name": "iPad",
      "username": "279c26146e3318997d69a8a66330b5f5",
      "created": "2012-12-24T14:05:25",
      "accessed": "2013-01-04T21:37:29"
    },
    {
      "name": "iPhone",
      "username": "fcb0a47cd664f0cbaa34d36def54577d",
      "created": "2012-12-24T17:13:54",
      "accessed": "2013-01-03T20:50:40"
    }
  ]
}

Deleting a User/Device

To delete a user or device from the Bridge, you will need an existing user account to authenticate as, and then you can call deleteUser() or unregisterUser() to remove a user from the Bridge Whitelist;

var HueApi = require("node-hue-api").HueApi;

var hostname = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4";

var displayUserResult = function(result) {
    console.log("Deleted user: " + JSON.stringify(result));
};

var displayError = function(err) {
    console.log(err);
};

var hue = new HueApi(hostname, username);

// --------------------------
// Using a promise
hue.deleteUser("2b997aae306f15a734d8d1c2315d47cb")
    .then(displayUserResult)
    .fail(displayError)
    .done();

// --------------------------
// Using a callback
hue.unregisterUser("1ab7d44219e64c373b4b915e34494443", function(err, user) {
    if (err) throw err;
    displayUserResult(user);
});

Which will result in a true result if the user was removed, or an error if any other result occurs (i.e. the user does not exist) as shown below;

{
	message: 'resource, /config/whitelist/2b997aae306f15a734d8d1c2315d47cb, not available',
	type: 3,
	address: '/config/whitelist/2b997aae306f15a734d8d1c2315d47cb'
}

Finding the Lights Attached to the Bridge

To find all the lights that are registered with the Hue Bridge, so that you might be able to interact with them, you can use the lights() function.

var HueApi = require("node-hue-api").HueApi;

var displayResult = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api;

api = new HueApi(host, username);

// --------------------------
// Using a promise
api.lights()
    .then(displayResult)
    .done();

// --------------------------
// Using a callback
api.lights(function(err, lights) {
    if (err) throw err;
    displayResult(lights);
});

This will output a JSON object that will provide details of the lights that the Hue Bridge knows about;

{
  "lights": [
    {
      "id": "1",
      "name": "Lounge Living Color"
    },
    {
      "id": "2",
      "name": "Right Bedside"
    },
    {
      "id": "3",
      "name": "Left Bedside"
    },
    {
      "id": "4",
      "name": "Lounge Standing Lamp"
    }
  ]
}

The "id" values are what you will need to use to interact with the light directly and set the states on it (like on/off, color, etc...).

Interacting with a Hue Light or Living Color Lamp

The library provides a function, setLightState(), that allows you to set the various states on a light connected to the Hue Bridge. You can either provide a JSON object that contains the values to set the various state values, or you can use the provided lightState object in the library to build the state object ot pass to the function. See below for examples.

Using LightState to Build States

The lightState object provides a fluent way to build up a simple or complex light states that you can pass to a light.

The majority of the various states that you can set on a Hue Light or Living Color lamp are available from this object.

LightState Options

The lightState object provides the following methods that can be used to build various states (all of which can be combined);

on()
off()
alert() flash the light once
alert(isLong) if isLong is true then the alert will flash 10 times
white(colorTemp, brightPercent) where colorTemp is a value between 154 (cool) and 500 (warm) and brightPercent is 0 to 100
brightness(percent) where percent is the brightness from 0 to 100
hsl(hue, saturation, brightPercent) where hue is a value from 0 to 359, saturation is a percent value from 0 to 100, and brightPercent is from 0 to 100
xy(x, y) where x and y is from 0 to 1 in the Philips Color co-ordinate system
rgb(red, green, blue) where red, green and blue are values from 0 to 255 - Not all colors can be created by the lights
transition(seconds) this can be used with another setting to create a transition effect (like change brightness over 10 seconds)
effect(value) this can be set to 'colorloop' or 'none'. The 'colorloop' rotates through all available hues at the current saturation level

Creating Complex States

The LightState object provides a simple way to build up JSON object to set multiple values on a Hue Light.

