babun-docker

🚨 DEPRECATED 🚨

If you are developing in Windows you will have a much better time using Docker for Windows and developing with WSL (Windows Subsystem for Linux) than using Babun and connecting it to Docker Toolbox. You probably shouldn't use this tool. It's here only for posterity.

Description

Program / fix to allow using Docker Toolbox from Babun or Cygwin in Windows.

If you are using Cygwin, you should be using Babun. It's an improved Cygwin. Nevertheless, the latest versions of babun-docker work in Cygwin too.

This program installs winpty, sets the environment variables and creates a function to embed docker, and to allow non-tty connections.

This allows running commands that "enter" in the container, as for example those that use -it and end in bash:

docker run -it -v $(pwd):/var/www debian bash

It also checks if the default docker-machine (the Virtual Machine) is running, if not, it tries to start it and set the environment to use it.

And it also sets up shared folders in VirtualBox for each drive in your Windows (although you can configure which drives to use if you want) and mounts them inside the virtual machine (docker-machine), to allow using volumes with Docker (from any drive in your Windows, which is even more than what comes by default with the Docker Toolbox) to allow using commands like:

docker run -d -v $(pwd):/var/www ubuntu ping google.com

The shared folders (drives) inside the docker-machine (VirtualBox virtual machine) are mounted in two different directories to make it compatible with docker and docker-compose, so you can use normal relative volumes with docker-compose. You only have to make sure you run a normal docker command first to start and set up everything. For example:

docker ps

Note: After installing babun-docker (this program), you don't have to "use" another program. You can keep using the docker commands as normal. And after running a first docker command, you can use docker-compose as you would normally too.

Installation

Install Docker Toolbox.
Run the bundled Docker Quickstart Terminal that comes with Docker Toolbox to make sure everything is working.
Turn off the Docker Toolbox Virtual Machine: run docker-machine stop default (or turn off the Virtual Machine default in VirtualBox) so that babun-docker can do all the needed automatic configurations with the VM turned off.
Install Babun and start a terminal.
Run the following command:

curl -s https://raw.githubusercontent.com/tiangolo/babun-docker/master/setup.sh | source /dev/stdin

To be able to use babun-docker right away without having to close and open Babun run the update:

babun-docker-update

From Babun, use Docker as you would normally, for example: docker ps.

It will take care of configuring the virtual machine, turning it on, sharing volumes, allowing non-tty commands, etc. Whenever it does something for you (automatically) you will see an output like: -- babun-docker: doing something.

Note: the installation command will get a script from this repository and run it immediately, performing all the needed steps to install everything (the same steps described in "Manual installation"). If you don't want to run it, you can do a manual installation.

Installing docker-babun in Cygwin

If you definitively don't want to use Babun, you can install docker-babun in Cygwin (nevertheless, I highly recommend you Babun).

First you will need to have installed the following packages (installed by default in Babun):

curl
wget
git

Then you can run the same command as above.

Updating

To update babun-docker, after following the installation instructions, run the command:

babun-docker-update

Note: if you want to receive email notifications when babun-docker is updated you can "star" this repository (the star button above) and login with GitHub to Sibbell, it will send you notifications automatically with new releases.

Turning off

As Docker Toolbox runs in a virtual machine, it uses docker-machine to comunicate and configure it. If you want to turn the virtual machine off, run:

docker-machine stop $babun_docker_machine_name

Release Notes

Latest changes

Fix new line CR (Windows style) in setup. PR #37 by @marcelotaube.
Fix typo in docs. PR #38 by @Jason-Cooke.

2018-04-27:

Updates (winpty) and bug fixes. See PR 34 by murray02.

The return code is now preserved. See PR 31 by ptisserand.

2016-11-09:

Now the shared folders are mounted in two directories inside the VirtualBox virtual machine to make it compatible with docker-compose.

You can start and set up babun-docker and all the shared folders with any docker command, as:

docker ps

And have a docker-compose.yml file with:

version: '2'
services:
  server:
    build: ./server
    volumes:
      - ./server/app:/app
    ports:
      - 8081:80

...note the relative mounted volume in ./server/app:/app.

And then bring up your stack with:

docker-compose up -d

and it will work (because the shared folder paths that docker-compose uses are also mounted in the virtual machine).

2016-08-17:

Fix for the command docker login, see PR 24 by jpraet.

2016-07-05:

Make winpty download file explicit, see PR 23 by murrayju.
Use the latest version of Winpty (0.4.0).

2016-06-22:

Fix for Docker Beta for Windows, see PR #21 by @ronnypolley.

2016-04-21:

Now you can run babun-docker in Cygwin (but I still recommend Babun).

