Arduino_Bluetooth_Basic.ino

/* 
 *  Bluetooh Basic: LED ON OFF - Avishkar
 *  Coder - Mayoogh Girish
 *  Website - http://bit.do/Avishkar
 *  Download the App : 
 *  This program lets you to control a LED on pin 13 of arduino using a bluetooth module
 */
char Incoming_value = 0;                //Variable for storing Incoming_value
void setup() 
{
  Serial.begin(9600);         //Sets the data rate in bits per second (baud) for serial data transmission
  pinMode(13, OUTPUT);        //Sets digital pin 13 as output pin
}
void loop()
{
  if(Serial.available() > 0)  
  {
    Incoming_value = Serial.read();      //Read the incoming data and store it into variable Incoming_value
    Serial.print(Incoming_value);        //Print Value of Incoming_value in Serial monitor
    Serial.print("\n");        //New line 
    if(Incoming_value == '1')            //Checks whether value of Incoming_value is equal to 1 
      digitalWrite(13, HIGH);  //If value is 1 then LED turns ON
    else if(Incoming_value == '0')       //Checks whether value of Incoming_value is equal to 0
      digitalWrite(13, LOW);   //If value is 0 then LED turns OFF
  }                            
 
}