To turn on a light and set it to a warm white color;

var hue = require("node-hue-api"),
    HueApi = hue.HueApi,
    lightState = hue.lightState;

var displayResult = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username),
    state;

// Set light state to 'on' with warm white value of 500 and brightness set to 100%
state = lightState.create().on().white(500, 100);

// --------------------------
// Using a promise
api.setLightState(5, state)
    .then(displayResult)
    .done();

// --------------------------
// Using a callback
api.setLightState(5, state, function(err, lights) {
    if (err) throw err;
    displayResult(lights);
});

The lightState object will ensure that the values passed into the various state functions are correctly bounded to avoid errors when setting them. For example the color temperature value (which determines the white value) must be between 154 and 500. If you pass in a value outside of this range then the lightState function call will set it to the closest valid value.

Currently the lightState object will combine together all the various state values that get set by the various function calls. This means that if you do create a combination of conflicting values, like on and off the last one set will be the actual value provided in the corresponding JSON object;

// This will result in a JSON object for the state that sets the brightness to 100% but turn the light "off"
state = lightState.create().on().brightness(100).off();

When using lightState it is currently recommended to create a new state object each time you want to build a new state, otherwise you will get a combination of all the previous settings as well as the new values.

Turning a Light On/Off using LightState

var hue = require("node-hue-api"),
    HueApi = hue.HueApi,
    lightState = hue.lightState;

var displayResult = function(result) {
    console.log(result);
};

var displayError = function(err) {
    console.error(err);
};

var host = "192.168.2.129",
    username = "033a6feb77750dc770ec4a4487a9e8db",
    api = new HueApi(host, username),
    state = lightState.create();

// --------------------------
// Using a promise

// Set the lamp with id '2' to on
api.setLightState(2, state.on())
    .then(displayResult)
    .fail(displayError)
    .done();

// Now turn off the lamp
api.setLightState(2, state.off())
	.then(displayResult)
    .fail(displayError)
    .done();

// --------------------------
// Using a callback
// Set the lamp with id '2' to on
api.setLightState(2, state.on(), function(err, result) {
	if (err) throw err;
	displayResult(result);
});

// Now turn off the lamp
api.setLightState(2, state.off(), function(err, result) {
	if (err) throw err;
	displayResult(result);
});

If the function call is successful, then you should get a response of true. If the call fails then an ApiError will be generated with the failure details.

Setting Light States using custom JSON Object

You can pass in your own JSON object that contain the setting(s) that you wish to pass to the light via the bridge.

var HueApi = require("node-hue-api").HueApi;

var displayResult = function(result) {
    console.log(result);
};

var displayError = function(err) {
    console.error(err);
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api;

api = new HueApi(host, username);
api.setLightState(2, {"on": true}) // provide a value of false to turn off
    .then(displayResult)
    .fail(displayError)
    .done();

If the function call is successful, then you should get a response of true. If the call fails then an ApiError will be generated with the failure details.

Getting the Current Status/State for a Light

To obtain the current state of a light from the Hue Bridge you can use the lightStatus() function;

var HueApi = require("node-hue-api").HueApi;

var displayStatus = function(status) {
    console.log(JSON.stringify(status, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username);

// Obtain the Status of Light '5'

// --------------------------
// Using a promise
api.lightStatus(5)
    .then(displayStatus)
    .done();

// --------------------------
// Using a callback
api.lightStatus(5, function(err, result) {
    if (err) throw err;
    displayStatus(result);
});

This will produce a JSON object detailing the status of the lamp;

{
  "state": {
    "on": true,
    "bri": 254,
    "hue": 34515,
    "sat": 236,
    "xy": [
      0.3138,
      0.3239
    ],
    "ct": 153,
    "alert": "none",
    "effect": "none",
    "colormode": "ct",
    "reachable": true
  },
  "type": "Extended color light",
  "name": "Left Bedside",
  "modelid": "LCT001",
  "swversion": "65003148",
  "pointsymbol": {
    "1": "none",
    "2": "none",
    "3": "none",
    "4": "none",
    "5": "none",
    "6": "none",
    "7": "none",
    "8": "none"
  }
}

Searching for New Lights

When you have added new lights to the system, you need to invoke a search to discover these new lights to allow the Bridge to interact with them. The searchForNewLights() function will invoke a search for any new lights to be added to the system.

When you invoke a scan for any new lights in the system, the previous search results are destroyed.

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username);

// --------------------------
// Using a promise
api.searchForNewLights()
	.then(displayResults)
	.done();

// --------------------------
// Using a callback
api.searchForNewLights(function(err, result) {
	if (err) throw err;
	displayResults(result);
});

The result from this call should be true if a search was successfully triggered. It can take some time for the search to complete.

Obtaining Newly Discovered Lights

Once a search has been completed, then the newly discovered lights can be obtained using the newLights() call.

