Fourier is a golfing language with a very obfuscated syntax. It is no longer undergoing development as of January 2018. For a more usable version of Fourier, use Noether.
x()
Repeat the code within the brackets until the accumulator equals the value of the accumulator at x
. After the open bracket, the accumulator is set to 0. Repeats can be nested.
x{a}{b}
If the result of a
equals the value of the accumulator at x
then run code b
. After the open curly bracket, the accumulator is set to 0. Ifs cannot be nested.
^
Increase the accumulator by one.
v
Decrease the accumulator by one.
n
Set the accumulator to the integer n
.
a
Takes the value of the accumulator as the ASCII code and outputs the character.
o
Outputs the value of the accumulator.
`x`
Prints the string between the backticks, e.g. `Hello, World!`
outputs Hello, World!
.
r
Sets the accumulator to a random value in the range 0 to the value of the accumulator.
~z
Creates a variable z
and sets it to value of the accumulator.
z
Sets the accumulator to the value of variable z
. If not previously initialised, the variable is equal to 0.
+x
Sets the accumulator to the value of the accumulator plus the value of x
.
-x
Sets the accumulator to the value of the accumulator minus the value of x
.
*x
Sets the accumulator to the value of the accumulator multiplied by the value of x
.
/x
Sets the accumulator to the value of the accumulator divided by the value of x
.
%x
Sets the accumulator to the remainder of the value of the accumulator divided by the value of x
.
Px
Sets the accumulator to the value of the accumulator to the power of x
.
xL
Sets the accumulator to the value of log 10 of the accumulator.
I
Sets the accumulator to the user input.
>x
Sets the accumulator to 1 if the value of the accumulator is greater than the value of x
, 0 if not.
<x
Sets the accumulator to 1 if the value of the accumulator is less than the value of x
, 0 if not.
=x
Sets the accumulator to 1 if the value of the accumulator is equal to the value of x
, 0 if not.
xd
Sets the accumulator to parts of the date depending on the value of x
:
Sets the accumulator to the seconds part of the current time.
Sets the accumulator to the minutes part of the current time.
Sets the accumulator to the hour part of the current time.
Sets the accumulator to the day part of the current date.
Sets the accumulator to the month part of the current date.
Sets the accumulator to the year part of the current date.
If the date is any other number (apart from 0, 1, 2, 3, 4, or 5), the accumulator is set to the current UNIX timestamp.
@
Clears the current output.
x;
Starts a time delay of x
seconds, during which, no code is executed.
33~j126(j^a~j)
"#$%&'()*+,-./0123456789:;<=>?@ABCDEFGHIJKLMNOPQRSTUVWXYZ[\]^_`abcdefghijklmnopqrstuvwxyz{|}~
1~yI~k(xoi^<k{1}{44a32a}y+x~gy~xg~yi^~i)
For input 30
:
0, 1, 1, 2, 3, 5, 8, 13, 21, 34, 55, 89, 144, 233, 377, 610, 987, 1597, 2584, 4181, 6765, 10946, 17711, 28657, 46368, 75025, 121393, 196418, 317811, 514229
(@2do58a1d~S<10{1}{0o}So58a0d~S<10{1}{0o}So1;)
This is just an example (output changes each second)
16:57:06
You can find two up to date online interpreters here and here.