proxy-server.conf.5

.\"
.\" Author: Joao Marcelo Martins <marcelo.martins@rackspace.com> or <btorch@gmail.com>
.\" Copyright (c) 2010-2012 OpenStack, LLC.
.\"
.\" Licensed under the Apache License, Version 2.0 (the "License");
.\" you may not use this file except in compliance with the License.
.\" You may obtain a copy of the License at
.\"
.\"    http://www.apache.org/licenses/LICENSE-2.0
.\"
.\" Unless required by applicable law or agreed to in writing, software
.\" distributed under the License is distributed on an "AS IS" BASIS,
.\" WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or
.\" implied.
.\" See the License for the specific language governing permissions and
.\" limitations under the License.
.\"  
.TH proxy-server.conf 5 "8/26/2011" "Linux" "OpenStack Swift"

.SH NAME 
.LP
.B proxy-server.conf
\- configuration file for the openstack-swift proxy server 



.SH SYNOPSIS
.LP
.B proxy-server.conf



.SH DESCRIPTION 
.PP
This is the configuration file used by the proxy server and other proxy middlewares.

The configuration file follows the python-pastedeploy syntax. The file is divided
into sections, which are enclosed by square brackets. Each section will contain a 
certain number of key/value parameters which are described later. 

Any line that begins with a '#' symbol is ignored. 

You can find more information about python-pastedeploy configuration format at 
\fIhttp://pythonpaste.org/deploy/#config-format\fR



.SH GLOBAL SECTION
.PD 1 
.RS 0
This is indicated by section named [DEFAULT]. Below are the parameters that 
are acceptable within this section. 

.IP "\fBbind_ip\fR"
IP address the proxy server should bind to. The default is 0.0.0.0 which will make 
it bind to all available addresses.
.IP "\fBbind_port\fR" 
TCP port the proxy server should bind to. The default is 80. 
.IP \fBbacklog\fR 
TCP backlog.  Maximum number of allowed pending connections. The default value is 4096. 
.IP \fBworkers\fR 
Number of container server workers to fork. The default is 1. 
.IP \fBuser\fR 
The system user that the container server will run as. The default is swift. 
.IP \fBswift_dir\fR 
Swift configuration directory. The default is /etc/swift.
.IP \fBcert_file\fR 
Location of the SSL certificate file. The default path is /etc/swift/proxy.crt. This is 
disabled by default.  
.IP \fBkey_file\fR 
Location of the SSL certificate key file. The default path is /etc/swift/proxy.key. This is 
disabled by default. 
.IP \fBlog_name\fR 
Label used when logging. The default is swift.
.IP \fBlog_facility\fR 
Syslog log facility. The default is LOG_LOCAL0.
.IP \fBlog_level\fR 
Logging level. The default is INFO.
.RE
.PD



.SH PIPELINE SECTION
.PD 1 
.RS 0
This is indicated by section name [pipeline:main]. Below are the parameters that
are acceptable within this section. 

.IP "\fBpipeline\fR"
It is used when you need apply a number of filters. It is a list of filters 
ended by an application. The default should be \fB"catch_errors healthcheck 
cache ratelimit tempauth proxy-server"\fR
.RE
.PD



.SH FILTER SECTION
.PD 1 
.RS 0
Any section that has its name prefixed by "filter:" indicates a filter section.
Filters are used to specify configuration parameters for specific swift middlewares.
Below are the filters available and respective acceptable parameters. 
.IP "\fB[filter:healthcheck]\fR"
.RE
.RS 3
.IP "\fBuse\fR"
Entry point for paste.deploy for the healthcheck middleware. This is the reference to the installed python egg. 
The default is \fBegg:swift#healthcheck\fR.
.RE


