You signed in with another tab or window. Reload to refresh your session.You signed out in another tab or window. Reload to refresh your session.You switched accounts on another tab or window. Reload to refresh your session.Dismiss alert
Compiling .pioenvs/esphome-web-camera/src/esphome/components/api/api_pb2_service.cpp.o
xtensa-esp32-elf-g++: error trying to exec 'as': execvp: No such file or directory
*** [.pioenvs/esphome-web-camera/src/esphome/components/api/api_frame_helper.cpp.o] Error 1
xtensa-esp32-elf-g++: error trying to exec 'as': execvp: No such file or directory
Which version of ESPHome has the issue?
2024.4.0
What type of installation are you using?
Docker
Which version of Home Assistant has the issue?
2024.4.2
What platform are you using?
ESP32
Board
ESP32-cam
Component causing the issue
No response
Example YAML snippet
substitutions:
name: esphome-web-camerafriendly_name: esp-cameraesphome:
name: ${name}friendly_name: ${friendly_name}name_add_mac_suffix: falseproject:
name: esphome.webversion: '1.0'esp32:
board: esp32devframework:
type: arduino# Example configuration entryesp32_camera:
name: my-cameraexternal_clock:
pin: GPIO27frequency: 20MHzi2c_pins:
sda: GPIO25scl: GPIO23data_pins: [GPIO17, GPIO35, GPIO34, GPIO5, GPIO39, GPIO18, GPIO36, GPIO19]vsync_pin: GPIO22href_pin: GPIO26pixel_clock_pin: GPIO21reset_pin: GPIO15resolution: 640x480jpeg_quality: 10# Enable logginglogger:
# Enable Home Assistant APIapi:
# Allow Over-The-Air updatesota:
# Allow provisioning Wi-Fi via serialimprov_serial:
wifi:
# Set up a wifi access pointap: {}# In combination with the `ap` this allows the user# to provision wifi credentials to the device via WiFi AP.captive_portal:
dashboard_import:
package_import_url: github://esphome/example-configs/esphome-web/esp32.yaml@mainimport_full_config: true# Sets up Bluetooth LE (Only on ESP32) to allow the user# to provision wifi credentials to the device.esp32_improv:
authorizer: none# To have a "next url" for improv serialweb_server:
I have updated core and Supervisor. I tried loading the bare template, and had the same fail as above.
I then teried the MHz19 install:
INFO ESPHome 2024.4.1
INFO Reading configuration /config/esphome/esphome-web-540d80.yaml...
INFO Updating https://github.com/fornellas/esphome@mhz19_patches
INFO Generating C++ source...
INFO Compiling app...
Processing environmental (board: esp32-c3-devkitm-1; framework: arduino; platform: platformio/espressif32@5.4.0)
The problem
Compiling .pioenvs/esphome-web-camera/src/esphome/components/api/api_pb2_service.cpp.o
xtensa-esp32-elf-g++: error trying to exec 'as': execvp: No such file or directory
*** [.pioenvs/esphome-web-camera/src/esphome/components/api/api_frame_helper.cpp.o] Error 1
xtensa-esp32-elf-g++: error trying to exec 'as': execvp: No such file or directory
Which version of ESPHome has the issue?
2024.4.0
What type of installation are you using?
Docker
Which version of Home Assistant has the issue?
2024.4.2
What platform are you using?
ESP32
Board
ESP32-cam
Component causing the issue
No response
Example YAML snippet
Anything in the logs that might be useful for us?
Additional information
Is "as" in the PATH? This looks like https://community.home-assistant.io/t/esp32-wont-compile-xtensa-esp32-elf-g-internal-compiler-error-killed-program-cc1plus/490814
The text was updated successfully, but these errors were encountered: