Problem with Console and Kiauh shell_command Extension

[Dalinaffeti]

Hi i am new to Mainsail. I want to launch a python script with the shell_command extension of Kiauh. But with simple tests like 'echo hello world' i have no outputs on the console. In the screenshot below you can find what i am talking about. Every help will be appreciate.

The problem is i dont know which is causing this is it the Kiauh or the MainsailOS

[Dalinaffeti]

i forgot to add a screenshot of the content of my shell_command file:

[meteyou]

An echo will not be displayed in the console because the output has nothing to do with the Klipper console.

And it's not recommended to use sudo commands with it...

[Dalinaffeti]

did you use the kiauh shell_command extension with mainsail before?

[meteyou]

yes

[meteyou]

(and it is not an extension... is more like a "hack". If it is possible without this "module", I would not use it...)

[Dalinaffeti]

because i followed a youtube video on how to use it and in the video when gives a makro like hello_world it will be shown on the console.

It is shown at 5:11
https://www.youtube.com/watch?v=qkn3Su7QCpk&t=313s

[Dalinaffeti]

because i followed a youtube video on how to use it and in the video when gives a makro like hello_world it will be shown on the console.

It is shown at 5:11 https://www.youtube.com/watch?v=qkn3Su7QCpk&t=313s
unfortunately i didnt found examples on how it works

[meteyou]

ok. let me test today evening something.

[Dalinaffeti]

i solved the console and the shell_command thing :)

[meteyou]

what was the issue?

[Dalinaffeti]

it was the mcu. I flashed the firmware to use the raspberryPi as an mcu

[meteyou]

yes. Klipper needs a MCU to start. without any MCU, it will not execute any Gcode.