amec_sys.h

/* IBM_PROLOG_BEGIN_TAG                                                   */
/* This is an automatically generated prolog.                             */
/*                                                                        */
/* $Source: src/occ_405/amec/amec_sys.h $                                 */
/*                                                                        */
/* OpenPOWER OnChipController Project                                     */
/*                                                                        */
/* Contributors Listed Below - COPYRIGHT 2011,2017                        */
/* [+] International Business Machines Corp.                              */
/*                                                                        */
/*                                                                        */
/* Licensed under the Apache License, Version 2.0 (the "License");        */
/* you may not use this file except in compliance with the License.       */
/* You may obtain a copy of the License at                                */
/*                                                                        */
/*     http://www.apache.org/licenses/LICENSE-2.0                         */
/*                                                                        */
/* Unless required by applicable law or agreed to in writing, software    */
/* distributed under the License is distributed on an "AS IS" BASIS,      */
/* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or        */
/* implied. See the License for the specific language governing           */
/* permissions and limitations under the License.                         */
/*                                                                        */
/* IBM_PROLOG_END_TAG                                                     */

#ifndef _AMEC_SYS_H
#define _AMEC_SYS_H

//*************************************************************************
// Includes
//*************************************************************************
#include <occ_common.h>
#include <sensor.h>
#include <occ_sys_config.h>
#include <amec_part.h>
#include <amec_perfcount.h>
#include <mode.h>
#include <amec_controller.h>
#include <amec_oversub.h>
#include <amec_amester.h>
#include <amec_pcap.h>
#include <amec_smh.h>
#include <wof.h>
#include "dimm_structs.h"

//*************************************************************************
// Externs
//*************************************************************************

//*************************************************************************
// Macros
//*************************************************************************

//*************************************************************************
// Defines/Enums
//*************************************************************************
// This is an arbitrary number of FW probes for use internally.
#define NUM_AMEC_FW_PROBES  8

// Number of States in the AMEC State Machine (= AMEC_SMH_STATES_PER_LVL)
#define NUM_AMEC_SMH_STATES AMEC_SMH_STATES_PER_LVL

// Number of PORE-GPE Engines
#define NUM_GPE_ENGINES     2
#define GPE_ENGINE_0        0
#define GPE_ENGINE_1        1

//*************************************************************************
// Structures
//*************************************************************************

//-------------------------------------------------------------
// FW Sub-structure
//-------------------------------------------------------------
typedef struct
{
  // Sensors
  sensor_t ameintdur;
  sensor_t amessdur[NUM_AMEC_SMH_STATES];
  sensor_t gpetickdur[NUM_GPE_ENGINES];
  sensor_t prcdupdatedur;
  sensor_t probe250us[NUM_AMEC_FW_PROBES];
  sensor_t voltvddsense;
  sensor_t voltvdnsense;

  // DPS update flag
  // 8 bit flag: =1, no updating allowed; =0, updating is allowed
  uint8_t  dps_no_update_flag;

} amec_fw_t;

//-------------------------------------------------------------
// Fan Sub-structure
//-------------------------------------------------------------
typedef struct
{
  // Sensors
  sensor_t pwr250usfan;

} amec_fans_t;

//-------------------------------------------------------------
// IO Sub-structure
//-------------------------------------------------------------
typedef struct
{
  // Sensors
  sensor_t pwr250usio;

} amec_io_t;

//-------------------------------------------------------------
// Storage Sub-structure
//-------------------------------------------------------------
typedef struct
{
  // Sensors
  sensor_t pwr250usstore;

} amec_store_t;

//-------------------------------------------------------------
// Proc Sub-structure
//-------------------------------------------------------------

typedef struct
{
  // Sensors
  sensor_t uvolt250us;
  sensor_t volt250us;

