.Xrc

! E8KM2Ocw:~/.Xrc by PipStuart <Pip@CPAN.Org> to start having some additional xterm && maybe urxvt or aterm settings on Aku. According to this 2014 site:
! $VERSION='0.0';$d8VS='K2FLCrE8'; HTTPS://Wiki.ArchLinux.Org/index.php/x_resources .Xdefaults is deprec8d for .Xresources (or my .Xrc) wich requires xorg-xrdb
!   be installed 2run:`xrdb ~/.Xrc`; If I someday return to using `startx`, I will probably need to add2 my ~/.xinitrc "[[ -f ~/.Xrc ]] && xrdb -merge ~/.Xrc".
!   See default settings for installed X11 apps in /usr/share/X11/app-defaults (if exists) && see curNtly loaded resources with `xrdb -query -all`. Just `xrc`.
!   Comment must start bang !, not hash #. Maybe `xrdb -remove .Xrc` will rm these vals from server while -n -merge will Not merge but shows what would happen.
! `for T in `find /usr/share/terminfo -type f -printf '%f '`;do echo "$T `tput -T $T colors`";done|sort -nk2` shows a ton of supported terms to maybe try:
!     Eterm-88color    Eterm-256color      mlterm-256color    putty-256color           screen-256color-s    Probably test:Eterm,aterm,urxvt,konsole,vte,
!     rxvt-88color     gnome-256color      mrxvt-256color     rxvt-256color            terminator             terminator,nsterm,mrxvt,mlterm,putty,iTerm
!     xterm-88color    iTerm.app           nsterm             rxvt-unicode-256color    vte-256color   agi eterm aterm rxvt-unicode-256color xvt evilvte tilda
!     xterm+88color    konsole-256color    nsterm-256color    screen-256color-bce-s    xterm+256color   lxterminal sakura pterm (konsole wudpull2much KDEstuf)
! E8PMMMMM:Ubu srch"term"rsltz:gnome-terminal(Terminal),pterm(PuTTY Terminal),u?rxvt(-unicode)?,u?xterm,evilvte(recfg reqs recompIl8ion);
! E8RM7bZB:Eterm from my old zsh Et alias with few custom parameters flickers constantly && is terribly slow to upd8, Menus are hard to select too.
!          aterm worked rel8ively fine once but was a little slow (especially scrolling) && starts with a bunch of weird backslashes && now won^t respond,
!          urxvt works fine && has a ton of options to fiddle with l8r,
!            xvt works but defaulted to displaying only in green (with or without bold) && starts with backslashes like aterm (but can load XTerm resources),
!        evilvte works fast && similarly to my xterm but apparently configur8ion is done by editing source && recompiling (but view with `showvte` command),
!     lxterminal started pretty nicely but going to the menu Edit > Preferences spit 3 lines of Gtk-WARNING Unknown property: GtkTable.valign
!             && it writes a sparse ~/.config/lxterminal/lxterminal.conf,
!         sakura started nicely with~/.config/sakura/sakura.conf && is based on GTK+ && VTE but has few dependencies && does not require full GNOME desktop,
!          pterm prints constant GLib-CRITICAL Source ID \d+ was not found when attempting to remove it errors with every key press (but looks workable)
!             && apparently Ubu14.04 GLib has begun spewing errors for applic8ions that call some function twice improperly so maybe need to w8 4 a l8r fix,
! EC6L7Qr7:pterm, sakura, evilvte, lxterminal, xterm, && Eterm sEm2wrk nice,urxvt nEded rvrsVid,xvt just grayz,aterm frEzez@zsh prmpt; aftr `xrdb .Xrc`:
!   rxvt(-unicode)? looking good like pterm,urxvt good wIdr 160x50,xvt grEnz,aterm still frEzez;
!   Display all 256 colors across screen fast (although my GnomTerm && XTerm currently only show first 8 with bright colors && none on the rest) with:
!     `(x=`tput op` y=`printf %76s`;for i in {0..256};do o=00$i;echo -e ${o:${#o}-3:3} `tput setaf $i;tput setab $i`${y// /=}$x;done)`
! G7LM8px7:Running Ctrl-Alt-t Ubu keyboard shortcut to open a terminal then `p h p$PPID o cmd` printz '/usr/bin/python /usr/bin/x-terminal-emulator' && it has
!   a bright red top-bar with a group menu button. This suggests it should be feasible to develop similar VTE-based terminal emul8or entirely in Perl someday.
!   Curiously, `echo $TERM`:'xterm'; while most of my other termz now report 'xterm-256color'. Then `echo $COLORTERM`:'gnome-terminal'; which is no longer
!   exported from recent versions of GnomTerm, so maybe this was forked a while back? 4um posterz recommend now testing for $VTE_VERSION instead of $COLORTERM.
!   x-terminal-emulator has no $VTE_VERSION but most of my terminalz now print it as '4205'. `m x-terminal-emulator` showed a 2008 man page for terminator but
!   it looks like it has seen some active LaunchPad development since then. Ckot mlterm,roxterm,aterm-ml,mrxvt,rxvt-ml,yeahconsole,st[jt]erm,xfce4-terminal;
! G8RMHBpu:Installed mate-terminal, qterminal, && GNUstep terminal.app as well as vttest&&tmate 2also tSt AgNst alongside stterm && stjerm,&&instld lilyterm;
*background:                    black
*foreground:                    grey90
! Many of these settings were originally gleaned from: HTTP://X.Org/archive/X11R6.8.1/doc/xterm.1.html but `man xterm` describes all available resources;
XTerm*Background:               black
XTerm*Foreground:               green
XTerm*Scrollbar.Background:     black
XTerm*Scrollbar.Foreground:     dark blue
XTerm*Border:                   navy blue
XTerm*VT100.geometry:           160x50
! Honor the VT102 DECCOLM code to switch 80 to 132 columns (might need to be in class C132 also?):
XTerm*VT100.c132:               true
! Below should allow dtterm ops like resize or reposition.
XTerm*VT100.allowWindowOps:     true
XTerm*VT100.allowFontOps:       true
XTerm*VT100.allowTcapOps:       true
! From man page, if you prefer using the left mouse button for dragging the scrollbar thumb, that can be set up by altering the transl8ions resource, e.g.,
XTerm*VT100.Scrollbar.translations:  #override                                      \n\
  <Btn5Down>:                   StartScroll( Forward    )                           \n\
  <Btn1Down>:                   StartScroll(Continuous  ) MoveThumb() NotifyThumb() \n\
  <Btn4Down>:                   StartScroll(Backward    )                           \n\
  <Btn1Motion>:                                           MoveThumb() NotifyThumb() \n\
  <BtnUp>:                     NotifyScroll(Proportional)               EndScroll()
! Specifies whether or not escape sequences to change colors assigned to different attributes are recognized (default might be false?):
XTerm*dynamicColors:            true
!XTerm*faceName:                 Terminus:style=Regular:size=8
!XTerm*VT100.font:               -*-dina-medium-r-*-*-16-*-*-*-*-*-*-*  ! Default font:fixed && faceSize:14 && faceName eg. had size=10 (7 or 8 fit well)
! maybe below can set class Font5 corresponding to "Large" in the standard menu (Control-RightClick [Button3])
!XTerm.VT100.UTF8Fonts.font:     font5
!XTerm*faceSize:                 8
! Changing Size above does not seem to alter anything. Might want to try below l8r instead (with 8x16 instead of 7x13 that I had for a while before?):
! When I tried comma-sepR8ing Liber8ion,Hack,&&Courier below xt spewed: "too many fonts for fNorm, ignoring ..." so trying just Hack for now
!XTerm*faceName:                 x:fixed,Liberation Mono:size=8:antialias=true,Hack:size=8:antialias=true,Courier 10 Pitch:size=10:antialias=true
XTerm*faceName:                 x:fixed,Hack:size=8:antialias=true
!XTerm*VT100.font:               8x16
!      faceName (class FaceName) specifies pattern 4 scalable fonts selected from FreeType lib if support compiled in. No default val. multi fonts comma-sep.
! Prefix “x:” or “x11:” applies to XLFD font resource. "xft:" or missing prefix means TrueType. example: XTerm*faceName: x:fixed,xft:Bitstream Vera Sans Mono
! Ifno faceName resource specified, or if no match for both TrueType normal && bold fonts, xterm uses the XLFD (bitmap) font && rel8d resources.
! May find bitmap fonts using: #!/bin/sh\nFONT=`xfontsel -print`;test -n "$FONT" && xfd -fn "$FONT"; # or try `fc-list :scalable=true:spacing=mono: family`;
!   Bitstream Vera Sans Mono  !  Courier 10 Pitch  !  DejaVu Sans Mono  !  Fira Code,Fira Code Light,Fira Code Medium,Fira Code Retina  !  FreeMono
!   Hack  !  Inconsolata  !  Liberation Mono  !  Mitra Mono  !  Nimbus Mono L  !  Noto Mono,Noto Color Emoji  !  Tlwg Mono,Tlwg Typo  !  Ubuntu Mono
! If locale settings are correct for UTF-8, the following makes xterm interpret all incoming data as UTF-8 encoded: (should learn more about u8 && utf8)
!XTerm*locale:                   true
XTerm*utf8:                     2
! Specifies whether or not control sequences sent by the terminal should be 8-bit characters or escape sequences (default false, true mkz arowkeyz!work):
XTerm*eightBitControl:          false
XTerm*eightBitInput:            true
XTerm*scrollBar:                true
XTerm*rightScrollBar:           true
XTerm*saveLines:                65536
XTerm*scrollKey:                true
XTerm*scrollTtyOutput:          false
XTerm*jumpScroll:               true
XTerm*multiScroll:              true
! Default cursorBlink false, On 600, Off 300 milliseconds (with command-line parameters -bc -bcn 512 -bcf 256)
XTerm*cursorBlink:              true
XTerm*cursorOnTime:             512
XTerm*cursorOffTime:            256
XTerm*appCursorDefault:         true
XTerm*appKeyPadDefault:         true
XTerm*toolBar:                  true
XTerm*titleBar:                 true
XTerm*textUnderIcon:            true
XTerm*allowIconInput:           true
XTerm*autoRaise:                true
! Might need the following to get Alt keyboard shortcuts to work?
!XTerm*metaSendsEscape:          true
XTerm*termName:                 xterm-256color
!XTerm*termtype:                 vt100
!XTerm*ttyModes:                 intr ^c erase ^h susp ^@ dsusp ^@ kill ^u eof ^d
! xterm understands all of the core X Toolkit resource names and classes. Application specific resources (e.g., “XTerm.$rName”) follow:
!backarrowKeyIsErase (class BackarrowKeyIsErase): Tie VTxxx backarrowKey && ptyInitialErase resources together by setting DECBKM st8 according to whether
!  initial value of stty erase is backspace (8) or delete (127) character. “false” value disables this feature.  Default is “true”.
!fullscreen          (class Fullscreen         ): Specifies whether xterm should ask window manager to use fullscreen layout on startup.
!  Xterm accepts either a keyword (ignoring case) or the number shown in parentheses:
!    false  (0) Fullscreen layout is not used initially, but may    be          later via menu-selection or control sequence. Default is "false".
!    true   (1) Fullscreen layout is     used initially, but may    be disabled later via menu-selection or control sequence.
!    always (2) Fullscreen layout is     used initially, and cannot be disabled later via menu-selection or control sequence.
!    never  (3) Fullscreen layout is not used          , and cannot be  enabled later via menu-selection or control sequence.
!hold (class Hold): If true, xterm will not immeD8ly destroy its window when the shell command completes. It will w8 until the window manager is used to
!  destroy/kill the window, or if you use the menu entries that send a signal, e.g., HUP or KILL. You may scroll back, select text, etc., to perform most
!  graphical operations. Resizing the display will lose data, however, since this involves interaction with the shell which is no longer running.
!hpFunctionKeys      (class HpFunctionKeys     ): Specifies whether HP FunctionKey escape codes should B gener8d 4 F-keys instead of standard escape sequences.
!  See also the keyboardType resource.
!iconGeometry        (class IconGeometry       ): Specifies preferred size && position of applic8ion when iconified. Not necSarily obeyed by all window mngrz.
