wdio.conf-crossbrowsertesting.js

exports.config = {
	//
	// ====================
	// Runner Configuration
	// ====================
	//
	//
	// =====================
	// Server Configurations
	// =====================
	// Host address of the running Selenium server. This information is usually obsolete as
	// WebdriverIO automatically connects to localhost. Also, if you are using one of the
	// supported cloud services like Sauce Labs, Browserstack, Testing Bot or LambdaTest you don't
	// need to define host and port information because WebdriverIO can figure that out
	// according to your user and key information. However, if you are using a private Selenium
	// backend you should define the host address, port, and path here.
	//
	hostname: 'hub.crossbrowsertesting.com',
	port: 80,
	path: '/wd/hub',
	//
	// =================
	// Service Providers
	// =================
	// WebdriverIO supports Sauce Labs, Browserstack, Testing Bot and LambdaTest (other cloud providers
	// should work too though). These services define specific user and key (or access key)
	// values you need to put in here in order to connect to these services.
	//
	user: process.env.XBROWSERTESTING_USERNAME,
	key: process.env.XBROWSERTESTING_ACCESS_KEY,
	//
	// If you run your tests on Sauce Labs you can specify the region you want to run your tests
	// in via the `region` property. Available short handles for regions are `us` (default), `eu` and `apac`.
	// These regions are used for the Sauce Labs VM cloud and the Sauce Labs Real Device Cloud.
	// If you don't provide the region it will default for the `us`

	//
	// ==================
	// Specify Test Files
	// ==================
	// Define which test specs should run. The pattern is relative to the directory
	// from which `wdio` was called.
	//
	// The specs are defined as an array of spec files (optionally using wildcards
	// that will be expanded). The test for each spec file will be run in a separate
	// worker process. In order to have a group of spec files run in the same worker
	// process simply enclose them in an array within the specs array.
	//
	// If you are calling `wdio` from an NPM script (see https://docs.npmjs.com/cli/run-script),
	// then the current working directory is where your `package.json` resides, so `wdio`
	// will be called from there.
	//
	specs: ['./webdriverio-tests/basic.js'],
	// Patterns to exclude.
	exclude: [
		// 'path/to/excluded/files'
	],
	//
	// ============
	// Capabilities
	// ============
	// Define your capabilities here. WebdriverIO can run multiple capabilities at the same
	// time. Depending on the number of capabilities, WebdriverIO launches several test
	// sessions. Within your capabilities you can overwrite the spec and exclude options in
	// order to group specific specs to a specific capability.
	//
	// First, you can define how many instances should be started at the same time. Let's
	// say you have 3 different capabilities (Chrome, Firefox, and Safari) and you have
	// set maxInstances to 1; wdio will spawn 3 processes. Therefore, if you have 10 spec
	// files and you set maxInstances to 10, all spec files will get tested at the same time
	// and 30 processes will get spawned. The property handles how many capabilities
	// from the same test should run tests.
	//
	maxInstances: 5,
	//
	// If you have trouble getting all important capabilities together, check out the
	// Sauce Labs platform configurator - a great tool to configure your capabilities:
	// https://saucelabs.com/platform/platform-configurator
	//
	capabilities: [
		// Configuration maxInstances can get overwritten per capability. So if you have an in-house Selenium
		// grid with only 5 firefox instances available you can make sure that not more than
		// 5 instances get started at a time.
		//
		// If outputDir is provided WebdriverIO can capture driver session logs
		// it is possible to configure which logTypes to include/exclude.
		// excludeDriverLogs: ['*'], // pass '*' to exclude all driver session logs
		// excludeDriverLogs: ['bugreport', 'server'],

		// https://support.smartbear.com/crossbrowsertesting/docs/automated-testing/automation-capabilities.html