} amec_vrm_t;


typedef struct
{
    uint32_t wr_cnt_accum;
    uint32_t rd_cnt_accum;
    uint32_t pwrup_cnt_accum;
    uint32_t act_cnt_accum;
    uint32_t fr2_cnt_accum;
    uint32_t l4_rd_cnt_accum;
    uint32_t l4_wr_cnt_accum;
    uint32_t intreq_base_accum;
    uint32_t intreq_low_accum;
    uint32_t intreq_med_accum;
    uint32_t intreq_high_accum;

    uint16_t fr2_cnt;
    uint16_t act_cnt;
    uint16_t pwrup_cnt;
    uint16_t memwrite2ms;
    uint16_t memread2ms;
    uint16_t l4wr2ms;
    uint16_t l4rd2ms;
    uint16_t mirb2ms;
    uint16_t mirl2ms;
    uint16_t mirm2ms;
    uint16_t mirh2ms;

} amec_chpair_perf_counter_t;

//convenient format for storing throttle settings
typedef union
{
    uint32_t    word32;
    struct
    {
        uint32_t mba_n: 16;
        uint32_t chip_n: 16;
    };
} amec_cent_mem_speed_t;

typedef struct
{
  // Sensors
  sensor_t mac2ms;
  sensor_t mpu2ms;
  sensor_t mirb2ms;
  sensor_t mirl2ms;
  sensor_t mirm2ms;
  sensor_t mirh2ms;
  sensor_t mts2ms;
  sensor_t memsp2ms;
  sensor_t m4rd2ms;
  sensor_t m4wr2ms;

  amec_chpair_perf_counter_t perf;

  // The most recent throttle value sent to this MBA
  // This is used to only send values to the centaur when it changes.
  amec_cent_mem_speed_t last_mem_speed_sent;
} amec_portpair_t;

typedef struct
{
  uint32_t intreq_highlatency_accum;
  uint32_t lp2exit_accum;

  uint16_t mirc2ms;
  uint16_t mlp2_2ms;
} amec_centaur_perf_counter_t;

#define FRU_SENSOR_STATUS_STALLED       0x01
#define FRU_SENSOR_STATUS_ERROR         0x02
#define FRU_SENSOR_STATUS_VALID_OLD     0x04
#define FRU_TEMP_OUT_OF_RANGE           0x08
#define FRU_SENSOR_STATUS_INVALID       0x10 //centaur only
#define FRU_TEMP_FAST_CHANGE            0x20
#define FRU_SENSOR_CENT_NEST_FIR6       0x40 //centaur only

typedef struct
{
    uint8_t  cur_temp;
    uint8_t  sample_age;
    uint8_t  flags;
    // Sensor ID for reporting temperature to BMC and FSP
    uint32_t temp_sid;
}fru_temp_t;

typedef struct
{
  // Sub-structures under Centaur
  union
  {
      amec_portpair_t       portpair[NUM_PORT_PAIRS_PER_CENTAUR];
      amec_portpair_t       mba[NUM_PORT_PAIRS_PER_CENTAUR];
  };  // Just a different name to refer to same thing

  // Sensors
  sensor_t mlp2ms;
  sensor_t mirc2ms;

  //hottest dimm temperature behind this centaur
  sensor_t tempdimmax;

  //which of the 8 dimm temperatures was the hottest temperature
  //(only changes when the max of tempdimmax changes)
  sensor_t locdimmax;

  // Current dimm tempuratures
  fru_temp_t dimm_temps[NUM_DIMMS_PER_CENTAUR];

  // Hottest centaur temperature for this centaur
  fru_temp_t centaur_hottest;

  // Sensor ID for reporting temperature to BMC and FSP
  uint32_t  temp_sid;

  amec_centaur_perf_counter_t perf;

} amec_centaur_t;

typedef struct
{
  // Sub-structures under MemCtl
  amec_centaur_t      centaur;

  // Sensors
  sensor_t mrd2ms;
  sensor_t mwr2ms;

} amec_memctl_t;

typedef struct
{
  //-----------------------------------
  // Previous Tick Data
  //-----------------------------------
  uint32_t prev_PC_RUN_Th_CYCLES;

  //-----------------------------------
  // Calculations & Interim Data
  //-----------------------------------
  uint16_t util4ms_thread;

} amec_core_thread_t;

typedef struct
{
  // Sub-structures under Core
  amec_core_perf_counter_t     core_perf;
  amec_core_thread_t thread[MAX_THREADS_PER_CORE];

