now, supports Raspbian Jessie (2016.04.30), with RaspBerryPi3
- OS installation and setup to run fort the SDH sensors
- It shows basic installation process for Raspi Sensor
- Jeonghoon Kang (https://github.com/jeonghoonkang), Wonsik Ko (https://github.com/kowonsik), Philman Jeong(https://github.com/ipmstyle), Sukun Kim (https://github.com/sukunkim)
You can connect wireless sensors to your cyber space easily, just trying to add BerePi module sensor, to your RaspberryPi. BerePi project opens software which using BerePi hardware modules.
- Simple LED video 01 ( YouTube : https://youtu.be/ygJ3qMiGQvw )
- BereCO2 HW module
- BereCO2 update with enclosure
- Previous Enclosure
- BereCO2 update with SHT20 (KETI motes sensor board)
- New version will be next week
- SHT20 board photo and connection : (https://raw.githubusercontent.com/jeonghoonkang/BerePi/master/files/Raspi_temp_humi_sht20_keti_motes_bd_00.jpg), (https://raw.githubusercontent.com/jeonghoonkang/BerePi/master/files/Raspi_temp_humi_sht20_keti_motes_bd_01.jpg)
- BereCO2 update with SHT20 (KETI motes sensor board)
- Please follow Wiki(https://github.com/jeonghoonkang/BerePi/wiki) to install pre-configured SD image
- Old Installation note
- Download OS image and set up scripts and environemnt, automatically
- https://github.com/jeonghoonkang/BerePi/blob/master/Install_Raspi_OS.md
- additional nice works :
- http://www.raspberrypi-spy.co.uk/
- http://www.raspberrypi-spy.co.uk/berryclip-6-led-add-on-board/berryclip-6-led-add-on-board-instructions/
- If you want to setup BerePi with your own Ubuntu Linux, please run below shell script files to setup packages, development environment
- Raspi init setting : same in the installation instruction
- please use, wget https://raw.githubusercontent.com/jeonghoonkang/BerePi/master/setup/init.sh
- short URL is https://goo.gl/GDiYfN
- It downloads init.sh file
- download and run : source init.sh
- Raspi2 PinOut:
- Raspi init setting : same in the installation instruction