.RS 0
.IP "\fB[filter:tempauth]\fR"
.RE
.RS 3
.IP \fBuse\fR 
Entry point for paste.deploy for the tempauth middleware. This is the reference to the installed python egg. 
The default is \fBegg:swift#tempauth\fR.
.IP "\fBset log_name\fR"
Label used when logging. The default is tempauth.
.IP "\fBset log_facility\fR"
Syslog log facility. The default is LOG_LOCAL0.
.IP "\fBset log_level\fR "
Logging level. The default is INFO.
.IP "\fBset log_headers\fR "
Enables the ability to log request headers. The default is False.
.IP \fBreseller_prefix\fR
The reseller prefix will verify a token begins with this prefix before even
attempting to validate it. Also, with authorization, only Swift storage accounts 
with this prefix will be authorized by this middleware. Useful if multiple auth 
systems are in use for one Swift cluster. The default is AUTH.
.IP \fBauth_prefix\fR 
The auth prefix will cause requests beginning with this prefix to be routed 
to the auth subsystem, for granting tokens, etc. The default is /auth/.
.IP \fBtoken_life\fR 
This is the time in seconds before the token expires. The default is 86400.
.IP \fBallowed_sync_hosts\fR 
This is a comma separated list of hosts allowed to send X-Container-Sync-Key requests.
.IP \fBuser_<account>_<user>\fR 
Lastly, you need to list all the accounts/users you want here. The format is: 
user_<account>_<user> = <key> [group] [group] [...] [storage_url] 

There are special groups of: \fI.reseller_admin\fR who can do anything to any account for this auth
and also \fI.admin\fR who can do anything within the account.

If neither of these groups are specified, the user can only access containers that 
have been explicitly allowed for them by a \fI.admin\fR or \fI.reseller_admin\fR.
The trailing optional storage_url allows you to specify an alternate url to hand 
back to the user upon authentication. If not specified, this defaults to 
\fIhttp[s]://<ip>:<port>/v1/<reseller_prefix>_<account>\fR where http or https depends 
on whether cert_file is specified in the [DEFAULT] section, <ip> and <port> are based 
on the [DEFAULT] section's bind_ip and bind_port (falling back to 127.0.0.1 and 8080), 
<reseller_prefix> is from this section, and <account> is from the user_<account>_<user> name. 

Here are example entries, required for running the tests:
.RE

.PD 0
.RS 10
.IP "user_admin_admin = admin .admin .reseller_admin"
.IP "user_test_tester = testing .admin"
.IP "user_test2_tester2 = testing2 .admin"
.IP "user_test_tester3 = testing3"
.RE
.PD 

.RS 0
.IP "\fB[filter:healthcheck]\fR"
.RE
.RS 3
.IP \fBuse\fR
Entry point for paste.deploy for the healthcheck middleware. This is the reference to the installed python egg. 
The default is \fBegg:swift#healthcheck\fR.
.IP "\fBset log_name\fR"
Label used when logging. The default is healthcheck.
.IP "\fBset log_facility\fR"
Syslog log facility. The default is LOG_LOCAL0.
.IP "\fBset log_level\fR "
Logging level. The default is INFO.
.IP "\fBset log_headers\fR "
Enables the ability to log request headers. The default is False.
.RE



.RS 0
.IP "\fB[filter:cache]\fR"
.RE

Caching middleware that manages caching in swift.

.RS 3
.IP \fBuse\fR
Entry point for paste.deploy for the memcache middleware. This is the reference to the installed python egg. 
The default is \fBegg:swift#memcache\fR.
.IP "\fBset log_name\fR"
Label used when logging. The default is memcache.
.IP "\fBset log_facility\fR"
Syslog log facility. The default is LOG_LOCAL0.
.IP "\fBset log_level\fR "
Logging level. The default is INFO.
.IP "\fBset log_headers\fR "
Enables the ability to log request headers. The default is False.
.IP \fBmemcache_servers\fR
Default for memcache_servers is to try to read the property from /etc/swift/memcache.conf (see memcache.conf-sample) or lacking that file, it will default to the value below. You can specify multiple servers separated with commas, as in: 10.1.2.3:11211,10.1.2.4:11211. This can be a list separated by commas. The default is 127.0.0.1:11211.
.RE



.RS 0
.IP "\fB[filter:ratelimit]\fR"
.RE

Rate limits requests on both an Account and Container level.  Limits are configurable.

