-logfile <Name>
Specify log file name
-verbose
Enable verbose log output.
-help
Show a list of the available options and exit normally
-?
Show a list of the available options and exit normally
-h
Show a list of the available options and exit normally
-config <filename>
Specify config file
-chdir <Directory>
Change current working directory.
-console
Console mode (for music playback)
-core
Allow production of core dumps
+core
Do not produce core dumps
-default
Restore default settings
-autostart <Name>
Attach and autostart tape/disk image <name>
-autoload <Name>
Attach and autoload tape/disk image <name>
-1 <Name>
Attach <name> as a tape image
-8 <Name>
Attach <name> as a disk image in drive #8
-9 <Name>
Attach <name> as a disk image in drive #9
-10 <Name>
Attach <name> as a disk image in drive #10
-11 <Name>
Attach <name> as a disk image in drive #11
-directory <Path>
Define search path to locate system files
-menukey <key>
Keycode of the menu activate key
-menukeyup <key>
Keycode of the menu up key
-menukeydown <key>
Keycode of the menu down key
-menukeyleft <key>
Keycode of the menu left key
-menukeyright <key>
Keycode of the menu right key
-menukeyselect <key>
Keycode of the menu select key
-menukeycancel <key>
Keycode of the menu cancel key
-menukeyexit <key>
Keycode of the menu exit key
-menukeymap <key>
Keycode of the menu map key
-saveresourcesonexit
Enable save resource on exit
+saveresourcesonexit
Disable save resource on exit
-confirmonexit
Enable confirm on exit
+confirmonexit
Disable confirm on exit
-statusbar
Enable statusbar
+statusbar
Disable statusbar
-basicload
On autostart, load to BASIC start (without ',1')
+basicload
On autostart, load with ',1'
-autostartwithcolon
On autostart, use the 'RUN' command with a colon, i.e., 'RUN:'
+autostartwithcolon
On autostart, do not use the 'RUN' command with a colon; i.e., 'RUN'
-autostart-handle-tde
Handle True Drive Emulation on autostart
+autostart-handle-tde
Do not handle True Drive Emulation on autostart
-autostart-warp
Enable warp mode during autostart
+autostart-warp
Disable warp mode during autostart
-autostartprgmode
Set autostart mode for PRG files
-autostartprgdiskimage
Set disk image for autostart of PRG files
-autostart-delay
Set initial autostart delay (0: use default)
-autostart-delay-random
Enable random initial autostart delay.
+autostart-delay-random
Disable random initial autostart delay.
-flipname <Name>
Specify name of the flip list file image
-device8 <Type>
Set device type for device #8 (0: NONE, 1: FILESYSTEM, 2: OPENCBM, 3: BLOCK DEVICE)
-device9 <Type>
Set device type for device #9 (0: NONE, 1: FILESYSTEM, 2: OPENCBM, 3: BLOCK DEVICE)
-device10 <Type>
Set device type for device #10 (0: NONE, 1: FILESYSTEM, 2: OPENCBM, 3: BLOCK DEVICE)
-device11 <Type>
Set device type for device #11 (0: NONE, 1: FILESYSTEM, 2: OPENCBM, 3: BLOCK DEVICE)
-attach8ro
Attach disk image for drive #8 read only
-attach8rw
Attach disk image for drive #8 read write (if possible)
-attach9ro
Attach disk image for drive #9 read only
-attach9rw
Attach disk image for drive #9 read write (if possible)
-attach10ro
Attach disk image for drive #10 read only
-attach10rw
Attach disk image for drive #10 read write (if possible)
-attach11ro
Attach disk image for drive #11 read only
-attach11rw
Attach disk image for drive #11 read write (if possible)
-playback
Playback recorded events
-moncommands <Name>
Execute monitor commands from file
-initbreak <value>
Set an initial breakpoint for the monitor
-virtualdev
Enable general mechanisms for fast disk/tape emulation
+virtualdev
Disable general mechanisms for fast disk/tape emulation
-speed
Limit emulation speed to specified value
-refresh <value>
Update every <value> frames (`0' for automatic)
-warp
Enable warp mode
+warp
Disable warp mode
-sdlbitdepth <bpp>
Set bitdepth (0 = current, 8, 15, 16, 24, 32)
-sdllimitmode <mode>
Set resolution limiting mode (0 = off, 1 = max, 2 = fixed)
-sdlcustomw <width>
Set custom resolution width
-sdlcustomh <height>
Set custom resolution height
-pal
Use PAL sync factor
-ntsc
Use NTSC sync factor
-ntscold
Use old NTSC sync factor
-paln
Use PAL-N sync factor
-kernal <Name>
Specify name of Kernal ROM image
-basic <Name>
Specify name of BASIC ROM image
-chargen <Name>
Specify name of character generator ROM image
-kernalrev <Revision>
Patch the Kernal ROM to the specified <revision>
-keymap <number>
Specify index of keymap file (0=sym, 1=symDE, 2=pos)
-symkeymap <Name>
Specify name of symbolic keymap file
-symdekeymap <Name>
Specify name of symbolic German keymap file
-poskeymap <Name>
Specify name of positional keymap file
-ciamodel <Model>
Set both CIA models (0 = old 6526, 1 = new 6526A)
-cia1model <Model>
Set CIA 1 model (0 = old 6526, 1 = new 6526A)
-cia2model <Model>
Set CIA 2 model (0 = old 6526, 1 = new 6526A)
-model <Model>
Set C64 model (c64/c64c/c64old, ntsc/newntsc/oldntsc, drean)
-burstmod <value>
Burst modification (0 = None, 1 = CIA1, 2 = CIA2)
-plus60k
Enable the PLUS60K RAM expansion
+plus60k
Disable the PLUS60K RAM expansion
-plus60kimage <Name>
Specify name of PLUS60K image
-plus60kbase <Base address>
Base address of the PLUS60K expansion
-plus256k
Enable the PLUS256K RAM expansion
+plus256k
Disable the PLUS256K RAM expansion
-plus256kimage <Name>
Specify name of PLUS256K image
-256k
Enable the 256K RAM expansion
+256k
Disable the 256K RAM expansion
-256kimage <Name>
Specify name of 256K image
-256kbase <Base address>
Base address of the 256K expansion
-VICIIvcache
Enable the video cache
+VICIIvcache
Disable the video cache
-VICIIdsize
Enable double size
+VICIIdsize
Disable double size
-VICIIdscan
Enable double scan
+VICIIdscan
Disable double scan
-VICIIaudioleak
Enable audio leak emulation
+VICIIaudioleak
Disable audio leak emulation
-VICIIhwscale
Enable hardware scaling
+VICIIhwscale
Disable hardware scaling
-VICIIfilter <Mode>
Select rendering filter, 0:none, 1:CRT emulation, 2: scale2x
-VICIIintpal
Use an internal calculated palette
-VICIIextpal
Use an external palette (file)
-VICIIpalette <Name>
Specify name of file of external palette
-VICIIfulldevice <device>
Select fullscreen device
-VICIISDLfullmode <Mode>
Select fullscreen mode
-VICIIsaturation <0-2000>
Set saturation of internal calculated palette [1000]
-VICIIcontrast <0-2000>
Set contrast of internal calculated palette [1000]
-VICIIbrightness <0-2000>
Set brightness of internal calculated palette [1000]
-VICIIgamma <0-4000>
Set gamma of internal calculated palette [2200]
-VICIItint <0-2000>
Set tint of internal calculated palette [1000]
-VICIIcrtblur <0-1000>
Amount of horizontal blur for the CRT emulation. [500]
-VICIIcrtscanlineshade <0-1000>
Amount of scan line shading for the CRT emulation [667]