!iconHint            (class IconHint           ): Specifies an icon which will be added to the window manager hints. xterm provides no default value. Set this
!  resource to “none” to omit hint entirely, using whatever window manager may decide. If the iconHint resource is given (or is set via the -n option) xterm
!  searches for a pixmap file with that name, in the current directory as well as /usr/share/pixmaps, if resource does not specify absolute pathname. In each
!  case, xterm adds “_48x48” and/or “.xpm” to filename after trying without. If able to load file, xterm sets the window manager hint for the icon-pixmap.
!  These pixmaps are distributed with xterm, and can optionally be compiled-in:
!    ·     mini.xterm_16x16,  mini.xterm_32x32,  mini.xterm_48x48
!    ·   filled-xterm_16x16 filled-xterm_32x32 filled-xterm_48x48
!    ·          xterm_16x16        xterm_32x32        xterm_48x48
!    ·    xterm-color_16x16  xterm-color_32x32  xterm-color_48x48
!  In either case, xterm allows for adding a “_48x48” to specify largest of pixmaps as a default. That is, “mini.xterm” is same as “mini.xterm_48x48”.
!  If no explicit iconHint resource is given (or if none of the compiled-in names matches), xterm uses “mini.xterm” (which is always compiled-in).
!  The iconHint resource has no effect on “desktop” files, including “panel” and “menu”. Those are typically set via a “.desktop” file; xterm provides samples
!    for itself (and the uxterm script). The more capable desktop systems allow changing the icon on a per-user basis.
!iconName            (class IconName           ): Specifies label 4 xterm when iconified. no default value; some window mngrz may assume the applic8ion name,
!  e.g., “xterm”. Setting iconName resource sets icon label unless overridden by zIconBeep or control sequences which change the window and icon labels.
!keyboardType        (class KeyboardType       ): Enables one (or none) of various keyboard-type resources: hpFunctionKeys, scoFunctionKeys, sunFunctionKeys,
!  tcapFunctionKeys, && sunKeyboard. Resource^s value should be one of the corresponding strings “hp”, “sco”, “sun”, “tcap”, or “vt220”. Individual resources
!  are provided for legacy support; this resource is simpler to use. Default is “unknown”, i.e., none of the assoC8d resources are set via this resource.
!maxBufSize          (class MaxBufSize         ): Specify maximum size of input buffer. Default is “32768”. This cannot be set to value less than minBufSize.
!  It will be increased as needed to make that value evenly divide this one. On some systems you may want to increase one or both the min && maxBufSize to
!    achieve better performance if the oper8ing system prefers larger buffer sizes.
!maximized           (class Maximized          ): Specifies whether xterm should ask window manager to maximize its layout on startup. Default is “false”.
!messages            (class Messages           ): Specifies whether write access to terminal is allowed initially. See mesg(1).        Default is  “true”.
!menuLocale          (class MenuLocale         ): Specify locale used for character-set comput8ionz when loading popup menus. Use this to improve initializ8ion
!  performance of the Athena popup menus, which may load unnecessary (and very large) fonts, e.g., in a locale having UTF-8 encoding. Default is “C” (POSIX).
!  To use current locale (only useful if you have localized the resource settings for the menu entries), set the resource to an empty string.
!minBufSize          (class MinBufSize         ): Minimum size of input buffer, i.e., amount of d8a that xterm requests on each read.  Default is  “4096”.
!  Cannot be set to a value less than 64.
!omitTranslation     (class OmitTranslation    ): Selectively omit one or more parts of xterm^s default transl8ionz at startup. Resource value is comma-sepR8d
!  list of keywords, which may be abbreviated: “fullscreen”, “scroll-lock”, “shift-fonts”, or “wheel-mouse”. Xterm also recognizes “default”, but omitting that
!  will make the program unusable unless you provide a similar definition in your resource settings.
!ptyHandshake        (class PtyHandshake       ): If “true”, xterm performs handshaking during initializ8ion to ensure that parent and child processes upd8 the
!  utmp and stty st8. See also waitForMap which w8z for pseudo-terminal^s notion of screen size, && ptySttySize which resets screen size after other terminal
!  initializ8ion is complete. Default is “true”.
!ptyInitialErase     (class PtyInitialErase    ): If “true”, xterm uses pseudo-terminal^s sense of stty erase value. If “false”, xterm sets stty erase value to
!  match its own configur8ion, using the kb string from the termcap entry as a reference, if available. In either case, the result is applied to the TERMCAP
!  variable which xterm sets.  See also the ttyModes resource, which may modify this. Default is “false”.
!ptySttySize         (class PtySttySize        ): If “true”, xterm resets screen size after terminal init is complete. This is needed for some systems whose
!  pseudo-terminals cannot propag8 terminal characteristics. Where it is not needed, it can interfere with other methods for setting the initial screen size,
!  e.g., via window manager interaction.  See also waitForMap which w8z for a handshake-message giving the pseudo-terminal^s notion of the screen size.
!  Default is “false” on Linux and OS X systems, “true” otherwise.
!sameName            (class SameName           ): If “true”, xterm does not send title and icon name change requests when the request would have no effect: the
!  name is not changed. This has the advantage of preventing flicker and the disadvantage of requiring an extra round trip to the server to find out the
!  previous value. In practice this should never be a problem. Default is “true”.
!scaleHeight         (class ScaleHeight        ): Scale line-height values by resource value, which is limited to “0.9” to “1.5”. Default is “1.0”.
!  While this resource applies to either bitmap or TrueType fonts, its main purpose is to help workaround incompatible changes in Xft library^s font metrics.
!  Xterm checks font metrics to find what the library claims are the bounding boxes for each glyph (character). However, some of Xft^s features (such as the
!  autohinter) can cause glyphs to be scaled larger than bounding boxes, and be partly overwritten by next row.  See useClipping for a rel8d resource.
!scoFunctionKeys     (class ScoFunctionKeys    ): Whether SCO Function Key escape codes should be gener8d for F-keys.  See also keyboardType resource.
!sessionMgt          (class SessionMgt         ): If “true”, xterm sets up session manager callbacks for XtNdieCallback && XtNsaveCallback. Default is “true”.
!sunFunctionKeys     (class SunFunctionKeys    ): Whether Sun Function Key escape codes should be gener8d.  *note*: Above "XtN" are literal &&R!my abrEV8ionz;
!sunKeyboard         (class SunKeyboard        ): Whether Sun/PC keyboard layout should be assumed rather than DEC VT220. This causes keypad "+" to be mapped
!  to "," && Ctrl F1-F12 to F11-F20, depending on setting of ctrlFKeys, so xterm emul8z DEC VT220 more accurately. Otherwise (with default "false"), xterm
!  uses PC-style bindings for function keys and keypad. PC-style bindings use Shift, Alt, Control, && Meta keys as modifiers for function-keys and keypad (see
!  the document Xterm Control Sequences for details). PC-style bindings are analogous to PCTerm, but not the same thing. Normally these bindings do not
!  conflict with use of Meta key as described for eightBitInput resource. If they do, note that PC-style bindings are evalU8d first. See also keyboardType.
!tcapFunctionKeys    (class TcapFunctionKeys   ): Whether function key escape codes read from the termcap/terminfo entry should be gener8d for function keys
!  instead of standard escape sequences. Default is “false”, i.e., this feature is disabled.  See also the keyboardType resource.
!termName            (class TermName           ): Specifies the terminal type name to be set in the TERM environment variable.
!title               (class Title              ): Specifies a string that may be used by the window manager when displaying this applic8ion.
!toolBar             (class ToolBar            ): Specifies whether or not the toolbar should be displayed. Default is “true”.
!ttyModes            (class TtyModes           ): Specifies a string containing terminal setting keywords and the characters to which they may be bound.
!  Allowable keywords include: brk, dsusp, eof, eol, eol2, erase, erase2, flush, intr, kill, lnext, quit, rprnt, start, status, stop, susp, swtch, && weras.
!  Control characters may be specified as ^char (e.g., ^c or ^u) and ^? may be used to indic8 delete (127). Use ^- to denote undef. Use \034 to represent ^\,
!    since a literal backslash in an X resource escapes the next character. This is very useful for overriding the default terminal settings without having to
!    do an stty every time an xterm is started. Note, however, that the stty program on a given host may use different keywords; xterm^s table is built-in.
!  If ttyModes resource specifies value for erase, that overrides ptyInitialErase setting, i.e., xterm initializes the terminal to match that value.
!useInsertMode       (class UseInsertMode      ): Force use of insert mode by adding approprE8 entries to TERMCAP env var. This is useful if system termcap is
!  broken. Default is “false”.
!utmpDisplayId       (class UtmpDisplayId      ): Whether xterm should try to record the display identifier (display number && screen number) as well as the
!  hostname in the system utmp log file. Default is “true”.
!utmpInhibit         (class UtmpInhibit        ): Whether xterm should try to record the user^s terminal in the system utmp log file. If true, xterm will not
!  try.    Default is “false”.
!waitForMap          (class WaitForMap         ): Whether xterm should w8 for initial window map before starting the subprocess. This is part of ptyHandshake
!  logic. When xterm is directed to w8 in this fashion, it passes the terminal size from the display end of the pseudo-terminal to the terminal I/O connection,
!  e.g., according to the window manager. Otherwise, it uses the size as given in resource values or command-line option -geom. Default is “false”.
!zIconBeep           (class ZIconBeep          ): Same as -ziconbeep command line argument. If value is non-zero, xterms that produce output while iconified
!  cause an XBell sound at given volume and have “*** ” prepended to their icon titles. Most window managers detect this change immeD8ly, showing you which
!  window has the output. (A similar feature was in x10 xterm.) Default is “false”.
!zIconTitleFormat    (class ZIconTitleFormat   ): Allow customiz8ion of string used in zIconBeep fE8ure. Default is “*** %s”. If value contains “%s”, then
!  xterm inserts icon title at that point rather than prepending the string to the icon title. (Only the first “%s” is used.)
!VT100 Widget Resources
!  The following resources are specified as part of the vt100 widget (class VT100). They are specified by patterns such as “XTerm.VT100.$rName”.
!  If your xterm is configured to support the “toolbar”, then those patterns need an extra level for the form-widget which holds the toolbar && VT100 widget.
!  A wildcard between the top-level “XTerm” && the “VT100” widget makes the resource settings work for either, e.g., “XTerm*VT100.$rName”.
!activeIcon          (class ActiveIcon         ):
!        Specifies whether or not active icon windows are to be used when the xterm window is iconified, if this feature is compiled into xterm.   The
!        active  icon is a miniature representation of the content of the window and will update as the content changes.  Not all window managers nec‐
!        essarily support application icon windows.  Some window managers will allow you to enter keystrokes into the active icon window.  The default
!        is “default”.
!        Xterm accepts either a keyword (ignoring case) or the number shown in parentheses:
!        false (0)
!               No active icon is shown.
!        true (1)
!               The active icon is shown.  If you are using twm, use this setting to enable active-icons.
!        default (2)
!                 xterm  checks  at  startup, and shows an active icon only for window managers which it can identify and which are known to support the
!                 feature.  These are fvwm (full support), and window maker (limited).  A few other windows managers (such  as  twm  and  ctwm)  support
!                 active icons, but do not support the extensions which allow xterm to identify the window manager.
!allowBoldFonts (class AllowBoldFonts)
!        When  set  to  “false”,  xterm  will  not use bold fonts.  This overrides both the alwaysBoldMode and the boldMode resources.  alwaysBoldMode
!        (class AlwaysBoldMode)
!allowC1Printable (class AllowC1Printable)
!        If true, overrides the mapping of C1 controls (codes 128-159) to make them be treated as if they were printable  characters.   Although  this
!        corresponds to no particular standard, some users insist it is a VT100.  The default is “false”.
!allowColorOps (class AllowColorOps)
!        Specifies  whether  control  sequences that set/query the dynamic colors should be allowed.  ANSI colors are unaffected by this resource set‐
!        ting.  The default is “true”.
!allowFontOps (class AllowFontOps)
!        Specifies whether control sequences that set/query the font should be allowed.  The default is “false”.
!allowPasteControls (class AllowPasteControls)
!     If true, allow control characters such as BEL and CAN to be pasted.  Formatting characters (tab, newline) are always allowed.  Other C0  control
!     characters  are suppressed unless this resource is enabled.  The exact set of control characters (C0 and C1) depends upon whether UTF-8 encoding
!     is used, as well as the allowC1Printable resource.  The default is “false”.
