Miniforge

This repository holds the minimal installers for Conda and Mamba specific to conda-forge, with the following features pre-configured:

Packages in the base environment are obtained from the conda-forge channel.
The conda-forge channel is set as the default (and only) channel.

We put an emphasis on supporting various CPU architectures (x86_64, ppc64le, and aarch64 including Apple Silicon). Optional support for PyPy in place of standard Python interpreter (aka "CPython") is provided in the installers with -pypy3- in their filename.

Download

Miniforge installers are available here: https://github.com/conda-forge/miniforge/releases

Miniforge3

Latest installers with Python 3.12 (*) in the base environment:

OS	Architecture	Minimum Version	Download
Linux	x86_64 (amd64)	glibc >= 2.17	`Miniforge3-Linux-x86_64` @ latest
Linux	aarch64 (arm64) `(**)`	glibc >= 2.17	`Miniforge3-Linux-aarch64` @ latest
Linux	ppc64le (POWER8/9)	glibc >= 2.17	`Miniforge3-Linux-ppc64le` @ latest
macOS	x86_64	macOS >= 10.13	`Miniforge3-MacOSX-x86_64` @ latest
macOS	arm64 (Apple Silicon) `(***)`	macOS >= 11.0	`Miniforge3-MacOSX-arm64` @ latest
Windows	x86_64	Windows >= 7	`Miniforge3-Windows-x86_64` @ latest

(*) The Python version is specific only to the base environment. Conda can create new environments with different Python versions and implementations.

(**) For Raspberry PI that include a 64 bit processor, you must also use a 64-bit operating system such as Raspberry Pi OS 64-bit or Ubuntu for Raspberry PI. The versions listed as "System: 32-bit" are not compatible with the installers on this website.

(***) Apple silicon builds are experimental and haven't had testing like the other platforms.

🚨 PyPy support is deprecated (Deprecated as of August 2024) 🚨

TL;DR: We are planning to remove PyPy from conda-forge feedstock recipes in a few weeks (and thus to stop building new releases of packages for PyPy), unless there is substantial enough interest to justify the continued maintenance effort.

To help with this transition, the latest installers will:

The installer will refuse to proceed every two weeks in October
The installer will refuse to proceed every ten days in November
The installer will refuse to proceed every five days in December
The installer will refuse to proceed in 2025+

Miniforge-pypy3

Latest installers with PyPy 3.9 in the base environment are listed below. However, the latest installers will cease to work and will stop being made available in 2025. You should therefore pin to 24.7.0 if you require PyPy3.

OS	Architecture	Minimum Version	Miniforge Version
Linux	x86_64 (amd64)	glibc >= 2.17	24.9.2-0
Linux	x86_64 (amd64)	glibc >= 2.12	24.3.0-0
Linux	aarch64 (arm64)	glibc >= 2.17	24.9.2-0
Linux	aarch64 (arm64)	glibc >= 2.12	24.3.0-0
Linux	ppc64le (POWER8/9)	glibc >= 2.17	24.9.2-0
Linux	ppc64le (POWER8/9)	glibc >= 2.12	24.3.0-0
macOS	x86_64	macOS >= 10.13	24.9.2-0
macOS	x86_64	macOS >= 10.9	24.3.0-0
Windows	x86_64	Windows >= 7	24.9.2-0

🚨 Mambaforge (Deprecated as of July 2024) 🚨

Update for July 2024:

As of July 2024, Mambaforge is deprecated. We suggest users switch to Miniforge3 immediately. These installers will be retired from new releases after January 2025. To assist in the migration, we will be introducing rollowing brownouts to the latest Mambaforge installer. Installers up to version 24.5.0-1 will not have any brownouts. 24.5.0-1 will include a warning message. Installers 2024.5.0-2 and later will have the following brownout schedule:

The installer will refuse to proceed every two weeks in October
The installer will refuse to proceed every ten days in November
The installer will refuse to proceed every five days in December
The installer will refuse to proceed in 2025+

Previous information:

With the release of Miniforge3-23.3.1-0, that incorporated the changes in #277, the packages and configuration of Mambaforge and Miniforge3 are now identical. The only difference between the two is the name of the installer and, subsequently, the default installation directory.