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username);

// --------------------------
// Using a promise
api.newLights()
    .then(displayResults)
    .done();

// --------------------------
// Using a callback
api.newLights(function(err, result) {
    if (err) throw err;
    displayResults(result);
});

The results from this call should be the new lights that were found during the previous search, and a lastscan value that will be the date that the last scan was performed, which could be none if a search has never been performed.

{
  "lastscan": "2013-06-15T14:45:23"
}

Naming Lights

It is possible to name a light using the setLightName() function;

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username);

// --------------------------
// Using a promise
api.setLightName(5, "A new Name")
    .then(displayResults)
    .done();

// --------------------------
// Using a callback
api.setLightName(5, "Living Color TV", function(err, result) {
    if (err) throw err;
    displayResults(result);
});

If the call is successful, then true will be returned by the function call, otherwise a ApiError will result.

Working with Groups

The Hue Bridge can support groups of lights so that you can do things like setting a colour and status to a group of lights instead of just a single light.

There is a special "All Lights" Group with an id of 0 that is defined in the bridge that a user cannot modify.

Obtaining all Groups from the Bridge

To obtain all the groups defined in the bridge use the groups() function;

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username);

// Obtain all the defined groups in the Bridge

// --------------------------
// Using a promise
api.groups()
    .then(displayResults)
    .done();

// --------------------------
// Using a callback
api.groups(function(err, result) {
    if (err) throw err;
    displayResults(result);
});

This will produce an array of values detailing the id and names of the groups;

[
  {
    "id": "0",
    "name": "Lightset 0",
    "type": "LightGroup"
  },
  {
    "id": "1",
    "name": "VRC 1",
    "type": "LightGroup",
    "lights": [1, 2, 3, 4, 5]
  }
]

Please note, the Lightset 0 group, is a special instance and will always exist and have the id of "0" as specified in the Hue Api documentation. Due to this internal group being maintained by the bridge internally, it will not return an array of light ids like the other groups in the results returned from a call to groups().

If you need to get the full details of the Lightset 0 groups, then you can obtain that by using the getGroup() function, using an id argument of 0.

The groups function will return all types of Groups in the bridge, these include new types of groups that support the new [Hue Beyond|http://www2.meethue.com/en-us/the-range/hue-beyond].

To support the addition of these new types of groups, and the fact that most users will only want a subset of the types there are now three new functions that will filter the types of groups for you;

luminaires Will obtain only the Luminaire groups (i.e. a collection of lights that make up a single device). These are not user modifiable.
lightSources Will obtain the Lightsource groups (i.e. a subset of the lights in a Luminarie). These are not user modifiable.
lightGroups Will obtain the defined groups in the bridge

Obtaining the Details of a Group Definition

To get the specific details of the lights that make up a group (and some extra information like the last action that was performed) use the getGroup(id) function.

In Hue Bridge API version 1.4+ the full data for the group will be returned when obtaining all groups via the groups or lightGroups functions. The only exception to this is the special All Lights Group, id 0, which requires the use of a specific lookup to obtain the full details.

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username);

// --------------------------
// Using a promise
api.getGroup(0)
    .then(displayResults)
    .done();

// --------------------------
// Using a callback
api.getGroup(0, function(err, result) {
    if (err) throw err;
    displayResults(result);
});

Which will return produce a result like;

{
  "id": "0",
  "name": "Lightset 0",
  "lights": [
    "1",
    "2",
    "3",
    "4",
    "5"
  ],
  "type": "LightGroup",
  "lastAction": {
    "on": true,
    "bri": 128,
    "hue": 6144,
    "sat": 254,
    "xy": [
      0.6376,
      0.3563
    ],
    "ct": 500,
    "effect": "none",
    "colormode": "ct"
  }
}

Setting the Light State for a Group

A function setGroupLightState() exists for interacting with a group of lights to be able to set all the lights to a particular state. This function is identical to that of the setLightState() function above, except that it works on groups instead of a single light.

Create a New Group

To create a new group use the createGroup(name, lightIds) function;

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username);

// Create a new Group on the bridge

// --------------------------
// Using a promise
api.createGroup("a new group", [4, 5])
    .then(displayResults)
    .done();

// --------------------------
// Using a callback
api.createGroup("group name", [1, 4, 5], function(err, result){
    if (err) throw err;
    displayResults(result);
});

The function will return a promise with a result that contains the id of the newly created group;

{
  "id": "2"
}

Updating a Group

It is possible to update the associated lights and the name of a group after it has been created on the bridge. The function updateGroup() allows you to do this.