		{
			browserName: 'chrome',
			platform: 'macOS',
			version: 'latest',
			maxInstances: 1,
		},
		{
			browserName: 'chrome',
			platform: 'Win10',
			version: 'latest',
			maxInstances: 1,
		},
		{
			browserName: 'chrome',
			platform: 'Win10',
			version: 'latest-1',
			maxInstances: 5,
		},
		{
			browserName: 'Firefox',
			platform: 'Win10',
			version: 'latest',
			maxInstances: 5,
		},
		{
			browserName: 'firefox',
			platform: 'Win10',
			version: 'latest-1',
			maxInstances: 5,
		},
		{
			browserName: 'edge',
			platform: 'Win10',
			version: '18',
			maxInstances: 5,
		},
		{
			browserName: 'MicrosoftEdge',
			platform: 'Win10',
			version: '17',
			maxInstances: 5,
		},
		{
			browserName: 'Internet Explorer',
			platform: 'Win10',
			version: '11',
			maxInstances: 5,
		},
		{
			browserName: 'Internet Explorer',
			platform: 'Windows 7',
			version: '9',
			maxInstances: 5,
		},
		{
			browserName: 'Safari',
			platform: 'MacOS 11.0',
			version: '14',
			maxInstances: 1,
		},
		{
			browserName: 'Safari',
			platform: 'Mac OSX 10.13',
			version: '11',
			maxInstances: 1,
		},
		{
			browserName: 'Safari',
			deviceName: 'iPad Pro Simulator',
			platformVersion: '11.0',
			platform: 'iOS',
			deviceOrientation: 'landscape',
			maxInstances: 5,
		},
	],
	//
	// ===================
	// Test Configurations
	// ===================
	// Define all options that are relevant for the WebdriverIO instance here
	//
	// Level of logging verbosity: trace | debug | info | warn | error | silent
	logLevel: 'error',
	//
	// Set specific log levels per logger
	// loggers:
	// - webdriver, webdriverio
	// - @wdio/browserstack-service, @wdio/devtools-service, @wdio/sauce-service
	// - @wdio/mocha-framework, @wdio/jasmine-framework
	// - @wdio/local-runner
	// - @wdio/sumologic-reporter
	// - @wdio/cli, @wdio/config, @wdio/utils
	// Level of logging verbosity: trace | debug | info | warn | error | silent
	// logLevels: {
	//     webdriver: 'info',
	//     '@wdio/appium-service': 'info'
	// },
	//
	// If you only want to run your tests until a specific amount of tests have failed use
	// bail (default is 0 - don't bail, run all tests).
	bail: 0,
	//
	// Set a base URL in order to shorten url command calls. If your `url` parameter starts
	// with `/`, the base url gets prepended, not including the path portion of your baseUrl.
	// If your `url` parameter starts without a scheme or `/` (like `some/path`), the base url
	// gets prepended directly.
	baseUrl: 'https://mfranzke.github.io/loading-attribute-polyfill/demo/',
	//
	// Default timeout for all waitFor* commands.
	waitforTimeout: 10000,
	//
	// Default timeout in milliseconds for request
	// if browser driver or grid doesn't send response
	connectionRetryTimeout: 120000,
	//
	// Default request retries count
	connectionRetryCount: 3,
	//
	// Test runner services
	// Services take over a specific job you don't want to take care of. They enhance
	// your test setup with almost no effort. Unlike plugins, they don't add new
	// commands. Instead, they hook themselves up into the test process.
	services: [],
	// Framework you want to run your specs with.
	// The following are supported: Mocha, Jasmine, and Cucumber
	// see also: https://webdriver.io/docs/frameworks
	//
	// Make sure you have the wdio adapter package for the specific framework installed
	// before running any tests.
	framework: 'mocha',
	//
	// The number of times to retry the entire specfile when it fails as a whole
	// specFileRetries: 1,
	//
	// Delay in seconds between the spec file retry attempts
	// specFileRetriesDelay: 0,
	//
	// Whether or not retried specfiles should be retried immediately or deferred to the end of the queue
	// specFileRetriesDeferred: false,
	//
	// Test reporter for stdout.
	// The only one supported by default is 'dot'
	// see also: https://webdriver.io/docs/dot-reporter
	reporters: ['dot'],

