ATtiny 10/20/85 Brakeout Board

Description

An ATtiny brakeout board for ATtiny 10/202/85. You can use it for any device you need it. It's desinged in Altium Designer 20 and you can open and edit the project under the file Sourcer/ATTINY.PrjPcb

How to print the board

Firstly clone the project by typing

$ git clone https://github.com/alex-z-charalampidis/attiny_brakeout_board.git

You can print the board by adding all the fabrication files in a single zip.

1) Copy the contents of Fabrication/Gerber and Fabrication/NC Drill under the same file

2) Zip them

3) Send them for fabrication to whicever provider you like (oshpark,jlcpcb,pcbway..)

PIN Layout

All the MCUs have a common VCC(5V or 3.3V) and GND

ATTiny10

BOARD	MCU
T1_P1	ADC0/PB0
T1_P3	ADC1/PB1
T1_P6	ADC3/PB3
T1_P4	ADC2/PB2
Datasheet

ATTiny202

BOARD	MCU
T2_P5	AI2/PA2
T2_P6	PA3
T2_P7	PA3/AI3
T2_P4	PA1/AI1
T2_P3	PA7/AI7
T2_P2	PA6/AI6
Datasheet

ATTiny85

BOARD	MCU
T8_P1	ADC0/PB5
T8_P2	ADC3/PCINT3/PB3
T8_P3	ADC2/PCINT4/PB4
T8_P7	ADC1/PCINT2/INT0/SCK/PB2
T8_P6	AIN1/PCINT1/MISO/PB1)
T8_P5	AIN0/PCINT0/MOSI/SDA/PB0
Datasheet