!allowScrollLock (class AllowScrollLock)
!        Specifies whether control sequences that set/query the Scroll Lock key should be allowed, as well as whether the Scroll Lock key responds  to
!        user^s keypress.  The default is “false”.
!        When  this  feature  is enabled, xterm will sense the state of the Scroll Lock key each time it acquires focus.  Pressing the Scroll Lock key
!        toggles xterm^s internal state, as well as toggling the associated LED.  While the Scroll Lock is active, xterm attempts to keep  a  viewport
!        on  the same set of lines.  If the current viewport is scrolled past the limit set by the saveLines resource, then Scroll Lock has no further
!        effect.
!        The reason for setting the default to “false” is to avoid user surprise.  This key is generally unused in keyboard  configurations,  and  has
!        not acquired a standard meaning even when it is used in that manner.  Consequently, users have assigned it for ad hoc purposes.
!allowSendEvents (class AllowSendEvents)
!        Specifies  whether  or  not  synthetic key and button events (generated using the X protocol SendEvent request) should be interpreted or dis‐
!        carded.  The default is “false” meaning they are discarded.  Note that allowing such events would create a very large security  hole,  there‐
!        fore enabling this resource forcefully disables the allowXXXOps resources.  The default is “false”.
!allowTcapOps (class AllowTcapOps)
!        Specifies  whether control sequences that query the terminal^s notion of its function-key strings, as termcap or terminfo capabilities should
!        be allowed.  The default is “true”.
!        A few programs, e.g., vim, use this feature to get an accurate description of the terminal^s capabilities, independent  of  the  termcap/ter‐
!        minfo setting:
!        ·   xterm  can tell the querying program how many colors it supports.  This is a constant, depending on how it is compiled, typically 16.  It
!            does not change if you alter resource settings, e.g., the boldColors resource.
!        ·   xterm can tell the querying program what strings are sent by modified (shift-, control-, alt-) function- and keypad-keys.  Reporting con‐
!            trol- and alt-modifiers is a feature that relies on the ncurses extended naming.
!allowTitleOps (class AllowTitleOps)
!        Specifies whether control sequences that modify the window title or icon name should be allowed.  The default is “true”.
!allowWindowOps (class AllowWindowOps)
!        Specifies  whether  extended  window  control sequences (as used in dtterm) should be allowed.  These include several control sequences which
!        manipulate the window size or position, as well as reporting these values and the title or icon name.  Each of  these  can  be  abused  in  a
!        script;  curiously  enough  most  terminal emulators that implement these restrict only a small part of the repertoire.  For fine-tuning, see
!        disallowedWindowOps.  The default is “false”.
!altIsNotMeta (class AltIsNotMeta)
!        If “true”, treat the Alt-key as if it were the Meta-key.  Your keyboard may happen to be configured so they are the same.  But  if  they  are
!        not, this allows you to use the same prefix- and shifting operations with the Alt-key as with the Meta-key.  See altSendsEscape and metaSend‐
!        sEscape.  The default is “false”.
!altSendsEscape (class AltSendsEscape)
!        This is an additional keyboard operation that may be processed after the logic for metaSendsEscape.  It is only available if the altIsNotMeta
!        resource is set.
!        ·   If “true”, Alt characters (a character combined with the modifier associated with left/right Alt-keys) are converted into a two-character
!            sequence with the character itself preceded by ESC.  This applies as well to function key control sequences, unless xterm sees  that  Alt
!            is used in your key translations.
!        ·   If  “false”, Alt characters input from the keyboard cause a shift to 8-bit characters (just like metaSendsEscape).  By combining the Alt-
!            and Meta-modifiers, you can create corresponding combinations of ESC-prefix and 8-bit characters.
!        The default is “False”.  Xterm provides a menu option for toggling this resource.
!alternateScroll (class ScrollCond)
!        If “true”, the scroll-back and scroll-forw actions send cursor-up and -down keys when xterm is displaying the alternate screen.  The  default
!        is “false”.
!        The alternateScroll state can also be set using a control sequence.
!alwaysBoldMode (class AlwaysBoldMode)
!        Specifies  whether  xterm should check if the normal and bold fonts are distinct before deciding whether to use overstriking to simulate bold
!        fonts.  If this resource is true, xterm does not make the check for distinct fonts when deciding how to handle the  boldMode  resource.   The
!        default is “false”.
!        boldMode   alwaysBoldMode   Comparison   Action
!        ────────────────────────────────────────────────────
!        false      false            ignored      use font
!        false      true             ignored      use font
!        true       false            same         overstrike
!        true       false            different    use font
!        true       true             ignored      overstrike
!        This resource is used only for bitmap fonts:
!        ·   When  using  bitmap  fonts, it is possible that the font server will approximate the bold font by rescaling it from a different font size
!            than expected.  The alwaysBoldMode resource allows the user to override the (sometimes poor) resulting bold font with overstriking (which
!            is at least consistent).
!        ·   The problem does not occur with TrueType fonts (though there can be other unnecessary issues such as different coverage of the normal and
!            bold fonts).
!        As an alternative, setting the allowBoldFonts resource to false overrides both the alwaysBoldMode and the boldMode resources.
!alwaysHighlight (class AlwaysHighlight)
!        Specifies whether or not xterm should always display a highlighted text cursor.  By default (if this resource is false), a hollow text cursor
!        is displayed whenever the pointer moves out of the window or the window loses the input focus.  The default is “false”.
!alwaysUseMods (class AlwaysUseMods)
!        Override  the  numLock  resource,  telling xterm to use the Alt and Meta modifiers to construct parameters for function key sequences even if
!        those modifiers appear in the translations resource.  Normally xterm checks if Alt or Meta is used in a translation that would conflict  with
!        function key modifiers, and will ignore these modifiers in that special case.  The default is “false”.
!answerbackString (class AnswerbackString)
!        Specifies the string that xterm sends in response to an ENQ (control/E) character from the host.  The default is a blank string, i.e., “”.  A
!        hardware VT100 implements this feature as a setup option.
!appcursorDefault (class AppcursorDefault)
!        If “true”, the cursor keys are initially in application mode.  This is the same as the VT102 private DECCKM mode, The default is “false”.
!appkeypadDefault (class AppkeypadDefault)
!        If “true”, the keypad keys are initially in application mode.  The default is “false”.
!assumeAllChars (class AssumeAllChars)
!        If “true”, this enables a special case in bitmap fonts to allow the font server to choose how to display  missing  glyphs.   The  default  is
!        “false”.
!autoWrap (class AutoWrap)
!        Specifies whether or not auto-wraparound should be enabled.  This is the same as the VT102 DECAWM.  The default is “true”.
!awaitInput (class AwaitInput)
!        Specifies whether or not the xterm uses a 50 millisecond timeout to await input (i.e., to support the Xaw3d arrow scrollbar).  The default is
!        “false”.
!backarrowKey (class BackarrowKey)
!        Specifies whether the backarrow key transmits a backspace (8) or delete (127) character.  This corresponds to the DECBKM control sequence.  A
!        “true” value specifies backspace.  The default is “True”.  Pressing the control key toggles this behavior.
!background (class Background)
!        Specifies the color to use for the background of the window.  The default is “XtDefaultBackground”.
!bellIsUrgent (class BellIsUrgent)
!        Specifies whether to set the Urgency hint for the window manager when making a bell sound.  The default is “false”.
!bellOnReset (class BellOnReset)
!        Specifies whether to sound a bell when doing a hard reset.  The default is “true”.
!bellSuppressTime (class BellSuppressTime)
!        Number  of  milliseconds  after  a  bell command is sent during which additional bells will be suppressed.  Default is 200.  If set non-zero,
!        additional bells will also be suppressed until the server reports that processing of the first bell has been completed; this feature is  most
!        useful with the visible bell.
!boldColors (class ColorMode)
!        Specifies whether to combine bold attribute with colors like the IBM PC, i.e., map colors 0 through 7 to colors 8 through 15.  These normally
!        are the brighter versions of the first 8 colors, hence bold.  The default is “true”.
!boldFont (class BoldFont)
!        Specifies the name of the bold font to use instead of overstriking.  There is no default for this resource.
!        This font must be the same height and width as the normal font, otherwise it is ignored.  If only one of the normal or bold fonts  is  speci‐
!        fied, it will be used as the normal font and the bold font will be produced by overstriking this font.
!        See also the discussion of boldMode and alwaysBoldMode resources.
!boldMode (class BoldMode)
!        This  specifies whether or not text with the bold attribute should be overstruck to simulate bold fonts if the resolved bold font is the same
!        as the normal font.  It may be desirable to disable bold fonts when color is being used for the bold attribute.
!        Note that xterm has one bold font which you may set explicitly.  Xterm attempts to derive a bold font for the other  font  selections  (font1
!        through  font6).   If  it  cannot  find a bold font, it will use the normal font.  In each case (whether the explicit resource or the derived
!        font), if the normal and bold fonts are distinct, this resource has no effect.  The default is “true”.
!        See the alwaysBoldMode resource which can modify the behavior of this resource.
!        Although xterm attempts to derive a bold font for other font selections, the font server may not cooperate.  Since X11R6, bitmap  fonts  have
!        been scaled.  The font server claims to provide the bold font that xterm requests, but the result is not always readable.  XFree86 introduced
!        a feature which can be used to suppress the scaling.   In  the  X  server^s  configuration  file  (e.g.,  “/etc/X11/XFree86”),  you  can  add
!        “:unscaled” to the end of the directory specification for the “misc” fonts, which comprise the fixed-pitch fonts that are used by xterm.  For
!        example
!            FontPath                 "/usr/lib/X11/fonts/misc/"
!        would become
!            FontPath                 "/usr/lib/X11/fonts/misc/:unscaled"
!        Depending on your configuration, the font server may have its own configuration file.  The same “:unscaled” can be added to its configuration
!        file at the end of the directory specification for “misc”.
!        The bitmap scaling feature is also used by xterm to implement VT102 double-width and double-height characters.
!brokenLinuxOSC (class BrokenLinuxOSC)
!        If  true,  xterm  applies  a  workaround  to  ignore malformed control sequences that a Linux script might send.  Compare the palette control
!        sequences documented in console_codes with ECMA-48.  The default is “true”.
!brokenSelections (class BrokenSelections)
!        If true, xterm in 8-bit mode will interpret STRING selections as carrying text in the current locale^s encoding.  Normally STRING  selections
!        carry ISO-8859-1 encoded text.  Setting this resource to “true” violates the ICCCM; it may, however, be useful for interacting with some bro‐
!        ken X clients.  The default is “false”.
!brokenStringTerm (class BrokenStringTerm)
!        provides a work-around for some ISDN routers which start an application control string without completing it.  Set this to  “true”  if  xterm
!        appears to freeze when connecting.  The default is “false”.
!        Xterm^s state parser recognizes several types of control strings which can contain text, e.g.,
!        APC (Application Program Command),
!        DCS (Device Control String),
!        OSC (Operating System Command),
!        PM (Privacy Message), and
!        SOS (Start of String),
!        Each  should  end  with  a  string-terminator  (a special character which cannot appear in these strings).  Ordinary control characters found
!        within the string are not ignored; they are processed without interfering with the process of  accumulating  the  control  string^s  content.
!        Xterm recognizes these controls in all modes, although some of the functions may be suppressed after parsing the control.
!        When  enabled,  this  feature  allows  the user to exit from an unterminated control string when any of these ordinary control characters are
!        found:
!        control/D (used as an end of file in many shells),
!        control/H (backspace),
!        control/I (tab-feed),
!        control/J (line feed aka newline),
!        control/K (vertical tab),
!        control/L (form feed),
!        control/M (carriage return),
!        control/N (shift-out),
!        control/O (shift-in),
!        control/Q (XOFF),
!        control/X (cancel)
!c132 (class C132)
!        Specifies whether or not the VT102 DECCOLM escape sequence, used to switch between 80 and 132 columns, should be  honored.   The  default  is
!        “false”.
!cacheDoublesize (class CacheDoublesize)
!        Tells whether to cache double-sized fonts by xterm.  Set this to zero to disable double-sized fonts altogether.
!cdXtraScroll (class CdXtraScroll)
!        Specifies  whether xterm should scroll to a new page when clearing the whole screen.  Like tiXtraScroll, the intent of this option is to pro‐
!        vide a picture of the full-screen application^s display on the scrollback before wiping out the text.   The  default  for  this  resource  is
!        “false”.