You can set the name, the lightIds or both with this function, just omit what you do not want to set, it will work out which parameter was passed based on type, a String for the name and an array for the light ids.

When invoking this function true will be returned if the Bridge accepts the requested change. It can take take a short period of time before the bridge will actually reflect the change requested, in experience 1.5 seconds has always covered the necessary time to effect the change, but it could be quicker than that.

Changing the name of an existing group;

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username);

// Update the name of the group

// --------------------------
// Using a promise
api.updateGroup(1, "new group name")
    .then(displayResults)
    .done();

// --------------------------
// Using a callback
api.updateGroup(1, "new group name", function(err, result){
    if (err) throw err;
    displayResults(result);
});

Changing the lights associated with an existing group;

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username);

// Update the lights in the group to ids 1, 2, and 3.

// --------------------------
// Using a promise
api.updateGroup(1, [1, 2, 3])
    .then(displayResults)
    .done();

// --------------------------
// Using a callback
api.updateGroup(1, [1, 2, 3], function(err, result){
    if (err) throw err;
    displayResults(result);
});

Changing both the name and the lights for an existing group;

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username);

// Update both the name and the lights in the group to ids 4, 5.

// --------------------------
// Using a promise
api.updateGroup(1, "group name", [4, 5])
    .then(displayResults)
    .done();

// --------------------------
// Using a callback
api.updateGroup(1, "group name", [4, 5], function(err, result){
    if (err) throw err;
    displayResults(result);
});

Deleting a Group

The deletion of groups is not officially supported in the released Hue API from Phillips (version 1.0), but it is still possible to delete groups, but use at your own risk (you may have to reset the bridge to factory defaults if something goes wrong).

To delete a group use the deleteGroup() function;

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username);

// Create a new Group on the bridge

// --------------------------
// Using a promise
api.deleteGroup(3)
    .then(displayResults)
    .done();

// --------------------------
// Using a callback
api.deleteGroup(4, function(err, result){
    if (err) throw err;
    displayResults(result);
});

This function call will return a true result in the promise chain if successful, otherwise an error will be thrown.

Working with Schedules

Obtaining all the Defined Schedules

To obtain all the defined schedules on the Hue Bridge use the schedules() function.

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username);

// --------------------------
// Using a promise
api.schedules()
    .then(displayResults)
    .done();

// --------------------------
// Using a callback
api.schedules(function(err, result){
    if (err) throw err;
    displayResults(result);
});

The function will return a promise that will provide an array of objects of id and name for each schedule;

[
  {
    "id": "1",
    "name": "Sample Schedule"
  },
  {
    "id": "2",
    "name": "Wake Up"
  }
]

Obtaining the details of a Schedule

To obtain the details of a schedule use the getSchedule(id) function;

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username),
    scheduleId = 1;

// --------------------------
// Using a promise
api.getSchedule(scheduleId)
    .then(displayResults)
    .done();

// --------------------------
// Using a callback
api.getSchedule(scheduleId, function(err, result){
    if (err) throw err;
    displayResults(result);
});

The promise returned by the function will return the details of the schedule in the following format;

{
  "name": "Sample Schedule",
  "description": "An example of a schedule",
  "command": {
    "address": "/api/08a902b95915cdd9b75547cb50892dc4/lights/5/state",
    "body": {
      "on": true
    },
    "method": "PUT"
  },
  "time": "2014-08-01T00:00:00",
  "id": 1
}

Creating a Schedule

Creating a schedule requires just two elements, a time at which to trigger the schedule and the command that will be triggered when the schedule is run. There are other optional values of a name and a description that can be provided to make the schedule easier to identify.

There are two functions that can be invoked to create a new schedule (which are identically implemented);

scheduleEvent(event, cb)
createSchedule(event, cb)

These functions both take an object the wraps up the scheduled event to be created. There are only two required properties of the object, time and command, with option properties name and description.

