Debian 12 Bookworm Support #1730

sunjam · 2023-02-11T18:38:21Z

For internal testing and notes. Do not expect support!!!!!! Please do report testing issues here.

Debian 12 support #1887

Debian 12 Bookworm - release schedule
June 10th release date from https://wiki.debian.org/DebianBookworm
Assume mid-2023 for formal stable.

theCalcaholic · 2023-06-14T06:55:21Z

@theoriginalguy Debian 12 is not supported by NCP yet. If you are upgrading manually, you are doing so on your own account (and things are likely to break).

I doubt that we will upgrade to Debian 12 until we have progressed on the ongoing architectural changes (i.e. containerizing most of the included services), because that will make system upgrades a lot less risky.

abmusse · 2023-08-05T00:48:37Z

I'm looking to run initial install of NCP. Should I opt for Debian 11 as of today since NCP does not support Debian 12 yet or will I be fine setting up NCP on a clean install on the latest Debian 12?

tom-i · 2023-08-06T13:20:13Z

I've tried it today on clean Debian 12 - bookworm (Armbian 23.5.1) and after commenting section about checking version install script crashed after dependancy issue due tu php-8.1 version.
So it looks that I have to w8 till you support bookworm.. :-(

tom-i · 2023-08-06T17:19:16Z

Finally, I’ve managed to do it myself :-)
Few problems occurs, but it was ok I’ve solve them without problem, mainly about different name of php libs, exfat utils and so on.
Some problem with installing and starting up dnsmasq service.
One issue after installing with activating, but this thread helped: NextCloudPlus not yet initialized, trying again in a few seconds
So actually I’m on NCP 27.0.1 on Debian 12 - Bookworm.

SHA-NDY · 2023-08-28T10:37:03Z

Finally, I’ve managed to do it myself :-) Few problems occurs, but it was ok I’ve solve them without problem, mainly about different name of php libs, exfat utils and so on. Some problem with installing and starting up dnsmasq service. One issue after installing with activating, but this thread helped: NextCloudPlus not yet initialized, trying again in a few seconds So actually I’m on NCP 27.0.1 on Debian 12 - Bookworm.

Would you share your modified script?

SHA-NDY · 2023-08-28T17:58:51Z

Meanwhile I upgraded from Bullseye to Bookworm. Everything seems to be fine. NC instance is reachable and all NCP settings are ok.

morgan-germain · 2023-10-15T09:23:38Z

Bookworm is now the default release with raspberry pi os. But NextcloudPi installer script fails to launch because of an "Error: distro not supported" message. I will try to bypass this check

theCalcaholic · 2023-10-18T15:00:24Z

NextcloudPi only supports Bullseye at this point. There are still a number of things that I need to address before working on support for Bookworm.

If you perform the update manually, you are free to do so, but keep in mind, that your setup might break during NCP updates and make sure to have good backups!

theCalcaholic · 2023-12-27T16:27:06Z

Update: If all goes well with the next releases, I see ourselves supporting Debian Bookworm in 2024-03

FloKoll · 2024-01-04T22:34:31Z

Thx for your efforts! I appreciate your work, but It feels not good to be without security updates for 3 months.

theCalcaholic · 2024-01-07T07:16:40Z

@FloKoll Debian bullseye has security support until 2024-05 (including May), so that shouldn't be the case :)

FloKoll · 2024-01-09T10:42:10Z

@theCalcaholic Thank you for replying to my post. Yes, but - as far as I understand it correctly - support for Nextcloud 25 expired in October 2023. That means there are no more security fixes coming. Probably tens of thousands or more Raspberry Pis can't upgrade easily to Netxcloud 26 or higher because of the PHP version in Bullseye, which - it seems to me - makes the whole thing a veritable security risk. But maybe my worries are unfounded?

theCalcaholic · 2024-01-09T13:26:39Z

@FloKoll NextcloudPi supports Nextcloud 27, though, except for the NCP docker container, which is discontinued.