-VICIIoddlinesphase <0-2000>
Set phase for color carrier in odd lines [1250]
-VICIIoddlinesoffset <0-2000>
Set phase offset for color carrier in odd lines [750]
-VICIIborders <Mode>
Set VIC-II border display mode (0: normal, 1: full, 2: debug)
-VICIIchecksb
Enable sprite-background collision registers
+VICIIchecksb
Disable sprite-background collision registers
-VICIIcheckss
Enable sprite-sprite collision registers
+VICIIcheckss
Disable sprite-sprite collision registers
-VICIInewluminance
Use new luminances
+VICIInewluminance
Use old luminances
-sound
Enable sound playback
+sound
Disable sound playback
-soundrate <value>
Set sound sample rate to <value> Hz
-soundbufsize <value>
Set sound buffer size to <value> msec
-soundfragsize <value>
Set sound fragment size (0 = small, 1 = medium, 2 = large)
-sounddev <Name>
Specify sound driver
-soundarg <args>
Specify initialization parameters for sound driver
-soundrecdev <Name>
Specify recording sound driver
-soundrecarg <args>
Specify initialization parameters for recording sound driver
-soundsync <sync>
Set sound speed adjustment (0: flexible, 1: adjusting, 2: exact)
-soundoutput <output mode>
Sound output mode: (0: system decides mono/stereo, 1: always mono, 2: always stereo)
-sidenginemodel <engine and model>
Specify SID engine and model (0: FastSID 6581, 1: FastSID 8580)
-sidstereo <amount>
amount of extra SID chips
-sidstereoaddress <Base address>
Specify base address for 2nd SID
-sidtripleaddress <Base address>
Specify base address for 3rd SID
-sidfilters
Emulate SID filters
+sidfilters
Do not emulate SID filters
-rsuser
Enable RS232 userport emulation
+rsuser
Disable RS232 userport emulation
-rsuserbaud <baud>
Set the baud rate of the RS232 userport emulation.
-rsuserdev <0-3>
Specify VICE RS232 device for userport
-iecdevice4
Enable IEC device emulation for device #4
+iecdevice4
Disable IEC device emulation for device #4
-iecdevice5
Enable IEC device emulation for device #5
+iecdevice5
Disable IEC device emulation for device #5
-iecdevice8
Enable IEC device emulation for device #8
+iecdevice8
Disable IEC device emulation for device #8
-iecdevice9
Enable IEC device emulation for device #9
+iecdevice9
Disable IEC device emulation for device #9
-iecdevice10
Enable IEC device emulation for device #10
+iecdevice10
Disable IEC device emulation for device #10
-iecdevice11
Enable IEC device emulation for device #11
+iecdevice11
Disable IEC device emulation for device #11
-prtxtdev1 <Name>
Specify name of printer text device or dump file
-prtxtdev2 <Name>
Specify name of printer text device or dump file
-prtxtdev3 <Name>
Specify name of printer text device or dump file
-pr4txtdev <0-2>
Specify printer text output device for printer #4
-pr5txtdev <0-2>
Specify printer text output device for printer #5
-prusertxtdev <0-2>
Specify printer text output device for userport printer
-pr4output <Name>
Specify name of output device for device #4
-pr5output <Name>
Specify name of output device for device #5
-pruseroutput <Name>
Specify name of output device for the userport printer
-pr4drv <Name>
Specify name of printer driver for device #4
-pr5drv <Name>
Specify name of printer driver for device #5
-pruserdrv <Name>
Specify name of printer driver for the userport printer
-device4 <Type>
Set device type for device #4 (0: NONE, 1: FS, 2: REAL)
-device5 <Type>
Set device type for device #5 (0: NONE, 1: FS, 2: REAL)
-pruser
Enable the userport printer emulation
+pruser
Disable the userport printer emulation
-mouse
Enable mouse grab
+mouse
Disable mouse grab
-mousetype <value>
Select the mouse type (0 = 1351, 1 = NEOS, 2 = Amiga, 3 = Paddles, 4 = CX-22, 5 = ST, 6 = Smart)
-mouseport <value>
Select the joystick port the mouse is attached to
-lightpen
Enable lightpen emulation
+lightpen
Disable lightpen emulation
-lightpentype <Type>
Set lightpen type
-drive8type <Type>
Set drive type (0: no drive)
-drive8extend <method>
Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
-drive8idle <method>
Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
-drive9type <Type>
Set drive type (0: no drive)
-drive9extend <method>
Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
-drive9idle <method>
Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
-drive10type <Type>
Set drive type (0: no drive)
-drive10extend <method>
Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
-drive10idle <method>
Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
-drive11type <Type>
Set drive type (0: no drive)
-drive11extend <method>
Set drive 40 track extension policy (0: never, 1: ask, 2: on access)
-drive11idle <method>
Set drive idling method (0: no traps, 1: skip cycles, 2: trap idle)
-truedrive
Enable hardware-level emulation of disk drives
+truedrive
Disable hardware-level emulation of disk drives
-drivesound
Enable sound emulation of disk drives
+drivesound
Disable sound emulation of disk drives
-drive8ram2000
Enable 8KB RAM expansion at $2000-$3FFF
+drive8ram2000
Disable 8KB RAM expansion at $2000-$3FFF
-drive8ram4000
Enable 8KB RAM expansion at $4000-$5FFF
+drive8ram4000
Disable 8KB RAM expansion at $4000-$5FFF
-drive8ram6000
Enable 8KB RAM expansion at $6000-$7FFF
+drive8ram6000
Disable 8KB RAM expansion at $6000-$7FFF
-drive8ram8000
Enable 8KB RAM expansion at $8000-$9FFF
+drive8ram8000
Disable 8KB RAM expansion at $8000-$9FFF
-drive8rama000
Enable 8KB RAM expansion at $A000-$BFFF
+drive8rama000
Disable 8KB RAM expansion at $A000-$BFFF
-drive9ram2000
Enable 8KB RAM expansion at $2000-$3FFF
+drive9ram2000
Disable 8KB RAM expansion at $2000-$3FFF
-drive9ram4000
Enable 8KB RAM expansion at $4000-$5FFF
+drive9ram4000
Disable 8KB RAM expansion at $4000-$5FFF
-drive9ram6000
Enable 8KB RAM expansion at $6000-$7FFF
+drive9ram6000
Disable 8KB RAM expansion at $6000-$7FFF
-drive9ram8000
Enable 8KB RAM expansion at $8000-$9FFF
+drive9ram8000
Disable 8KB RAM expansion at $8000-$9FFF
-drive9rama000
Enable 8KB RAM expansion at $A000-$BFFF
+drive9rama000
Disable 8KB RAM expansion at $A000-$BFFF
-drive10ram2000
Enable 8KB RAM expansion at $2000-$3FFF
+drive10ram2000
Disable 8KB RAM expansion at $2000-$3FFF
-drive10ram4000
Enable 8KB RAM expansion at $4000-$5FFF
+drive10ram4000
Disable 8KB RAM expansion at $4000-$5FFF
-drive10ram6000
Enable 8KB RAM expansion at $6000-$7FFF
+drive10ram6000
Disable 8KB RAM expansion at $6000-$7FFF
-drive10ram8000
Enable 8KB RAM expansion at $8000-$9FFF
+drive10ram8000
Disable 8KB RAM expansion at $8000-$9FFF
-drive10rama000
Enable 8KB RAM expansion at $A000-$BFFF
+drive10rama000
Disable 8KB RAM expansion at $A000-$BFFF
-drive11ram2000
Enable 8KB RAM expansion at $2000-$3FFF
+drive11ram2000
Disable 8KB RAM expansion at $2000-$3FFF
-drive11ram4000
Enable 8KB RAM expansion at $4000-$5FFF
+drive11ram4000
Disable 8KB RAM expansion at $4000-$5FFF
-drive11ram6000
Enable 8KB RAM expansion at $6000-$7FFF
+drive11ram6000
Disable 8KB RAM expansion at $6000-$7FFF
-drive11ram8000
Enable 8KB RAM expansion at $8000-$9FFF
+drive11ram8000
Disable 8KB RAM expansion at $8000-$9FFF
-drive11rama000
Enable 8KB RAM expansion at $A000-$BFFF
+drive11rama000
Disable 8KB RAM expansion at $A000-$BFFF
-dos1541 <Name>
Specify name of 1541 DOS ROM image
-dos1541II <Name>
Specify name of 1541-II DOS ROM image
-dos1570 <Name>
Specify name of 1570 DOS ROM image
-dos1571 <Name>
Specify name of 1571 DOS ROM image
-dos1581 <Name>
Specify name of 1581 DOS ROM image
-dos2000 <Name>
Specify name of 2000 DOS ROM image
-dos4000 <Name>
Specify name of 4000 DOS ROM image
-parallel8 <Type>
Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)
-drive8profdos
Enable Professional DOS
+drive8profdos
Disable Professional DOS
-drive8supercard
Enable SuperCard+
+drive8supercard
Disable SuperCard+
-parallel9 <Type>
Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)
-drive9profdos
Enable Professional DOS
+drive9profdos
Disable Professional DOS
-drive9supercard
Enable SuperCard+
+drive9supercard
Disable SuperCard+
-parallel10 <Type>
Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)
-drive10profdos
Enable Professional DOS
+drive10profdos
Disable Professional DOS
-drive10supercard
Enable SuperCard+
+drive10supercard
Disable SuperCard+
-parallel11 <Type>
Set parallel cable type (0: none, 1: standard, 2: Dolphin DOS 3, 3: Formel 64)
-drive11profdos
Enable Professional DOS
+drive11profdos
Disable Professional DOS
-drive11supercard
Enable SuperCard+
+drive11supercard
Disable SuperCard+
-profdos1571 <Name>
Specify name of Professional DOS 1571 ROM image
-supercard <Name>
Specify name of SuperCard+ ROM image
-dos2031 <Name>
Specify name of 2031 DOS ROM image
-dos2040 <Name>
Specify name of 2040 DOS ROM image
-dos3040 <Name>
Specify name of 3040 DOS ROM image
-dos4040 <Name>
Specify name of 4040 DOS ROM image
-dos1001 <Name>
Specify name of 1001/8050/8250 DOS ROM image
-dsresetwithcpu
Enable automatic Datasette-Reset
+dsresetwithcpu
Disable automatic Datasette-Reset
-dszerogapdelay <value>
Set delay in cycles for a zero in the tap
-dsspeedtuning <value>
Set number of cycles added to each gap in the tap
-gluelogictype <Type>
Set glue logic type (0 = discrete, 1 = 252535-01)
-userportrtc
Enable Userport DAC for sound output
+userportrtc
Disable Userport DAC for sound output
-iocollision <method>
Select the way the I/O collisions should be handled, (0: error message and detach all involved carts, 1: error message and detach last attached involved carts, 2: warning in log and 'AND' the valid return values
-mmc64
Enable the MMC64 expansion
+mmc64
Disable the MMC64 expansion
-mmc64bios <Name>
Specify name of MMC64 BIOS image
-mmc64image <Name>
Specify name of MMC64 image
-mmc64readonly
Set the MMC64 card to read-only
-mmc64readwrite
Set the MMC64 card to read/write
-mmc64bioswrite
Save the MMC64 bios when changed
-ieee488
Enable the IEEE488 interface emulation
+ieee488
Disable the IEEE488 interface emulation
-ieee488image <Name>
specify IEEE488 interface image name
-dqbb
Enable Double Quick Brown Box
+dqbb
Disable Double Quick Brown Box
-dqbbimage <Name>
