sunxi-6.13: Add megous patches

patch/kernel/archive/sunxi-6.13/patches.megous/2-arm64-dts-sun50i-Define-orientation-and-rotation-for-PinePhone-.patch

@@ -0,0 +1,31 @@
+From 1499bb7def0445b47dd72cc26807e074bd297297 Mon Sep 17 00:00:00 2001
+From: Arnav Singh <me@arnavion.dev>
+Date: Mon, 6 May 2024 16:36:06 -0700
+Subject: arm64: dts: sun50i: Define orientation and rotation for PinePhone
+ front camera
+
+This enables libcamera to detect the correct orientation from
+the device tree and propagate it further to e.g. Pipewire.
+
+Signed-off-by: Arnav Singh <me@arnavion.dev>
+---
+ arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi | 3 +++
+ 1 file changed, 3 insertions(+)
+
+diff --git a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+index 1a57720c25ef..f0f1367c5868 100644
+--- a/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
++++ b/arch/arm64/boot/dts/allwinner/sun50i-a64-pinephone.dtsi
+@@ -593,6 +593,9 @@ gc2145: front-camera@3c {
+ 		reset-gpios = <&pio 4 16 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; /* PE16 */
+ 		enable-gpios = <&pio 4 17 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>; /* PE17 */
+
++		orientation = <0>;
++		rotation = <90>;
++
+ 		port {
+ 			gc2145_ep: endpoint {
+ 				remote-endpoint = <&csi_gc2145_ep>;
+-- 
+2.35.3
+

patch/kernel/archive/sunxi-6.13/patches.megous/ARM-dts-axp813-Add-charger-LED.patch

@@ -0,0 +1,30 @@
+From 793f4b1787580b995db295e6d4f30bc2512489df Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= <megi@xff.cz>
+Date: Tue, 14 Nov 2017 02:47:51 +0100
+Subject: ARM: dts: axp813: Add charger LED
+
+PMIC supports charging status indication via a LED. Add support
+for it.
+
+Signed-off-by: Ondrej Jirman <megi@xff.cz>
+---
+ arch/arm/boot/dts/allwinner/axp81x.dtsi | 5 +++++
+ 1 file changed, 5 insertions(+)
+
+diff --git a/arch/arm/boot/dts/allwinner/axp81x.dtsi b/arch/arm/boot/dts/allwinner/axp81x.dtsi
+index ebaf1c3ce8db..a4b1be159b02 100644
+--- a/arch/arm/boot/dts/allwinner/axp81x.dtsi
++++ b/arch/arm/boot/dts/allwinner/axp81x.dtsi
+@@ -161,4 +161,9 @@ reg_drivevbus: drivevbus {
+ 	usb_power_supply: usb-power {
+ 		compatible = "x-powers,axp813-usb-power-supply";
+ 	};
++
++	charger_led: charger-led {
++		compatible = "x-powers,axp813-charger-led";
++		status = "disabled";
++	};
+ };
+-- 
+2.35.3
+

patch/kernel/archive/sunxi-6.13/patches.megous/ARM-dts-sun5i-Add-PocketBook-Touch-Lux-3-display-ctp-support.patch