	//
	// Options to be passed to Mocha.
	// See the full list at http://mochajs.org/
	mochaOpts: {
		ui: 'bdd',
		timeout: 60000,
	},
	//
	// =====
	// Hooks
	// =====
	// WebdriverIO provides several hooks you can use to interfere with the test process in order to enhance
	// it and to build services around it. You can either apply a single function or an array of
	// methods to it. If one of them returns with a promise, WebdriverIO will wait until that promise got
	// resolved to continue.
	/**
	 * Gets executed once before all workers get launched.
	 * @param {Object} config wdio configuration object
	 * @param {Array.<Object>} capabilities list of capabilities details
	 */
	// onPrepare: function (config, capabilities) {
	// },
	/**
	 * Gets executed before a worker process is spawned and can be used to initialise specific service
	 * for that worker as well as modify runtime environments in an async fashion.
	 * @param  {String} cid      capability id (e.g 0-0)
	 * @param  {[type]} caps     object containing capabilities for session that will be spawn in the worker
	 * @param  {[type]} specs    specs to be run in the worker process
	 * @param  {[type]} args     object that will be merged with the main configuration once worker is initialised
	 * @param  {[type]} execArgv list of string arguments passed to the worker process
	 */
	// onWorkerStart: function (cid, caps, specs, args, execArgv) {
	// },
	/**
	 * Gets executed just before initialising the webdriver session and test framework. It allows you
	 * to manipulate configurations depending on the capability or spec.
	 * @param {Object} config wdio configuration object
	 * @param {Array.<Object>} capabilities list of capabilities details
	 * @param {Array.<String>} specs List of spec file paths that are to be run
	 * @param {String} cid worker id (e.g. 0-0)
	 */
	// beforeSession: function (config, capabilities, specs, cid) {
	// },
	/**
	 * Gets executed before test execution begins. At this point you can access to all global
	 * variables like `browser`. It is the perfect place to define custom commands.
	 * @param {Array.<Object>} capabilities list of capabilities details
	 * @param {Array.<String>} specs        List of spec file paths that are to be run
	 * @param {Object}         browser      instance of created browser/device session
	 */
	// before: function (capabilities, specs) {
	// },
	/**
	 * Runs before a WebdriverIO command gets executed.
	 * @param {String} commandName hook command name
	 * @param {Array} args arguments that command would receive
	 */
	// beforeCommand: function (commandName, args) {
	// },
	/**
	 * Hook that gets executed before the suite starts
	 * @param {Object} suite suite details
	 */
	// beforeSuite: function (suite) {
	// },
	/**
	 * Function to be executed before a test (in Mocha/Jasmine) starts.
	 */
	// beforeTest: function (test, context) {
	// },
	/**
	 * Hook that gets executed _before_ a hook within the suite starts (e.g. runs before calling
	 * beforeEach in Mocha)
	 */
	// beforeHook: function (test, context) {
	// },
	/**
	 * Hook that gets executed _after_ a hook within the suite starts (e.g. runs after calling
	 * afterEach in Mocha)
	 */
	// afterHook: function (test, context, { error, result, duration, passed, retries }) {
	// },
	/**
	 * Function to be executed after a test (in Mocha/Jasmine only)
	 * @param {Object}  test             test object
	 * @param {Object}  context          scope object the test was executed with
	 * @param {Error}   result.error     error object in case the test fails, otherwise `undefined`
	 * @param {Any}     result.result    return object of test function
	 * @param {Number}  result.duration  duration of test
	 * @param {Boolean} result.passed    true if test has passed, otherwise false
	 * @param {Object}  result.retries   informations to spec related retries, e.g. `{ attempts: 0, limit: 0 }`
	 */
	// afterTest: function(test, context, { error, result, duration, passed, retries }) {
	// },

	/**
	 * Hook that gets executed after the suite has ended
	 * @param {Object} suite suite details
	 */
	// afterSuite: function (suite) {
	// },
	/**
	 * Runs after a WebdriverIO command gets executed
	 * @param {String} commandName hook command name
	 * @param {Array} args arguments that command would receive
	 * @param {Number} result 0 - command success, 1 - command error
	 * @param {Object} error error object if any
	 */
	// afterCommand: function (commandName, args, result, error) {
	// },
	/**
	 * Gets executed after all tests are done. You still have access to all global variables from
	 * the test.
	 * @param {Number} result 0 - test pass, 1 - test fail
	 * @param {Array.<Object>} capabilities list of capabilities details
	 * @param {Array.<String>} specs List of spec file paths that ran
	 */
	// after: function (result, capabilities, specs) {
	// },
	/**
	 * Gets executed right after terminating the webdriver session.
	 * @param {Object} config wdio configuration object
	 * @param {Array.<Object>} capabilities list of capabilities details
	 * @param {Array.<String>} specs List of spec file paths that ran
	 */
	// afterSession: function (config, capabilities, specs) {
	// },
	/**
	 * Gets executed after all workers got shut down and the process is about to exit. An error
	 * thrown in the onComplete hook will result in the test run failing.
	 * @param {Object} exitCode 0 - success, 1 - fail
	 * @param {Object} config wdio configuration object
	 * @param {Array.<Object>} capabilities list of capabilities details
	 * @param {<Object>} results object containing test results
	 */
	// onComplete: function(exitCode, config, capabilities, results) {
	// },
	/**
	 * Gets executed when a refresh happens.
	 * @param {String} oldSessionId session ID of the old session
	 * @param {String} newSessionId session ID of the new session
	 */
	//onReload: function(oldSessionId, newSessionId) {
	//}
};