/
README.rbp
97 lines (56 loc) · 2.34 KB
/
README.rbp
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
This buildroot is for xbmc development for the Raspberry PI.
The buildroot is based on upstream buildroot git : bce34ab199dea7e8430971ae31d743e246049785
Requirements for ubuntu :
apt-get install build-essential libssl-dev git libncurses-dev bison flex texinfo zlib1g-dev gettext autoconf patch
Getting buildroot :
mkdir /opt/xbmc-bcm
cd /opt/xbmc-bcm
export BUILDROOT=/opt/xbmc-bcm/buildroot
git clone https://github.com/huceke/buildroot-rbp.git buildroot
Building buildroot :
cd $BUILDROOT
make rbp_defconfig
make
Output of buildroot is located at :
$BUILDROOT/output/images/
There you find the necessary binary files and the rootfs for the PI.
Prepare the nfs exports :
mkdir -p /opt/bcm-rootfs
mkdir -p /opt/xbmc-bcm/xbmc-bin
cd /opt/bcm-rootfs
tar -xpf $BUILDROOT/output/images/rootfs.tar
Edit etc/fstab and add the nfs mounts :
Edit /etc/exports and add
/opt/bcm-rootfs 192.168.1.0/24(rw,no_root_squash,no_subtree_check,async)
/opt/xbmc-bcm/xbmc-bin 192.168.1.0/24(rw,no_root_squash,no_subtree_check,async)
Reread exports :
exportfs -r
Partition a sd card with the following partitions :
1 -> FAT
2 -> Linux root
3 -> Linux swap
Copy $BUILDROOT/output/images/{bootcode.bin,cmdline.txt.example,loader.bin,start.elf} onto the FAT partition.
Rename cmdline.txt.example to cmdline.txt.
Edit cmdline.txt and change the settings to your needs.
otg.lpm_enable=0 console=ttyAMA0,115200 kgdboc=ttyAMA0,115200 console=tty1 nfsroot=192.168.1.2:/opt/bcm-rootfs ip=192.168.1.3:192.168.1.2:192.168.1.1:255.255.255.0 rootwait smsc95xx.macaddr=08:00:24:00:60:03 quiet
Here 192.168.1.2 is the nfs server ip address. 192.168.1.3 is the ip address of the PI. 192.168.1.1 is the DNS server.
Getting xbmc :
cd /opt/xbmc-bcm
git clone https://github.com/xbmc/xbmc-rbp.git
cd /opt/xbmc-bcm/xbmc
vi tools/rbp/setup-sdk.sh
Change the buildroot location after "USE_BUILDROOT==1" case to :
BUILDROOT=/opt/xbmc-bcm/buildroot
Run tools/rbp/setup-sdk.sh
sh tools/rbp/setup-sdk.sh
make -C tools/rbp/depends/xbmc
make
make install
Xbmc binaries and depends are install in /opt/xbmc-bcm/xbmc-bin.
Buildroot hints :
User : root
Password : xbmc
If libnfs fails to build :
rm -rf rm -rf output/build/libnfs-345422a2e32b22119054224003655468771b15fc
make libnfs
make