@@ -0,0 +1,185 @@
+From b1060cbbb7c823fdd2aef80634681b5e44c8e844 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= <megi@xff.cz>
+Date: Sun, 23 Feb 2020 01:23:10 +0100
+Subject: ARM: dts: sun5i: Add PocketBook Touch Lux 3 display/ctp support
+
+Add support for display and touchscreen via out-of-tree drivers.
+
+Signed-off-by: Ondrej Jirman <megi@xff.cz>
+---
+ .../sun5i-a13-pocketbook-touch-lux-3.dts      | 105 +++++++++++++++++-
+ 1 file changed, 103 insertions(+), 2 deletions(-)
+
+diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
+index d60407772e5d..db28ab621804 100644
+--- a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
++++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
+@@ -62,6 +62,11 @@ key-left {
+ 		};
+ 	};
+
++	regulator-eink {
++		compatible = "custom,reg-userspace-consumer";
++		controlled-supply = <&tp65185x>;
++	};
++
+ 	reg_1v8: regulator-1v8 {
+ 		compatible = "regulator-fixed";
+ 		regulator-name = "vdd-1v8-nor-ctp";
+@@ -79,7 +84,6 @@ reg_1v8_nor: regulator-nor {
+ 		gpio = <&pio 2 14 GPIO_ACTIVE_HIGH>;
+ 		enable-active-high;
+ 		vin-supply = <&reg_1v8>;
+-		regulator-always-on;
+ 	};
+
+ 	reg_1v8_ctp: regulator-ctp {
+@@ -112,6 +116,7 @@ &ehci0 {
+
+ &i2c0 {
+ 	status = "okay";
++	//XXX: bsp has pullup on PB0/PB1 pins enabled, but it works without it
+
+ 	axp209: pmic@34 {
+ 		reg = <0x34>;
+@@ -128,12 +133,42 @@ pcf8563: rtc@51 {
+ 		compatible = "nxp,pcf8563";
+ 		reg = <0x51>;
+ 	};
++
++	// hacky PMIC driver for eInk display
++	tp65185x: regulator@68 {
++		compatible = "tp,tp65185x";
++		reg = <0x68>;
++
++		regulator-min-microvolt = <3120000>;
++		regulator-max-microvolt = <3120000>;
++		regulator-name = "eink-vcom";
++
++		//XXX: we don't use interrupts in the driver right now
++		//interrupt-parent = <&pio>;
++		//interrupts = <1 10 IRQ_TYPE_LEVEL_LOW>; /* PB10 */
++
++		wakeup-gpios = <&pio 3 18 GPIO_ACTIVE_HIGH>; /* PD18 */
++		powerup-gpios = <&pio 4 7 GPIO_ACTIVE_HIGH>; /* PE7 */
++		vcom-gpios = <&pio 3 19 GPIO_ACTIVE_HIGH>; /* PD19 */
++		//XXX: not a pullup on BSP (might have an external resistor)
++		powergood-gpios = <&pio 4 6 (GPIO_ACTIVE_HIGH | GPIO_PULL_UP)>; /* PE6 */
++	};
+ };
+
+ &i2c2 {
+ 	status = "okay";
+
+-	/* Touchpanel is connected here. */
++	touchpanel@24 {
++		compatible = "cypress,cyttsp4_i2c_adapter";
++		reg = <0x24>;
++
++		interrupt-parent = <&pio>;
++		interrupts = <6 11 IRQ_TYPE_EDGE_FALLING>; /* PG11 */
++
++		vdd-supply = <&reg_1v8_ctp>;
++		power-gpios = <&pio 4 5 GPIO_ACTIVE_LOW>; /* PE5 */
++		reset-gpios = <&pio 1 3 GPIO_ACTIVE_LOW>; /* PB3 */
++	};
+ };
+
+ &lradc {
+@@ -179,6 +214,20 @@ &otg_sram {
+ 	status = "okay";
+ };
+
++&pio {
++	eink_pins_active: eink-pins-lcd {
++		pins = "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12",
++			"PD13", "PD15", "PD20", "PD21", "PD22", "PD23", "PD24";
++		function = "lcd0";
++	};
++
++	eink_pins_idle: eink-pins-gpio {
++		pins = "PD3", "PD4", "PD5", "PD6", "PD7", "PD10", "PD11", "PD12",
++			"PD13", "PD15", "PD20", "PD21", "PD22", "PD23", "PD24";
++		function = "gpio_out";
++	};
++};
++
+ &pwm {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&pwm0_pin>;
+@@ -219,6 +268,55 @@ &reg_ldo3 {
+ 	regulator-ramp-delay = <1600>;
+ };
+
++&soc {
++	display-controller@1c0c000 {
++		pinctrl-names = "idle", "active";
++		pinctrl-0 = <&eink_pins_idle>;
++		pinctrl-1 = <&eink_pins_active>;
++
++		all-gpios = <&pio 3 3 GPIO_ACTIVE_HIGH>,
++			<&pio 3 4 GPIO_ACTIVE_HIGH>,
++			<&pio 3 5 GPIO_ACTIVE_HIGH>,
++			<&pio 3 6 GPIO_ACTIVE_HIGH>,
++			<&pio 3 7 GPIO_ACTIVE_HIGH>,
++			<&pio 3 10 GPIO_ACTIVE_HIGH>,
++			<&pio 3 11 GPIO_ACTIVE_HIGH>,
++			<&pio 3 12 GPIO_ACTIVE_HIGH>,
++			<&pio 3 13 GPIO_ACTIVE_HIGH>,
++			<&pio 3 15 GPIO_ACTIVE_HIGH>,
++			<&pio 3 20 GPIO_ACTIVE_HIGH>,
++			<&pio 3 21 GPIO_ACTIVE_HIGH>,
++			<&pio 3 22 GPIO_ACTIVE_HIGH>,
++			<&pio 3 23 GPIO_ACTIVE_HIGH>,
++			<&pio 3 24 GPIO_ACTIVE_HIGH>;
++
++		compatible = "custom,pocketbook-touch-lux-3-tcon0-ed060xd4-display";
++		reg = <0x01c0c000 0x1000>, // TCON0 regs
++			<0x01e60000 0x10000>; // DEBE regs
++
++		interrupts = <44>; // TCON interrupt
++
++		resets = <&ccu RST_LCD>, <&ccu RST_DE_BE>;
++		reset-names = "tcon", "be";
++
++		clocks = <&ccu CLK_AHB_LCD>, <&ccu CLK_TCON_CH0>,
++			 <&ccu CLK_AHB_DE_BE>, <&ccu CLK_DE_BE>,
++			 <&ccu CLK_DRAM_DE_BE>;
++		clock-names = "tcon_bus", "tcon_mod",
++			      "be_bus", "be_mod",
++			      "be_ram";
++
++		assigned-clocks = <&ccu CLK_DE_BE>;
++		assigned-clock-rates = <300000000>;
++
++		interconnects = <&mbus 18>;
++		interconnect-names = "dma-mem";
++
++		panel-supply = <&tp65185x>;
++		control-device-name = "eink-panel";
++	};
++};
++
+ &spi2 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&spi2_pe_pins>, <&spi2_cs0_pe_pin>;
+@@ -230,6 +328,7 @@ epd_flash: flash@0 {
+ 		compatible = "macronix,mx25u4033", "jedec,spi-nor";
+ 		reg = <0>;
+ 		spi-max-frequency = <4000000>;
++		vdd-supply = <&reg_1v8_nor>;
+ 	};
+ };
+
+@@ -253,6 +352,8 @@ &usb_power_supply {
+ };
+
+ &usbphy {
++	//XXX: might not work, need to test
++	usb0_vbus_det-gpios = <&pio 6 1 GPIO_ACTIVE_HIGH>; /* PG1 */
+ 	usb1_vbus-supply = <&reg_ldo3>;
+ 	status = "okay";
+ };
+-- 
+2.35.3
+