FloKoll · 2024-01-09T20:46:08Z

@theCalcaholic I'm no expert, but the problem seems to be that all machines running Bullseye with php 7.4 are not offered the update to NC 26 at all. This should affect a lot of people who, like me, have their small server running at home. I could of course update to Bookworm, but I'm afraid that there will be problems with Nextcloudpi.

Best regards

theCalcaholic · 2024-01-09T21:08:59Z

@FloKoll NextcloudPi uses PHP 8.1 (from the sury repositories) currently, not 7.4. The PHP version will automatically be updated when updating nextcloud to v24 or later

FloKoll · 2024-01-09T21:18:28Z

@theCalcaholic Interesting! I have always worked with "sudo -u www-data php occ upgrade" and not with ncp-config. That will probably be the reason why PHP has not been pulled from the Sury repos. I'll try it with your tool. Thanks for your patience and advice.

FloKoll · 2024-01-12T22:15:07Z

@theCalcaholic Running nc-update-nextcloud
Upgrade cannot skip major versions. Please upgrade one major version at a time
Done. Press any key...

I read https://help.nextcloud.com/t/staying-up-to-date/126259 and tried it with the code 0. But it didn't work. At the moment my nc-version ist NextCloudPi 25.0.13 (Debian Bullseye)

FloKoll · 2024-01-12T22:31:14Z

Is there another code I could choose?

theCalcaholic · 2024-01-12T23:30:25Z

@FloKoll The updater doesn't currently support selecting the next major version automatically. Try putting 26.0.10, then 27.1.5 (or 0, which should update to 27.1.3 atm)

FloKoll · 2024-01-13T09:12:34Z

running nc-update-nextcloud
Current Nextcloud version 25.0.13.2
Available Nextcloud version 26.0.10
Download Nextcloud 26.0.10...
Back up current instance...
check free space...
Maintenance mode enabled
backup database...
backup files...
backup /var/www/nextcloud-bkp_20240113_1705107484.tar.gz generated
Maintenance mode disabled
Storing backup at '/var/www/nextcloud-bkp_20240113_1705107484-25.0.13.2.tar.gz'...
Install Nextcloud 26.0.10...
Fix permissions...
Upgrade...
This version of Nextcloud requires at least PHP 8.0
You are currently running 7.4.33. Please update your PHP version.Abort
Clean up...
Rolling back to backup /var/www/nextcloud-bkp_20240113_1705107484-25.0.13.2.tar.gz...
check free space...
extracting backup file /var/www/nextcloud-bkp_20240113_1705107484-25.0.13.2.tar.gz...
restore files...
restore database...
No datadir found in backup
Maintenance mode disabled
Starting scan for user 1 out of 4 [...]

@theCalcaholic It seems to me that the updater does not automatically fetch PHP 8.1 from the Sury repository. I understood you above to mean that this is what you intended.

theCalcaholic · 2024-01-13T11:20:09Z

@FloKoll huh, weird... Could you run DBG=X ncp-update 26.0.10 be post the output here?

FloKoll · 2024-01-14T08:52:44Z

@theCalcaholic Sure!

sudo DBG=X ncp-update 26.0.10
/usr/local/bin/ncp-update: line 5: set: -X: invalid option
set: usage: set [-abefhkmnptuvxBCHP] [-o option-name] [--] [arg ...]
INFO: updating to development branch '26.0.10'
Downloading updates
warning: Could not find remote branch 26.0.10 to clone.
fatal: Remote branch 26.0.10 not found in upstream origin
No internet connectivity

FloKoll · 2024-01-14T08:59:50Z

I am amazed that it says there is no internet connection available. The server is online and I can access it. App updates and ncp-updates also work without any problems. Perhaps useful additional information could be that in my case the DynDNS account is set up on the server itself and not on the router, as the combination of STRATO provider and AVM Fritzbox made this necessary.

theCalcaholic · 2024-01-14T12:58:22Z

@FloKoll Sorry, that was my autocorrect messing with me 🙈. The x is supposed to be lower case.
That, and the command was wrong, it's ncp-update-nc not ncp-update.