!charClass (class CharClass)
!        Specifies  comma-separated lists of character class bindings of the form [low-]high:value.  These are used in determining which sets of char‐
!        acters should be treated the same when doing cut and paste.  See the CHARACTER CLASSES section.
!cjkWidth (class CjkWidth)
!        Specifies whether xterm should follow the traditional East Asian width convention.  When turned on, characters with East Asian Ambiguous  (A)
!        category  in  UTR 11 have a column width of 2.  You may have to set this option to “true” if you have some old East Asian terminal based pro‐
!        grams that assume that line-drawing characters have a column width of 2.  If this resource is false, the mkWidth resource controls the choice
!        between the system^s wcwidth and xterm^s built-in tables.  The default is “false”.
!color0 (class Color0)
!color1 (class Color1)
!color2 (class Color2)
!color3 (class Color3)
!color4 (class Color4)
!color5 (class Color5)
!color6 (class Color6)
!color7 (class Color7)
!        These specify the colors for the ISO-6429 extension.  The defaults are, respectively, black, red3, green3, yellow3, a customizable dark blue,
!        magenta3, cyan3, and gray90.  The default shades of color are chosen to allow the colors 8-15 to be used as brighter versions.
!color8 (class Color8)
!color9 (class Color9)
!color10 (class Color10)
!color11 (class Color11)
!color12 (class Color12)
!color13 (class Color13)
!color14 (class Color14)
!color15 (class Color15)
!        These specify the colors for the ISO-6429 extension if the bold attribute is also enabled.  The default  resource  values  are  respectively,
!        gray30, red, green, yellow, a customizable light blue, magenta, cyan, and white.
!color16 (class Color16)
!through
!color255 (class Color255)
!        These  specify the colors for the 256-color extension.  The default resource values are for colors 16 through 231 to make a 6x6x6 color cube,
!        and colors 232 through 255 to make a grayscale ramp.
!        Resources past color15 are available as a compile-time option.  Due to a hardcoded limit in the X libraries on the total number of  resources
!        (to  400),  the resources for 256-colors are omitted when wide-character support and luit are enabled.  Besides inconsistent behavior if only
!        part of the resources were allowed, determining the exact cutoff is difficult, and the X libraries tend to crash if the number  of  resources
!        exceeds the limit.  The color palette is still initialized to the same default values, and can be modified via control sequences.
!        On the other hand, the resource limit does permit including the entire range for 88-colors.
!colorAttrMode (class ColorAttrMode)
!        Specifies  whether  colorBD, colorBL, colorRV, and colorUL should override ANSI colors.  If not, these are displayed only when no ANSI colors
!        have been set for the corresponding position.  The default is “false”.
!colorBD (class ColorBD)
!        This specifies the color to use to display bold characters if the “colorBDMode” resource is enabled.  The default is “XtDefaultForeground”.
!        See also the veryBoldColors resource which allows combining bold and color.
!colorBDMode (class ColorAttrMode)
!        Specifies whether characters with the bold attribute should be displayed in color or as bold characters.  Note  that  setting  colorMode  off
!        disables all colors, including bold.  The default is “false”.
!colorBL (class ColorBL)
!        This specifies the color to use to display blink characters if the “colorBLMode” resource is enabled.  The default is “XtDefaultForeground”.
!        See also the veryBoldColors resource which allows combining underline and color.
!colorBLMode (class ColorAttrMode)
!        Specifies  whether  characters  with  the blink attribute should be displayed in color.  Note that setting colorMode off disables all colors,
!        including this.  The default is “false”.
!colorMode (class ColorMode)
!        Specifies whether or not recognition of ANSI (ISO-6429) color change escape sequences should be enabled.  The default is “true”.
!colorRV (class ColorRV)
!        This specifies the color to use to display reverse characters if the “colorRVMode” resource  is  enabled.   The  default  is  “XtDefaultFore‐
!        ground”.
!        See also the veryBoldColors resource which allows combining reverse and color.
!colorRVMode (class ColorAttrMode)
!        Specifies  whether  characters with the reverse attribute should be displayed in color.  Note that setting colorMode off disables all colors,
!        including this.  The default is “false”.
!colorUL (class ColorUL)
!        This specifies the color to use to display underlined characters if the “colorULMode” resource is enabled.  The  default  is  “XtDefaultFore‐
!        ground”.
!        See also the veryBoldColors resource which allows combining underline and color.
!colorULMode (class ColorAttrMode)
!        Specifies whether characters with the underline attribute should be displayed in color or as underlined characters.  Note that setting color‐
!        Mode off disables all colors, including underlining.  The default is “false”.
!combiningChars (class CombiningChars)
!        Specifies the number of wide-characters which can be stored in a cell to overstrike (combine) with the base character of the cell.  This  can
!        be set to values in the range 0 to 4.  The default is “2”.
!ctrlFKeys (class CtrlFKeys)
!        In  VT220  keyboard  mode  (see  sunKeyboard  resource), specifies the amount by which to shift F1-F12 given a control modifier (CTRL).  This
!        allows you to generate key symbols for F10-F20 on a Sun/PC keyboard.  The default is “10”, which means that CTRL F1 generates the key  symbol
!        for F11.
!curses (class Curses)
!        Specifies whether or not the last column bug in more(1) should be worked around.  See the -cu option for details.  The default is “false”.
!cursorBlink (class CursorBlink)
!        Specifies whether to make the cursor blink.  The default is “false”.
!        Xterm  uses  two variables to determine whether the cursor blinks.  One is set by this resource.  The other is set by control sequences (pri‐
!        vate mode 12 and DECSCUSR).  Xterm tests the XOR of the two variables.
!cursorColor (class CursorColor)
!        Specifies the color to use for the text cursor.  The default is “XtDefaultForeground”.  By default, xterm attempts to keep  this  color  from
!        being  the same as the background color, since it draws the cursor by filling the background of a text cell.  The same restriction applies to
!        control sequences which may change this color.
!        Setting this resource overrides most of xterm^s adjustments to cursor color.  It will still use reverse-video to disallow some cases, such as
!        a black cursor on a black background.
!cursorOffTime (class CursorOffTime)
!        Specifies  the  duration  of  the  “off” part of the cursor blink cycle-time in milliseconds.  The same timer is used for text blinking.  The
!        default is “300”.
!cursorOnTime (class CursorOnTime)
!        Specifies the duration of the “on” part of the cursor blink cycle-time, in milliseconds.  The same timer is  used  for  text  blinking.   The
!        default is “600”.
!cutNewline (class CutNewline)
!        If  “false”,  triple clicking to select a line does not include the Newline at the end of the line.  If “true”, the Newline is selected.  The
!        default is “true”.
!cursorUnderLine (class CursorUnderLine)
!        Specifies whether to make the cursor underlined or a box.  The default is “false”.
!cutToBeginningOfLine (class CutToBeginningOfLine)
!        If “false”, triple clicking to select a line selects only from the current word forward.  If  “true”,  the  entire  line  is  selected.   The
!        default is “true”.
!decTerminalID (class DecTerminalID)
!        Specifies  the  emulation  level (100=VT100, 220=VT220, etc.), used to determine the type of response to a DA control sequence.  Leading non-
!        digit characters are ignored, e.g., “vt100” and “100” are the same.  The default is “420”.
!defaultString (class DefaultString)
!        Specify the character (or string) which xterm will substitute when pasted text includes a character which cannot be represented in  the  cur‐
!        rent  encoding.   For  instance,  pasting  UTF-8 text into a display of ISO-8859-1 characters will only be able to display codes 0-255, while
!        UTF-8 text can include Unicode values above 255.  The default is “#” (a single pound sign).
!        If the undisplayable text would be double-width, xterm will add a space after the “#” character, to give  roughly  the  same  layout  on  the
!        screen as the original text.
!deleteIsDEL (class DeleteIsDEL)
!        Specifies  whether  the  Delete  key  on the editing keypad should send DEL (127) or the VT220-style Remove escape sequence.  A “false” value
!        enables the latter.  The default is “Maybe”.
!disallowedColorOps (class DisallowedColorOps)
!        Specify which features will be disabled if allowColorOps is false.  This is a comma-separated list of names.  The default value is
!        SetColor,GetColor,GetAnsiColor
!        The names are listed below.  xterm ignores capitalization, but they are shown in mixed-case for clarity.
!        SetColor
!             Set a specific dynamic color.
!        GetColor
!             Report the current setting of a given dynamic color.
!        GetAnsiColor
!             Report the current setting of a given ANSI color (actually any of the colors set via ANSI-style controls).
!disallowedFontOps (class DisallowedFontOps)
!        Specify which features will be disabled if allowFontOps is false.  This is a comma-separated list of names.  The default value is
!        SetFont,GetFont
!        The names are listed below.  xterm ignores capitalization, but they are shown in mixed-case for clarity.
!        SetFont
!             Set the specified font.
!        GetFont
!             Report the specified font.
!disallowedTcapOps (class DisallowedTcapOps)
!        Specify which features will be disabled if allowTcapOps is false.  This is a comma-separated list of names.  The default value is
!        SetTcap,GetTcap
!        The names are listed below.  xterm ignores capitalization, but they are shown in mixed-case for clarity.
!       SetTcap
!             (not implemented)
!        GetTcap
!             Report specified function- and other special keys.
!disallowedWindowOps (class DisallowedWindowOps)
!        Specify which features will be disabled if allowWindowOps is false.  This is a comma-separated list of names, or (for  the  controls  adapted
!        from dtterm the operation number).  The default value is
!        1,2,3,4,5,6,7,8,9,11,13,14,18,19,20,21,GetSelection,SetSelection,SetWinLines,SetXprop
!(i.e. no operations are allowed).
!        The  names  are  listed below.  xterm ignores capitalization, but they are shown in mixed-case for clarity.  Where a number can be used as an
!        alternative, it is given in parentheses after the name.
!        GetIconTitle (20)
!             Report xterm window^s icon label as a string.
!        GetScreenSizeChars (19)
!             Report the size of the screen in characters as numbers.
!        GetSelection
!             Report selection data as a base64 string.
!        GetWinPosition (13)
!             Report xterm window position as numbers.
!        GetWinSizeChars (18)
!             Report the size of the text area in characters as numbers.
!        GetWinSizePixels (14)
!             Report xterm window in pixels as numbers.
!        GetWinState (11)
!             Report xterm window state as a number.
!        GetWinTitle (21)
!             Report xterm window^s title as a string.
!        LowerWin (6)
!             Lower the xterm window to the bottom of the stacking order.
!        MaximizeWin (9)
!             Maximize window (i.e., resize to screen size).
!        FullscreenWin (10)
!             Use full screen (i.e., resize to screen size, without window decorations).
!        MinimizeWin (2)
!             Iconify window.
!        PopTitle (23)
!             Pop title from internal stack.
!        PushTitle (22)
!             Push title to internal stack.
!        RaiseWin (5)
!             Raise the xterm window to the front of the stacking order.
!        RefreshWin (7)
!             Refresh the xterm window.
!        RestoreWin (1)
!             De-iconify window.
!        SetSelection
!             Set selection data.
!        SetWinLines
!             Resize to a given number of lines, at least 24.
!        SetWinPosition (3)
!             Move window to given coordinates.
!        SetWinSizeChars (8)
!             Resize the text area to given size in characters.
!        SetWinSizePixels (4)
!             Resize the xterm window to given size in pixels.
!        SetXprop
!             Set X property on top-level window.
!dynamicColors (class DynamicColors)
!        Specifies whether or not escape sequences to change colors assigned to different attributes are recognized.
!eightBitControl (class EightBitControl)
!        Specifies whether or not control sequences sent by the terminal should be eight-bit characters or escape sequences.  The default is “false”.
!eightBitInput (class EightBitInput)
!        If “true”, Meta characters (a single-byte character combined with the Meta modifier key) input from the keyboard are presented  as  a  single
!        character, modified according to the eightBitMeta resource.  If “false”, Meta characters are converted into a two-character sequence with the
!        character itself preceded by ESC.  The default is “true”.
!        The metaSendsEscape and altSendsEscape resources may override this feature.  Generally keyboards do not have a key labeled “Meta”, but  “Alt”
!        keys  are  common, and they are conventionally used for “Meta”.  If they were synonymous, it would have been reasonable to name this resource
!        “altSendsEscape”, reversing its sense.  For more background on this, see the meta function in curses.
