diff --git a/documentation/asciidoc/accessories/ai-camera/getting-started.adoc b/documentation/asciidoc/accessories/ai-camera/getting-started.adoc index 82108cd6c..07d7812a5 100644 --- a/documentation/asciidoc/accessories/ai-camera/getting-started.adoc +++ b/documentation/asciidoc/accessories/ai-camera/getting-started.adoc @@ -126,7 +126,7 @@ Run the following script from the repository to run YOLOv8 object detection: [source,console] ---- -$ python imx500_object_detection_demo.py --model /usr/share/imx500-models/imx500_network_yolov8n_pp.rpk --ignore-dash-labels -r +$ python imx500_object_detection_demo.py --model /usr/share/imx500-models/imx500_network_ssd_mobilenetv2_fpnlite_320x320_pp.rpk ---- To try pose estimation in Picamera2, run the following script from the repository: diff --git a/documentation/asciidoc/accessories/ai-camera/model-conversion.adoc b/documentation/asciidoc/accessories/ai-camera/model-conversion.adoc index 0b95f8789..f6cd7e76b 100644 --- a/documentation/asciidoc/accessories/ai-camera/model-conversion.adoc +++ b/documentation/asciidoc/accessories/ai-camera/model-conversion.adoc @@ -94,7 +94,7 @@ To package the model into an RPK file, run the following command: [source,console] ---- -$ imx500-package.sh -i -o +$ imx500-package -i -o ---- This command should create a file named `network.rpk` in the output folder. You'll pass the name of this file to your IMX500 camera applications. diff --git a/documentation/asciidoc/accessories/display/display_intro.adoc b/documentation/asciidoc/accessories/display/display_intro.adoc index 51fb92313..e93e8181b 100644 --- a/documentation/asciidoc/accessories/display/display_intro.adoc +++ b/documentation/asciidoc/accessories/display/display_intro.adoc @@ -5,7 +5,7 @@ The https://www.raspberrypi.com/products/raspberry-pi-touch-display/[Raspberry P .The Raspberry Pi 7-inch Touch Display image::images/display.png[The Raspberry Pi 7-inch Touch Display, width="70%"] -The Touch Display is compatible with all models of Raspberry Pi from Raspberry Pi 1B+ onwards, except Raspberry Pi Zero and Zero 2 W, which lack a DSI connector. The earliest Raspberry Pi models lack appropriate mounting holes, requiring additional mounting hardware to fit the stand-offs on the display PCB. +The Touch Display is compatible with all models of Raspberry Pi, except Raspberry Pi Zero and Zero 2 W, which lack a DSI connector. The earliest Raspberry Pi models lack appropriate mounting holes, requiring additional mounting hardware to fit the stand-offs on the display PCB. The display has the following key features: @@ -113,7 +113,7 @@ NOTE: It is not possible to rotate the DSI display separately from the HDMI disp WARNING: Rotating touch input via device tree can cause conflicts with your input library. Whenever possible, configure touch event rotation in your input library or desktop. -Rotation of touch input is independent of the orientation of the display itself. To change this you need to manually add a `dtoverlay` instruction in xref:../computers/config_txt.adoc[`/boot/firmware/config.txt`]. Add the following line in `config.txt`: +Rotation of touch input is independent of the orientation of the display itself. To change this you need to manually add a `dtoverlay` instruction in xref:../computers/config_txt.adoc[`/boot/firmware/config.txt`]. Add the following line at the end of `config.txt`: [source,ini] ---- diff --git a/documentation/asciidoc/accessories/touch-display-2/about.adoc b/documentation/asciidoc/accessories/touch-display-2/about.adoc index 3adbdcc7c..fbf7296a7 100644 --- a/documentation/asciidoc/accessories/touch-display-2/about.adoc +++ b/documentation/asciidoc/accessories/touch-display-2/about.adoc @@ -1,6 +1,6 @@ == About -The https://www.raspberrypi.com/products/raspberry-pi-touch-display-2/[Raspberry Pi Touch Display 2] is a portrait orientation touchscreen LCD display designed for interactive projects like tablets, entertainment systems, and information dashboards. +The https://www.raspberrypi.com/products/touch-display-2/[Raspberry Pi Touch Display 2] is a portrait orientation touchscreen LCD display designed for interactive projects like tablets, entertainment systems, and information dashboards. .The Raspberry Pi Touch Display 2 image::images/touch-display-2-hero.jpg[width="80%"] @@ -42,12 +42,12 @@ Once you have determined the correct FFC for your Raspberry Pi model, complete t . Disconnect your Raspberry Pi from power. . Lift the retaining clips on either side of the FFC connector on the Touch Display 2. -. Insert one 15-way end of your FFC into the Touch Display 2 FFC connector, with the copper contacts facing upwards, away from the Touch Display 2. +. Insert one 15-way end of your FFC into the Touch Display 2 FFC connector, with the metal contacts facing upwards, away from the Touch Display 2. + TIP: If you use the 22-way to 15-way FFC, the 22-way end is the _smaller_ end of the cable. Insert the _larger_ end of the cable into the Touch Display 2. . While holding the FFC firmly in place, simultaneously push both retaining clips down on the FFC connector of the Touch Display 2. . Lift the retaining clips on either side of the DSI connector of your Raspberry Pi. This port should be marked with some variation of the term `DISPLAY` or `DISP`. If your Raspberry Pi has multiple DSI connectors, prefer the port labelled `1`. -. Insert the other end of your FFC into the Raspberry Pi DSI connector, with the copper contacts facing towards the Ethernet and USB-A ports. +. Insert the other end of your FFC into the Raspberry Pi DSI connector, with the metal contacts facing towards the Ethernet and USB-A ports. . While holding the FFC firmly in place, simultaneously push both retaining clips down on the DSI connector of the Raspberry Pi. . Plug the GPIO connector cable into the port marked `J1` on the Touch Display 2. . Connect the other (three-pin) end of the GPIO connector cable to pins 2, 4, and 6 of the xref:../computers/raspberry-pi.adoc#gpio[Raspberry Pi's GPIO]. Connect the red cable (5V power) to pin 2, and the black cable (ground) to pin 6. Viewed from above, with the Ethernet and USB-A ports facing down, these pins are located at the top right of the board, with pin 2 in the top right-most position. @@ -77,7 +77,7 @@ If you want to physically rotate the display, or mount it in a specific position ==== Rotate screen without a desktop -To set the screen orientation on a device that lacks a desktop environment, edit the `/boot/firmware/cmdline.txt` configuration file to pass an orientation to the system. Add the following line to `cmdline.txt`: +To set the screen orientation on a device that lacks a desktop environment, edit the `/boot/firmware/cmdline.txt` configuration file to pass an orientation to the system. Add the following entry to the end of `cmdline.txt`: [source,ini] ---- diff --git a/documentation/asciidoc/accessories/usb-3-hub.adoc b/documentation/asciidoc/accessories/usb-3-hub.adoc new file mode 100644 index 000000000..44c1bec1a --- /dev/null +++ b/documentation/asciidoc/accessories/usb-3-hub.adoc @@ -0,0 +1 @@ +include::usb-3-hub/about.adoc[] diff --git a/documentation/asciidoc/accessories/usb-3-hub/about.adoc b/documentation/asciidoc/accessories/usb-3-hub/about.adoc new file mode 100644 index 000000000..c67d1f770 --- /dev/null +++ b/documentation/asciidoc/accessories/usb-3-hub/about.adoc @@ -0,0 +1,17 @@ +== About + +The https://www.raspberrypi.com/products/usb-3-hub/[Raspberry Pi USB 3 Hub] provides extra connectivity for your devices, extending one USB-A port into four. An optional external USB-C power input supports high-power peripherals. You can use the USB 3 Hub to power low-power peripherals, such as most mice and keyboards, using no external power. + +.The Raspberry Pi USB 3.0 Hub +image::images/usb-3-hub-hero.png[width="80%"] + +== Specification + +* 1× upstream USB 3.0 Type-A male connector on 8cm captive cable +* 4× downstream USB 3.0 Type-A ports +* Data transfer speeds up to 5Gbps +* Power transfer up to 900 mA (4.5 W); optional external USB-C power input provides up to 5V @ 3A for high-power downstream peripherals +* Compatible with USB 3.0 and USB 2.0 Type-A host ports + +.Physical specification +image::images/usb-3-hub-physical-specification.png[] diff --git a/documentation/asciidoc/accessories/usb-3-hub/images/usb-3-hub-hero.png b/documentation/asciidoc/accessories/usb-3-hub/images/usb-3-hub-hero.png new file mode 100644 index 000000000..7f3bc2b9a Binary files /dev/null and b/documentation/asciidoc/accessories/usb-3-hub/images/usb-3-hub-hero.png differ diff --git a/documentation/asciidoc/accessories/usb-3-hub/images/usb-3-hub-physical-specification.png b/documentation/asciidoc/accessories/usb-3-hub/images/usb-3-hub-physical-specification.png new file mode 100644 index 000000000..7b469d14c Binary files /dev/null and b/documentation/asciidoc/accessories/usb-3-hub/images/usb-3-hub-physical-specification.png differ diff --git a/documentation/images/full-sized/usb-3-hub.png b/documentation/images/full-sized/usb-3-hub.png new file mode 100644 index 000000000..31c75a1a2 Binary files /dev/null and b/documentation/images/full-sized/usb-3-hub.png differ diff --git a/documentation/images/usb-3-hub-SMALL.png b/documentation/images/usb-3-hub-SMALL.png new file mode 100644 index 000000000..41e1d6bc4 Binary files /dev/null and b/documentation/images/usb-3-hub-SMALL.png differ diff --git a/documentation/index.json b/documentation/index.json index b79d1c675..a929d6afc 100644 --- a/documentation/index.json +++ b/documentation/index.json @@ -132,6 +132,12 @@ "image": "full-sized/Keyboard-and-Mouse.png", "subpath": "keyboard-and-mouse.adoc" }, + { + "title": "USB Hub", + "description": "Official Raspberry Pi USB hub", + "image": "full-sized/usb-3-hub.png", + "subpath": "usb-3-hub.adoc" + }, { "title": "Build HAT", "description": "How to use the Build HAT", diff --git a/jekyll-assets/_includes/header.html b/jekyll-assets/_includes/header.html index 8ebcf8799..6b1743c00 100644 --- a/jekyll-assets/_includes/header.html +++ b/jekyll-assets/_includes/header.html @@ -236,14 +236,7 @@ color: #fff; background-color: #333; } -#__rptl-header .__rptl-header-nav-link--for-home { - color: #cd2355; - font-weight: 700; -} -#__rptl-header .__rptl-header-nav-link--for-home:hover { - background-color: #cd2355; -} -#__rptl-header .__rptl-header-nav-link--for-industry { +#__rptl-header .__rptl-header-nav-link--for-home, #__rptl-header .__rptl-header-nav-link--for-industry { font-weight: 700; } @media (min-width: 800px) { @@ -264,7 +257,7 @@
- +