Specify Double Quick Brown Box filename
-dqbbimagerw
Allow writing to DQBB image
+dqbbimagerw
Do not write to DQBB image
-expert
Enable the Expert Cartridge
+expert
Disable the Expert Cartridge
-expertimagename <Name>
Set Expert Cartridge image name
-expertimagerw
Allow writing to Expert Cartridge image
+expertimagerw
Do not write to Expert Cartridge image
-isepic
Enable the ISEPIC cartridge
+isepic
Disable the ISEPIC cartridge
-isepicimagename <Name>
Set ISEPIC image name
-isepicimagerw
Allow writing to ISEPIC image
+isepicimagerw
Do not write to ISEPIC image
-ramcart
Enable the RamCart expansion
+ramcart
Disable the RamCart expansion
-ramcartsize <size in KB>
Size of the RAMCART expansion
-ramcartimage <Name>
Specify name of RAMCART image
-ramcartimagerw
Allow writing to RAMCart image
+ramcartimagerw
Do not write to RAMCart image
-miditype <0-4>
MIDI interface type (0: Sequential, 1: Passport, 2: DATEL, 3: Namesoft, 4: Maplin)
-midi
Enable MIDI emulation
+midi
Disable MIDI emulation
-midiin Name
Specify MIDI-In device
-midiout Name
Specify MIDI-Out device
-digimax
Enable the DigiMAX cartridge
+digimax
Disable the DigiMAX cartridge
-digimaxbase <Base address>
Base address of the DigiMAX cartridge
-ds12c887rtc
Enable the DS12C887 RTC cartridge
+ds12c887rtc
Disable the DS12C887 RTC cartridge
-ds12c887rtcbase <Base address>
Base address of the DS12C887 RTC cartridge
-georam
Enable the GEO-RAM expansion unit
+georam
Disable the GEO-RAM expansion unit
-georamsize <size in KB>
Size of the GEORAM expansion unit
-georamimage <Name>
Specify name of GEORAM image
-georamimagerw
Allow writing to GEORAM image
+georamimagerw
Do not write to GEORAM image
-reu
Enable the RAM Expansion Unit
+reu
Disable the RAM Expansion Unit
-reusize <size in KB>
Size of the RAM expansion unit
-reuimage <Name>
Specify name of REU image
-reuimagerw
Allow writing to REU image
+reuimagerw
Do not write to REU image
-sfxse
Enable the SFX Sound Expander cartridge
+sfxse
Disable the SFX Sound Expander cartridge
-sfxsetype <Type>
Set YM chip type (3526 / 3812)
-sfxss
Enable the SFX Sound Sampler cartridge
+sfxss
Disable the SFX Sound Sampler cartridge
-easyflashjumper
Enable EasyFlash jumper
+easyflashjumper
Disable EasyFlash jumper
-easyflashcrtwrite
Enable writing to EasyFlash .crt image
+easyflashcrtwrite
Disable writing to EasyFlash .crt image
-IDE64image1 <Name>
Specify name of IDE64 image file
-IDE64image2 <Name>
Specify name of IDE64 image file
-IDE64image3 <Name>
Specify name of IDE64 image file
-IDE64image4 <Name>
Specify name of IDE64 image file
-IDE64cyl1 <value>
Set number of cylinders for the IDE64 emulation
-IDE64cyl2 <value>
Set number of cylinders for the IDE64 emulation
-IDE64cyl3 <value>
Set number of cylinders for the IDE64 emulation
-IDE64cyl4 <value>
Set number of cylinders for the IDE64 emulation
-IDE64hds1 <value>
Set number of heads for the IDE64 emulation
-IDE64hds2 <value>
Set number of heads for the IDE64 emulation
-IDE64hds3 <value>
Set number of heads for the IDE64 emulation
-IDE64hds4 <value>
Set number of heads for the IDE64 emulation
-IDE64sec1 <value>
Set number of sectors for the IDE64 emulation
-IDE64sec2 <value>
Set number of sectors for the IDE64 emulation
-IDE64sec3 <value>
Set number of sectors for the IDE64 emulation
-IDE64sec4 <value>
Set number of sectors for the IDE64 emulation
-IDE64autosize1
