m5 ATOM Echo fail in the compilation

[cop98]

The problem

impossible to compile firmware.
See below in the logs the error

Which version of ESPHome has the issue?

2024.4.0

What type of installation are you using?

Home Assistant Add-on

Which version of Home Assistant has the issue?

2024.4.3

What platform are you using?

ESP32

Board

No response

Component causing the issue

No response

Example YAML snippet

---
esphome:
  name: m5stack-atom-echo
  friendly_name: M5Stack Atom Echo
  name_add_mac_suffix: true
  project:
    name: m5stack.atom-echo-voice-assistant
    version: "1.0"
  min_version: 2023.11.1

esp32:
  board: m5stack-atom
  framework:
    type: esp-idf

logger:
api:
ota:

dashboard_import:
  package_import_url: github://esphome/firmware/voice-assistant/m5stack-atom-echo.yaml@main

wifi:
  on_connect:
    - delay: 5s  # Gives time for improv results to be transmitted
    - ble.disable:
  on_disconnect:
    - ble.enable:
  ssid: Dodo
  password: ddddddd
  manual_ip:
    static_ip: 192.168.0.178
    gateway: 192.168.0.1
    subnet: 255.255.255.0
  ap:

improv_serial:

esp32_improv:
  authorizer: none

button:
  - platform: factory_reset
    id: factory_reset_btn
    name: Factory reset

i2s_audio:
  i2s_lrclk_pin: GPIO33
  i2s_bclk_pin: GPIO19

microphone:
  - platform: i2s_audio
    id: echo_microphone
    i2s_din_pin: GPIO23
    adc_type: external
    pdm: true

speaker:
  - platform: i2s_audio
    id: echo_speaker
    i2s_dout_pin: GPIO22
    dac_type: external
    mode: mono

voice_assistant:
  id: va
  microphone: echo_microphone
  speaker: echo_speaker
  noise_suppression_level: 2
  auto_gain: 31dBFS
  volume_multiplier: 2.0
  vad_threshold: 3
  on_listening:
    - light.turn_on:
        id: led
        blue: 100%
        red: 0%
        green: 0%
        effect: "Slow Pulse"
  on_stt_vad_end:
    - light.turn_on:
        id: led
        blue: 100%
        red: 0%
        green: 0%
        effect: "Fast Pulse"
  on_tts_start:
    - light.turn_on:
        id: led
        blue: 100%
        red: 0%
        green: 0%
        brightness: 100%
        effect: none
  on_end:
    - delay: 100ms
    - wait_until:
        not:
          speaker.is_playing:
    - script.execute: reset_led
  on_error:
    - light.turn_on:
        id: led
        red: 100%
        green: 0%
        blue: 0%
        brightness: 100%
        effect: none
    - delay: 1s
    - script.execute: reset_led
  on_client_connected:
    - if:
        condition:
          switch.is_on: use_wake_word
        then:
          - voice_assistant.start_continuous:
          - script.execute: reset_led
  on_client_disconnected:
    - if:
        condition:
          switch.is_on: use_wake_word
        then:
          - voice_assistant.stop:
          - light.turn_off: led

binary_sensor:
  - platform: gpio
    pin:
      number: GPIO39
      inverted: true
    name: Button
    disabled_by_default: true
    entity_category: diagnostic
    id: echo_button
    on_multi_click:
      - timing:
          - ON for at least 250ms
          - OFF for at least 50ms
        then:
          - if:
              condition:
                switch.is_off: use_wake_word
              then:
                - if:
                    condition: voice_assistant.is_running
                    then:
                      - voice_assistant.stop:
                      - script.execute: reset_led
                    else:
                      - voice_assistant.start:
              else:
                - voice_assistant.stop
                - delay: 1s
                - script.execute: reset_led
                - script.wait: reset_led
                - voice_assistant.start_continuous:
      - timing:
          - ON for at least 10s
        then:
          - button.press: factory_reset_btn

light:
  - platform: esp32_rmt_led_strip
    id: led
    name: None
    disabled_by_default: true
    entity_category: config
    pin: GPIO27
    default_transition_length: 0s
    chipset: SK6812
    num_leds: 1
    rgb_order: grb
    rmt_channel: 0
    effects:
      - pulse:
          name: "Slow Pulse"
          transition_length: 250ms
          update_interval: 250ms
          min_brightness: 50%
          max_brightness: 100%
      - pulse:
          name: "Fast Pulse"
          transition_length: 100ms
          update_interval: 100ms
          min_brightness: 50%
          max_brightness: 100%

script:
  - id: reset_led
    then:
      - if:
          condition:
            - switch.is_on: use_wake_word
            - switch.is_on: use_listen_light
          then:
            - light.turn_on:
                id: led
                red: 100%
                green: 89%
                blue: 71%
                brightness: 60%
                effect: none
          else:
            - light.turn_off: led

switch:
  - platform: template
    name: Use wake word
    id: use_wake_word
    optimistic: true
    restore_mode: RESTORE_DEFAULT_ON
    entity_category: config
    on_turn_on:
      - lambda: id(va).set_use_wake_word(true);
      - if:
          condition:
            not:
              - voice_assistant.is_running
          then:
            - voice_assistant.start_continuous
      - script.execute: reset_led
    on_turn_off:
      - voice_assistant.stop
      - lambda: id(va).set_use_wake_word(false);
      - script.execute: reset_led
  - platform: template
    name: Use listen light
    id: use_listen_light
    optimistic: true
    restore_mode: RESTORE_DEFAULT_ON
    entity_category: config
    on_turn_on:
      - script.execute: reset_led
    on_turn_off:
      - script.execute: reset_led

external_components:
  - source: github://pr#5230
    components:
      - esp_adf
    refresh: 0s

esp_adf:

Anything in the logs that might be useful for us?

INFO ESPHome 2024.4.0
INFO Reading configuration /config/esphome/m5.yaml...
INFO Updating https://github.com/esphome/esphome.git@pull/5230/head
INFO Generating C++ source...
INFO Updating https://github.com/espressif/esp-adf@v2.5
INFO Updating submodules (components/esp-sr, components/esp-adf-libs) for https://github.com/espressif/esp-adf@v2.5
Traceback (most recent call last):
  File "/usr/local/bin/esphome", line 33, in <module>
    sys.exit(load_entry_point('esphome', 'console_scripts', 'esphome')())
             ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/esphome/esphome/__main__.py", line 1061, in main
    return run_esphome(sys.argv)
           ^^^^^^^^^^^^^^^^^^^^^
  File "/esphome/esphome/__main__.py", line 1048, in run_esphome
    rc = POST_CONFIG_ACTIONS[args.command](args, config)
         ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/esphome/esphome/__main__.py", line 427, in command_compile
    exit_code = write_cpp(config)
                ^^^^^^^^^^^^^^^^^
  File "/esphome/esphome/__main__.py", line 193, in write_cpp
    return write_cpp_file()
           ^^^^^^^^^^^^^^^^
  File "/esphome/esphome/__main__.py", line 211, in write_cpp_file
    writer.write_cpp(code_s)
  File "/esphome/esphome/writer.py", line 344, in write_cpp
    copy_src_tree()
  File "/esphome/esphome/writer.py", line 297, in copy_src_tree
    copy_files()
  File "/esphome/esphome/components/esp32/__init__.py", line 689, in copy_files
    shutil.copytree(
  File "/usr/lib/python3.11/shutil.py", line 561, in copytree
    return _copytree(entries=entries, src=src, dst=dst, symlinks=symlinks,
           ^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^
  File "/usr/lib/python3.11/shutil.py", line 515, in _copytree
    raise Error(errors)
shutil.Error: [('/data/idf_components/b0ad5728/components/esp-sr/docs/myapp/lib64', '/data/build/m5stack-atom-echo/components/esp-sr/docs/myapp/lib64', "[Errno 17] File exists: 'lib' -> '/data/build/m5stack-atom-echo/components/esp-sr/docs/myapp/lib64'"), ('/data/idf_components/b0ad5728/components/esp-sr/docs/myapp/bin/python', '/data/build/m5stack-atom-echo/components/esp-sr/docs/myapp/bin/python', "[Errno 17] File exists: 'python3' -> '/data/build/m5stack-atom-echo/components/esp-sr/docs/myapp/bin/python'"), ('/data/idf_components/b0ad5728/components/esp-sr/docs/myapp/bin/python3', '/data/build/m5stack-atom-echo/components/esp-sr/docs/myapp/bin/python3', "[Errno 17] File exists: '/usr/bin/python3' -> '/data/build/m5stack-atom-echo/components/esp-sr/docs/myapp/bin/python3'")]

Additional information

No response