We recommend switching to Miniforge3 immediately. These installers will be retired in January 2025. To assist in the migration to Miniforge3 for CI users, we've stopped the latest Mambaforge (24.5+) installer from proceeding with following schedule

Every two weeks in October
Every ten days in November
Every five days in December
Never in 2025

You can still find the latest installers in the 24.9.2 release.

Install

Unix-like platforms (macOS & Linux)

Download the installer using curl or wget or your favorite program and run the script. For eg:

curl -L -O "https://github.com/conda-forge/miniforge/releases/latest/download/Miniforge3-$(uname)-$(uname -m).sh"
bash Miniforge3-$(uname)-$(uname -m).sh

or

wget "https://github.com/conda-forge/miniforge/releases/latest/download/Miniforge3-$(uname)-$(uname -m).sh"
bash Miniforge3-$(uname)-$(uname -m).sh

Uninstallation

Uninstalling Miniforge means removing the files that were created during the installation process. You will typically want to remove:

Any modifications to your shell rc files that were made by Miniforge:

# Use this first command to see what rc files will be updated
conda init --reverse --dry-run
# Use this next command to take action on the rc files listed above
conda init --reverse
# Temporarily IGNORE the shell message
#       'For changes to take effect, close and re-open your current shell.',
# and CLOSE THE SHELL ONLY AFTER the 3rd step below is completed.

Remove the folder and all subfolders where the base environment for Miniforge was installed:

CONDA_BASE_ENVIRONMENT=$(conda info --base)
echo The next command will delete all files in ${CONDA_BASE_ENVIRONMENT}
# Warning, the rm command below is irreversible!
# check the output of the echo command above
# To make sure you are deleting the correct directory
rm -rf ${CONDA_BASE_ENVIRONMENT}

Any global conda configuration files that are left behind.

echo ${HOME}/.condarc will be removed if it exists
rm -f "${HOME}/.condarc"
echo ${HOME}/.conda and underlying files will be removed if they exist.
rm -fr ${HOME}/.conda

Windows

Download and execute the Windows installer. Follow the prompts, taking note of the options to "Create start menu shortcuts" and "Add Miniforge3 to my PATH environment variable". The latter is not selected by default due to potential conflicts with other software. Without Miniforge3 on the path, the most convenient way to use the installed software (such as commands conda and mamba) will be via the "Miniforge Prompt" installed to the start menu.

There are known issues with the usage of special characters and spaces in the installation location, see for example conda-forge#484. We recommend users install in a directory without any such characters in the name.

Non-interactive install

For non-interactive usage one can use the batch install option:

bash Miniforge3-Linux-x86_64.sh -b  # or similar for other installers for unix platforms

Look at the extra options by running the following:

bash Miniforge3-Linux-x86_64.sh -h

or if you are on windows, run:

start /wait "" Miniforge3-Windows-x86_64.exe /InstallationType=JustMe /RegisterPython=0 /S /D=%UserProfile%\Miniforge3

Downloading the installer as part of a CI pipeline

If you wish to download the appropriate installer through the command line in a more automated fashion, you may wish to a command similar to

For Linux, any architecture, use the following command

wget -O Miniforge3.sh "https://github.com/conda-forge/miniforge/releases/latest/download/Miniforge3-$(uname)-$(uname -m).sh"

For macOS, any architecture, use the following command

curl -fsSLo Miniforge3.sh "https://github.com/conda-forge/miniforge/releases/latest/download/Miniforge3-MacOSX-$(uname -m).sh"

This will download the appropriate installer for the present architecture with the filename Miniforge3.sh. Run the shell script with the command in batch mode with the -b flash:

bash Miniforge3.sh -b -p "${HOME}/conda"

-p is prefix option. A directory wil be created on "${HOME}/conda".

