Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

build failure occurs while building for multiple target arch #20

Open
joshuaimmanuel opened this issue Dec 27, 2016 · 0 comments
Open

Comments

@joshuaimmanuel
Copy link

joshuaimmanuel commented Dec 27, 2016

when building for multiple architecture (say i586 and x86_64) go-cross:do_populate_sysroot fails with the following error

ERROR: go-cross-1.7.3-r0 do_populate_sysroot: The recipe go-cross is trying to install files into a shared area when those files already exist. Those files and their manifest location are:
   /home/joshua/work/projects/ri/yocto/build/tmp/sysroots/x86_64-linux/sysroot-providers/go-cross
 Matched in b'manifest-x86_64_i586-go-cross.populate_sysroot'
Please verify which recipe should provide the above files.
The build has stopped as continuing in this scenario WILL break things, if not now, possibly in the future (we've seen builds fail several months later). If the system knew how to recover from this automatically it would however there are several different scenarios which can result in this and we don't know which one this is. It may be you have switched providers of something like virtual/kernel (e.g. from linux-yocto to linux-yocto-dev), in that case you need to execute the clean task for both recipes and it will resolve this error. It may be you changed DISTRO_FEATURES from systemd to udev or vice versa. Cleaning those recipes should again resolve this error however switching DISTRO_FEATURES on an existing build directory is not supported, you should really clean out tmp and rebuild (reusing sstate should be safe). It could be the overlapping files detected are harmless in which case adding them to SSTATE_DUPWHITELIST may be the correct solution. It could also be your build is including two different conflicting versions of things (e.g. bluez 4 and bluez 5 and the correct solution for that would be to resolve the conflict. If in doubt, please ask on the mailing list, sharing the error and filelist above.
ERROR: go-cross-1.7.3-r0 do_populate_sysroot: If the above message is too much, the simpler version is you're advised to wipe out tmp and rebuild (reusing sstate is fine). That will likely fix things in most (but not all) cases.
ERROR: go-cross-1.7.3-r0 do_populate_sysroot: Function failed: sstate_task_postfunc
ERROR: Logfile of failure stored in: /home/joshua/work/projects/ri/yocto/build/tmp/work/x86_64-linux/go-cross/1.7.3-r0/temp/log.do_populate_sysroot.21365
Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Labels
None yet
Projects
None yet
Development

No branches or pull requests

1 participant