.RS 3
.IP \fBuse\fR
Entry point for paste.deploy for the ratelimit middleware. This is the reference to the installed python egg. 
The default is \fBegg:swift#ratelimit\fR.
.IP "\fBset log_name\fR"
Label used when logging. The default is ratelimit.
.IP "\fBset log_facility\fR"
Syslog log facility. The default is LOG_LOCAL0.
.IP "\fBset log_level\fR "
Logging level. The default is INFO.
.IP "\fBset log_headers\fR "
Enables the ability to log request headers. The default is False.
.IP \fBclock_accuracy\fR
This should represent how accurate the proxy servers' system clocks are with each other. 
1000 means that all the proxies' clock are accurate to each other within 1 millisecond. 
No ratelimit should be higher than the clock accuracy. The default is 1000.
.IP \fBmax_sleep_time_seconds\fR
App will immediately return a 498 response if the necessary sleep time ever exceeds  
the given max_sleep_time_seconds. The default is 60 seconds.
.IP \fBlog_sleep_time_seconds\fR
To allow visibility into rate limiting set this value > 0 and all sleeps greater than 
the number will be logged. If set to 0 means disabled. The default is 0.
.IP \fBrate_buffer_seconds\fR
Number of seconds the rate counter can drop and be allowed to catch up 
(at a faster than listed rate). A larger number will result in larger spikes in 
rate but better average accuracy. The default is 5.
.IP \fBaccount_ratelimit\fR
If set, will limit PUT and DELETE requests to /account_name/container_name. Number is 
in requests per second. If set to 0 means disabled. The default is 0.
.IP \fBaccount_whitelist\fR
Comma separated lists of account names that will not be rate limited. The default is ''.
.IP \fBaccount_blacklist\fR
Comma separated lists of account names that will not be allowed. Returns a 497 response.
The default is ''.
.IP \fBcontainer_ratelimit_size\fR
When set with container_limit_x = r: for containers of size x, limit requests per second 
to r. Will limit PUT, DELETE, and POST requests to /a/c/o. The default is ''.
.RE



.RS 0 
.IP "\fB[filter:catch_errors]\fR"
.RE
.RS 3
.IP \fBuse\fR
Entry point for paste.deploy for the catch_errors middleware. This is the reference to the installed python egg. 
The default is \fBegg:swift#catch_errors\fR.
.IP "\fBset log_name\fR"
Label used when logging. The default is catch_errors.
.IP "\fBset log_facility\fR"
Syslog log facility. The default is LOG_LOCAL0.
.IP "\fBset log_level\fR "
Logging level. The default is INFO.
.IP "\fBset log_headers\fR"
Enables the ability to log request headers. The default is False.
.RE



.RS 0 
.IP "\fB[filter:cname_lookup]\fR"
.RE

Note: this middleware requires python-dnspython

.RS 3
.IP \fBuse\fR
Entry point for paste.deploy for the cname_lookup middleware. This is the reference to the installed python egg. 
The default is \fBegg:swift#cname_lookup\fR.
.IP "\fBset log_name\fR"
Label used when logging. The default is cname_lookup.
.IP "\fBset log_facility\fR"
Syslog log facility. The default is LOG_LOCAL0.
.IP "\fBset log_level\fR "
Logging level. The default is INFO.
.IP "\fBset log_headers\fR"
Enables the ability to log request headers. The default is False.
.IP \fBstorage_domain\fR 
The domain to be used by the middleware.
.IP \fBlookup_depth\fR
How deep in the CNAME chain to look for something that matches the storage domain. 
The default is 1.
.RE



.RS 0 
.IP "\fB[filter:staticweb]\fR"
.RE

Note: Put staticweb just after your auth filter(s) in the pipeline

.RS 3
.IP \fBuse\fR
Entry point for paste.deploy for the staticweb middleware. This is the reference to the installed python egg. 
The default is \fBegg:swift#staticweb\fR.
.IP \fBcache_timeout\fR
Seconds to cache container x-container-meta-web-* header values. The default is 300 seconds.
.IP "\fBset log_name\fR"
Label used when logging. The default is staticweb.
.IP "\fBset log_facility\fR"
Syslog log facility. The default is LOG_LOCAL0.
.IP "\fBset log_level\fR "
Logging level. The default is INFO.
.IP "\fBset log_headers\fR"
Enables the ability to log request headers. The default is False.
.IP "\fBset access_log_name\fR"
Label used when logging. The default is staticweb.
.IP "\fBset access_log_facility\fR"
Syslog log facility. The default is LOG_LOCAL0.
.IP "\fBset access_log_level\fR "
Logging level. The default is INFO.
.RE



