Skip to content

Latest commit

 

History

History
278 lines (246 loc) · 14.4 KB

CHANGELOG.md

File metadata and controls

278 lines (246 loc) · 14.4 KB

tsMuxeR 2.6.16

  • Fixed a an issue so that Dolby Vision EL stream type is now correct
  • Fixed a bug with HEVC streams when an HDR10+ SEI payload is too short
  • Fixed a bug where the first 2 frames of the first video track are muxed before anything else
  • Introduced an improvement so Single Track Double Layer files now can properly handled
  • Fixed a bug so that if no MOOF atom is met we stop atom parsing at the next MDAT atom
  • Fixed an issue with HDR flags, so we only set them if an HEVC stream is detected
  • Introduced correct ATSC descriptor for pure EAC3 tracks
  • Introduced correct HDMV TS descriptors for MPEG-2 streams
  • Fixed an issue where Blu-Ray movies will loop rather than stopping after reading
  • Introduced being able to include Dolby Vision descriptors in TS or M2TS mode
  • Fixed the order of streams so that video streams always come first
  • Introduced a GUI option for adjusting PIP transparency
  • Fixed an issue where translated strings appeared in the meta file
  • Fixed a bug in the output paths of the MXE build scripts
  • Ensured we keep M2TS descriptors in TS files (temporary until a long-term solution can be found)
  • Fixed a bug where filenames were being truncated prematurely if there were dots in the filename
  • Introduced putting overnight builds into OBS, to build for various Linux platforms
  • Improved the documentation to fix a broken URL for the test files
  • Introduced a simplification of the method used to play sounds in the GUI
  • Fixed an issue with broken ISO labels when using non-ASCII characters
  • Introduced a refactoring that moved the About page into an external HTML file for the GUI
  • Introduced a code cleanup that removed all usages of std::wstring
  • Fixed an issue with incorrect subtitle spacing on Windows
  • Introduced support for M4V files
  • Fixed issue with subtitle timestamps when joining multiple M2TS files together
  • Fixed incorrect usage of POSIX APIs in Windows builds
  • Fixed a bug with encoding errors when dealing with SSIF files
  • Fixed a bug where we could read over the end of an MP4 file
  • Introduced keeping the track order when multiple video tracks are added
  • Introduced support for reading fragmented MP4 files
  • Introduced support for specific AVC and HEVC descriptors in TS files
  • Introduced support for Dolby Vision atoms in AVC or HEVC streams
  • Introduced a changelog and improved general documentation
  • Fixed an issue with garbled subtitles being displayed
  • Introduced translation support, as well as a full Russian translation of the GUI
  • Introduced getting the HDR10 information from the SPS VUI in HEVC
  • Introduced detection of UTF8 in subtitle files
  • Fixed usage of WinMain, which lead to issues with console output on Windows
  • Introduced converting meta files using active code page if UTF8 fails
  • Improved the documentation for building with Msys2
  • Fixed bugs in the handling of non-ASCII characters in paths on Windows
  • Fixed bugs in subtitles PIDs for BD V3 M2TS with HDR
  • Fixed bug with the display of bitrate and channel numbers for EAC3 and AC3 tracks
  • Fixed bug with GUI not correctly allowing to select DTS Express 24-bit as a secondary track
  • Introduced an error message when an output file longer than 255 characters and reduced overall file length
  • Fixed bug where 3D plane information was showing for 2D BD-ROMs
  • Fixed a bug with uneven width between characters in subtitles on Mac and Linux
  • Introduced the ability to detect audio delays in MKV files
  • Fixed a bug where the 3D planes were not detected in specific cases
  • Fixed a bug with alignment of the subtitle tracks and 3D planes
  • Removed unnecessary floating point conversion code from the GUI source tree
  • Added support for frame rates of 50, 59.94 and 60
  • Fixed an issue with HDR10 HEVC streams where the maxCLL and maxFALL values were set incorrectly
  • Fixed typos and improved the clarity of certain wording in the GUI
  • Fixed typos and grammar issues with the readme and usage information
  • Introduced the git revision to the version string in the GUI and CLI
  • Introduced automatic selection of BD V3 for HEVC in GUI
  • Fixed an issue with compiling on Mac
  • Fixed an issue with the handling of wav64
  • Introduced a workaround for QTBUG-28893
  • Performed another round of GUI code cleanup
  • Introduced a uniform code formatting style
  • Fixed a bug with reading the FPS information from certain streams
  • Fixed a typo in the GUI settings for the font family setting
  • Introduced a warning when a V2 video format is used for a V3 Blu-ray
  • Fixed a bug with incorrect stream ID for TS stream
  • Fixed typos in the source files
  • Introduced UHD Blu-ray as an option in the GUI
  • Fixed a bug where invalid font files could crash tsMuxer
  • Fixed an issue with HEVC stream detection in the GUI
  • Introduced reading the FPS info from VPS or SPS, rather than VPS only
  • Fixed a bug with the CPI table I-frame thresholds with UHD
  • Introduced Dolby Vision support
  • Fixed compiler warnings on return value overflows
  • Fixed an issue with the stream ID being incorrectly set for BD V3
  • Fixed an issue when spaces where in the path to the temporary meta file in the GUI
  • Fixed an issue with buffer overflows on HEVC streams
  • Fixed an issue so that TS descriptors are the same as on commercial Blu-rays
  • Fixed an issue where numbers were shown instead of language codes in the GUI
  • Introduced nightly builds, hosted on Bintray
  • Fixed a bug where the tsMuxer executable could not be found on Windows in the GUI
  • Fixed a bug where muxing a SRT results in a segfault on Linux
  • Introduced support for UHD HDR10 and HDR10+
  • Introduced a migration from "override" to "virtual" keywords in the code to conform better to C++14
  • Introduced a migration from "QObject::connect" syntax to Qt5 equivalent in the GUI
  • Fixed an issue with the min and max functions when compiling on Windows
  • Fixed an issue calculating the AAC frame size
  • Introduced UHD (width >= 2600) support in the MPLS and CLPI
  • Introduced a clean up and reformatting of the documentation
  • Introduced UHD BD V3 support
  • Fixed an issue with EAC3 bitrate, sampling rate and channel information not being set correctly
  • Fixed a bug with parsing of AC3
  • Fixed an issue with the stream type not being set correctly for H265
  • Fixed an issue when parsing MP4 AAC 5.1 where the channel output is not read correctly
  • Fixed an issue with parsing the AAC frame length
  • Introduced an update of the C++ standard from 11 to 14
  • Introduced a cleanup of precompiled headers
  • Introduced using std::thread for the TerminatableThread in libmediation
  • Introduced cross-platform CMake build system
  • Introduced a cleanup of libmediation that removed condvar, mutex and time from the library
  • Introduced a translation of comments from Russian to English
  • Introduced a migration from Qt4 to Qt5

tsMuxeR 2.6.15

  • Fixed mkv parser a bit. I've got unparsed file example

tsMuxeR 2.6.13

  • update SEI correction: do not correct SPS/PPS if stream contains different PPS with same pps_id

tsMuxeR 2.6.12

  • several minor bugs fixed

tsMuxeR 2.6.11

  • fixed saving UI settings to a registry. Also, if file tsMuxerGUI.ini found, UI will switch settings to an ini file instead of registry (you can create empty ini file at the beginning).
  • UI: change control for cut start/end time
  • fixed SEI processing for 'force' mode ( it doesn't work correctly for some movies)
  • fixed bug in the wav demuxer (first audio frame has mixed up channels)
  • fixed timings for PG streams. Timings was inaccurate for amount of several ms (for some movies only, it depended of the first PTS of the file)

tsMuxeR 2.6.9

  • inserting SEI did not work for some H.264 stream at all
  • add more correction for VUI parameters if option insert SEI is active (it helps to open some H.264 streams in the Scenarins and solve PS3 problem for some sources)
  • fixed channels for 7.1 and 7.0 wav files
  • fixed combined H.264 streams read from Elementary Stream
  • BD Bitrate control improved a little bit

tsMuxeR 2.6.4

  • Add secondary video support
  • fixed mp4 files with MPEG-DASH
  • fixed SEI again
  • fixed DTS-ES recognition
  • fixed font renderer (a little bit wrong text position)
  • several minor improvments and bug fixes

tsMuxeR 2.5.7

  • fixed bug with SEI messages for some movie
  • fixed problem with some movies where problem occured during processing several last video frames
  • several minor bug fixes

tsMuxeR 2.5.5

  • add HEVC video codec support
  • UI improvment: Save settings for General tab, Subtitles tab and last output folder
  • Fixed file duration detection for ssif and some m2ts files
  • Fixed bug if mux playlist and several sup files (it is a very olg bug, but it became much more often since 2.4.x)
  • Several minor bug fixes

tsMuxeR 2.4.0

  • Add secondary audio support for bluray muxing. Due to standart It is allowed only for DTS-Express and DD+ codecs.
  • Filter out H.264 filler packets
  • UI improvment: option for MPLS offset can be entered either as time or as 45Khz clock value
  • UI improvment: UI displays opened file duration
  • UI improvment: chapter list correctly updated if join several files. Also joining for MPLS is enabled.
  • Add help if run tsMuxeR without parameters
  • Fixed muxing for 96Khz TRUE-HD tracks
  • PCM inside VOB was anonced before, but actually did not work. Fixed.
  • UI fix: if open MPLS, then close, track list is not cleared. It is broken in previous build only.
  • Subtitles renderer fixed (broken in previous build only after in/out effects)

tsMuxeR 2.3.2

  • Support PG subtitles inside MKV
  • Support MKV tracks with zlib compression
  • Support 3D MP4 and MOV files (combined AVC+MVC stream)
  • Add option 'line spacing' to subtitles renderer
  • Add fade in/out effect to subtitles renderer
  • Fixed ability to drag&drop files directly to tsMuxerGUI shurtcut (it worked before in version 10.6)
  • Fixed splitting operation if no video track present
  • bug fixed: tsMuxeR can't create output directory for UNC path (for instance \.\Volume{E5FB13D8-5096-11E3-B9C4-005056C00008}\folder1\test.ts)
  • bug fixed: message "file already exist" appeared if open several files from a folder with '(' in the name