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username),
    scheduledEvent;

scheduledEvent = {
    "name": "Sample Schedule",
    "description": "A sample scheduled event to switch on a light",
    "time": "2013-12-24T00:00:00",
    "command": {
        "address": "/api/08a902b95915cdd9b75547cb50892dc4/lights/5/state",
        "method" : "PUT",
        "body"   : {
            "on": true
        }
    }
};

// --------------------------
// Using a promise
api.scheduleEvent(scheduledEvent)
    .then(displayResults)
    .done();

// --------------------------
// Using a callback
api.createSchedule(scheduledEvent, function(err, result){
    if (err) throw err;
    displayResults(result);
});

The result returned by the promise when creating a new schedule will be that of the id for the newly created schedule;

{
  "id": "1"
}

The command value must be a Hue Bridge API endpoint for it to correctly function, which means it must start with /api/<valid username>/. For now if using this function, you will have to use the exact API end point as specified in the Phillips Hue REST API.

To help with building a schedule and to perform some basic checking to ensure that values are correct/valid there is a helper module scheduleEvent which can be used the build a valid schedule object.

Using ScheduleEvent to build a Schedule

The scheduleEvent module/function is used to build up a schedule that the Hue Bridge can understand. It is not a requirement when creating schedules, but can eliminate some of the basic errors that can result when creating a schedule.

To obtain a scheduleEvent instance;

var scheduleEvent = require("node-hue-api").scheduledEvent;

var mySchedule = scheduleEvent.create();

This will give you a schedule object that has the following functions available to build a schedule;

withName(String) which will set a name for the schedule (optional)
withDescription(String) which will set a description for the schedule (optional)
withCommand(command) which will set the command object that the schedule will run
on(), at(), when() which all take a string or Date value to specify the time the schedule will run, if passing a string it must be valid when parsed by Date.parse()

The command object currently has to be specified as the Hue Bridge API documentation states which is of the form;

{
	"address": "/api/08a902b95915cdd9b75547cb50892dc4/lights/5/state",
    "method" : "PUT",
    "body"   : {
    	"on": true
    }
}

The above example command will switch on the light with id 5 for the username 08a902b95915cdd9b75547cb50892dc4.

If you use the withCommand() function then the address will be undergo basic validation to ensure it is an endpoint for the Hue Bridge which is a common mistake to make when crafting your own values.

Once a scheduleEvent has been built it can be passEd directly to the createSchedule(), scheduleEvent() or updateSchedule() function calls in the Hue API.

For example to create a new schedule that will turn on the light with id 5 at 07:00 on the 25th December 2013;

var hue = require("node-hue-api"),
    HueApi = hue.HueApi,
    scheduleEvent = hue.scheduledEvent;

var displayResult = function (result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username),
    mySchedule;

mySchedule = scheduleEvent.create()
    .withName("Xmas Day Wake Up")
    .withDescription("Like anyone really needs a wake up on Xmas day...")
    .withCommand(
    {
        "address": "/api/08a902b95915cdd9b75547cb50892dc4/lights/5/state",
        "method" : "PUT",
        "body"   : {
            "on": true
        }
    })
    .on("2013-12-25T07:00:00");

// --------------------------
// Using a promise
api.createSchedule(mySchedule)
    .then(displayResult)
    .done();

// --------------------------
// Using a callback
api.createSchedule(mySchedule, function(err, result) {
    if (err) throw err;
    displayResult(result);
});

Updating a Schedule

You can update an existing schedule using the updateSchedule() function;

var hue = require("node-hue-api"),
    HueApi = hue.HueApi,
    scheduleEvent = hue.scheduledEvent;

var displayResult = function (result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username),
    scheduleId = 1,
    updatedValues;

updatedValues = {
    "name": "Updated Name",
    "time": "January 1, 2014 07:00:30"
};

// --------------------------
// Using a promise
api.updateSchedule(scheduleId, updatedValues)
    .then(displayResult)
    .done();

// --------------------------
// Using a callback
api.updateSchedule(scheduleId, updatedValues, function(err, result) {
    if (err) throw err;
    displayResult(result);
});

The result from the promise will be an object with the properties of the schedule that were updated and true as the value of each one that was successful.

{
  "name": true,
  "time": true
}

Deleting a Schedule

All schedules in the Hue Bridge are removed once they are triggered. To remove an impending schedule use the deleteSchedule() function;

var hue = require("node-hue-api"),
    HueApi = hue.HueApi;

var displayResult = function (result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username),
    scheduleId = 1;

// --------------------------
// Using a promise
api.deleteSchedule(scheduleId)
    .then(displayResult)
    .done();

// --------------------------
// Using a callback
api.deleteSchedule(scheduleId, function(err, result) {
    if (err) throw err;
    displayResult(result);
});

If the deletion was successful, then true will be returned from the promise, otherwise an ApiError will be thrown, as in the case if the schedule does not exist.

