image_types_socfpga.bbclass

inherit image_types

SDCARD_ROOTFS ?= "${DEPLOY_DIR_IMAGE}/${IMAGE_NAME}.rootfs.ext3"

# Boot partition size [in KiB]
IMAGE_ROOTFS_ALIGNMENT_cyclone5 ?= "2048"
IMAGE_ROOTFS_ALIGNMENT_arria5 ?= "2048"

BOOT_SPACE ?= "102400"

IMAGE_DEPENDS_sdcard = "parted-native:do_populate_sysroot \
                        dosfstools-native:do_populate_sysroot \
                        mtools-native:do_populate_sysroot \
                        virtual/kernel:do_deploy \
                        virtual/bootloader:do_deploy"

SDCARD_GENERATION_COMMAND_cyclone5 = "generate_28nm_sdcard"
SDCARD_GENERATION_COMMAND_arria5 = "generate_28nm_sdcard"

#
# Generate the boot image with the boot scripts and required Device Tree
# files
_generate_boot_image() {
	local boot_part=$1

	# Create boot partition image
	BOOT_BLOCKS=$(LC_ALL=C parted -s ${SDCARD} unit b print \
	                  | awk "/ $boot_part / { print substr(\$4, 1, length(\$4 -1)) / 1024 }")

	# mkdosfs will sometimes use FAT16 when it is not appropriate,
	# resulting in a boot failure from SYSLINUX. Use FAT32 for
	# images larger than 512MB, otherwise let mkdosfs decide.
	if [ $(expr $BOOT_BLOCKS / 1024) -gt 512 ]; then
		FATSIZE="-F 32"
	fi

	rm -f ${WORKDIR}/boot.img
	mkfs.vfat -n "${BOOTDD_VOLUME_ID}" -S 512 ${FATSIZE} -C ${WORKDIR}/boot.img $BOOT_BLOCKS

	mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin ::/${KERNEL_IMAGETYPE}

	# Copy boot scripts
	for item in ${BOOT_SCRIPTS}; do
		src=`echo $item | awk -F':' '{ print $1 }'`
		dst=`echo $item | awk -F':' '{ print $2 }'`

		mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/$src ::/$dst
	done

	# Copy device tree file
	if test -n "${KERNEL_DEVICETREE}"; then
		for DTS_FILE in ${KERNEL_DEVICETREE}; do
			DTS_BASE_NAME=`basename ${DTS_FILE} | awk -F "." '{print $1}'`
			if [ -e "${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb" ]; then
				kernel_bin="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${MACHINE}.bin`"
				kernel_bin_for_dtb="`readlink ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb | sed "s,$DTS_BASE_NAME,${MACHINE},g;s,\.dtb$,.bin,g"`"
				if [ $kernel_bin = $kernel_bin_for_dtb ]; then
					mcopy -i ${WORKDIR}/boot.img -s ${DEPLOY_DIR_IMAGE}/${KERNEL_IMAGETYPE}-${DTS_BASE_NAME}.dtb ::/${DTS_BASE_NAME}.dtb
				fi
			else
				bbfatal "${DTS_FILE} does not exist."
			fi
		done
	fi
}

generate_28nm_sdcard () {
	# Create partition table
	parted -s ${SDCARD} mklabel msdos
	parted -s ${SDCARD} unit KiB mkpart primary fat32 ${IMAGE_ROOTFS_ALIGNMENT} $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED})
	parted -s ${SDCARD} unit KiB mkpart primary $(expr  ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED}) $(expr ${IMAGE_ROOTFS_ALIGNMENT} \+ ${BOOT_SPACE_ALIGNED} \+ $ROOTFS_SIZE)
	parted -s ${SDCARD} unit KiB mkpart primary 1024 2048

	#set part 3 to type a2 for spl / uboot image
	echo -ne "\xa2" | dd of=${SDCARD} bs=1 count=1 seek=482 conv=notrunc


	if [ -e "${DEPLOY_DIR_IMAGE}/${SPL_BINARY}-${UBOOT_CONFIG}" ]
	then
            dd if=${DEPLOY_DIR_IMAGE}/${SPL_BINARY}-${UBOOT_CONFIG} of=${SDCARD} conv=notrunc seek=1 bs=$(expr 1024 \* 1024)
	elif [ -e "${DEPLOY_DIR_IMAGE}/${SPL_BINARY}-${UBOOT_CONFIG}" ]
	then
            dd if=${DEPLOY_DIR_IMAGE}/${SPL_BINARY} of=${SDCARD} conv=notrunc seek=1 bs=$(expr 1024 \* 1024)
	else
            bbfatal "${SPL_BINARY} does not exist."
	fi

	parted ${SDCARD} print

	_generate_boot_image 1
	# Burn Partition
	dd if=${WORKDIR}/boot.img of=${SDCARD} conv=notrunc,fsync seek=1 bs=$(expr ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
	dd if=${SDCARD_ROOTFS} of=${SDCARD} conv=notrunc,fsync seek=1 bs=$(expr ${BOOT_SPACE_ALIGNED} \* 1024 + ${IMAGE_ROOTFS_ALIGNMENT} \* 1024)
}

IMAGE_CMD_sdcard () {
	if [ -z "${SDCARD_ROOTFS}" ]; then
		bberror "SDCARD_ROOTFS is undefined. To use sdcard image from Freescale's BSP it needs to be defined."
		exit 1
	fi

	# Align boot partition and calculate total SD card image size
	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE} + ${IMAGE_ROOTFS_ALIGNMENT} - 1)
	BOOT_SPACE_ALIGNED=$(expr ${BOOT_SPACE_ALIGNED} - ${BOOT_SPACE_ALIGNED} % ${IMAGE_ROOTFS_ALIGNMENT})
	SDCARD_SIZE=$(expr ${IMAGE_ROOTFS_ALIGNMENT} + ${BOOT_SPACE_ALIGNED} + $ROOTFS_SIZE + ${IMAGE_ROOTFS_ALIGNMENT})

	# Initialize a sparse file
	if [ "x${UBOOT_CONFIG}" != "x" ]
	then
		SDCARD_NAME="${IMAGE_NAME}-${UBOOT_CONFIG}.rootfs.sdcard"
	else
		SDCARD_NAME="${IMAGE_NAME}.rootfs.sdcard"
	fi
	SDCARD="${DEPLOY_DIR_IMAGE}/${SDCARD_NAME}"
	dd if=/dev/zero of=${SDCARD} bs=1 count=0 seek=$(expr 1024 \* ${SDCARD_SIZE})
	rm -f ${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.sdcard
	ln -s ${SDCARD_NAME} ${DEPLOY_DIR_IMAGE}/${IMAGE_LINK_NAME}.sdcard

	${SDCARD_GENERATION_COMMAND}
}

# The sdcard requires the rootfs filesystem to be built before using
# it so we must make this dependency explicit.
IMAGE_TYPEDEP_sdcard = "${@d.getVar('SDCARD_ROOTFS', 1).split('.')[-1]}"