tsMuxeR 2.2.3

  • Add support for DTS-HD elementary stream with extra DTSHD headers
  • Add support for mkv with 'Header Stripping' compression
  • Add 3D MKV support
  • Add PCM inside MKV support
  • Add PCM inside VOB support
  • Fixed option 'bind to video fps' for subtitles
  • Improved font renderer quality
  • Fixed file splitting option (it was disabled since v.1.11.x because of was not implemented for ISO and 3D-blurays)
  • Several minor bug fixes

tsMuxeR 2.1.8

  • Fixed join files problem with True-HD track
  • introduce MAC build

tsMuxeR 2.1.6

  • Add support for combined AVC+MVC streams
  • Output file size slightly reduced
  • Fixed bug if mux AVC+MVC tracks to m2ts file. Some 3d m2ts movies did not play on Samsung Smart TV
  • Fixed minor bug in a SSIF interleaving for some movies
  • introduce Linux build

tsMuxeR 2.1.4

  • Same problem fixed again. Sometimes tsMuxeR get access to file with wrong name during mpls processing.

tsMuxeR 2.1.3

  • Previous version introduce a new bug. Sometime tsMuxeR showed error message "file not found". Fixed.

tsMuxeR 2.1.2(b);

  • fixed bug in MVC stream recognition. MVC from Intel Media Encoder now work.

  • SSIF files is not required any more if you open 3D MPLS file

  • Add Stereo subtitles basic support. If source PG stream has stereo format, same stereo PG stream will be created in a output file

  • Add tag (or ) to srt parser. This tag force to show subtitle message. For instance:

    1 00:00:10,440 --> 00:00:20,375 Senator, we're making our final approach into Coruscant.

tsMuxeR 2.0.8:

  • fixed subtitles bug: "3d-plane" option was inaccessible for many disks

tsMuxeR 2.0.7:

improvments:

  • add control for select/unselect all tracks at once bug fixes:
  • extract ac3 core from e-ac3 track fixed
  • fixed option --m2tsOffset (was broken in version 2.x.x)
  • fixed 'bufer overflow' error message if simultaneously mux several m2ts files and one of them has PSG tracks only
  • fixed problem with too long file names in demux mode for large mpls files

tsMuxeR 2.0.6:

  • bug fixed: removing overlapped frames for HD audio fixed

tsMuxeR 2.0.5:

  • add direct ISO output

tsMuxeR 1.12.10:

  • fixed H.264 stream parser. Same fix as in previous version but more careful
  • fixed subtitles color selection in UI

tsMuxeR 1.12.10:

  • fixed H.264 stream parser. It cause video distortion for some movies.
  • add DTS-express support. Is not fully complete yet, tsMuxeR doesn't produce subpath for secondary audio

tsMuxeR 1.12.9:

  • fixed file join for mov/mp4
  • fixed bug in SEI unit processing (if enable options 'insert picture timing'). Bug may cause video distortion.
  • fixed distortion for VC1 codec if join several files
  • seamless audio fixed. Extra audio frame correctly removed.

tsMuxeR 1.12.6:

  • fixed 3d subtitles. Add ability to select 3D offset plane for subtitles
  • add new parameter '--start-time'. This parameter define time for first video frame in output file. This parameter is filled automatically (too keep same input time) if open MPLS file.
  • several more minor fixes in transport stream to improve Blu-ray compatibility
  • fixed E-AC3 codec

tsMuxeR 1.12.3:

  • fixed problem with ssif muxing
  • add addition check for 'insert picture timing' parameter. For MVC depended view used same value as for primary video stream
  • add new parameter to GUI and tsMuxeR core: 'right-eye'. Parameter is used for 3D blurays only. If parameter is set then MPEG-4 MVC Base view video used for Right eye. This parameter filled automatically in GUI if open MPLS file.

tsMuxeR 1.12.2:

  • add 3d bluray support. Bluray muxing activated automatically if MVC substream appears in input tracks. To reduce HDD space, tsMuxeR doesn't produce ssif file, only a couple of .m2ts files. ssif files can be creted on the fly in DVD fab using "create mini iso" menu item.
  • add ability to mux to ssif file directly. It is not supported in GUI, but you can provide .ssif file extension
  • fixed bugs in SEI message processing and add MVC sei message support
  • fixed several bugs in the Transport Stream to improve compatibility with Blu-ray standart.

tsMuxeR 1.11.6:

  • fixed bug in SSIF file demuxing. It cause a problem for subtitles tracks.

tsMuxeR 1.11.5:

  • added SSIF files support for blu-ray play lists (MPLS)

tsMuxeR 1.11.4:

  • detect language for audio/subtitle tracks fixed for SSIF files (it's work if ssif file is opened from Blu-ray disk structure)

tsMuxeR 1.11.3:

  • bug fixed in MVC parsing

tsMuxeR 1.11.0:

  • add support of SSIF files and MVC codec (3d Blu-ray compatibility)