ipython_memwatcher

IPython tool to report memory usage deltas for every command you type. If you are running out of RAM then use this tool to understand what's happening. It also records the time spent running each command.

This tool helps you to figure out which commands use a lot of RAM and take a long time to run, this is very useful if you're working with large numpy matrices. In addition it reports the peak memory usage whilst a command is running which might be higher (due to temporary objects) than the final RAM usage. Built on @fabianp's memory_profiler.

As a simple example - make 10,000,000 random numbers, report that it costs 76MB of RAM and took 0.3 seconds to execute:

In [1]: import numpy as np

In [2]: from ipython_memwatcher import MemWatcher

In [3]: mw = MemWatcher()

In [4]: mw.start_watching_memory()
In [4] used 0.0156 MiB RAM in 2.77s, peaked 0.00 MiB above current, total RAM usage 36.27 MiB

In [5]: arr=np.random.uniform(size=1e7)
In [5] used 76.3320 MiB RAM in 0.33s, peaked 0.00 MiB above current, total RAM usage 112.60 MiB

And if we also want to have access to the measurements, just call the measurements property:

In [6]: mw.measurements
Out[6]: Measurements(memory_delta=76.33203125, time_delta=0.32660794258117676, memory_peak=0, memory_usage=112.59765625)
In [6] used 0.0664 MiB RAM in 0.10s, peaked 0.00 MiB above current, total RAM usage 112.66 MiB

Works with Python 2.7 and 3.4 or higher, and with IPython 3.0 and up.

Note: This work is strongly based on https://github.com/ianozsvald/ipython_memory_usage by Ian Ozsvald and adds basically a handier object interface and a .measurements property for getting access to the actualy memory values. In the future ipython_memwatcher can merged back into ipython_memory_usage.

Example usage

We can measure on every line how large array operations allocate and deallocate memory:

In [1]: import numpy as np

In [2]: from ipython_memwatcher import MemWatcher

In [3]: mw = MemWatcher()

In [4]: mw.start_watching_memory()
In [4] used 0.0156 MiB RAM in 5.24s, peaked 0.00 MiB above current, total RAM usage 36.20 MiB

In [5]: a = np.ones(1e7)
In [5] used 76.3320 MiB RAM in 0.13s, peaked 0.00 MiB above current, total RAM usage 112.53 MiB

In [6]: b = np.ones(1e7)
In [6] used 76.3203 MiB RAM in 0.12s, peaked 0.00 MiB above current, total RAM usage 188.85 MiB

In [7]: b = a * b
In [7] used 0.0859 MiB RAM in 0.14s, peaked 2.23 MiB above current, total RAM usage 188.93 MiB

In [8]: mw.measurements
Out[8]: Measurements(memory_delta=0.0859375, time_delta=0.1445159912109375, memory_peak=2.234375, memory_usage=188.93359375)
In [8] used 0.0703 MiB RAM in 0.10s, peaked 0.00 MiB above current, total RAM usage 189.00 MiB

You can use stop_watching_memory to stop watching and printing memory usage after each statement:

In [9]: mw.stop_watching_memory()
In [10]: b = a * b

In [11]:

Important RAM usage note

It is much easier to debug RAM situations with a fresh IPython shell. The longer you use your current shell, the more objects remain inside it and the more RAM the Operating System may have reserved. RAM is returned to the OS slowly, so you can end up with a large process with plenty of spare internal RAM (which will be allocated to your large objects), so this tool (via memory_profiler) reports 0MB RAM usage. If you get confused or don't trust the results, quit IPython and start a fresh shell, then run the fewest commands you need to understand how RAM is added to the process.

Requirements

memory_profiler https://github.com/fabianp/memory_profiler

Tested on

IPython 3.2 with Python 2.7 on Linux 64bit (2015-07)

IPython 7.2 with Python 3.7 on Mac OSX 64bit (2019-09)

License

FrancescAlted/ipython_memwatcher

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Uh oh!

Languages

Error
Looks like something went wrong!

Packages