CHANGELOG.md

Changelog

This file records changes to the codebase grouped by version release. Unreleased changes are generally only present during development (relevant parts of the changelog can be written and saved in that section before a version number has been assigned)

[1.28.3] - 2023-05-16

• Updated at.Project() to explicitly take in the settings arguments for sim_start, sim_end, and sim_dt. These are now applied after databooks are loaded, fixing a bug where these arguments would get overwritten when loading the databook.

[1.28.2] - 2023-04-05

• at.calibrate now supports passing any additional arguments into the optimization function e.g., sc.asd allowing additional options for customizing the optimization.

[1.28.1] - 2023-02-05

• Updated various Pandas operations to improve compatibility with Pandas 2.2.0
• Replaced 'probability' units with 'rate' units in many of the library example frameworks
• For many of those parameters, also removed the maximum upper limit value of 1 as such parameters should not generally have this limit
• Numerical indices are no longer inadvertently added to framework dataframes (compartments, characteristics, parameters, and interactions).

Backwards-compatibility notes

• Removing the upper limit of 1 on parameters that were in 'probability' units may change the output of models using the library example frameworks. The updated results should be considered more realistic because the 'probability' parameters were actually behaving as rates, and therefore should not have had an upper limit imposed in the first place.

[1.28.0] - 2023-12-03

• Added ability to provide a row in the databook for 'all' (or 'All') populations, as shorthand for entering the same value in every population. This option serves as a fallback value if population-specific values have also been provided.
• Added optional n_cols argument to at.plot_series to allow series plots to appear in a single figure using subplots

[1.27.0] - 2023-11-07

• ProjectData.get_ts() now correctly handles retrieving timeseries data from interactions and transfers with underscores in their name
• ProjectData now validates that transfer and interaction names are unique
• Improved handling Excel cell references if population names and framework variable full names overlap
• Added ability to place '#ignore' directives in places other than the first column of a spreadsheet, to selectively ignore parts of lines. Added documentation to cover this functionality.
• Fixed a bug where cells that were documented as being ignored actually populated content

[1.26.7] - 2023-10-20

• Warning messages now print the file/line they were generated from
• Added extra documentation on parallels with explicit ODE compartment models

[1.26.6] - 2023-09-26

• Improve error message if calibration file contains duplicate entries

[1.26.5] - 2023-08-29

• Transfer parameters no longer raise an error if specified in 'Duration' units
• Transfer parameters in rate units are no longer limited to a maximum value of 1

Backwards-compatibility notes

• Transfers in rate units with a databook value greater than 1 were internally limited to a value of 1 previously. Models with such transfers will produce different results. This is expected to be uncommon, as most models have transfer parameters with values less than 1.

[1.26.4] - 2023-08-25

• Some numerical errors in model.py (particularly relating to errors/warnings in parameter functions) are now caught and printed with more informative error messages.

[1.26.3] - 2023-07-18

• Change the table parsing routine again to resolve further edge cases, restore removal of leading and trailing spaces from cells in the framework, and improve performance. The original None behaviour has consequently been restored (undoing the change in 1.26.2) although it is still recommended that pandas.isna() is used instead of checking for None.

[1.26.2] - 2023-06-07

• Switch to sc.gitinfo from Sciris. The git commit hash recorded in Atomica objects will now only contain the first 7 characters. Code that uses at.fast_gitinfo should use sc.gitinfo instead.
• Improve robustness of the table parsing routine used by at.Framework. In some cases, the data type of empty cells is now NaN rather than None. This affects any code that either checks for the contents being None or which relies on None being treated as False in conditional statements e.g., if <contents>:. Affected code should instead use pandas.isna() which handles None, NaN, and pd.NA.

[1.26.1] - 2023-05-29

• Improve numerical robustness of SpendingPackageAdjustment under certain edge cases
• Fix bug in cumulative plot labelling that could result in the axis label containing more than one 'Cumulative' prefix

[1.26.0] - 2023-05-22

• Allow initializing compartments and characteristics with a 0 value by setting a default value without needing to add the quantity to the databook. This simplifies initialization of models that have large numbers of compartments that should always be initialized with a 0 value, without needing to add many databook entries or extra initialization characteristics.

[1.25.18] - 2023-01-09

• Allow framework variables with single characters (previously, all code names had to be at least two characters long)
• Improve handling of automatic number of workers if a number is provided instead of a collection of inputs
• Add optim_args argument to at.optimize which allows arguments to be passed to optimization functions such as ASD

[1.25.17] - 2022-10-05

• The "Databook pages" sheet in the framework is now optional, if a compartment, characteristic or parameter has a "Databook page" that does not appear in the "Databook pages" sheet (or if the "Databook pages" sheet is missing entirely) then the specified page will be created with the specified name as both the code name and full name. As the "Databook pages" sheet is created and populated with these names during framework validation, downstream code expecting the sheet to exist should not require any changes.