Autodetect image size
+IDE64autosize1
Do not autodetect geometry of formatted images
-IDE64autosize2
Autodetect image size
+IDE64autosize2
Do not autodetect geometry of formatted images
-IDE64autosize3
Autodetect image size
+IDE64autosize3
Do not autodetect geometry of formatted images
-IDE64autosize4
Autodetect image size
+IDE64autosize4
Do not autodetect geometry of formatted images
-IDE64version4
Emulate version 4 hardware
+IDE64version4
Emulate pre version 4 hardware
-mmcrrescue
Enable MMC Replay rescue mode
+mmcrrescue
Disable MMC Replay rescue mode
-mmcrimagerw
Allow writing to MMC Replay image
+mmcrimagerw
Do not write to MMC Replay image
-mmcrcardimage <filename>
Specify MMC Replay card image filename
-mmcrcardrw
Enable writes to MMC Replay card image
+mmcrcardrw
Disable writes to MMC Replay card image
-mmcreepromimage
Specify MMC Replay EEPROM image filename
-mmcreepromrw
Enable writes to MMC Replay EEPROM image
+mmcreepromrw
Disable writes to MMC Replay EEPROM image
-rrbioswrite
Enable saving of the RR ROM at exit
+rrbioswrite
Disable saving of the RR ROM at exit
-rrbankjumper
Set RR Bank Jumper
+rrbankjumper
Unset RR Bank Jumper
-rrflashjumper
Set RR Flash Jumper
+rrflashjumper
Unset RR Bank Jumper
-cart8 <Name>
Attach raw 8KB cartridge image
-cart16 <Name>
Attach raw 16KB cartridge image
-cartultimax <Name>
Attach generic 16kB Ultimax cartridge image
-cartcrt <Name>
Attach CRT cartridge image
-cartap <Name>
Attach raw 32KB Atomic Power cartridge image
-cartar2 <Name>
Attach raw 16kB Action Replay MK2 cartridge image
-cartar3 <Name>
Attach raw 16KB Action Replay MK3 cartridge image
-cartar4 <Name>
Attach raw 32KB Action Replay MK4 cartridge image
-cartar5 <Name>
Attach raw 32KB Action Replay cartridge image
-cartcap <Name>
Attach raw 8kB Capture cartridge image
-cartcomal <Name>
Attach raw 64kB Comal 80 cartridge image
-cartdep256 <Name>
Attach raw Dela EP256 cartridge image
-cartdep64 <Name>
Attach raw Dela EP64 cartridge image
-cartdep7x8 <Name>
Attach raw Dela EP7x8 cartridge image
-cartdin <Name>
Attach raw 128kB Dinamic cartridge image
-cartdsm <Name>
Attach raw 8kB Diashow-Maker cartridge image
-cartdqbb <Name>
Attach raw 16kB Double Quick Brown Box cartridge image
-carteasy <Name>
Attach raw EasyFlash cartridge image
-cartepyx <Name>
Attach raw 8KB Epyx FastLoad cartridge image
-cartexos <Name>
Attach raw 8kB EXOS cartridge image
-cartexpert <Name>
Attach raw 8kB Expert Cartridge image
-cartf64 <Name>
Attach raw 32kB Formel 64 image
-cartfc1 <Name>
Attach raw 16kB Final Cartridge image
-cartfc3 <Name>
Attach raw 64kB Final Cartridge III image
-cartfcplus <Name>
Attach raw 32kB Final Cartridge Plus image
-cartff <Name>
Attach raw 8kB Freeze Frame image
-cartfm <Name>
Attach raw 32kB Freeze Machine image
-cartfp <Name>
Attach raw 128kB Fun Play/Power Play cartridge image
-cartgk <Name>
Attach raw 8KB Game Killer cartridge image
-cartgeoram <Name>
Attach raw GEO-RAM cartridge image
-cartgs <Name>
Attach raw 512kB Game System cartridge image
-cartide64 <Name>
Attach raw 64KB IDE64 cartridge image
-cartieee <Name>
Attach IEEE-488 Interface cartridge image
-cartisepic <Name>
Attach raw 2kB ISEPIC cartridge image
-cartkcs <Name>
Attach raw 16kB KCS Power cartridge image
-cartks <Name>
Attach raw 24kB Kingsoft cartridge image
-cartmach5 <Name>
Attach raw 8kB MACH 5 cartridge image
-cartmd <Name>
Attach raw 32/64/128kB Magic Desk cartridge image
-cartmf <Name>
Attach raw Magic Formel cartridge image
-cartmikro <Name>
Attach raw 8kB Mikro Assembler cartridge image
-cartmmc64 <Name>
Attach raw 8kB MMC64 cartridge image
-cartmmcr <Name>
Attach raw 512kB MMC Replay cartridge image
-cartmv <Name>
Attach raw 16kB Magic Voice cartridge image
-cartocean <Name>
Attach raw Ocean cartridge image
-cartpf <Name>
Attach raw 64KB Pagefox cartridge image
-cartp64 <Name>
Attach raw 256KB Prophet 64 cartridge image
-cartramcart <Name>
Attach raw RamCart cartridge image
-cartreu <Name>
Attach raw REU cartridge image
-cartrep256 <Name>
Attach raw REX EP256 cartridge image
-cartross <Name>
Attach raw 16/32kB ROSS cartridge image
-cartrr <Name>
Attach raw 64KB Retro Replay cartridge image
-cartru <Name>
Attach raw 8kB REX Utility cartridge image
-carts64 <Name>
Attach raw 4kB Snapshot 64 cartridge image
-cartsb <Name>
Attach raw Structured Basic cartridge image
-cartse5 <Name>
Attach raw 16kB Super Explode V5 cartridge image
-cartsg <Name>
Attach raw 64kB Super Games cartridge image
-cartsilver <Name>
Attach raw Silverrock 128 cartridge image
-cartsimon <Name>
Attach raw 16kB Simons Basic cartridge image
-cartss4 <Name>
Attach raw 32KB Super Snapshot V4 cartridge image
-cartss5 <Name>
Attach raw 64KB Super Snapshot V5 cartridge image
-cartstar <Name>
Attach raw 16KB Stardos cartridge image
-cartwl <Name>
Attach raw 16KB Westermann Learning cartridge image
-cartws <Name>
Attach raw 8kB Warp Speed cartridge image
-cartzaxxon <Name>
Attach raw 16kB Zaxxon cartridge image
-cartreset
Reset machine if a cartridge is attached or detached
+cartreset
Do not reset machine if a cartridge is attached or detached
+cart
Disable default cartridge
-fs8 <Name>
Use <name> as directory for file system device #8
-fs9 <Name>
Use <name> as directory for file system device #9
-fs10 <Name>
Use <name> as directory for file system device #10
-fs11 <Name>
Use <name> as directory for file system device #11
-joydev1 <0-4>
Set device for joystick port 1
-joydev2 <0-4>
Set device for joystick port 2
-extrajoydev1 <0-4>
Set device for extra joystick port 1
-extrajoydev2 <0-4>
Set device for extra joystick port 2
-keybuf <string>
Put the specified string into the keyboard buffer.
-raminitstartvalue <value>
Set the value for the very first RAM address after powerup
-raminitvalueinvert <num of bytes>
Length of memory block initialized with the same value
-raminitpatterninvert <num of bytes>
Length of memory block initialized with the same pattern
-doodleoversize <method>
Select the way the oversized input should be handled, (0: scale down, 1: crop left top, 2: crop center top, 3: crop right top, 4: crop left center, 5: crop center, 6: crop right center, 7: crop left bottom, 8: crop center bottom, 9: crop right bottom)
-doodlemc <method>
Select the way the multicolor to hires should be handled, (0: b&w, 1: 2 colors, 2: 4 colors, 3: gray scale, 4: best cell colors)
-doodletedlum <method>
Select the way the TED luminosity should be handled, (0: ignore, 1: dither)
-doodlecrtctextcolor <color>
Select the CRTC text color (0: white, 1: amber, 2: green)
-remotemonitor
Enable remote monitor
+remotemonitor
Disable remote monitor
-remotemonitoraddress <Name>
The local address the remote monitor should bind to Available command-line options: