Eclipse+AVR plugin based workspace with Arduino_Mega_2560 configuration
This is the official repo for the APDuino Project's Arduino sources. For more information, visit the APDuino Project at http://apduino.org.
Pre-requisites:
- Arduino IDE 1.0 installed, USB communications to Arduino Mega 2560 established
- Eclipse + AVR plugin installed
- git or Eclipse egit plugin installed
- http://arduino.cc/en/Main/Software - download Arduino 1.0 (find it under the Previous IDE versions)
- http://www.arduino.cc/playground/code/eclipse
- http://www.baeyens.it/eclipse/ - AVR Plugin by Jantje
- http://www.baeyens.it/eclipse/Install.html - Eclipse+AVR plugin install guide by Jantje
- "If you would like to support Jantje; buy Jantje an Arduino.":http://www.baeyens.it/eclipse/donate.html
- http://git-scm.com/
- http://www.eclipse.org/egit/ - EGit plugin
- http://www.vogella.com/articles/EGit/article.html - a nice EGit tutorial
Normally the APDuino Project aims to provide a programming free experience (for ready-to-flash builds visit http://apduino.com/firmwares). However, if you need to build from sources (eg. trying to use hardware components not supported by the official APDuinOS releases), this repo is for you. (And 3 more, pulled in as submodules.)
There are two main methods to get & build the sources (once pre-requisites met):
mkdir ${WORKSPACE_DIR}
cd ${WORKSPACE_DIR}
# symlink or copy Arduino IDE files, choose between the following
ln -s [path to Arduino IDE 1.0] ./arduino # symlink Arduino IDE 1.0 to ${WORKSPACE_DIR}/arduino
cp -r [path to Arduino IDE 1.0] ./arduino # copy Arduino IDE 1.0 to ${WORKSPACE_DIR}/arduino
git clone https://github.com/srejbi/APDuinoProject-arduino.git
git submodule init
git submodule update
- switch to a new workspace
- import > Git > https://github.com/srejbi/APDuinoProject-arduino.git
- tick submodule import and project creation
Additional steps:
- In any case, configure AVR plugin (Preferences/Arduino) after, set the Arduino IDE location to '${WORKSPACE_DIR}/arduino' and Arduino libraries to '${WORKSPACE_DIR}/arduino/libraries'
- Also, select the 'Arduino Mega 2560 or Mega ADK'/'16000000' values on the Arduino project prefs of the 'arduino_headless' project in the workspace.
Build should work after.
A more detailed guide can be found here: http://apduino.org/projects/apduinos/wiki/Building_From_Sources