vnswa_no_ip_cfg.ini

#
# Copyright (c) 2014 Juniper Networks, Inc. All rights reserved.
#
# Vnswad configuration options
#

[CONTROL-NODE]
# IP address to be used to connect to control-node. If IP is not configured 
# for server1, value provided by discovery service will be used.
servers=127.0.0.1:5269

[DEFAULT]
# IP address and port to be used to connect to collector. If these are not
# configured, value provided by discovery service will be used. Multiple
# IP:port strings separated by space can be provided
collectors=127.0.0.1:8086

# Agent mode : can be vrouter / tsn / tor
# agent_mode=

# Aging time for flow-records in seconds
flow_cache_timeout=10

# Hostname of compute-node. If this is not configured value from `hostname`
# will be taken
# hostname=

# Http server port for inspecting vnswad state (useful for debugging)
# http_server_port=8085

# Category for logging. Default value is '*'
# log_category=

# Local log file name
log_file=vrouter.log

# Log severity levels. Possible values are SYS_EMERG, SYS_ALERT, SYS_CRIT, 
# SYS_ERR, SYS_WARN, SYS_NOTICE, SYS_INFO and SYS_DEBUG. Default is SYS_DEBUG
# log_level=SYS_DEBUG

# Enable/Disable local file logging. Possible values are 0 (disable) and 1 (enable)
# log_local=0

# Encapsulation type for tunnel. Possible values are MPLSoGRE, MPLSoUDP, VXLAN
# tunnel_type=

# DHCP relay mode (true or false) to determine if a DHCP request in fabric
# interface with an unconfigured IP should be relayed or not
# dhcp_relay_mode=

#Mode in which vrouter is running, possible values include dpdk, nic or empty
#platform

# Agent base directory
agent_base_directory=.

[DNS]
# IP address and port to be used to connect to dns-node. Maximum of 2 IP
# addresses (separated by a space) can be provided. If no IP is configured then
# the value provided by discovery service will be used.
servers=127.0.0.1:53

[HYPERVISOR]
# Hypervisor type. Possible values are kvm, xen and vmware
# type=kvm

# Link-local IP address and prefix in ip/prefix_len format (for xen)
# xen_ll_ip=

# Link-local interface name when hypervisor type is Xen
# xen_ll_interface=

# Physical interface name when hypervisor type is vmware
# vmware_physical_interface=

[FLOWS]
# Maximum flows allowed per VM (given as % of maximum system flows)
max_vm_flows=100
# Maximum number of link-local flows allowed across all VMs
max_system_linklocal_flows=3
# Maximum number of link-local flows allowed per VM
max_vm_linklocal_flows=2

[METADATA]
# Shared secret for metadata proxy service
metadata_proxy_secret=contrail

[NETWORKS]
# control-channel IP address used by WEB-UI to connect to vnswad to fetch
# required information
# control_network_ip=

[VIRTUAL-HOST-INTERFACE]
# name of virtual host interface
name=vhost0

# Gateway IP address for virtual host
gateway=10.1.1.254

# Physical interface name to which virtual host interface maps to
physical_interface=vnet0

[GATEWAY-0]
# Name of the routing_instance for which the gateway is being configured
# routing_instance=default-domain:admin:public:public

# Gateway interface name
# interface=vgw

# Virtual network ip blocks for which gateway service is required.
# ip_blocks=1.1.1.1/24

[GATEWAY-1]
# Name of the routing_instance for which the gateway is being configured
# routing_instance=default-domain:admin:public1:public1

# Gateway interface name
# interface=vgw1

# Virtual network ip blocks for which gateway service is required.
# ip_blocks=2.2.1.0/24, 2.2.2.0/24

# Routes to be exported in routing_instance
# routes= 10.10.10.1/24, 11.11.11.1/24

[RESTART]
# Enable/Disable backup of config and resource files
#backup_enable=true
#
# Directory containing backup of config and resource files
backup_dir=/tmp/backup
# Number of backup files
# backup_file_count=3
#
# Agent avoids generating backup file if change is detected within time
# configured below (in milli-sec)
# backup_idle_timeout=10000
#
# Restore config/resource definitions from file
# restore_enable=true
#
# Audit time for config/resource read from file
# restore_audit_timeout=15000