!        Note that the Alt key is not necessarily the same as the Meta modifier.  xmodmap lists your key modifiers.  X defines  modifiers  for  shift,
!        (caps)  lock  and  control,  as  well as 5 additional modifiers which are generally used to configure key modifiers.  xterm inspects the same
!        information to find the modifier associated with either Meta key (left or right), and uses that key as the Meta modifier.  It also looks  for
!        the NumLock key, to recognize the modifier which is associated with that.
!        If  your  xmodmap  configuration  uses the same keycodes for Alt- and Meta-keys, xterm will only see the Alt-key definitions, since those are
!        tested before Meta-keys.  NumLock is tested first.  It is important to keep these keys distinct; otherwise some of xterm^s  functionality  is
!        not available.
!        The  eightBitInput  resource  is  tested  at  startup  time.  If “true”, the xterm tries to put the terminal into 8-bit mode.  If “false”, on
!        startup, xterm tries to put the terminal into 7-bit mode.  For some configurations this is unsuccessful; failure is ignored.  After  startup,
!        xterm does not change the terminal between 8-bit and 7-bit mode.
!        As  originally  implemented  in  X11,  the  resource value did not change after startup.  However (since patch #216 in 2006) xterm can modify
!        eightBitInput after startup via a control sequence.  The corresponding terminfo capabilities smm (set meta mode) and rmm  (reset  meta  mode)
!        have  been recognized by bash for some time.  Interestingly enough, bash^s notion of "meta mode" differs from the standard definition (in the
!        terminfo manual), which describes the change to the eighth bit of a character.  It happens that bash views "meta mode" as the  ESC  character
!        that  xterm puts before a character when a special meta key is pressed.  bash^s early documentation talks about the ESC character and ignores
!        the eighth bit.
!eightBitMeta (class EightBitMeta)
!        This controls the way xterm modifies the eighth bit of a single-byte key when the eightBitInput resource is set.  The default is “locale”.
!        The resource value is a string, evaluated as a boolean after startup.
!        false
!             The key is sent unmodified.
!        locale
!             The key is modified only if the locale uses eight-bit encoding.
!        true The key is sent modified.
!        never
!             The key is always sent unmodified.
!        Except for the never choice, xterm honors the terminfo capabilities smm (set meta mode) and rmm (reset meta mode), allowing the feature to be
!        turned on or off dynamically.
!        If eightBitMeta is enabled when the locale uses UTF-8, xterm encodes the value as UTF-8 (since patch #183 in 2003).
!eightBitOutput (class EightBitOutput)
!        Specifies  whether  or not eight-bit characters sent from the host should be accepted as is or stripped when printed.  The default is “true”,
!        which means that they are accepted as is.
!eightBitSelectTypes (class EightBitSelectTypes)
!        Override xterm^s default selection target list (see SELECT/PASTE) for selections in normal  (ISO-8859-1)  mode.   The  default  is  an  empty
!        string, i.e., “”, which does not override anything.
!faceName (class FaceName)
!        Specify  the  pattern for scalable fonts selected from the FreeType library if support for that library was compiled into xterm.  There is no
!        default value.
!        If not specified, or if there is no match for both normal and bold fonts, xterm uses the bitmap font and related resources.
!        It is possible to select suitable bitmap fonts using a script such as this:
!            #!/bin/sh
!            FONT=`xfontsel -print`
!            test -n "$FONT" && xfd -fn "$FONT"
!        However (even though xfd accepts a “-fa” option to denote FreeType fonts), xfontsel has not been similarly extended.  As  a  workaround,  you
!        may try
!            fc-list :scalable=true:spacing=mono: family
!        to find a list of scalable fixed-pitch fonts which may be used for the faceName resource value.
!faceNameDoublesize (class FaceNameDoublesize)
!        Specify a double-width scalable font for cases where an application requires this, e.g., in CJK applications.  There is no default value.
!        If the application uses double-wide characters and this resource is not given, xterm will use a scaled version of the font given by faceName.
!faceSize (class FaceSize)
!        Specify  the  pointsize  for  fonts  selected  from the FreeType library if support for that library was compiled into xterm.  The default is
!        “14.0” On the VT Fonts menu, this corresponds to the Default entry.
!        Although the default is “14.0”, this may not be the same as the pointsize for the default bitmap font,  i.e.,  that  assigned  with  the  -fn
!        option,  or the font resource.  For example, the “fixed” font usually has a pointsize of “8.0”.  If you set faceSize to match the size of the
!        bitmap font, then switching between bitmap and TrueType fonts via the font menu will give comparable sizes for the window.
!        You can specify the pointsize for TrueType fonts selected with the other size-related menu entries such as Medium, Huge, etc., by  using  one
!        of  the  following  resource values.  If you do not specify a value, they default to “0.0”, which causes xterm to use the ratio of font sizes
!        from the corresponding bitmap font resources to obtain a TrueType pointsize.
!        If all of the faceSize resources are set, then xterm will use this information to determine the next smaller/larger  TrueType  font  for  the
!        larger-vt-font() and smaller-vt-font() actions.  If any are not set, xterm will use only the areas of the bitmap fonts.
!faceSize1 (class FaceSize1)
!        Specifies the pointsize of the first alternative font.
!faceSize2 (class FaceSize2)
!        Specifies the pointsize of the second alternative font.
!faceSize3 (class FaceSize3)
!        Specifies the pointsize of the third alternative font.
!faceSize4 (class FaceSize4)
!        Specifies the pointsize of the fourth alternative font.
!faceSize5 (class FaceSize5)
!        Specifies the pointsize of the fifth alternative font.
!faceSize6 (class FaceSize6)
!        Specifies the pointsize of the sixth alternative font.
!font (class Font)
!        Specifies the name of the normal font.  The default is “fixed”.
!        See the discussion of the locale resource, which describes how this font may be overridden.
!        NOTE: some resource files use patterns such as
!            *font: fixed                 ! which are overly broad, affecting both
!            XTerm.VT100.font        &&
!            XTerm.VT100.Utf8Fonts.font   ! which is probably not what you intended.
!fastScroll (class FastScroll)
!        Modifies the effect of jump scroll (jumpScroll) by suppressing screen refreshes for the special case when output to the screen has completely
!        shifted the contents off-screen.  For instance, cat^ing a large file to the screen does this.
!font1 (class Font1)
!        Specifies the name of the first alternative font, corresponding to “Unreadable” in the standard menu.
!font2 (class Font2)
!        Specifies the name of the second alternative font, corresponding to “Tiny” in the standard menu.
!font3 (class Font3)
!        Specifies the name of the third alternative font, corresponding to “Small” in the standard menu.
!font4 (class Font4)
!        Specifies the name of the fourth alternative font, corresponding to “Medium” in the standard menu.
!font5 (class Font5)
!        Specifies the name of the fifth alternative font, corresponding to “Large” in the standard menu.
!font6 (class Font6)
!        Specifies the name of the sixth alternative font, corresponding to “Huge” in the standard menu.
!fontDoublesize (class FontDoublesize)
!        Specifies whether xterm should attempt to use font scaling to draw double-sized characters.  Some older font servers cannot do this properly,
!        will  return  misleading  font  metrics.   The default is “true”.  If disabled, xterm will simulate double-sized characters by drawing normal
!        characters with spaces between them.
!fontWarnings (class FontWarnings)
!        Specify whether xterm should report an error if it fails to load a font:
!        0    Never report an error (though the X libraries may).
!        1    Report an error if the font name was given as a resource setting.
!        2    Always report an error on failure to load a font.
!        The default is “1”.
!forceBoxChars (class ForceBoxChars)
!        Specifies whether xterm should assume the normal and bold fonts have VT100 line-drawing characters:
!        ·   The fixed-pitch ISO-8859-*-encoded fonts used by xterm normally have the VT100 line-drawing glyphs  in  cells  1-31.   Other  fixed-pitch
!            fonts may be more attractive, but lack these glyphs.
!        ·   When  using  an  ISO-10646-1  font  and  the wideChars resource is true, xterm uses the Unicode glyphs which match the VT100 line-drawing
!            glyphs.
!        If “false”, xterm checks for missing glyphs in the font and makes line-drawing characters directly as needed.  If “true”, xterm  assumes  the
!        font does not contain the line-drawing characters, and draws them directly.  The default is “false”.
!forcePackedFont (class ForcePackedFont)
!        Specifies  whether  xterm  should  use the maximum or minimum glyph width when displaying using a bitmap font.  Use the maximum width to help
!        with proportional fonts.  The default is “true”, denoting the minimum width.
!foreground (class Foreground)
!        Specifies the color to use for displaying text in the window.  Setting the class name instead of the instance name is an  easy  way  to  have
!        everything that would normally appear in the text color change color.  The default is “XtDefaultForeground”.
!formatOtherKeys (class FormatOtherKeys)
!        Overrides the format of the escape sequence used to report modified keys with the modifyOtherKeys resource.
!        0  send modified keys as parameters for function-key 27 (default).
!        1  send modified keys as parameters for CSI u.
!freeBoldBox (class FreeBoldBox)
!        Specifies  whether xterm should assume the bounding boxes for normal and bold fonts are compatible.  If “false”, xterm compares them and will
!        reject choices of bold fonts that do not match the size of the normal font.  The default is “false”, which means that the comparison is  per‐
!        formed.
!geometry (class Geometry)
!        Specifies the preferred size and position of the VT102 window.  There is no default for this resource.
!highlightColor (class HighlightColor)
!        Specifies  the  color  to  use  for the background of selected (highlighted) text.  If not specified (i.e., matching the default foreground),
!        reverse video is used.  The default is “XtDefaultForeground”.
!highlightColorMode (class HighlightColorMode)
!        Specifies whether xterm should use highlightTextColor and highlightColor to override the reversed foreground/background colors  in  a  selec‐
!        tion.   The  default  is  unspecified: at startup, xterm checks if those resources are set to something other than the default foreground and
!        background colors.  Setting this resource disables the check.
!        The following table shows the interaction of the highlighting resources, abbreviated as shown to fit in this page:
!        HCM
!           highlightColorMode
!        HR highlightReverse
!        HBG
!           highlightColor
!        HFG
!           highlightTextColor
!        HCM       HR      HBG       HFG       Highlight
!        ──────────────────────────────────────────────────────
!        false     false   default   default   bg/fg
!        false     false   default   set       bg/fg
!        false     false   set       default   fg/HBG
!        false     false   set       set       fg/HBG
!        ──────────────────────────────────────────────────────
!        false     true    default   default   bg/fg
!        false     true    default   set       bg/fg
!        false     true    set       default   fg/HBG
!        false     true    set       set       fg/HBG
!        ──────────────────────────────────────────────────────
!        true      false   default   default   bg/fg
!        true      false   default   set       HFG/fg
!        true      false   set       default   bg/HBG
!        true      false   set       set       HFG/HBG
!        ──────────────────────────────────────────────────────
!        true      true    default   default   fg/fg (useless)
!        true      true    default   set       HFG/fg
!        true      true    set       default   fg/HBG
!        true      true    set       set       HFG/HBG
!        ──────────────────────────────────────────────────────
!        default   false   default   default   bg/fg
!        default   false   default   set       bg/fg
!        default   false   set       default   fg/HBG
!        default   false   set       set       HFG/HBG
!        ──────────────────────────────────────────────────────
!        default   true    default   default   bg/fg
!        default   true    default   set       bg/fg
!        default   true    set       default   fg/HBG
!        default   true    set       set       HFG/HBG
!        ──────────────────────────────────────────────────────
!highlightReverse (class HighlightReverse)
!        Specifies whether xterm should reverse the selection foreground and background colors when selecting text with reverse-video attribute.  This
!        applies  only to the highlightColor and highlightTextColor resources, e.g., to match the color scheme of xwsh.  If “true”, xterm reverses the
!        colors, If “false”, xterm does not reverse colors, The default is “true”.
!highlightSelection (class HighlightSelection)
!        If “false”, selecting with the mouse highlights all positions on the screen between the beginning of the selection and the current  position.
!        If “true”, xterm highlights only the positions that contain text that can be selected.  The default is “false”.
!        Depending  on the way your applications write to the screen, there may be trailing blanks on a line.  Xterm stores data as it is shown on the
!        screen.  Erasing the display changes the internal state of each cell so it is not considered a blank for the purpose  of  selection.   Blanks
!        written since the last erase are selectable.  If you do not wish to have trailing blanks in a selection, use the trimSelection resource.
!highlightTextColor (class HighlightTextColor)
!        Specifies  the  color  to  use  for the foreground of selected (highlighted) text.  If not specified (i.e., matching the default background),
!        reverse video is used.  The default is “XtDefaultBackground”.
!hpLowerleftBugCompat (class HpLowerleftBugCompat)
!        Specifies whether to work around a bug in HP^s xdb, which ignores termcap and always sends ESC F to move to the lower  left  corner.   “true”
!        causes xterm to interpret ESC F as a request to move to the lower left corner of the screen.  The default is “false”.
!i18nSelections (class I18nSelections)
!        If  false,  xterm  will not request the targets COMPOUND_TEXT or TEXT.  The default is “true”. It may be set to false in order to work around
!        ICCCM violations by other X clients.
!iconBorderColor (class BorderColor)
!        Specifies the border color for the active icon window if this feature is compiled into xterm.  Not all window managers  will  make  the  icon
!        border visible.
!iconBorderWidth (class BorderWidth)
!        Specifies  the  border width for the active icon window if this feature is compiled into xterm.  The default is “2”.  Not all window managers
!        will make the border visible.
!iconFont (class IconFont)
!        Specifies the font for the miniature active icon window, if this feature is compiled into xterm.  The default is “nil2”.
!initialFont (class InitialFont)
!        Specifies which of the VT100 fonts to use initially.  Values are the same  as  for  the  set-vt-font  action.   The  default  is  “d”,  i.e.,
!        “default”.
!inputMethod (class XtCInputMethod)
!        Tells xterm which type of input method to use.  There is no default method.
!internalBorder (class BorderWidth)
!        Specifies the number of pixels between the characters and the window border.  The default is “2”.
!italicULMode (class ColorAttrMode)
!        Specifies  whether  characters  with the underline attribute should be displayed in an italic font or as underlined characters.  It is imple‐
!        mented only for TrueType fonts.
!jumpScroll (class JumpScroll)
!        Specifies whether or not jump scroll should be used.  This corresponds to the VT102 DECSCLM  private  mode.   The  default  is  “true”.   See
!        fastScroll for a variation.
!keepSelection (class KeepSelection)
!        Specifies  whether  xterm  will  keep  the selection even after the selected area was touched by some output to the terminal.  The default is
!        “true”.
!keyboardDialect (class KeyboardDialect)
!        Specifies the initial keyboard dialect, as well as the default value when the terminal is reset.  The value given is the same  as  the  final
!        character in the control sequences which change character sets.  The default is “B”, which corresponds to US ASCII.
!nameKeymap (class NameKeymap)
!        See the discussion of the keymap() action.
!limitResize (class LimitResize)
!        Limits resizing of the screen via control sequence to a given multiple of the display dimensions.  The default is “1”.
!locale (class Locale)
!        Specifies how to use luit, an encoding converter between UTF-8 and locale encodings.  The resource value (ignoring case) may be:
!        true
!            xterm will use the encoding specified by the users^ LC_CTYPE locale (i.e., LC_ALL, LC_CTYPE, or LANG variables) as far as possible.  This
!            is realized by always enabling UTF-8 mode and invoking luit in non-UTF-8 locales.
!        medium
!            xterm will follow users^ LC_CTYPE locale only for UTF-8, east Asian, and Thai locales, where the encodings were not supported by  conven‐
!            tional 8bit mode with changing fonts.  For other locales, xterm will use conventional 8bit mode.
!        checkfont
!            If  mini-luit  is compiled-in, xterm will check if a Unicode font has been specified.  If so, it checks if the character encoding for the
!            current locale is POSIX, Latin-1 or Latin-9, uses the appropriate mapping to support those with the Unicode font.  For  other  encodings,
!            xterm assumes that UTF-8 encoding is required.
!        false
!            xterm will use conventional 8bit mode or UTF-8 mode according to utf8 resource or -u8 option.
!        Any  other  value, e.g., “UTF-8” or “ISO8859-2”, is assumed to be an encoding name; luit will be invoked to support the encoding.  The actual
!        list of supported encodings depends on luit.  The default is “medium”.
!        Regardless of your locale and encoding, you need an ISO-10646-1 font to display the result.  Your configuration may not include this font, or
!        locale-support  by  xterm may not be needed.  At startup, xterm uses a mechanism equivalent to the load-vt-fonts(utf8Fonts, Utf8Fonts) action
!        to load font name subresources of the VT100 widget.  That is, resource patterns such as “*VT100.Utf8Fonts.font” will be loaded, and (if  this
!        resource  is enabled), override the normal fonts.  If no subresources are found, the normal fonts such as “*VT100.font”, etc., are used.  The
!        resource files distributed with xterm use ISO-10646-1 fonts, but do not rely on them unless you are using the locale mechanism.
!localeFilter (class LocaleFilter)
!        Specifies the file name for the encoding converter from/to locale encodings and UTF-8 which is used with the -lc option or  locale  resource.
!        The help message shown by “xterm -help” lists the default value, which depends on your system configuration.
!        If the encoding converter requires command-line parameters, you can add those after the command, e.g.,
!            *localeFilter: xterm-filter -p
!        Alternatively,  you  may  put  those  parameter  within  a shell script to execute the converter, and set this resource to point to the shell
!        script.
!        When using a locale-filter, e.g., with the -e option, or the shell, xterm first tries passing control via that filter.  If  it  fails,  xterm
!        will retry without the locale-filter.  Xterm warns about the failure before retrying.
!loginShell (class LoginShell)
!        Specifies whether or not the shell to be run in the window should be started as a login shell.  The default is “false”.
!marginBell (class MarginBell)
!        Specifies whether or not the bell should be rung when the user types near the right margin.  The default is “false”.
!metaSendsEscape (class MetaSendsEscape)
!        If  “true”,  Meta characters (a character combined with the Meta modifier key) are converted into a two-character sequence with the character
!        itself preceded by ESC.  This applies as well to function key control sequences, unless xterm sees that Meta is used  in  your  key  transla‐
!        tions.  If “false”, Meta characters input from the keyboard are handled according to the eightBitInput resource.  The default is “False”.
!mkSamplePass (class MkSamplePass)
!        If  mkSampleSize is nonzero, and mkWidth (and cjkWidth) are false, on startup xterm compares its built-in tables to the system^s wide charac‐
!        ter width data to decide if it will use the system^s data.  It tests the first mkSampleSize character values, and allows up  to  mkSamplePass
!        mismatches before the test fails.  The default (for the allowed number of mismatches) is 256.
!mkSampleSize (class MkSampleSize)
!        With  mkSamplePass, this specifies a startup test used for initializing wide character width calculations.  The default (number of characters
!        to check) is 1024.
!mkWidth (class MkWidth)
!        Specifies whether xterm should use a built-in version of the wide character width calculation.  See also  the  cjkWidth  resource  which  can
!        override this.  The default is “false”.
!        Here is a summary of the resources which control the choice of wide character width calculation:
!        cjkWidth   mkWidth   Action
!        ───────────────────────────────────────────────────────────────
!        false      false     use system tables subject to mkSamplePass
!        false      true      use built-in tables
!        true       false     use built-in CJK tables
!        true       true      use built-in CJK tables
!modifyCursorKeys (class ModifyCursorKeys)
!        Tells  how  to  handle  the  special  case  where Control-, Shift-, Alt- or Meta-modifiers are used to add a parameter to the escape sequence
!        returned by a cursor-key.  The default is “2”:
!        -1   disables the feature.
!        0    uses the old/obsolete behavior.
!        1    prefixes modified sequences with CSI.
!        2    forces the modifier to be the second parameter if it would otherwise be the first.
!        3    marks the sequence with a “>” to hint that it is private.
!modifyFunctionKeys (class ModifyFunctionKeys)
!        Tells how to handle the special case where Control-, Shift-, Alt- or Meta-modifiers are used to  add  a  parameter  to  the  escape  sequence
!        returned by a (numbered) function-key.  The default is “2”.  The resource values are similar to modifyCursorKeys:
!        -1   permits the user to use shift- and control-modifiers to construct function-key strings using the normal encoding scheme.
!        0    uses the old/obsolete behavior.
!        1    prefixes modified sequences with CSI.
!        2    forces the modifier to be the second parameter if it would otherwise be the first.
!        3    marks the sequence with a “>” to hint that it is private.
!        If  modifyFunctionKeys  is zero, xterm uses Control- and Shift-modifiers to allow the user to construct numbered function-keys beyond the set
!        provided by the keyboard:
!        Control
!             adds the value given by the ctrlFKeys resource.
!        Shift
!             adds twice the value given by the ctrlFKeys resource.
!        Control/Shift
!             adds three times the value given by the ctrlFKeys resource.
!modifyKeyboard (class ModifyKeyboard)
!        Normally xterm makes a special case regarding modifiers (shift, control, etc.)  to handle special keyboard layouts (legacy and vt220).   This
!        is done to provide compatible keyboards for DEC VT220 and related terminals that implement user-defined keys (UDK).
!        The bits of the resource value selectively enable modification of the given category when these keyboards are selected.  The default is “0”:
!        0    The  legacy/vt220  keyboards  interpret  only the Control-modifier when constructing numbered function-keys.  Other special keys are not
!             modified.
!        1    allows modification of the numeric keypad
!        2    allows modification of the editing keypad
!        4    allows modification of function-keys, overrides use of Shift-modifier for UDK.
!        8    allows modification of other special keys
!modifyOtherKeys (class ModifyOtherKeys)
!        Like modifyCursorKeys, tells xterm to construct an escape sequence for other keys (such as “2”) when modified by Control-, Alt- or Meta-modi‐
!        fiers.  This feature does not apply to function keys and well-defined keys such as ESC or the control keys.  The default is “0”:
!        0    disables this feature.
!        1    enables  this feature for keys except for those with well-known behavior, e.g., Tab, Backarrow and some special control character cases,
!             e.g., Control-Space to make a NUL.
!        2    enables this feature for keys including the exceptions listed.
!multiClickTime (class MultiClickTime)
!        Specifies the maximum time in milliseconds between multi-click select events.  The default is “250” milliseconds.
!multiScroll (class MultiScroll)
!        Specifies whether or not scrolling should be done asynchronously.  The default is “false”.
!nMarginBell (class Column)
!        Specifies the number of characters from the right margin at which the margin bell should be rung, when enabled by  the  marginBell  resource.
!        The default is “10”.
!numLock (class NumLock)
!        If  “true”,  xterm  checks if NumLock is used as a modifier (see xmodmap(1)).  If so, this modifier is used to simplify the logic when imple‐
!        menting special NumLock for the sunKeyboard resource.  Also (when sunKeyboard is false), similar logic is used to find the  modifier  associ‐
!        ated with the left and right Alt keys.  The default is “true”.
!oldXtermFKeys (class OldXtermFKeys)
!        If  “true”,  xterm will use old-style control sequences for function keys F1 to F4, for compatibility with X Consortium xterm.  Otherwise, it
!        uses the VT100-style codes for PF1 to PF4.  The default is “false”.
!on2Clicks (class On2Clicks)
!on3Clicks (class On3Clicks)
!on4Clicks (class On4Clicks)
!on5Clicks (class On5Clicks)
!        Specify selection behavior in response to multiple mouse clicks.  A single mouse click is always interpreted as described  in  the  SELECTION
!        section  (see  POINTER USAGE).  Multiple mouse clicks (using the button which activates the select-start action) are interpreted according to
!        the resource values of on2Clicks, etc.  The resource value can be one of these:
!        word
!           Select a “word” as determined by the charClass resource.  See the CHARACTER CLASSES section.
!        line
!           Select a line (counting wrapping).
!        group
!           Select a group of adjacent lines (counting wrapping).  The selection stops on a blank line, and does not extend outside the current page.
!        page
!           Select all visible lines, i.e., the page.
!        all
!           Select all lines, i.e., including the saved lines.
!        regex
!           Select a “word” as determined by the regular expression which follows in the resource value.
!        none
!           No selection action is associated with this resource.  xterm interprets it as the end of the list.  For example, you may use it to disable
!           triple (and higher) clicking by setting on3Clicks to “none”.
!        The  default  values  for on2Clicks and on3Clicks are “word” and “line”, respectively.  There is no default value for on4Clicks or on5Clicks,
!        making those inactive.  On startup, xterm determines the maximum number of clicks by the onXClicks resource values which are set.
!openIm (class XtCOpenIm)
!        Tells xterm whether to open the input method at startup.  The default is “true”.
!pointerColor (class PointerColor)
!        Specifies the foreground color of the pointer.  The default is “XtDefaultForeground”.
!pointerColorBackground (class PointerColorBackground)
!        Specifies the background color of the pointer.  The default is “XtDefaultBackground”.
!pointerMode (class PointerMode)
!        Specifies when the pointer may be hidden as the user types.  It will be redisplayed if the user moves the mouse, or clicks one  of  its  but‐
!        tons.
!        0  never
!        1  the application running in xterm has not activated mouse mode.  This is the default.
!        2  always.
!pointerShape (class Cursor)
!        Specifies the name of the shape of the pointer.  The default is “xterm”.
!popOnBell (class PopOnBell)
!        Specifies whether the window would be raised when Control-G is received.  The default is “false”.
!        If the window is iconified, this has no effect.  However, the zIconBeep resource provides you with the ability to see which iconified windows
!        have sounded a bell.
!precompose (class XtCPrecompose)
!        Tells xterm whether to precompose UTF-8 data into Normalization Form C, which combines commonly-used accents onto  base  characters.   If  it
!        does not do this, accents are left as separatate characters.  The default is “true”.
!preeditType (class XtCPreeditType)
!        Tells xterm which types of preedit (preconversion) string to display.  The default is “OverTheSpot,Root”.
!printAttributes (class PrintAttributes)
!        Specifies  whether  to  print graphic attributes along with the text.  A real DEC VTxxx terminal will print the underline, highlighting codes
!        but your printer may not handle these.
!        ·   “0” disables the attributes.
!        ·   “1” prints the normal set of attributes (bold, underline, inverse and blink) as VT100-style control sequences.
!        ·   “2” prints ANSI color attributes as well.
!        The default is “1”.
!printFileImmediate (PrintFileImmediate)
!        When the print-immediate action is invoked, xterm prints the screen contents directly to a file.  Set this resource  to  the  prefix  of  the
!        filename (a timestamp will be appended to the actual name).
!        The default is an empty string, i.e., “”, However, when the print-immediate action is invoked, if the string is empty, then “XTerm” is used.
!printFileOnXError (PrintFileOnXError)
!        If  xterm  exits with an X error, e.g., your connection is broken when the server crashes, it can be told to write the contents of the screen
!        to a file.  To enable the feature, set this resource to the prefix of the filename (a timestamp will be appended to the actual name).
!        The default is an empty string, i.e., “”, which disables this feature.  However, when the print-on-error action is invoked, if the string  is
!        empty, then “XTermError” is used.
!        These error codes are handled: ERROR_XERROR, ERROR_XIOERROR and ERROR_ICEERROR.
!printModeImmediate (PrintModeImmediate)
!        When the print-immediate action is invoked, xterm prints the screen contents directly to a file.  You can use the printModeImmediate resource
!        to tell it to use escape sequences to reconstruct the video attributes and  colors.   This  uses  the  same  values  as  the  printAttributes
!        resource.  The default is “0”.
!printModeOnXError (PrintModeOnXError)
!        Xterm implements the printFileOnXError feature using the printer feature, although the output is written directly to a file.  You can use the
!        printModeOnXError resource to tell it to use escape sequences to reconstruct the video attributes and colors.  This uses the same  values  as
!        the printAttributes resource.  The default is “0”.
!printOptsImmediate (PrintOptsImmediate)
!        Specify the range of text which is printed to a file when the print-immediately action is invoked.
!        ·   If  zero (0), then this selects the current (visible screen) plus the saved lines, except if the alternate screen is being used.  In that
!            case, only the alternate screen is selectd.
!        ·   If nonzero, the bits of this resource value (checked in descending order) select the range:
!            8  selects the saved lines.
!            4  selects the alternate screen.
!            2  selects the normal screen.
!            1  selects the current screen, which can be either the normal or alternate screen.
!        The default is “9”, which selects the current visible screen plus saved lines, with no special case for the alternated screen.
!printOptsOnXError (PrintOptsOnXError)
!        Specify the range of text which is printed to a file when the print-on-error action is invoked.  The resource value is interpreted  the  same
!        as in printOptsImmediate.
!        The default is “9”, which selects the current visible screen plus saved lines, with no special case for the alternated screen.
!printerAutoClose (class PrinterAutoClose)
!        If “true”, xterm will close the printer (a pipe) when the application switches the printer offline with a Media Copy command.  The default is
!        “false”.
!printerCommand (class PrinterCommand)
!        Specifies a shell command to which xterm will open a pipe when the first MC (Media Copy) command is  initiated.   The  default  is  an  empty
!        string, i.e., “”.  If the resource value is given as an empty string, the printer is disabled.
!printerControlMode (class PrinterControlMode)
!        Specifies  the printer control mode.  A “1” selects autoprint mode, which causes xterm to print a line from the screen when you move the cur‐
!        sor off that line with a line feed, form feed or vertical tab character, or an autowrap occurs.  Autoprint mode is overridden by printer con‐
!        troller mode (a “2”), which causes all of the output to be directed to the printer.  The default is “0”.
!printerExtent (class PrinterExtent)
!        Controls  whether a print page function will print the entire page (true), or only the the portion within the scrolling margins (false).  The
!        default is “false”.
!printerFormFeed (class PrinterFormFeed)
!        Controls whether a form feed is sent to the printer at the end of a print page function.  The default is “false”.
!printerNewLine (class PrinterNewLine)
!        Controls whether a newline is sent to the printer at the end of a print page function.  The default is “true”.
!privateColorRegisters (class privateColorRegisters)
!        If true, allocate separate color registers for each sixel device control string, e.g., for DECGCI.  If not true, color  registers  are  allo‐
!        cated only once, when the terminal is reset.  The default is “true”.
!quietGrab (class QuietGrab)
!        Controls  whether  the  cursor is repainted when NotifyGrab and NotifyUngrab event types are received during change of focus.  The default is
!        “false”.
!renderFont (class RenderFont)
!        If xterm is built with the Xft library, this controls whether the faceName resource is used.  The default is “default”.
!        The resource values are strings, evaluated as booleans after startup.
!        false
!             disable the feature and use the normal (bitmap) font.
!        true
!             startup using the TrueType font specified by the faceName and faceSize resource settings.  If there is no value  for  faceName,  disable
!             the feature and use the normal (bitmap) font.
!             After startup, you can still switch to/from the bitmap font using the “TrueType Fonts” menu entry.
!        default
!             startup using the normal (bitmap) font, but enable the “TrueType Fonts” menu entry to allow runtime switching to/from TrueType fonts.
!             If there is no faceName resource set, then runtime switching to TrueType fonts is disabled.  Xterm has a separate  compiled-in value for
!             faceName for the special case where renderFont is “default”.  That is normally “mono”.
!resizeGravity (class ResizeGravity)
!        Affects the behavior when the window is resized to be taller or shorter.  NorthWest specifies that the top line of text on  the  screen  stay
!        fixed.   If the window is made shorter, lines are dropped from the bottom; if the window is made taller, blank lines are added at the bottom.
!        This is compatible with the behavior in R4.  SouthWest (the default) specifies that the bottom line of text on the screen stay fixed.  If the
!        window  is  made  taller, additional saved lines will be scrolled down onto the screen; if the window is made shorter, lines will be scrolled
!        off the top of the screen, and the top saved lines will be dropped.
!retryInputMethod (class XtCRetryInputMethod)
!        Tells xterm how many times to retry, in case the input-method server is not responding.  This is a different issue than  unsupported  preedit
!        type,  etc.   You  may encounter retries if your X configuration (and its libraries) are missing pieces.  Setting this resource to zero ``0^^
!        will cancel the retrying.  The default is ``3^^.
!reverseVideo (class ReverseVideo)
!        Specifies whether or not reverse video should be simulated.  The default is “false”.
!        There are several aspects to reverse video in xterm:
!        ·   The command-line -rv option tells the X libraries to reverse the foreground and background  colors.   Xterm^s  command-line  options  set
!            resource values.  In particular, the X Toolkit sets the reverseVideo resource when the -rv option is used.
!        ·   If  the  user has also used command-line options -fg or -bg to set the foreground and background colors, xterm does not see these options
!            directly.  Instead, it examines the resource values to reconstruct the command-line options, and determine which of  the  colors  is  the
!            user^s  intended  foreground,  etc.   Their  actual values are irrelevant to the reverse video function; some users prefer the X defaults
!            (black text on a white background), others prefer white text on a black background.
!        ·   After startup, the user can toggle the “Enable Reverse Video” menu entry.  This exchanges the current foreground and background colors of
!            the VT100 widget, and repaints the screen.  Because of the X resource hierarchy, the reverseVideo resource applies to more than the VT100
!            widget.
!        Programs running in an xterm can also use control sequences to enable the VT100 reverse video mode.  These are independent of  the  reverseV‐
!        ideo  resource  and the menu entry.  Xterm exchanges the current foreground and background colors when drawing text affected by these control
!        sequences.
!        Other control sequences can alter the foreground and background colors which are used:
!        ·   Programs can also use the ANSI color control sequences to set the foreground and background colors.
!        ·   Extensions to the ANSI color controls (such as 16-, 88- or 256-colors) are treated similarly to the ANSI control.
!        ·   Using other control sequences (the “dynamic colors” feature), a program can change the foreground and background colors.
!reverseWrap (class ReverseWrap)
!        Specifies whether or not reverse-wraparound should be enabled.  This corresponds to xterm^s private mode 45.  The default is “false”.
!rightScrollBar (class RightScrollBar)
!        Specifies whether or not the scrollbar should be displayed on the right rather than the left.  The default is “false”.
!saveLines (class SaveLines)
!        Specifies the number of lines to save beyond the top of the screen when a scrollbar is turned on.  The default is “64”.
!scrollBar (class ScrollBar)
!        Specifies whether or not the scrollbar should be displayed.  The default is “false”.
!scrollBarBorder (class ScrollBarBorder)
!        Specifies the width of the scrollbar border.  Note that this is drawn to overlap the border of the xterm window.  Modifying  the  scrollbar^s
!        border affects only the line between the VT100 widget and the scrollbar.  The default value is 1.
!scrollKey (class ScrollCond)
!        Specifies  whether  or  not pressing a key should automatically cause the scrollbar to go to the bottom of the scrolling region.  This corre‐
!        sponds to xterm^s private mode 1011.  The default is “false”.
!scrollLines (class ScrollLines)
!        Specifies the number of lines that the scroll-back and scroll-forw actions should use as a default.  The default value is 1.
!scrollTtyOutput (class ScrollCond)
!        Specifies whether or not output to the terminal should automatically cause the scrollbar to go to the bottom of the  scrolling  region.   The
!        default is “true”.
!selectToClipboard (class SelectToClipboard)
!        Tells  xterm  whether to use the PRIMARY or CLIPBOARD for SELECT tokens in the selection mechanism.  The set-select action can change this at
!        runtime, allowing the user to work with programs that handle only one of these mechanisms.  The default is “false”, which  tells  it  to  use
!        PRIMARY.
!shiftFonts (class ShiftFonts)
!        Specifies  whether  to  enable the actions larger-vt-font() and smaller-vt-font(), which are normally bound to the shifted KP_Add and KP_Sub‐
!        tract.  The default is “true”.
!showBlinkAsBold (class ShowBlinkAsBold)
!        Tells xterm whether to display text with blink-attribute the same as bold.  If xterm has not been configured to support  blinking  text,  the
!        default is “true”, which corresponds to older versions of xterm, otherwise the default is “false”.
!showMissingGlyphs (class ShowMissingGlyphs)
!        Tells  xterm  whether  to  display  a  box outlining places where a character has been used that the font does not represent.  The default is
!        “false”.
!showWrapMarks (class ShowWrapMarks)
!        For debugging xterm and applications that may manipulate the wrapped-line flag by writing text at the right margin, show a mark on the  right
!        inner-border of the window.  The mark shows which lines have the flag set.
!signalInhibit (class SignalInhibit)
!        Specifies whether or not the entries in the “Main Options” menu for sending signals to xterm should be disallowed.  The default is “false”.