patch/kernel/archive/sunxi-6.13/patches.megous/ARM-dts-sun5i-Add-soc-handle.patch

@@ -0,0 +1,26 @@
+From 59b4c0d98f6382ae86441d92972d08f1eea28d51 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= <megi@xff.cz>
+Date: Sat, 5 Oct 2019 15:04:43 +0200
+Subject: ARM: dts: sun5i: Add soc handle
+
+Signed-off-by: Ondrej Jirman <megi@xff.cz>
+---
+ arch/arm/boot/dts/allwinner/sun5i.dtsi | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/arch/arm/boot/dts/allwinner/sun5i.dtsi b/arch/arm/boot/dts/allwinner/sun5i.dtsi
+index e6836fd4b8dc..126b80f3ca70 100644
+--- a/arch/arm/boot/dts/allwinner/sun5i.dtsi
++++ b/arch/arm/boot/dts/allwinner/sun5i.dtsi
+@@ -123,7 +123,7 @@ default-pool {
+ 		};
+ 	};
+
+-	soc {
++	soc: soc {
+ 		compatible = "simple-bus";
+ 		#address-cells = <1>;
+ 		#size-cells = <1>;
+-- 
+2.35.3
+

patch/kernel/archive/sunxi-6.13/patches.megous/ARM-dts-sun5i-a13-pocketbook-touch-lux-3-Add-RTC-clock-cells.patch

