| layout | title |
|---|---|
post |
manual of operation of the lid-driven cavity motor |
-
from the controller exit five cables red , white , rs232 , and two gray cables to the motor
-
in order to use the motor and the controller
(important-- it must been done in this order)
: * a) plug the white cabel to power * b) turn on DC power supply ( it must be on 24 v ) * c) plug the rs232 to David's PC
-
Program
- a) click on the shortcut SEPLink ( in middle up of the Desktop ( when program window opens you must click on Done without changing anything )).
- b) program screen is divided into four parts at the upper right window you should see two green lamps connect and online
- c) command window (down left window called Terminal)
the basic commands are: ( _ comes instead of spacebar ) j_50 ( the wanted rpm can be positive and negative )
j_0 in order to stop
: * d) relation of the teeth quantity between big and small gear is 36 to 14,
thikness of the band is 2mm ,shaft radius is 20mm
![v[m/s]=1.426*10 sqr(-4) * omega [rpm]][1]
Lateral mode is the movement of the belt right/left (in respect to the main direction). David has measured the 10 periods from which we can derive the following result: Google spreadsheet
The length of the belt is 103 cm (David, 25.02.10)