.RS 0 
.IP "\fB[filter:tempurl]\fR"
.RE

Note: Put tempurl just before your auth filter(s) in the pipeline

.RS 3
.IP \fBincoming_remove_headers\fR
The headers to remove from incoming requests. Simply a whitespace delimited list of header names and names can optionally end with '*' to indicate a prefix match. incoming_allow_headers is a list of exceptions to these removals.
.IP \fBincoming_allow_headers\fR
The headers allowed as exceptions to incoming_remove_headers. Simply a whitespace delimited list of header names and names can optionally end with '*' to indicate a prefix match.
.IP "\fBoutgoing_remove_headers\fR"
The headers to remove from outgoing responses. Simply a whitespace delimited list of header names and names can optionally end with '*' to indicate a prefix match. outgoing_allow_headers is a list of exceptions to these removals.
.IP "\fBoutgoing_allow_headers\fR"
The headers allowed as exceptions to outgoing_remove_headers. Simply a whitespace delimited list of header names and names can optionally end with '*' to indicate a prefix match.
.IP "\fBset log_level\fR "
.RE



.RS 0 
.IP "\fB[filter:formpost]\fR"
.RE

Note: Put formpost just before your auth filter(s) in the pipeline 

.RS 3
.IP \fBuse\fR
Entry point for paste.deploy for the formpost middleware. This is the reference to the installed python egg.
The default is \fBegg:swift#formpost\fR.
.RE 



.RS 0 
.IP "\fB[filter:name_check]\fR"
.RE

Note: Just needs to be placed before the proxy-server in the pipeline. 

.RS 3
.IP \fBuse\fR
Entry point for paste.deploy for the name_check middleware. This is the reference to the installed python egg.
The default is \fBegg:swift#name_check\fR.
.IP \fBforbidden_chars\fR
Characters that will not be allowed in a name.
.IP \fBmaximum_length\fR
Maximum number of characters that can be in the name.
.RE 


.PD




.SH APP SECTION
.PD 1 
.RS 0
This is indicated by section name [app:proxy-server]. Below are the parameters
that are acceptable within this section.
.IP \fBuse\fR
Entry point for paste.deploy for the proxy server. This is the reference to the installed python egg. 
The default is \fBegg:swift#proxy\fR.
.IP "\fBset log_name\fR 
Label used when logging. The default is proxy-server.
.IP "\fBset log_facility\fR 
Syslog log facility. The default is LOG_LOCAL0.
.IP "\fB set log_level\fR 
Logging level. The default is INFO.
.IP "\fBset access_log_name\fR"
Label used when logging. The default is proxy-server.
.IP "\fBset access_log_facility\fR"
Syslog log facility. The default is LOG_LOCAL0.
.IP "\fBset access_log_level\fR "
Logging level. The default is INFO.
.IP "\fB set log_requests\fR 
Enables request logging. The default is False.
.IP \fBrecheck_account_existence\fR
Cache timeout in seconds to send memcached for account existence. The default is 60 seconds.
.IP \fBrecheck_container_existence\fR
Cache timeout in seconds to send memcached for container existence. The default is 60 seconds.
.IP \fBobject_chunk_size\fR
Chunk size to read from object servers. The default is 8192.
.IP \fBclient_chunk_size\fR
Chunk size to read from clients. The default is 8192.
.IP \fBnode_timeout\fR 
Request timeout to external services. The default is 10 seconds. 
.IP \fBclient_timeoutt\fR 
Timeout to read one chunk from a client. The default is 60 seconds. 
.IP \fBconn_timeout\fR 
Connection timeout to external services. The default is 0.5 seconds. 
.IP \fBerror_suppression_interval\fR 
Time in seconds that must elapse since the last error for a node to 
be considered no longer error limited. The default is 60 seconds.
.IP \fBerror_suppression_limit\fR 
Error count to consider a node error limited. The default is 10. 
.IP \fBallow_account_management\fR 
Whether account PUTs and DELETEs are even callable. If set to 'true' any authorized 
user may create and delete accounts; if 'false' no one, even authorized, can. The default 
is false. 
.IP \fBobject_post_as_copy\fR 
Set object_post_as_copy = false to turn on fast posts where only the metadata changes 
are stored as new and the original data file is kept in place. This makes for quicker 
posts; but since the container metadata isn't updated in this mode, features like 
container sync won't be able to sync posts. The default is True.
.IP \fBaccount_autocreate\fR 
If set to 'true' authorized accounts that do not yet exist within the Swift cluster 
will be automatically created. The default is set to false.
.RE
.PD



.SH DOCUMENTATION
.LP
More in depth documentation about the swift-proxy-server and
also Openstack-Swift as a whole can be found at 
.BI http://swift.openstack.org/admin_guide.html 
and 
.BI http://swift.openstack.org


.SH "SEE ALSO"
.BR swift-proxy-server(1),