2016-04-20:

Update winpty to latest version (and make old winpty installs to auto-update).
Now you can use Bash instead of Zsh.

2016-04-19:

You can configure the VirtualBox installation path with the variable babun_docker_virtualbox_bin. Read more in the Configurations section below.

2016-04-14:

You can define which specific Windows drives to mount with the variable babun_docker_volumes (by default babun-docker tries to mount them all). Read more in the Configurations section below.
You can use a separate file in ~/.babun-docker/custom-config.sh for custom configurations. Read more in the Configurations section below.
Improved mounted volumes and ownership (with hints by @olegweb ).

2016-03-16:

Support for Docker v1.10 (see PR #9 by @mrkschan ).

2015-11-12:

babun-docker automatically sets up shared folders in your VirtualBox virtual machine (docker-machine) for each of your Windows drives and mounts them inside the virtual machine, to allow using volumes (from any drive in your Windows, which is even more than what comes by default with the Docker Toolbox) with commands like:

docker run -it -v $(pwd):/var/www debian bash

You can configure if you want babun-docker to automatically set up VirtualBox shared folders and volumes with the environment variable babun_docker_setup_volumes. Set it to "0" if you want to disable that. Read more in the Configurations section below.
You can now specify the name of the docker-machine to use with the environment variable babun_docker_machine_name, which is set by default to the "default" machine (named "default"). (No pun / tongue twister intended). Set that environment variable to the name of the machine that you want to use (e.g. babun_docker_machine_name='dev'). Read more in the Configurations section below.

2015-10-21:

The installation of babun-docker clones the repository and sets up the environment to use the scripts inside it instead of writing it all to the ~/.zshrc file.
Running babun-docker-update will update that repository (will update babun-docker) and set up the environment again.

Docker Volumes with Babun

Here is an explanation of how volumes work in Docker and how they work in the Toolbox Virtual Machine: Docker Volumes with Babun.

That's what allows using commands like:

docker run -it -v $(pwd):/var/www debian bash

But all that is implemented automatically in the newest version of babun-docker.

Manual installation

Go to your home directory:

cd

clone this repo in the specific directory, like:

git clone https://github.com/tiangolo/babun-docker.git ./.babun-docker

Enter that directory:

cd ./.babun-docker

Source the setup:

source ./setup.sh

The setup will:

Download and install Winpty to allow using Docker commands that enter a container
Create a command (function) to update babun-docker, with babun-docker-update
Add itself to the ~/.zshrc file to run at startup
Run (source) the script to fix Docker, wrapping it

The wrapper script (function) will try to call docker, if it fails, it will check what was the failure, try to fix it and run again.

The wrapper / fix will:

auto-start the default docker machine
set the environment variables for that default docker-machine
use winpty (console) to connect to a tty session to avoid errors, as in:

docker exec -it my_container bash

Configurations

After installing babun-docker, you can configure things with environment variables in the file ~/.babun-docker/custom-config.sh.

If you want to specify which drives should be used for the setup of VirtualBox shared folders and volumes inside your docker-machine virtual machine set the environment variable babun_docker_volumes to a list of the drive names separated by spaces, as in "c d". For example:

echo 'babun_docker_volumes="c d"' >> ~/.babun-docker/custom-config.sh
source ~/.babun-docker/*config.sh

If you want to disable the setup of VirtualBox shared folders and volumes inside your docker-machine virtual machine set the environment variable babun_docker_setup_volumes to "0". For example:

echo babun_docker_setup_volumes=0 >> ~/.babun-docker/custom-config.sh
source ~/.babun-docker/*config.sh

If you want to change the virtual machine to use (if you have configured another virtual machine with docker-machine) you can set the environment variable babun_docker_machine_name to the name of your new virtual machine. For example:

echo babun_docker_machine_name='dev' >> ~/.babun-docker/custom-config.sh
source ~/.babun-docker/*config.sh

If you have VirtualBox installed in a different location (it would be uncommon) you could set the path with the variable babun_docker_virtualbox_bin, you would have to use Cygwin (Babun) paths, you can use cygpath to convert between Windows and Cygwin paths. It should point to the program "VBoxManage". For example:

echo "babun_docker_virtualbox_bin='$(cygpath -u 'C:\Program Files\Oracle\VirtualBox\VBoxManage')'" >> ~/.babun-docker/custom-config.sh
source ~/.babun-docker/*config.sh

License

This project is licensed under the terms of the MIT license.

License

tiangolo/babun-docker

ErrorLooks like something went wrong!

About

Topics

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases 6

Packages 0

Uh oh!

Contributors 11

Uh oh!

Languages

Error
Looks like something went wrong!

Packages