0003-ssd1307fb-Speed-up-the-communication-with-the-contro.patch

From 5fa937351bb49d0acca0f534f7365325b03f9cf5 Mon Sep 17 00:00:00 2001
From: Maxime Ripard <maxime.ripard@free-electrons.com>
Date: Tue, 26 Feb 2013 11:46:40 +0100
Subject: [PATCH 3/5] ssd1307fb: Speed up the communication with the controller

The code until now was sending only 1pixel-wide page segment at once,
and started a new transfer every time. It has proven very inefficient,
because for one byte to display on the screen, we had to actually send 3
bytes over I2C: the address, the type of data that was going to the
controller, and then the actual data.

This patches changes that by sending a whole page at once, avoiding most
of this expensive overhead.

Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
---
 drivers/video/ssd1307fb.c | 11 ++++++++---
 1 file changed, 8 insertions(+), 3 deletions(-)

diff --git a/drivers/video/ssd1307fb.c b/drivers/video/ssd1307fb.c
index 85e0860..676241b 100644
--- a/drivers/video/ssd1307fb.c
+++ b/drivers/video/ssd1307fb.c
@@ -153,22 +153,27 @@ static void ssd1307fb_update_display(struct ssd1307fb_par *par)
 	 */
 
 	for (i = 0; i < (par->height / 8); i++) {
+		struct ssd1307fb_array *array;
+
 		ssd1307fb_write_cmd(par->client, SSD1307FB_START_PAGE_ADDRESS + i + par->page_offset);
 		ssd1307fb_write_cmd(par->client, 0x00);
 		ssd1307fb_write_cmd(par->client, 0x10);
 
+		array = ssd1307fb_alloc_array(par->width, SSD1307FB_DATA);
+
 		for (j = 0; j < par->width; j++) {
-			u8 buf = 0;
+			array->data[j] = 0;
 			for (k = 0; k < 8; k++) {
 				u32 page_length = par->width * i;
 				u32 index = page_length + (par->width * k + j) / 8;
 				u8 byte = *(vmem + index);
 				u8 bit = byte & (1 << (j % 8));
 				bit = bit >> (j % 8);
-				buf |= bit << k;
+				array->data[j] |= bit << k;
 			}
-			ssd1307fb_write_data(par->client, buf);
 		}
+
+		ssd1307fb_write_array(par->client, array, par->width);
 	}
 }
 
-- 
1.8.2.1