  //-----------------------------------
  // Sensors
  //-----------------------------------
  sensor_t freq250us;
  sensor_t freqa;
  sensor_t ips4ms;
  sensor_t mcpifd4ms;
  sensor_t mcpifi4ms;
  sensor_t tempprocthermal;
  sensor_t util;
  sensor_t nutil3s;
  sensor_t mstl2ms;
  sensor_t cmt2ms;
  sensor_t ppic;
  sensor_t pwrpx250us;
  sensor_t tempc;

  //-----------------------------------
  // Previous Tick Data
  //-----------------------------------
  uint32_t prev_PC_RAW_CYCLES;
  uint32_t prev_PC_RUN_CYCLES;
  uint32_t prev_PC_DISPATCH;
  uint32_t prev_PC_COMPLETED;
  uint32_t prev_PC_RAW_Th_CYCLES;
  uint32_t prev_tod_2mhz;
  uint32_t prev_FREQ_SENS_BUSY;
  uint32_t prev_FREQ_SENS_FINISH;

  //-----------------------------------
  // Calculations & Interim Data
  //-----------------------------------
  // Dispatched Instructions per Second
  uint16_t dps;
  // Dispatched Instruction per Cycle
  uint16_t dpc;
  // Instructions per Cycle
  uint16_t ipc;
  // Hottest DTS sensor per core
  uint16_t dts_hottest;
  // Counter of number of samples for calculating average utilization & frequency
  uint16_t sample_count;

  // Average utilization over a fixed time interval
  uint32_t avg_util;
  // Average frequency over a fixed time interval
  uint32_t avg_freq;

  // ---------------------------------
  // Frequency State Machine variables
  // ---------------------------------
  // Frequency request generated by the voting box
  uint16_t f_request;
  // Reason for the frequency request generated by the voting box
  uint32_t  f_reason;

} amec_core_t;

//-------------------------------------------------------------
// System-wide Sub-structure
//-------------------------------------------------------------
typedef struct
{
  // Sensors
  //sensor_t fake_sensor[NUM_OCCS];
  //
} amec_master_t;


//-------------------------------------------------------------
// System-wide Sub-structure
//-------------------------------------------------------------
typedef struct
{
  // System Sensors
  sensor_t pwrsys;
  sensor_t pwr250usgpu;
  sensor_t pwrapssch[MAX_APSS_ADC_CHANNELS];
  sensor_t cur12Vstby;
  sensor_t vrhot_mem_proc;

  sensor_t vrfan;

  // Chip Sensors
  sensor_t todclock0;
  sensor_t todclock1;
  sensor_t todclock2;

  // Minimum Frequency that can be set in the current policy
  uint16_t fmin;

  // Maximum Frequency that can be set in the current policy
  uint16_t fmax;

  // Maximum speed in current policy
  uint16_t max_speed;

  // Minimum speed in current policy
  uint16_t min_speed;

  // Speed step size
  uint16_t speed_step;

  // Speed step limit
  uint16_t speed_step_limit;

  // Memory Throttle Sent Last time to DIMM Throttle Register
  dimm_n_value_t current_dimm_n_values[NUM_NIMBUS_MC_PAIRS][MAX_NUM_MCU_PORTS];

  // Current Memory Power Control values (applied last through GPE1)
  uint8_t current_mem_pwr_ctl;
} amec_systemwide_t;


typedef struct
{
  //Maximum frequency allowed on this chip by the
  //performance preserving boundary algorithm. Set by amec_ppb_fmax_calc
  uint16_t  ppb_fmax;

  //Maximum frequency allowed on this chip by the Pmax_clip register.
  //Set by amec_pmax_clip_controller.
  uint16_t  pmax_clip_freq;

  //Maximum frequency allowed on this chip by the power capping algorithm for
  //non-nominal cores. Set by amec_pcap_controller.
  uint16_t  proc_pcap_vote;

  //Minimum frequency that power capping is allowed to lower a nominal
  //core to.  Set by amec_pcap_calc.
  uint16_t  nom_pcap_fmin;

  //Maximum frequency allowed on this chip by the power capping algorithm for
  //nominal cores.  Set by amec_pcpa_controller.
  uint16_t  proc_pcap_nom_vote;

  //Maximum frequency allowed on this chip by the Pmax_clip register.
  //Set by amec_slv_check_apss_fail
  uint16_t apss_pmax_clip_freq;

} amec_proc_pwr_votes_t;

//-------------------------------------------------------------
// Quad Structure
//-------------------------------------------------------------
typedef struct
{
    sensor_t tempq;
} amec_quad_t;

//-------------------------------------------------------------
// Proc Structure
//-------------------------------------------------------------
typedef struct
{
  // Sub-structures under Proc
  amec_core_t    core[MAX_NUM_CORES];
  amec_memctl_t  memctl[MAX_NUM_MEM_CONTROLLERS];
  amec_vrm_t     vrm[NUM_PROC_VRMS];
  amec_proc_pwr_votes_t pwr_votes;
  amec_quad_t    quad[MAXIMUM_QUADS];

  // Processor Sensors
  sensor_t freqa;
  vectorSensor_t freqa_vector;
  sensor_t ips4ms;
  vectorSensor_t ips4ms_vector;
  sensor_t memsp2ms;
  vectorSensor_t memsp2ms_vector;
  sensor_t pwrproc;
  sensor_t pwr250usvdd;
  sensor_t curvdd;
  sensor_t pwrvcsviovdn;
  sensor_t pwr250usmem;
  sensor_t sleepcnt4ms;
  sensor_t winkcnt4ms;
  sensor_t sp250us;
  sensor_t tempprocavg;
  vectorSensor_t temp4ms_vector;
  sensor_t tempprocthermal;
  vectorSensor_t tempprocthermal_vector;
  sensor_t util;
  sensor_t tempnest;
  vectorSensor_t util_vector;

  // Memory Summary Sensors
  sensor_t temp2mscent;
  sensor_t tempdimmthrm;
  sensor_t memsp2ms_tls;

  // Nimbus DIMM Sensors
  sensor_t       tempdimm[NUM_DIMM_PORTS*NUM_DIMMS_PER_I2CPORT];

 // GPU Sensors
  sensor_t tempgpu0;
  sensor_t tempgpu1;
  sensor_t tempgpu2;

  sensor_t curvdn;
  sensor_t pwrvdd;
  sensor_t pwrvdn;

  // Calculations & Interim Data
  uint16_t sleep_cnt;
  uint16_t winkle_cnt;

  uint16_t core_max_freq;               // Maximum requested freq for all cores on chip.

  // Parameters used through Amester interface
  // Note: keep core arrays here, not in per-cores structure so one parameter
  // can be used to pass array.
  uint32_t parm_f_reason[MAX_NUM_CORES];   // per-core frequency reason
  uint16_t parm_f_override[MAX_NUM_CORES]; // per-core frequency override in MHz
  uint8_t  parm_f_override_enable;         // enable using the frequency override

} amec_proc_t;



//-------------------------------------------------------------
// Mode Freq Structure
//-------------------------------------------------------------
typedef struct amec_mode_freq
{
    uint16_t                      fmin;
    uint16_t                      fmax;
    ///Minimum speed allowed based on fmin/fmax ratio
    uint16_t                      min_speed;
} amec_mode_freq_t;


//-------------------------------------------------------------
// Parameters for manufacturing commands
//-------------------------------------------------------------
typedef struct amec_mnfg
{
    ///Auto-slewing flag: enable=1, disable=0
    uint8_t             auto_slew;
    ///Minimum frequency in MHz for auto-slewing
    uint16_t            fmin;
    ///Maximum frequency in MHz for auto-slewing
    uint16_t            fmax;
    ///Step size in MHz for auto-slewing
    uint16_t            fstep;
    ///Additional delay in ticks for auto-slewing
    uint16_t            delay;
    ///Frequency override to be sent to all slave OCCs
    uint16_t            foverride;
    ///Counter of times we reached fmin or fmax
    uint16_t            slew_counter;
    ///memory auto-slewing flag: enable=1, disable=0
    bool                mem_autoslew;
    ///memory slewing count
    uint32_t            mem_slew_counter;
    ///Per Quad Pstate request: 0xFF=no request
    uint8_t             quad_pstate[MAXIMUM_QUADS];
} amec_mnfg_t;

//-------------------------------------------------------------
// Parameters for Idle Power Save (IPS) mode
//-------------------------------------------------------------
typedef struct amec_ips
{
    ///Enable/Disable IPS (=0:disable; =1:enable)
    uint8_t             enable;
    ///Current 'active' state of IPS (=0:inactive; =1:active)
    uint8_t             active;
    ///IPS frequency request to be sent to all OCC Slaves
    uint16_t            freq_request;
    ///Utilization threshold to enter idle condition (in hundreth of a percent)
    uint16_t            entry_threshold;
    ///Utilization threshold to exit idle condition (in hundreth of a percent)
    uint16_t            exit_threshold;
    ///Delay time to enter idle condition (in number of samples)
    uint32_t            entry_delay;
    ///Delay time to exit idle condition (in number of samples)
    uint32_t            exit_delay;
}amec_ips_t;


//-------------------------------------------------------------
//
// AMEC/OCC Overall System Structure -- g_amec
//
//-------------------------------------------------------------
typedef struct
{
  //---------------------------------------------------------
  //
  // System Management Settings
  //
  //---------------------------------------------------------
  // Global memory throttle reason
  uint8_t               mem_throttle_reason;
  // Global memory speed request
  uint16_t              mem_speed_request;

  // Flag to enable frequency override in the voting box due to Master OCC request
  uint8_t               foverride_enable;
  // Override frequency to be used by the voting box due to Master OCC request
  uint16_t              foverride;
  // Flag to enable frequency override in the voting box due to a Pstate table update
  uint8_t               pstate_foverride_enable;
  // Override frequency to be used by the voting box due to a Pstate table update
  uint16_t              pstate_foverride;

  // Idle Power Saver frequency request sent by Master OCC
  uint16_t              slv_ips_freq_request;
  // Flag to indicate that the DPS parameters were overwritten by user
  BOOLEAN               slv_dps_param_overwrite;

  //---------------------------------------------------------
  //
  // Physical Structure
  //
  //---------------------------------------------------------
  // IO Data
  amec_io_t     io;

  // Storage Data
  amec_store_t  storage;

  // Fan Data
  amec_fans_t   fan;

  // Overall System Data
  amec_systemwide_t    sys;

  // Processor Card Data
  //   - This is an array of 1.  This was initialized this way
  //     in the hopes of perhaps reusing some code from previous projects.
  amec_proc_t   proc[NUM_PROC_CHIPS_PER_OCC];

  // OCC Firmware Data
  amec_fw_t     fw;

  // Sensors on master for calculations across multiple OCCs
  //amec_master_t mstr;

  // Partition Information
  amec_part_config_t    part_config;
  // Mode frequency table indexed by mode
  amec_mode_freq_t      part_mode_freq[OCC_INTERNAL_MODE_MAX_NUM];

  //---------------------------------------------------------
  //
  // Control Systems
  //
  //---------------------------------------------------------
  // Thermal Controller based on processor temperatures
  amec_controller_t     thermalproc;
  // Thermal Controller based on Centaur temperatures
  amec_controller_t     thermalcent;
  // Thermal Controller based on DIMM temperatures
  amec_controller_t     thermaldimm;
  // Thermal Controller based on VRHOT signal from processor VRM
  amec_controller_t     vrhotproc;

  // Oversubscription Status
  oversub_status_t      oversub_status;

  // Parameters for manufacturing commands
  amec_mnfg_t           mnfg_parms;

  // Parameters for Idle Power Save (IPS) mode
  amec_ips_t            mst_ips_parms;

  // PowerCap Data
  amec_pcap_t           pcap;

  // Save off proc and mem sensor data for debug usage
  uint16_t              proc_snr_pwr[MAX_NUM_CHIP_MODULES];
  uint16_t              mem_snr_pwr[MAX_NUM_CHIP_MODULES];

  // save off when pcap is considered valid
  uint8_t               pcap_valid;

  // WOF structure
  amec_wof_t            wof;


  //---------------------------------------------------------
  //
  // Parameters for analytics function
  //
  //---------------------------------------------------------
  // 32 bit counter of 250usec ticks
  uint32_t      r_cnt;
  // array holding sensor ptrs for writing to stream vector
  void          *stream_vector_map[STREAM_VECTOR_SIZE_EX];
  void          * ptr_probe250us[NUM_AMEC_FW_PROBES];       // array holding ptrs to data that is read by probe250us sensors
  // 32-bit ptr to streaming buffer which contains 16 bit elements
  uint16_t      *ptr_stream_buffer;
  // 32-bit index for next write into streaming buffer
  uint32_t      write_stream_index;
  // 32-bit index for next read from streaming buffer
  uint32_t      read_stream_index;
  // stream buffer for vector recordings
  uint16_t      stream_buffer[STREAM_BUFFER_SIZE];
  // initially 0 until recording is valid
  uint8_t       recordflag;
  // 16-bit delay in msec before stream vector records (set to 0 to avoid delay)
  uint16_t      stream_vector_delay;
  // 8-bit mode control for stream vector mode:
  uint8_t       stream_vector_mode;    //  0=stop recording
                                       //  1=record unconditionally from begin to end of buffer, then stop
                                       //  2=record unconditionally forever
                                       //  3=record until a checkstop event is detected
  // 8-bit mode control for stream vector recording:
  // 0=fastest sampling on platform: (250usec on OCC); 7=32msec
  uint8_t       stream_vector_rate;
  // 8-bit group # that selects which group of sensors to record as a vector
  uint8_t       stream_vector_group;
  // input from TMGT to signal a reset of the OCC is desired (!=0)
  uint8_t       reset_prep;
  // holds current state of L4 state machine for Centaur k
  uint16_t      cent_l4_state[MAX_NUM_CENTAURS];
  // holds current state of L4 IPL state machine for Centaur k
  uint16_t      cent_l4_ipl_state[MAX_NUM_CENTAURS];
  // input from OCC master to signal a desire to power down the L4s (!=0)
  uint8_t       l4_powerdown_requestm;
  // indicates which of the L4 Centaurs is being monitored by probe.
  uint16_t      probe_l4_centaur;
  uint32_t      g44_avg[MAX_NUM_CHIP_MODULES*MAX_SENSORS_ANALYTICS];
  // parameter driven selection of analytics group
  uint16_t      analytics_group;
  // parameter to select which chip to monitor analytics on
  uint8_t       analytics_chip;
  // parameter to select which analytics options (=0 just selected chip)
  uint8_t       analytics_option;
  // 8-bit value used to throw away frames until good output has been averaged in amec_analytics buffer outputs
  uint8_t       analytics_bad_output_count;
  // Total number of chips used in analytics sensor capture
  uint8_t       analytics_total_chips;
  // Current offset in cyclic thermal group output (8 in cycle)
  uint8_t       analytics_thermal_offset;
  // Selects which type of Group 44 averaging is done on per thread data:
  // default=0 (average of non-zero thread utilizations), =1 (average of N), =2 (max of N)
  uint8_t       analytics_threadmode;
  // Has the maximum number of threads per core for this processor architecture or for SMT modes. Default=4 on P7+.
  uint8_t       analytics_threadcountmax;
  // Which of 8 time slots that amec_analytics is called in
  uint8_t       analytics_slot;
  // Used to hold selected analytics group
  uint16_t      analytics_array[STREAM_VECTOR_SIZE_EX];
  // for group 44 support core bit maps of their napping cores (upper byte) and sleeping cores (lower byte)
  uint16_t      packednapsleep[MAX_NUM_CHIP_MODULES];
  // holds the sum of all the memory power sensors (32msec)
  uint16_t      total_memory_power;
  uint16_t  probetemp[NUM_AMEC_FW_PROBES];                  // array holding temporary probe data
  uint8_t       size_probe250us[NUM_AMEC_FW_PROBES];        // size of object pointed at by each probe (1 byte, 2 bytes, or 4 bytes)
  uint8_t       index_probe250us[NUM_AMEC_FW_PROBES];       // index offset to read object pointed to by each probe (only valid for size > 2)

} amec_sys_t;

//*************************************************************************
// Globals
//*************************************************************************
extern amec_sys_t * g_amec;

//*************************************************************************
// Function Prototypes
//*************************************************************************
void amec_slave_init(void) INIT_SECTION;

#endif