Skip to content

Latest commit

 

History

History
34 lines (33 loc) · 1.99 KB

transport-options.md

File metadata and controls

34 lines (33 loc) · 1.99 KB
Raw

Theese variables define transport options for BlueSuite command line tools. They can be specified in environment or using the -TRANS option. See also this post http://pfalcon-oe.blogspot.ru/2012/01/enabling-spi-logging-in-bluesuite.html.

  • SPITRANS - SPI transport driver, valid values: USB, LPT, REMOTE, XAPSIM, SDIOCEV5, KALSIM, SDIOCE, SDIO, TRB or any custom transport name (e.g. using sometrans name will instruct PTTransport.dll to use sometrans.dll as a driver). Only USB and LPT drivers are available in BlueSuite, other drivers are available in other CSR packages. Use USB transport for csr-spi-ftdi;
  • SPIPORT - transport port identifier, usually an integer. Default: 1 for USB, 1 for LPT, remote for REMOTE. Use 1 for csr-spi-ftdi;
  • SPIREMOTEIP - IP address of the remote SPI programmer for REMOTE transport, default: 127.0.0.1. Remote programmer TCP port number is hardcoded to 10122;
  • SPI_DELAY_MODE - signed integer;
  • SPI_STOP_CHIP - valid values are ON, OFF and AUTO;
  • SPI_FAST_RESET - valid values are SLOW, FAST, FASTER;
  • SPI_DUMMY_MODE - valid values are FULL, OVERRIDE
  • SPI_DUMMY_FILE - text file name of unknown format;
  • SPIDEBUG_FULL - valid values are ON, OFF, TRUE, FALSE;
  • SPIDEBUG_REPRODUCIBLE - valid values are ON, OFF, TRUE, FALSE;
  • SPIDEBUG_WRITES - valid values are ON, OFF, TRUE, FALSE;
  • SPIDEBUG_READS - valid values are ON, OFF, TRUE, FALSE;
  • SPIDEBUG_WIRE - valid values are ON, OFF, TRUE, FALSE;
  • SPIDEBUG_OPTIONS - integer bitfield;
  • SPIDEBUG - valid values are ON, OFF, TRUE, FALSE;
  • SPIDEBUG_FILE - output file name, can be CON: to output to a terminal;
  • SPISLOW - perform at slowest clock speed, valid values are ON, OFF, not applicable to csr-spi-ftdi;
  • SPICLOCK - SPI clock rate, in kHz, used internally to control clock rate in SPI driver.
  • SPIMAXCLOCK - maximum SPI clock rate in kHz, default is 1000.