Then you should create the path to conda and activate conda. Run this command:

source "${HOME}/conda/etc/profile.d/conda.sh"
# For mamba support also run the following command
source "${HOME}/conda/etc/profile.d/mamba.sh"

Finally, you can run the command to activate the base environment

conda activate

Homebrew

On macOS, you can install miniforge with Homebrew by running

brew install miniforge

Usage

If Miniforge is on the system path (default on macOS and Linux), its versions of the conda and mamba programs can be used at any command prompt. The most notable difference is that the default channel for packages will be conda-forge.

On Windows, Miniforge is not added to the system path by default. In this case, conda/mamba cannot be used from ordinary command prompts without the full path of the executables, e.g. C:\Users\myusername\miniforge3\condabin\conda. Instead, it is recommended to use the Miniforge Prompt, available from the Start menu. If desired, the C:\Users\myusername\miniforge3\condabin folder may be added to the path environment variable manually after installation so the software may be used more conveniently from any command prompt with limited chance of software conflicts.

Features

Automatic build of constructor.
Automatic upload of constructor results.
Automatic testing of constructor.
Integration with conda-forge's developer documentation.
Integration with conda-forge's official site.
Upstream to Anaconda ?

Testing

After construction on the CI, the installer is tested against a range of distribution that match the installer architecture ($ARCH). For example when architecture is aarch64, the constructed installer is tested against:

Centos 7
Debian Bullseye (11)
Debian Bookworm (12)
Ubuntu 16.04 (LTS)
Ubuntu 18.04 (LTS)
Ubuntu 20.04 (LTS)
Ubuntu 22.04 (LTS)
Ubuntu 24.04 (Latest release -- also happens to be LTS)

Building a Miniforge Installer

Installers are built and uploaded via the CI but if you want to construct your own Miniforge installer, here is how:

# Configuration
export ARCH=aarch64
export DOCKERIMAGE=condaforge/linux-anvil-aarch64

bash build_miniforge.sh

Support for older operating systems

Support for macOS 10.9-10.12

If you require support for macOS 10.9 through 10.12 you may download version 24.3.0-0 of miniforge available at https://github.com/conda-forge/miniforge/releases/tag/24.3.0-0

Support for glibc 2.12-2.16

If you require support for glibc 2.12 through 2.16 you may download version 24.3.0-0 of miniforge available at https://github.com/conda-forge/miniforge/releases/tag/24.3.0-0

FAQ

What's the difference between Mambaforge and Miniforge?

After the release of Miniforge 23.3.1 in August 2023, Miniforge and Mambaforge are essentially identical. The only difference is the name of the installer and subsequently the default installation path.

Before that release, Miniforge only shipped conda, while Mambaforge added mamba on top. Since Miniconda started shipping conda-libmamba-solver in July 2023, Miniforge followed suit and started shipping it too in August. At that point, since conda-libmamba-solver depends on libmambapy, the only difference between Miniforge and Mambaforge was the presence of the mamba Python package. To minimize surprises, we decided to add mamba to Miniforge too.

Should I choose one or another going forward at the risk of one of them getting deprecated?

As of June 2024, Mambaforge is deprecated and will be retired in January 2025. We recommend users switch to Miniforge3 immediately. For more details, please see the note above.

Release

To release a new version of Miniforge:

Make a new pre-release on GitHub with name $CONDA_VERSION-$BUILD_NUMBER
Wait until all artifacts are uploaded by CI
- For each build, we upload 3 artifacts
  1. One installer with the version name
  2. One installer without the version name
  3. The SHA256
- At the time of writing, the is a sum of 72 artifacts, and with the two sources, we expect a grand total of 74 artifacts.
Mark the pre-release as a release

NOTE: using a pre-release is important to make sure the latest links work.

License

BSD 3-Clause

History

Relevant conversations:

License

paugier/miniforge

ErrorLooks like something went wrong!

About

Resources

License

Uh oh!

Stars

Watchers

Forks

Releases

Packages 0

Languages

Error
Looks like something went wrong!

Packages