So the correct command would be DBG=x ncp-update-nc 26.0.10

FloKoll · 2024-01-14T15:49:01Z

@theCalcaholic

sudo DBG=x ncp-update-nc 26.0.10

VER=26.0.10
BIN=ncp-update-nc
source /usr/local/etc/library.sh
++ export CFGDIR=/usr/local/etc/ncp-config.d
++ CFGDIR=/usr/local/etc/ncp-config.d
++ export BINDIR=/usr/local/bin/ncp
++ BINDIR=/usr/local/bin/ncp
++ export NCDIR=/var/www/nextcloud
++ NCDIR=/var/www/nextcloud
++ export ncc=/usr/local/bin/ncc
++ ncc=/usr/local/bin/ncc
++ export NCPCFG=etc/ncp.cfg
++ NCPCFG=etc/ncp.cfg
+++ dpkg --print-architecture
++ export ARCH=arm64
++ ARCH=arm64
++ [[ arm64 =~ ^(armhf|arm)$ ]]
++ [[ arm64 == \a\r\m\6\4 ]]
++ ARCH=aarch64
++ [[ aarch64 == \a\m\d\6\4 ]]
++ export SYSTEMD_PAGER=
++ SYSTEMD_PAGER=
++ [[ -f etc/ncp.cfg ]]
++ export NCPCFG=/usr/local/etc/ncp.cfg
++ NCPCFG=/usr/local/etc/ncp.cfg
++ [[ -f /usr/local/etc/ncp.cfg ]]
+++ ps -p 1 --no-headers -o %c
++ [[ systemd == \s\y\s\t\e\m\d ]]
++ [[ -d /run/systemd/system ]]
++ [[ -d /run/systemd/system ]]
++ INIT_SYSTEM=systemd
++ export INIT_SYSTEM
++ command -v jq
+++ jq -r .nextcloud_version
++ NCLATESTVER=27.1.3
+++ jq -r .php_version
++ PHPVER=7.4
+++ jq -r .release
++ RELEASE=bullseye
++ grep -Eh '^deb ' /etc/apt/sources.list
++ grep bullseye-security
++ RELEASE=bullseye-security
++ command -v ncc
+++ ncc status
+++ grep version:
+++ awk '{ print $3 }'
++ NCVER=25.0.13.2
[[ 26.0.10 == '' ]]
[[ -f /.docker-image ]]
BASEDIR=/var/www
cd /var/www
++ get_nc_config_value datadirectory
++ sudo -u www-data php -r 'include("/var/www/nextcloud/config/config.php"); echo($CONFIG["datadirectory"]);'
DATADIR=/media/Daten-Festplatte/ncdata/data
ncc status
[[ -d /var/www/nextcloud-old ]]
[[ -d /var/www/nextcloud ]]
[[ -d /media/Daten-Festplatte/ncdata/data ]]
[[ 0 -eq 0 ]]
SUDO='sudo -u www-data'
++ sudo -u www-data php /var/www/nextcloud/occ status
++ awk '{ print $3 }'
++ grep version:
CURRENT=25.0.13.2
++ cut -d. -f1
MAJOR_CUR=25
++ cut -d. -f1
MAJOR_NEW=26
[[ 1 -gt 1 ]]
[[ 26 -ge 24 ]]
++ lsb_release -r
[[ Release: 11 =~ .*10 ]]
grep -qP '\d+.\d+.\d+'
grep -qP '\d+.\d+.\d+'
echo 'Current Nextcloud version 25.0.13.2'
Current Nextcloud version 25.0.13.2
echo 'Available Nextcloud version 26.0.10'
Available Nextcloud version 26.0.10
is_more_recent_than 26.0.10 25.0.13.2
local version_A=26.0.10
local version_B=25.0.13.2
++ cut -d. -f1
local major_a=26
++ cut -d. -f2
local minor_a=0
++ cut -d. -f3
local patch_a=10
++ cut -d. -f1
local major_b=25
++ cut -d. -f2
local minor_b=0
++ cut -d. -f3
local patch_b=13
'[' 25 -gt 26 ']'
'[' 25 -eq 26 ']'
'[' 25 -eq 26 ']'
return 0
is_more_recent_than 25.0.0 26.0.10
local version_A=25.0.0
local version_B=26.0.10
++ cut -d. -f1
local major_a=25
++ cut -d. -f2
local minor_a=0
++ cut -d. -f3
local patch_a=0
++ cut -d. -f1
local major_b=26
++ cut -d. -f2
local minor_b=0
++ cut -d. -f3
local patch_b=10
'[' 26 -gt 25 ']'
return 1
is_more_recent_than 8.1.0 7.4.0
local version_A=8.1.0
local version_B=7.4.0
++ cut -d. -f1
local major_a=8
++ cut -d. -f2
local minor_a=1
++ cut -d. -f3
local patch_a=0
++ cut -d. -f1
local major_b=7
++ cut -d. -f2
local minor_b=4
++ cut -d. -f3
local patch_b=0
'[' 7 -gt 8 ']'
'[' 7 -eq 8 ']'
'[' 7 -eq 8 ']'
return 0
is_docker
[[ -f /.dockerenv ]]
[[ -f /.docker-image ]]
[[ '' == 1 ]]
pgrep -cf cron.php
pgrep -cf cron.php
mysql nextcloud
trap cleanup EXIT
URL=https://download.nextcloud.com/server/releases/nextcloud-26.0.10.tar.bz2
echo 'Download Nextcloud 26.0.10...'
Download Nextcloud 26.0.10...
wget -q https://download.nextcloud.com/server/releases/nextcloud-26.0.10.tar.bz2 -O nextcloud.tar.bz2
BKPDIR=/var/www
WITH_DATA=no
COMPRESSED=yes
LIMIT=0
echo 'Back up current instance...'
Back up current instance...
set +eE
ncp-backup /var/www no yes 0
check free space...
Maintenance mode enabled
backup database...
backup files...
backup /var/www/nextcloud-bkp_20240114_1705240186.tar.gz generated
Maintenance mode disabled
RET=0
sync
set -eE
++ head -1
++ ls -1t /var/www/nextcloud-bkp_20240114_1705240186.tar.gz
BKP_=/var/www/nextcloud-bkp_20240114_1705240186.tar.gz
[[ -f /var/www/nextcloud-bkp_20240114_1705240186.tar.gz ]]
[[ 0 -ne 0 ]]
++ dirname /var/www/nextcloud-bkp_20240114_1705240186.tar.gz
++ basename /var/www/nextcloud-bkp_20240114_1705240186.tar.gz .tar.gz
BKP=/var/www/nextcloud-bkp_20240114_1705240186-25.0.13.2.tar.gz
echo 'Storing backup at '''/var/www/nextcloud-bkp_20240114_1705240186-25.0.13.2.tar.gz'''...'
Storing backup at '/var/www/nextcloud-bkp_20240114_1705240186-25.0.13.2.tar.gz'...
mv /var/www/nextcloud-bkp_20240114_1705240186.tar.gz /var/www/nextcloud-bkp_20240114_1705240186-25.0.13.2.tar.gz
trap rollback_simple INT TERM HUP ERR
echo 'Install Nextcloud 26.0.10...'
Install Nextcloud 26.0.10...
mv -T nextcloud nextcloud-old
tar -xf nextcloud.tar.bz2
rm -rf /var/www/nextcloud.tar.bz2
cp nextcloud-old/config/config.php nextcloud/config/
cp -raT nextcloud-old/themes/ nextcloud/themes/
for app in nextcloudpi previewgenerator
[[ -d nextcloud-old/apps/nextcloudpi ]]
cp -r -L nextcloud-old/apps/nextcloudpi /var/www/nextcloud/apps/
for app in nextcloudpi previewgenerator
[[ -d nextcloud-old/apps/previewgenerator ]]
cp -r -L nextcloud-old/apps/previewgenerator /var/www/nextcloud/apps/
[[ /media/Daten-Festplatte/ncdata/data == /\v\a\r/\w\w\w/\n\e\x\t\c\l\o\u\d/\d\a\t\a ]]
[[ /media/Daten-Festplatte/ncdata/data == /\d\a\t\a/\n\e\x\t\c\l\o\u\d/\d\a\t\a ]]
trap rollback INT TERM HUP ERR
echo 'Fix permissions...'
Fix permissions...
chown -R www-data:www-data nextcloud
find nextcloud/ -type d -exec chmod 750 '{}' ';'
find nextcloud/ -type f -exec chmod 640 '{}' ';'
echo Upgrade...
Upgrade...
ncc='sudo -u www-data php nextcloud/occ'
sudo -u www-data php nextcloud/occ upgrade
This version of Nextcloud requires at least PHP 8.0
You are currently running 7.4.33. Please update your PHP version.++ rollback
++ set +eE
++ trap '' INT TERM HUP ERR EXIT
++ echo -e 'Abort\nClean up...'
Abort
Clean up...
++ rm -rf /var/www/nextcloud.tar.bz2 /var/www/nextcloud-old
++ echo 'Rolling back to backup /var/www/nextcloud-bkp_20240114_1705240186-25.0.13.2.tar.gz...'
Rolling back to backup /var/www/nextcloud-bkp_20240114_1705240186-25.0.13.2.tar.gz...
++ local TMPDATA
++ mkdir -p /var/www/recovery/
+++ mktemp -d /var/www/recovery/ncp-data.XXXXXX
++ TMPDATA=/var/www/recovery/ncp-data.9kBLQV
++ [[ /media/Daten-Festplatte/ncdata/data == /\v\a\r/\w\w\w/\n\e\x\t\c\l\o\u\d/\d\a\t\a ]]
++ ncp-restore /var/www/nextcloud-bkp_20240114_1705240186-25.0.13.2.tar.gz
check free space...
extracting backup file /var/www/nextcloud-bkp_20240114_1705240186-25.0.13.2.tar.gz...
restore files...
restore database...
No datadir found in backup
Maintenance mode disabled
Starting scan for user 1 out of 4 [censored]
Starting scan for user 2 out of 4 [censored]
Starting scan for user 3 out of 4 [censored]
Starting scan for user 4 out of 4 [censored]
+---------+-------+--------------+
| Folders | Files | Elapsed time |
+---------+-------+--------------+
| 15160 | 96812 | 00:02:30 |
+---------+-------+--------------+
Installing template 'php/opcache.ini.sh'...
System config value tempdirectory set to string /media/Daten-Festplatte/ncdata/data/tmp
System config value logfile set to string /media/Daten-Festplatte/ncdata/data/nextcloud.log
System config value trusted_domains => 11 set to string 2a01:c23:c4d6:b600:fba5:a881:b460:a634
System config value trusted_domains => 1 set to string 192.168.178.20
System config value trusted_domains => 14 set to string nextcloudpi
Scanning AppData for files

+---------+-------+--------------+
| Folders | Files | Elapsed time |
+---------+-------+--------------+
| 93836 | 21383 | 00:07:50 |
+---------+-------+--------------+
Cleanup...
++ [[ /media/Daten-Festplatte/ncdata/data == /\v\a\r/\w\w\w/\n\e\x\t\c\l\o\u\d/\d\a\t\a ]]
++ rm /var/www/nextcloud-bkp_20240114_1705240186-25.0.13.2.tar.gz
++ echo 'Rollback successful. Nothing was updated'
Rollback successful. Nothing was updated
++ exit 1

pkra · 2024-01-23T11:33:57Z

@theCalcaholic I seem to have the same issue as @FloKoll (no PHP 8). I'm on NC v25.0.9.2 and debugging output looks fairly identical to the comment just above this one. Happy to provide additional information if that's useful.

christoph-bittmann · 2024-03-06T19:50:49Z

@pkra, @FloKoll
Have you tried to install or switch to php8.1 manuell? Maybe it's already installed on your system and you only must switch to php8.1 as default (see https://think.unblog.ch/en/php-versions-switching-on-debian-with-apache2/).
Maybe update packaged before: sudo apt update && sudo apt upgrade -y

FloKoll · 2024-03-12T20:16:35Z

@christoph-bittmann @theCalcaholic

Thank you very much for your answer. I had feared that my request had come to a dead end. PHP 8.1 isn't installed and not in the bullseye repositories. I fear that things might break in the future if I use other sources.

apt list --installed | grep php

WARNING: apt does not have a stable CLI interface. Use with caution in scripts.

php-apcu-bc/oldstable,now 1.0.5-5 arm64 [installed,automatic]
php-apcu/oldstable,now 5.1.19+4.0.11-3 arm64 [installed]
php-common/oldstable,oldstable,now 2:76 all [installed,automatic]
php-igbinary/oldstable,now 3.2.1+2.0.8-2 arm64 [installed,automatic]
php-imagick/oldstable,now 3.4.4+php8.0+3.4.4-2+deb11u2 arm64 [installed]
php-redis/oldstable,now 5.3.2+4.3.0-2+deb11u1 arm64 [installed]
php7.4-bcmath/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-bz2/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-cli/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-common/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-curl/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-fpm/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-gd/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-gmp/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-intl/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-json/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-ldap/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-mbstring/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-mysql/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-opcache/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-readline/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed,automatic]
php7.4-xml/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4-zip/oldstable,oldstable-security,now 7.4.33-1+deb11u4 arm64 [installed]
php7.4/oldstable,oldstable,oldstable-security,oldstable-security,now 7.4.33-1+deb11u4 all [installed]

pkra · 2024-03-13T09:12:17Z

@christoph-bittmann thanks for following up. I have a similar apt list output as @FloKoll, i.e., only php 7.4.

A while back (when nextcloud first required it), I had tried to manually upgrade to php 8.1 and my inexperience had messed up my system. If there's a recommended guide, I'd be willing to try again.

kevinestel · 2024-03-16T18:50:51Z

Update: If all goes well with the next releases, I see ourselves supporting Debian Bookworm in 2024-03

I would be very interested too. Can you tell if it's coming soon ?

Thanks for what you're doing !

blueskyfeeling · 2024-03-27T11:31:13Z

Can anyone tell us, when nextcloudpi will be available on bookworm approximately?

theCalcaholic · 2024-03-28T11:52:35Z

Can anyone tell us, when nextcloudpi will be available on bookworm approximately?

Expect preliminary bookworm support in 1-2 weeks

Artorias38 · 2024-04-18T21:01:21Z

Can anyone tell us, when nextcloudpi will be available on bookworm approximately?

Expect preliminary bookworm support in 1-2 weeks

Anything new? I am eager to use my new pi 5 :D

sunjam · 2024-04-20T03:05:36Z

Debian 12 support #1887

This was linked in the top post as well, to follow along with development.

theCalcaholic · 2024-04-20T17:04:54Z

Can anyone tell us, when nextcloudpi will be available on bookworm approximately?

Expect preliminary bookworm support in 1-2 weeks

Anything new? I am eager to use my new pi 5 :D

I'm still working on it. The armbian builds are giving a bit trouble still, but I hope I can release new images for testing soon

nbendall34 · 2024-04-20T18:23:47Z

Thanks @theCalcaholic, looking forward to it, very eager to use my new RPI5 8G :)

blueskyfeeling · 2024-04-21T18:39:05Z

I can't wait any longer :-) and will be very grateful if it works. A big compliment to @theCalcaholic

theCalcaholic · 2024-04-22T14:15:06Z

There's now a test release based on Debian 12: https://github.com/nextcloud/nextcloudpi/releases/tag/v1.54.0-rc3

If you are able to test any of the images, please consider giving feedback :)

blueskyfeeling · 2024-04-23T19:13:05Z

Great. In the meantime, I was able to test the version for a Raspi5. So far no problems. I'll continue testing extensively over the weekend.

szarpaj · 2024-04-27T21:55:55Z

There's now a test release based on Debian 12: https://github.com/nextcloud/nextcloudpi/releases/tag/v1.54.0-rc3

If you are able to test any of the images, please consider giving feedback :)

I have one installation that was upgraded to Debian 12 while nextcloud on 23.x and it stuck there. No go to 24.x. With this -rc3 I've upgraded to 26.x (due to timeline I had to stop there for few days). But it seems that the bigest issue isn't there anymore. Great job!

blueskyfeeling · 2024-04-28T08:11:13Z

Now I tested the NextcloudPi_RaspberryPi5_v1.54.0-rc3.zip image and it seems, that it works very well. I also copied the entire Nextcloud from a Raspi4 and everything worked there too. If nothing speaks against it, I would then make the real move soon, is that possible?

Maybe a small (ridiculous) question: Is there a reason,

why my Raspi 4 appears green on putty and white on Raspi5 (see attached picture)? Is there anything else that needs to be corrected here? I don't know that much about it excatly.

github-actions bot added the has-updates label Jun 13, 2023

sunjam mentioned this issue Nov 3, 2023

Raspberry Pi 5 support #1832

Open

theCalcaholic self-assigned this Dec 27, 2023

theCalcaholic pinned this issue Dec 27, 2023

theCalcaholic mentioned this issue Dec 27, 2023

Add booksworm support for install.sh script #1856

Closed

m-breitbach mentioned this issue Jan 24, 2024

Raspnerry PI 5 not working with unofficial power supply #1863

Closed

Debian 12 Bookworm Support #1730

Debian 12 Bookworm Support #1730

Comments

sunjam commented Feb 11, 2023 • edited

theCalcaholic commented Jun 14, 2023

abmusse commented Aug 5, 2023 • edited

tom-i commented Aug 6, 2023

tom-i commented Aug 6, 2023

SHA-NDY commented Aug 28, 2023

SHA-NDY commented Aug 28, 2023

morgan-germain commented Oct 15, 2023

theCalcaholic commented Oct 18, 2023 • edited

theCalcaholic commented Dec 27, 2023

FloKoll commented Jan 4, 2024

theCalcaholic commented Jan 7, 2024 • edited

FloKoll commented Jan 9, 2024 • edited

theCalcaholic commented Jan 9, 2024 • edited

FloKoll commented Jan 9, 2024 • edited

theCalcaholic commented Jan 9, 2024 • edited

FloKoll commented Jan 9, 2024 • edited

FloKoll commented Jan 12, 2024 • edited

FloKoll commented Jan 12, 2024 • edited

theCalcaholic commented Jan 12, 2024

FloKoll commented Jan 13, 2024 • edited

theCalcaholic commented Jan 13, 2024

FloKoll commented Jan 14, 2024 • edited

FloKoll commented Jan 14, 2024

theCalcaholic commented Jan 14, 2024 • edited

FloKoll commented Jan 14, 2024

pkra commented Jan 23, 2024

christoph-bittmann commented Mar 6, 2024

FloKoll commented Mar 12, 2024 • edited

pkra commented Mar 13, 2024

kevinestel commented Mar 16, 2024

blueskyfeeling commented Mar 27, 2024

theCalcaholic commented Mar 28, 2024

Artorias38 commented Apr 18, 2024

sunjam commented Apr 20, 2024 • edited

theCalcaholic commented Apr 20, 2024

nbendall34 commented Apr 20, 2024

blueskyfeeling commented Apr 21, 2024

theCalcaholic commented Apr 22, 2024

blueskyfeeling commented Apr 23, 2024

szarpaj commented Apr 27, 2024

blueskyfeeling commented Apr 28, 2024

sunjam commented Feb 11, 2023 •

edited

abmusse commented Aug 5, 2023 •

edited

theCalcaholic commented Oct 18, 2023 •

edited

theCalcaholic commented Jan 7, 2024 •

edited

FloKoll commented Jan 9, 2024 •

edited

theCalcaholic commented Jan 9, 2024 •

edited

FloKoll commented Jan 9, 2024 •

edited

theCalcaholic commented Jan 9, 2024 •

edited

FloKoll commented Jan 9, 2024 •

edited

FloKoll commented Jan 12, 2024 •

edited

FloKoll commented Jan 12, 2024 •

edited

FloKoll commented Jan 13, 2024 •

edited

FloKoll commented Jan 14, 2024 •

edited

theCalcaholic commented Jan 14, 2024 •

edited

FloKoll commented Mar 12, 2024 •

edited

sunjam commented Apr 20, 2024 •

edited