Working with scenes

Obtaining all the Defined scenes

To obtain all the defined scenes on the Hue Bridge use the scenes() function.

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username);

// --------------------------
// Using a promise
api.scenes()
    .then(displayResults)
    .done();

// --------------------------
// Using a callback
api.scenes(function(err, result){
    if (err) throw err;
    displayResults(result);
});

The function will return a promise that will provide an array of objects of id and name for each schedule;

[
  {
    "id": "1",
    "name": "Jump! on 0"
  },
  {
    "id": "2",
    "name": "Jump! on 0"
  }
]

Additionally, bridge scenes should not be confused with the preset scenes stored in the Android and iOS apps. In the apps these scenes are stored internally. Once activated they may then appear as a bridge scene.

Creating a scene

Creating a scene requires a few things:

A scene id, required later to recall/modify the scene
A user friendly name
A number of lights to be part of the scene

var HueApi = require("node-hue-api").HueApi;

var displayResults = function(result) {
    console.log(JSON.stringify(result, null, 2));
};

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    api = new HueApi(host, username),
    scheduledEvent;

// --------------------------
// Using a promise

    api.createScene("199", "Test Scene", [4])
    .then(displayResults)
    .done();


// --------------------------
// Using a callback
api.createScene("199", "Test Scene", [4], function(err, result){
    if (err) throw err;
    displayResults(result);
});

The result returned by the promise when creating a new scene will be that of the id for the newly created schedule;

{
  "id": "1"
}

Modifying a scene

    // --------------------------
    // Using a promise
        api.modifyScene(199,4, {"on": true}) // provide a value of false to turn off
            .then(displayResults)
            .fail(displayError)
            .done();

    // --------------------------
    // Using a callback
        api.modifyScene(199,4, {"on": true}, function(err, result){
           if (err) throw err;
           displayResults(result);
       });

Recalling a scene

This is perhaps the reason for having scenes at all. The possibility to recall a scene for a group. By doing that it is possible to recall spefic setting in a simple way. You could for instance edit a scene using the ios/andriod apps and use this functinoality to recall those settings without releasing new code/configuration.

Recalling a scene is done by using the setGroupLightState functions but there are also two helper functions to make things more intuitive.

recallSceneById - recalls a scene for a group
recallSceneByName - recalls a scene for a group from the user friendly name The id is extracted from the name, if multiple ids is encountered which often is the case when a scene is edited via an ios/android app the last one is used. Currently this is the scene last saved this is an assumption bases on undocumented handling.

The examples below show the function `recallSceneById()`` The api is the for recallSceneByName same apart from applying a name instead of the id.

    // --------------------------
    // Using a promise

    api.recallSceneById(0,"199")
    .then(displayResults)
    .fail(displayError)
    .done();

    // --------------------------
    // Using a callback
        api.recallSceneById(0, "199", function(err, result){
           if (err) throw err;
           displayResults(result);
       });

Advanced Options

Timeouts

If there are issues with the Bridge not responding in time for a result of error to be delivered, then you may need to tweak the timeout settings for the API. When this happens you will get an ETIMEOUT error.

The way to set a maximum timeout when interacting with the bridge is done when you instantiate the HueApi.

var hue = require("node-hue-api"),
    HueApi = hue.HueApi;

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    timeout = 20000 // timeout in milliseconds
    api;

api = new HueApi(host, password, timeout);

The default timeout, when not specified will be 10000ms (10 seconds). This is usually enough time for the bridge to respond unless you are returning a very large result (like the complete state for the bridge in a large installation)

Bridge Port Number

If you are running your bridge over a router or using some kind of NAT, it may be possible that the Hue Bridge is not running on the default port. If this is the case, then you can set the port number as an advanced configuration option when creating the API connection to the bridge.

Please note that for normal usage, you should never set the port value.

var hue = require("node-hue-api"),
    HueApi = hue.HueApi;

var host = "192.168.2.129",
    username = "08a902b95915cdd9b75547cb50892dc4",
    timeout = 20000 // timeout in milliseconds,
    port = 8080 // not the default port for the bridge,
    api;

api = new HueApi(host, password, timeout, port);

License

Copyright 2013-2015. All Rights Reserved.

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this library except in compliance with the License.

You may obtain a copy of the License at http://www.apache.org/licenses/LICENSE-2.0.

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.

knsv/node-hue-api

ErrorLooks like something went wrong!

About

Resources

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages