uicth11.clo

% This is the default font size dependent style option file for use
% with the UICTHESI STY style file for thesis formatting at UIC.
% To use it please enter the line \verb+\documentstyle{uicthesi}+.
% This file an adoptation of the Report Document style for
% \LaTeX\ version 2.09 Copyright (C) 1988 by Leslie Lamport and
% for use with the new Font Selection Scheme that accompanied \TeX\
% version 3.1 at UIC.
%
% First Edition:
% Paul Davis, UIC Computer Center, 31 December 1991.
%
% Changes to this file:
%  (should be described here)
%  (remember to update the filedate and fileversion as needed.)
%
% Changed \itemsep to 0. Formerly, the extra space resulted in
%   triple-spacing in list environments.
% Paul Davis, UIC Computer Center, 8 Jun 1992.(b)
%
% This file has been updated to work under \LaTeX\ version 2e.
% Wherever possible or necessary I have substituted the appropriate
% \LaTeX\ version 2e command for the old commands that didn't work.
% As I started this project with little prior knowledge there may
% be bugs or other mistakes, so please feel free to add corrections
% and enhancements as seen fit. I used the University of California
% thesis style class ucthesis.cls and associated files as guides in
% this effort. Those are available from any CTAN archive.
%
% Thomas McKibben, UIC Dept. of Physics, January 1996.
%
%
% First, announce ourselves.

\typeout{Loading uicth11.clo...}

\renewcommand{\normalsize}{\fontsize\@xipt{13.6}\selectfont%
\abovedisplayskip 11\p@ plus3\p@ minus6\p@
\belowdisplayskip \abovedisplayskip
\abovedisplayshortskip  \z@ plus3\p@   
\belowdisplayshortskip  6.5\p@ plus3.5\p@ minus3\p@
\let\@listi\@listI}   % Setting of \@listi added 9 Jun 87

\newcommand{\small}{\fontsize\@xpt{12}\selectfont%
\abovedisplayskip 10\p@ plus2\p@ minus5\p@
\belowdisplayskip \abovedisplayskip
\abovedisplayshortskip  \z@ plus3\p@   
\belowdisplayshortskip  6\p@ plus3\p@ minus3\p@
\def\@listi{\leftmargin\leftmargini %% Added 22 Dec 87
\topsep 6\p@ plus2\p@ minus2\p@\parsep 3\p@ plus2\p@ minus\p@
\itemsep \parsep}}

 
\def\footnotesize{
   \@setsize\footnotesize{11pt}\ixpt\@ixpt
   \abovedisplayskip 8pt plus 2pt minus 4pt
   \belowdisplayskip \abovedisplayskip
   \abovedisplayshortskip \z@ plus 1pt
   \belowdisplayshortskip 4pt plus 2pt minus 2pt
   \def\@listi{
      \leftmargin\leftmargini
      \topsep 4pt plus 2pt minus 2pt
      \parsep 2pt plus 1pt minus 1pt
      \itemsep 0pt}}
 
\def\scriptsize{
   \@setsize\scriptsize{9.5pt}\viiipt\@viiipt}
\def\tiny{
   \@setsize\tiny{7pt}\vipt\@vipt}
\def\large{
   \@setsize\large{14pt}\xiipt\@xiipt}
\def\Large{
   \@setsize\Large{18pt}\xivpt\@xivpt}
\def\LARGE{
   \@setsize\LARGE{22pt}\xviipt\@xviipt}
\def\huge{
   \@setsize\huge{25pt}\xxpt\@xxpt}
\def\Huge{
   \@setsize\Huge{30pt}\xxvpt\@xxvpt}
\normalsize
%    \end{macrocode}
% \section{Floats}
% A float is something like a figure or table.
%
% \subsection{Floats on a Text Page}
%    \begin{macrocode}
\floatsep 60pt plus 2pt minus 2pt     % Space between adjacent floats
                                      % moved to top or bottom of text
                                      % page.
\textfloatsep 60pt plus 2pt minus 4pt % Space between main text and
                                      % floats at top or bottom of page.
\intextsep 60pt plus 2pt minus 2pt    % Space between in-text figures and
                                      % text.
%\@maxsep 75pt                         % The maximum of \floatsep,
                                      % \textfloatsep and \intextsep
                                      % (minus the stretch and shrink).
%    \end{macrocode}
% \subsection{For Floats on a Separate Float Page}
%    \begin{macrocode}
\@fptop 0pt plus 1fil    % Stretch at top of float page/column. (Must be
                         % 0pt plus ...)
\@fpsep 60pt plus 2fil   % Space between floats on float page/column.
\@fpbot 0pt plus 1fil    % Stretch at bottom of float page/column. (Must
                         % be 0pt plus ... )
%    \end{macrocode}
% \subsection{Marginal Notes}
%    \begin{macrocode}
\marginparpush 5pt       % Minimum vertical separation between two marginal
                         % notes.
%    \end{macrocode}
% \section{Paragraphing}
%    \begin{macrocode}
\parskip 0pt plus 1pt              % Extra vertical space between paragraphs.
\parindent 17pt                    % Width of paragraph indentation.
\partopsep 3pt plus 1pt minus 2pt  % Extra vertical space, in addition to
                                   % \verb+\parskip+ and \verb+\topsep+, added w
                                   % leaves blank line before environment.
%    \end{macrocode}
% See \verb+\@listI+ for values of \verb+\topsep+ and \verb+\itemsep+.
% The following page-breaking penalties are defined
%    \begin{macrocode}
 
\@lowpenalty   51      % Produced by \nopagebreak[1] or \nolinebreak[1]
\@medpenalty  151      % Produced by \nopagebreak[2] or \nolinebreak[2]
\@highpenalty 301      % Produced by \nopagebreak[3] or \nolinebreak[3]
 
\@beginparpenalty -\@lowpenalty    % Before a list or paragraph environment.
\@endparpenalty   -\@lowpenalty    % After a list or paragraph environment.
\@itempenalty     -\@lowpenalty    % Between list items.
%    \end{macrocode}
 
% \verb+\clubpenalty+         % 'Club line'  at bottom of page.
% \verb+\widowpenalty+        % 'Widow line' at top of page.
% \verb+\displaywidowpenalty+ % Math display widow line.
% \verb+\predisplaypenalty+   % Breaking before a math display.
% \verb+\postdisplaypenalty+  % Breaking after a math display.
% \verb+\interlinepenalty+    % Breaking at a line within a paragraph.
% \verb+\brokenpenalty+       % Breaking after a hyphenated line.
%
% \section{Lists}
%
% The following commands are used to set the default values for the list
% environment's parameters. See the \LaTeX\ manual for an explanation of
% the meanings of the parameters.  Defaults for the list environment are
% set as follows.  First, \verb+\rightmargin+, \verb+\listparindent+
% and \verb+\itemindent+ are set to 0pt.
% Then, for a Kth level list, the command \verb+\@listK+ is
% called, where 'K' denotes 'i', 'ii', ... , 'vi'.
% (I.e., \verb+\@listiii+ is called for a third-level list.)
% By convention, \verb+\@listK+ should set
% \verb+\leftmargin+ to \verb+\leftmarginK+.
%
% For efficiency, level-one list's values are defined at top level, and
% \verb+\@listi+ is defined to set only \verb+\leftmargin+.
%    \begin{macrocode}
 
\leftmargini 2.5em
\leftmarginii 2.2em
\leftmarginiii 1.87em
\leftmarginiv 1.7em
\leftmarginv 1em
\leftmarginvi 1em
 
\leftmargin\leftmargini
\labelsep .5em
\labelwidth\leftmargini\advance\labelwidth-\labelsep
%    \end{macrocode}
% \verb+\@listI+ defines top level and \verb+\@listi+ values of
% \verb+\leftmargin+, \verb+\topsep+, \verb+\parsep+, and \verb+\itemsep+
%    \begin{macrocode}
\def\@listI{\leftmargin\leftmargini \parsep 4.5pt plus 2pt minus 1pt%
\topsep 9pt plus 3pt minus 5pt%
\itemsep 0pt plus 2pt minus 1pt}
 
\let\@listi\@listI
\@listi
 
\def\@listii{\leftmargin\leftmarginii
   \labelwidth\leftmarginii\advance\labelwidth-\labelsep
   \topsep 4.5pt plus 2pt minus 1pt
   \parsep 2pt plus 1pt minus 1pt
   \itemsep 0pt}
 
\def\@listiii{\leftmargin\leftmarginiii
    \labelwidth\leftmarginiii\advance\labelwidth-\labelsep
    \topsep 2pt plus 1pt minus 1pt
    \parsep \z@ \partopsep 1pt plus 0pt minus 1pt
    \itemsep 0pt}
 
\def\@listiv{\leftmargin\leftmarginiv
     \labelwidth\leftmarginiv\advance\labelwidth-\labelsep}
 
\def\@listv{\leftmargin\leftmarginv
     \labelwidth\leftmarginv\advance\labelwidth-\labelsep}
 
\def\@listvi{\leftmargin\leftmarginvi
     \labelwidth\leftmarginvi\advance\labelwidth-\labelsep}
%    \end{macrocode}

%
% BEGIN DEFINITIONS
%
% \subsubsection{Generic Bold Definition}
% This defines a generic bold default series to be used in the definition for
% chapter for example. This definition will cause an emphasized word
% in the title section to be printed in slanted bold instead of roman bold.
% Only works with the new font definition scheme!
%    \begin{macrocode}
%\def\transparentbold{\def\default@series{bx}\bf}
%    \end{macrocode}
\def\transparentbold{\bfseries} % TMcK 1996
%
% \subsubsection{Underlining}
% Hey, it works!
%    \begin{macrocode}
\newbox\ustrutbox
 
\setbox\ustrutbox=\hbox{\vrule height8.5pt depth3.2pt width0pt}
 
\def\ustrut{\relax\ifmmode\copy\ustrutbox\else\unhcopy\ustrutbox\fi}
 
\def\underl#1 {\leavevmode\let\first=\relax\underli #1 }
\def\underli#1 {\ifx&#1\let\next=\relax\unskip
  \else\let\next=\underli\first\ulinebox{#1}\fi\let\first=\undersp\next}
\def\undersp{\penalty50\ulinebox{\space}\penalty50}
\def\ulinebox#1{\vtop{\hbox{\ustrut#1}\hrule}}
%    \end{macrocode}


% \section{Definitions}
% The next line defines a flag to detect
% when we started the body, the chapter macro (numbered) checks this flag.
% If it was false it changes to arabic pagenumbering and sets it to one.
% If it is already true it does not do anything.
%    \begin{macrocode}
\newif\if@startedbodyyet\@startedbodyyetfalse
\newif\if@startedappendices\@startedappendicesfalse
\newif\if@multappendices\@multappendicesfalse
\newif\if@isatable\@isatablefalse
\newif\if@nowarning       % New if to test if we need to issue a
\@nowarningtrue           % warning during footnote placement.
\newif\if@bibforma\@bibformafalse
\newcount\c@fnref
\newcount\out@fnpage@count
\out@fnpage@count=1
\newif\ifabseqnumbering\abseqnumberingfalse
 
\def\today{\ifcase\month\or
  January\or February\or March\or April\or May\or June\or
  July\or August\or September\or October\or November\or December\fi
  \space\number\day, \number\year}
%    \end{macrocode}

% \subsubsection{Page Numbering at Top}
% In this section we will redefine the running title, so that only the
% page number is printed. This can be achieved with a pagestyle which
% only prints the page at the top (like plain prints at the bottom).
%    \begin{macrocode}
\def\ps@pageontop{
   \def\@oddhead{\rmfamily\hfil\thepage}
   \let\@evenhead\@oddhead
   \def\@oddfoot{}
   \let\@evenfoot\@oddfoot}
%    \end{macrocode}
%
% \subsubsection{Page Numbering at Bottom}
%    \begin{macrocode}
\def\ps@pageonbottom{
   \def\@oddhead{}
   \def\@evenhead{}
   \def\@oddfoot{\rmfamily\hfil\thepage\hfil}
   \let\@evenfoot\@oddfoot}
%    \end{macrocode}
%

%
% END DEFINITIONS
%

%
% BEGIN PAGE LAYOUT
%
% \section{Page Layout}
% \subsection{Page Definition}
% Now, lets do the page settings.
% Margins are 1.25 inch on the left side and 1 inch on the right.
%    \begin{macrocode}
\oddsidemargin=0.25in
\evensidemargin=0.25in
\textwidth=6.25in
\def\innerheadskip{12pt}
\headheight=32pt
\headsep=30pt                  % area between the heading and the text
\footskip=20pt
\textheight=9in                % height of the physical page
\advance \textheight by -\headheight
\advance \textheight by -\headsep
\advance \textheight by -\footskip
\mark{{}{}}                    % Initializes TeX's marks
%\@twosidefalse                 % Default is one-sided printing.
\pagestyle{pageonbottom}
\pagestyle{plain}
\pagenumbering{roman}
%    \end{macrocode}
%
% The pagenumbering is set to roman because that is what the preliminary
% pages should be numbered with.
%    \begin{macrocode}
\@afterindenttrue
\looseness=1
\clubpenalty=10000
\widowpenalty=10000
\displaywidowpenalty=10000
\raggedbottom
%    \end{macrocode}
%
% \subsection{Line Spacing}
% Set up double spacing
%    \begin{macrocode}
\def\baselinestretch{2}
%    \end{macrocode}
%
% New command \verb+\setstretch+ (slightly more mnemonic...
% and easier to type)
%    \begin{macrocode}
\def\setstretch#1{\renewcommand{\baselinestretch}{#1}}
%    \end{macrocode}
%
% A single spaced quote (say) is done by surrounding singlespace with quote.
%    \begin{macrocode}
\def\singlespace{
   \vskip\parskip\vskip\baselineskip
   \def\baselinestretch{1}
   \baselineskip\f@baselineskip\relax
   \baselineskip\baselinestretch\baselineskip
   \setbox\strutbox\hbox{
      \vrule\@height.7\baselineskip\@depth.3\baselineskip \@width\z@}
   \normalbaselineskip\baselineskip
   \glb@settings \the\every@math@size
   \aftergroup\glb@settings
   \vskip-\parskip
   \vskip-\baselineskip}
 
\def\endsinglespace{\par}
%    \end{macrocode}
%
%  Spacing, doublespace and onehalfspace all are meant to INCREASE the
%  spacing (i.e. calling onehalfspace from within doublespace will not
%  produce a graceful transition between spacings)
%    \begin{macrocode}
\def\spacing#1{
   \par
   \def\baselinestretch{#1}
   \baselineskip\f@baselineskip\relax
   \baselineskip\baselinestretch\baselineskip
   \setbox\strutbox\hbox{
      \vrule\@height.7\baselineskip\@depth.3\baselineskip \@width\z@}
   \normalbaselineskip\baselineskip
   \glb@settings \the\every@math@size
   \aftergroup\glb@settings
   \vskip-\parskip
   \vskip-\baselineskip}
 
\def\endspacing{
   \par
   \vskip \parskip
   \vskip \baselineskip
   \endgroup
   \vskip -\parskip
   \vskip -\baselineskip
   \begingroup}
 
\def\onehalfspace{\spacing{1.5}}
\let\endonehalfspace=\endspacing
 
\def\doublespace{\spacing{2}}
\let\doublespace=\endspacing
%    \end{macrocode}
%
% Fix up spacing before and after displayed math
% (arraystretch seems to do a fine job for inside LaTeX displayed math,
% since array and eqnarray seem to be affected as expected)
% Changing \baselinestretch and doing a font change also works if done here,
% but then you have to change @setsize to remove the call to @nomath)
%    \begin{macrocode}
\everydisplay{
   \abovedisplayskip \baselinestretch\abovedisplayskip
   \belowdisplayskip \abovedisplayskip
   \abovedisplayshortskip \baselinestretch\abovedisplayshortskip
   \belowdisplayshortskip \baselinestretch\belowdisplayshortskip}
%    \end{macrocode}
%
% \subsection{Running Titles}
% \subsubsection{Front Matter Continuation Headings}
% This is the page style needed to print the headers in subsequent pages
% of the front matter pages other than the table of contents and the
% lists of figures and tables.
% The line that has a \verb+\vbox to 24pt{}+
% was set to use the \verb+\baselineskip+ but the baselineskip is set
% to zero and therefore cannot be used.
%    \begin{macrocode}
\def\ps@continued{
   \def\@oddhead{\headmark}
   \let\@evenhead\@oddhead
   \def\@oddfoot{\rmfamily\normalsize\hfil\thepage\hfil}
   \let\@evenfoot\oddfoot}
%    \end{macrocode}
%
% \subsubsection{Appendix Continuation Headings}
% This is the page style needed to print the headers in subsequent pages
% of the appendix.
%    \begin{macrocode}
\def\ps@appendixcontinued{
   \def\@oddhead{\headmark}
   \let\@evenhead\@oddhead
   \def\@oddfoot{}
   \let\@evenfoot\oddfoot}
%    \end{macrocode}
%
% END PAGE LAYOUT
%