[1.25.15] - 2022-09-26

• Fix array size error for junctions belonging to a duration group (some otherwise valid frameworks previously raised an error when running the model)
• Fix missing cells/NaNs in equivalent spending caused by numerical precision errors

[1.25.14] - 2022-08-16

• Unpin matplotlib version in setup.py

[1.25.13] - 2022-07-19

• Improve exported results link labelling for transfers

[1.25.12] - 2022-07-15

• Implemented variable total spend in SpendingPackageAdjustment
• Optimized performance for SpendingPackageAdjustment if proportions are fixed by adding a fix_props flag that skips adding Adjustables for the proportions
• Improved framework validation robustness when dataframe cells contain NA-like values (np.nan or pd.NA) instead of just None

[1.25.11] - 2022-07-05

• Program number eligible defaults to 0 if target compartments are missing (rather than raising a key error)
• ProgramSet spreadsheet constructor is now a class method to allow inheritance
• Fixed bug where program overwrites that impact a transition parameter via at least one intermediate parameter did not impact outcomes
• Improved SpendingPackageAdjustment performance although varying total spend is not yet supported

[1.25.10] - 2022-04-06

• Fix bug in program fractional coverage where not all programs were constrained to a peak coverage of 1

[1.25.7] - 2021-09-02

• Update calls to sc.asd() to be compatible with Sciris v1.2.3
• Update installation instructions to use pip rather than setup.py directly
• Improve handling of unspecified timescales in plotting routines

[1.25.6] - 2021-07-26

• Unfreeze pandas dependency because they have fixed some regressions that affected atomica

[1.25.5] - 2021-07-08

• Replace deprecated sc.SItickformatter usage
• Fix bug in program coverage overwrite timestep scaling. Coverage overwrites must always be provided in dimensionless units

[1.25.4] - 2021-06-28

• Improved framework validation (informative errors raised in some additional cases)
• Calibrations can be loaded for mismatched frameworks/databooks - missing or extra entries will be skipped without raising an error

[1.25.3] - 2021-06-03

• Implemented Population.__contains__ to easily check whether variables are defined in a population
• Improved error message when plotting if requesting an output that is not defined in all populations

[1.25.2] - 2021-05-26

• Add ParameterSet.y_factors as a property attribute to quickly access and set y-factors.

[1.25.1] - 2021-05-26

• Fix bug in ProgramSet.remove_program() - this function would previously raise an error

[1.25.0] - 2021-05-06

• Added methods ParameterSet.calibration_spreadsheet(), ParameterSet.save_calibration() and ParameterSet.load_calibration() to allow saving calibration scale factors to spreadsheets that can be edited externally.

[1.24.4] - 2021-05-06

• Fix plotting routines that were previously checking for missing timescales by checking for None values, and were thus missing np.nan values. This change was introduced around version 1.24.1 when framework validation now guarantees that the parameter timescale is a numeric type. This causes missing timescales to be populated with nan rather than None.
• Add library framework for malaria

Backwards-compatibility notes

• Any code checking for missing timescales by checking for a None value should instead use pd.isna() to check for nan or None values

[1.24.3] - 2021-03-25

• Fixes a bug in validation that ensures parameters in 'proportion' units cannot have a timescale. Previously frameworks with this error would incorrectly pass validation

[1.24.1] - 2021-03-09

• Added validation of plots sheet in framework file
• Allow validating a framework multiple times
• Fix an edge case with timed transitions and split transition matrices

Backwards-compatibility notes

• In rare cases, if an existing framework file contains an error that was not previously detected, it may now produce an error when loaded. Such errors indicate problems in the framework that should be debugged as usual.

[1.23.4] - 2020-12-14

• Fix bug where program outcomes were not correctly applied if overwriting a function parameter that does not impact any transitions

[1.23.3] - 2020-11-10

• Added at.stop_logging() and an optional reset argument to at.start_logging()

[1.23.2] - 2020-10-22

• at.ProgramSet now stores all compartments with a non_targetable flag in at.ProgramSet.comps so that it can read/write workbooks for models that use coverage scenarios only.

[1.23.0] - 2020-10-22

• Exporting results now includes some time-aggregated quantities (summed over the year, rather than providing annualized values as of Jan 1)

[1.22.1] - 2020-09-11

• Added log level commands to calibrate() and reconcile() so that they respect at.Quiet() in the same way as optimize() already does.

[1.22.0] - 2020-09-09

• Update documentation to support Sphinx 3
• Added __all__ variables to modules so that module variables are no longer accidentally imported into the top-level Atomica module.
• Renamed defaults.py module demos.py

Backwards-compatibility notes

• Code that relied on module variables being imported to Atomica may now fail. For example, atomica.version was accidentally set to the version string rather than referencing the atomica.version module. Such code should be updated by finding the relevant module variable and referencing that instead - for example, replacing atomica.version with atomica.version.version.
• Plotting settings are no longer imported to atomica.settings by accident - instead, they should be accessed via atomica.plotting.settings only. The same usage pattern applies to settings in other modules like calibration and cascades.

[1.21.3] - 2020-09-08

• Project.calibrate() no longer saves the new calibration to the project by default

Backwards-compatibility notes

• Add the explicit argument save_to_project=True to calibrate() to match previous behaviour

[1.21.2] - 2020-09-07

• Drop version constraint for openpyxl to support both version 2.5 and >2.5

[1.21.1] - 2020-07-06

• Add equality operator to at.Timeseries
• Support passing in arrays to the at.TimeSeries constructor

[1.21] - 2020-06-27

• Refactored ProgramSet.save(filename, folder) to ProgramSet.save(fname) so that it now matches ProjectData and ProjectFramework
• at.atomica_path returns a Path object. The trailingsep argument has been removed as it is not relevant when returning a path. Legacy code may experience a TypeError: unsupported operand type(s) for +: 'WindowsPath' and 'str' or similar if the output of at.atomica_path is concatenated by addition. In general, this can be resolved by replacing + with / e.g. at.LIBRARY_PATH+'foo.xlsx' becomes at.LIBRARY_PATH/'foo.xlsx'.
• at.parent_dir returns a Path object
• Project.load_databook now supports passing in a ProjectData instance (as does the Project constructor)
• Remove unused num_interpops argument from Project.create_databook()
• Add support for '>' in transition matrix to represent junction residual

[1.19.0] - 2020-06-26

• Renamed calibration.py:perform_autofit() to calibration.py:calibrate()
• Added debug-level log messages, which can be viewed by setting atomica.logger.setLevel(1)
• Added changelog