@@ -0,0 +1,27 @@
+From 0e1e0788c071cc4d19af872b3798353fc65fdb41 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= <megi@xff.cz>
+Date: Thu, 25 Jun 2020 01:57:27 +0200
+Subject: ARM: dts: sun5i-a13-pocketbook-touch-lux-3: Add RTC clock-cells
+
+This stop the driver from complaining in dmesg.
+
+Signed-off-by: Ondrej Jirman <megi@xff.cz>
+---
+ arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
+index db28ab621804..ee81db68e546 100644
+--- a/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
++++ b/arch/arm/boot/dts/allwinner/sun5i-a13-pocketbook-touch-lux-3.dts
+@@ -132,6 +132,7 @@ &i2c1 {
+ 	pcf8563: rtc@51 {
+ 		compatible = "nxp,pcf8563";
+ 		reg = <0x51>;
++		#clock-cells = <0>;
+ 	};
+
+ 	// hacky PMIC driver for eInk display
+-- 
+2.35.3
+

patch/kernel/archive/sunxi-6.13/patches.megous/ARM-dts-sun8i-a83t-Add-MBUS-node.patch

@@ -0,0 +1,39 @@
+From 91273df18b02bbb6f1f4edc4193de1a3177ce9aa Mon Sep 17 00:00:00 2001
+From: Samuel Holland <samuel@sholland.org>
+Date: Sat, 3 Apr 2021 20:53:26 -0500
+Subject: ARM: dts: sun8i: a83t: Add MBUS node
+
+Signed-off-by: Samuel Holland <samuel@sholland.org>
+---
+ arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi | 15 +++++++++++++++
+ 1 file changed, 15 insertions(+)
+
+diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
+index ef62ced26684..04b33b42b414 100644
+--- a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
++++ b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
+@@ -1056,6 +1056,21 @@ mdio: mdio {
+ 			};
+ 		};
+
++		mbus: dram-controller@1c62000 {
++			compatible = "allwinner,sun8i-a83t-mbus";
++			reg = <0x01c62000 0x1000>,
++			      <0x01c63000 0x1000>;
++			reg-names = "mbus", "dram";
++			clocks = <&ccu CLK_BUS_DRAM>,
++				 <&ccu CLK_DRAM>,
++				 <&ccu CLK_MBUS>;
++			clock-names = "apb", "dram", "mbus";
++			#address-cells = <1>;
++			#size-cells = <1>;
++			dma-ranges = <0x00000000 0x40000000 0xc0000000>;
++			#interconnect-cells = <1>;
++		};
++
+ 		gic: interrupt-controller@1c81000 {
+ 			compatible = "arm,gic-400";
+ 			reg = <0x01c81000 0x1000>,
+-- 
+2.35.3
+

patch/kernel/archive/sunxi-6.13/patches.megous/ARM-dts-sun8i-a83t-Add-cedrus-video-codec-support-to-A83T-untes.patch

@@ -0,0 +1,37 @@
+From b0ad8691cd5525985ab250244bf51d604b4fff13 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Ond=C5=99ej=20Jirman?= <megi@xff.cz>
+Date: Mon, 9 Sep 2019 06:02:10 +0200
+Subject: ARM: dts: sun8i-a83t: Add cedrus video codec support to A83T
+ [untested]
+
+Not tested at all.
+
+Signed-off-by: Ondrej Jirman <megi@xff.cz>
+---
+ arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi | 10 ++++++++++
+ 1 file changed, 10 insertions(+)
+
+diff --git a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
+index addf0cb0f465..ed3d8e692d84 100644
+--- a/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
++++ b/arch/arm/boot/dts/allwinner/sun8i-a83t.dtsi
+@@ -441,6 +441,16 @@ syscon: syscon@1c00000 {
+ 			reg = <0x01c00000 0x1000>;
+ 		};
+
++		video-codec@01c0e000 {
++			compatible = "allwinner,sun8i-a83t-video-engine";
++			reg = <0x01c0e000 0x1000>;
++			clocks = <&ccu CLK_BUS_VE>, <&ccu CLK_VE>,
++				 <&ccu CLK_DRAM_VE>;
++			clock-names = "ahb", "mod", "ram";
++			resets = <&ccu RST_BUS_VE>;
++			interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>;
++		};
++
+ 		dma: dma-controller@1c02000 {
+ 			compatible = "allwinner,sun8i-a83t-dma";
+ 			reg = <0x01c02000 0x1000>;
+-- 
+2.35.3
+