!sixelScrolling (class SixelScrolling)
!        If true, graphics scroll up one line at a time when sixels would be written past the bottom line on the window.  The default is “false”.
!tekGeometry (class Geometry)
!        Specifies the preferred size and position of the Tektronix window.  There is no default for this resource.
!tekInhibit (class TekInhibit)
!        Specifies whether or not the escape sequence to enter Tektronix mode should be ignored.  The default is “false”.
!tekSmall (class TekSmall)
!        Specifies  whether  or not the Tektronix mode window should start in its smallest size if no explicit geometry is given.  This is useful when
!        running xterm on displays with small screens.  The default is “false”.
!tekStartup (class TekStartup)
!        Specifies whether or not xterm should start up in Tektronix mode.  The default is “false”.
!tiXtraScroll (class TiXtraScroll)
!        Specifies whether xterm should scroll to a new page when processing the ti termcap entry, i.e., the private modes 47, 1047 or 1049.  This  is
!        only  in  effect if titeInhibit is “true”, because the intent of this option is to provide a picture of the full-screen application^s display
!        on the scrollback without wiping out the text that would be shown before the application was initialized.  The default for this  resource  is
!        “false”.
!titeInhibit (class TiteInhibit)
!        Specifies  whether  or not xterm should remove ti and te termcap entries (used to switch between alternate screens on startup of many screen-
!        oriented programs) from the TERMCAP string.  If set, xterm also ignores the escape sequence to switch to the alternate  screen.   Xterm  sup‐
!        ports  terminfo  in  a different way, supporting composite control sequences (also known as private modes) 1047, 1048 and 1049 which have the
!        same effect as the original 47 control sequence.  The default for this resource is “false”.
!titleModes (class TitleModes)
!        Tells xterm whether to accept or return window- and icon-labels in ISO-8859-1 (the default) or UTF-8.  Either can be encoded in  hexadecimal.
!        The default for this resource is “0”.
!        Each bit (bit “0” is 1, bit “1” is 2, etc.)  corresponds to one of the parameters set by the title modes control sequence:
!        0    Set window/icon labels using hexadecimal
!        1    Query window/icon labels using hexadecimal
!        2    Set window/icon labels using UTF-8 (overrides utf8Title resource).
!        3    Query window/icon labels using UTF-8
!translations (class Translations)
!        Specifies  the  key  and button bindings for menus, selections, “programmed strings”, etc.  The translations resource, which provides much of
!        xterm^s configurability, is a feature of the X Toolkit Intrinsics library (Xt).  See the ACTIONS section.
!trimSelection (class TrimSelection)
!        If you set highlightSelection, you can see the text which is selected, including any trailing spaces.  Clearing the screen (or a line) resets
!        it  to a state containing no spaces.  Some lines may contain trailing spaces when an application writes them to the screen.  However, you may
!        not wish to paste lines with trailing spaces.  If this resource is true, xterm will trim trailing spaces from text  which  is  selected.   It
!        does not affect spaces which result in a wrapped line, nor will it trim the trailing newline from your selection.  The default is “false”.
!underLine (class UnderLine)
!        This  specifies whether or not text with the underline attribute should be underlined.  It may be desirable to disable underlining when color
!        is being used for the underline attribute.  The default is “true”.
!useClipping (class UseClipping)
!        Tell xterm whether to use clipping to keep from producing dots outside the text drawing area.  Originally used to work around for  overstrik‐
!        ing effects, this is also needed to work with some incorrectly-sized fonts.  The default is “true”.
!utf8 (class Utf8)
!        This specifies whether xterm will run in UTF-8 mode.  If you set this resource, xterm also sets the wideChars resource as a side-effect.  The
!        resource can be set via the menu entry “UTF-8 Encoding”.  The default is “default”.
!        Xterm accepts either a keyword (ignoring case) or the number shown in parentheses:
!        false (0)
!           UTF-8 mode is initially off.  The command-line option +u8 sets the resource to this value.  Escape sequences for turning UTF-8 mode on/off
!           are allowed.
!        true (1)
!           UTF-8 mode is initially on.  Escape sequences for turning UTF-8 mode on/off are allowed.
!        always (2)
!           The command-line option -u8 sets the resource to this value.  Escape sequences for turning UTF-8 mode on/off are ignored.
!        default (3)
!           This is the default value of the resource.  It is changed during initialization depending on whether the locale resource was set, to false
!           (0) or always (2).  See the locale resource for additional discussion of non-UTF-8 locales.
!        If you want to set the value of utf8, it should be in this range.  Other nonzero values are treated the same as “1”, i.e., UTF-8 mode is ini‐
!        tially on, and escape sequences for turning UTF-8 mode on/off are allowed.
!utf8Fonts (class Utf8Fonts)
!        See  the  discussion  of  the  locale  resource.   This  specifies whether xterm will use UTF-8 fonts specified via resource patterns such as
!        “*VT100.Utf8Fonts.font” or normal (ISO-8859-1) fonts via patterns such as “*VT100.font”.  The resource can be set via the menu  entry  “UTF-8
!        Fonts”.  The default is “default”. Xterm accepts either a keyword (ignoring case) or the number shown in parentheses:
!          false   (0) Use the ISO-8859-1 fonts.  The menu entry is enabled, allowing the choice of fonts to be changed at runtime.
!          true    (1) Use the UTF-8 fonts.  The menu entry is enabled, allowing the choice of fonts to be changed at runtime.
!          always  (2) Always use the UTF-8 fonts.  This also disables the menu entry.
!          default (3) At startup, the resource is set to true or false, according to the effective value of the utf8 resource.
!utf8Latin1 (class Utf8Latin1)
!        If true, allow an ISO-8859-1 normal font to be combined with an ISO-10646 font if the latter is given via the -fw option or its corresponding
!        resource value.  The default is “false”.
!utf8SelectTypes (class Utf8SelectTypes)
!        Override xterm^s default selection target list (see SELECT/PASTE) for selections in wide-character (UTF-8) mode.  The  default  is  an  empty
!        string, i.e., “”, which does not override anything.
!utf8Title (class Utf8Title)
!        Applications can set xterm^s title by writing a control sequence.  Normally this control sequence follows the VT220 convention, which encodes
!        the string in ISO-8859-1 and allows for an 8-bit string terminator.  If xterm is started in a UTF-8  locale,  it  translates  the  ISO-8859-1
!        string to UTF-8 to work with the X libraries which assume the string is UTF-8.
!        However,  some  users  may wish to write a title string encoded in UTF-8.  The window manager is responsible for drawing window titles.  Some
!        window managers (not all) support UTF-8 encoding of window titles.  Set this resource to “true” to allow UTF-8 encoded title  strings.   That
!        cancels the translation to UTF-8, allowing UTF-8 strings to be displayed as is.
!        This feature is available as a menu entry, since it is related to the particular applications you are running within xterm.  You can also use
!        a control sequence (see the discussion of “Title Modes” in the control sequences document),  to  set  an  equivalent  flag.   The  titleModes
!        resource sets the same value, which overrides this resource.
!        The default is “false”.
!veryBoldColors (class VeryBoldColors)
!        Specifies  whether to combine video attributes with colors specified by colorBD, colorBL, colorRV and colorUL.  The resource value is the sum
!        of values for each attribute:
!          1 for reverse,
!          2 for underline,
!          4 for bold and
!          8 for blink.
!        The default is “0”.
!visualBell (class VisualBell)
!        Specifies whether or not a visible bell (i.e., flashing) should be used instead of an audible bell when Control-G is received.   The  default
!        is “false”, which tells xterm to use an audible bell.
!visualBellDelay (class VisualBellDelay)
!        Number of milliseconds to delay when displaying a visual bell.  Default is 100.  If set to zero, no visual bell is displayed.  This is useful
!        for very slow displays, e.g., an LCD display on a laptop.
!visualBellLine (class VisualBellLine)
!        Specifies whether to flash only the current line when displaying a visual bell.  rather than flashing  the  entire  screen:  The  default  is
!        “false”, which tells xterm to flash the entire screen.
!vt100Graphics (class VT100Graphics)
!        This  specifies whether xterm will interpret VT100 graphic character escape sequences while in UTF-8 mode.  The default is “true”, to provide
!        support for various legacy applications.
!wideBoldFont (class WideBoldFont)
!        This option specifies the font to be used for displaying bold wide text.  By default, it will attempt to use a font twice as wide as the font
!        that will be used to draw bold text.  If no double-width font is found, it will improvise, by stretching the bold font.
!wideChars (class WideChars)
!        Specifies if xterm should respond to control sequences that process 16-bit characters.  The default is “false”.
!wideFont (class WideFont)
!        This option specifies the font to be used for displaying wide text.  By default, it will attempt to use a font twice as wide as the font that
!        will be used to draw normal text.  If no double-width font is found, it will improvise, by stretching the normal font.
!ximFont (class XimFont)
!        This option specifies the font to be used for displaying the preedit string in the “OverTheSpot” input method.
!        In “OverTheSpot” preedit type, the preedit (preconversion) string is displayed at the position of the cursor.  It is the XIM server^s respon‐
!        sibility  to  display  the  preedit string.  The XIM client must inform the XIM server of the cursor position.  For best results, the preedit
!        string must be displayed with a proper font.  Therefore, xterm informs the XIM server of the proper font.  The  font  is  be  supplied  by  a
!        "fontset", whose default value is “*”.  This matches every font, the X library automatically chooses fonts with proper charsets.  The ximFont
!        resource is provided to override this default font setting.
!  Tek4014 Widget Resources
!The following resources are specified as part of the tek4014 widget (class Tek4014).  These are specified by patterns such as “XTerm.tek4014.NAME”:
!font2 (class Font)
!        Specifies font number 2 to use in the Tektronix window.
!font3 (class Font)
!fontLarge (class Font)
!        Specifies the large font to use in the Tektronix window.
!fontSmall (class Font)
!        Specifies the small font to use in the Tektronix window.
!ginTerminator (class GinTerminator)
!        Specifies what character(s) should follow a GIN report or status report.  The possibilities are “none”, which sends  no  terminating  charac‐
!        ters, “CRonly”, which sends CR, and “CR&EOT”, which sends both CR and EOT.  The default is “none”.
!height (class Height)
!        Specifies the height of the Tektronix window in pixels.
!initialFont (class InitialFont)
!        Specifies which of the four Tektronix fonts to use initially.  Values are the same as for the set-tek-text action.  The default is “large”.
!width (class Width)
!        Specifies the width of the Tektronix window in pixels.
!  Menu Resources
!The  resources that may be specified for the various menus are described in the documentation for the Athena SimpleMenu widget.  The name and classes
!of the entries in each of the menus are listed below.  Resources named “lineN” where N is a number are separators with class SmeLine.
!As with all X resource-based widgets, the labels mentioned are customary defaults for the application.
!The Main Options menu (widget name mainMenu) has the following entries:
!toolbar (class SmeBSB)
!        This entry invokes the set-toolbar(toggle) action.
!securekbd (class SmeBSB)
!        This entry invokes the secure() action.
!allowsends (class SmeBSB)
!        This entry invokes the allow-send-events(toggle) action.
!redraw (class SmeBSB)
!        This entry invokes the redraw() action.
!logging (class SmeBSB)
!        This entry invokes the logging(toggle) action.
!print-immediate (class SmeBSB)
!        This entry invokes the print-immediate() action.
!print-on-error (class SmeBSB)
!        This entry invokes the print-on-error() action.
!print (class SmeBSB)
!        This entry invokes the print() action.
!print-redir (class SmeBSB)
!        This entry invokes the print-redir() action.
!8-bit-control (class SmeBSB)
!        This entry invokes the set-8-bit-control(toggle) action.
!backarrow key (class SmeBSB)
!        This entry invokes the set-backarrow(toggle) action.
!num-lock (class SmeBSB)
!        This entry invokes the set-num-lock(toggle) action.
!alt-esc (class SmeBSB)
!        This entry invokes the alt-sends-escape(toggle) action.
!meta-esc (class SmeBSB)
!        This entry invokes the meta-sends-escape(toggle) action.
!delete-is-del (class SmeBSB)
!        This entry invokes the delete-is-del(toggle) action.
!oldFunctionKeys (class SmeBSB)
!        This entry invokes the old-function-keys(toggle) action.
!hpFunctionKeys (class SmeBSB)
!        This entry invokes the hp-function-keys(toggle) action.
!scoFunctionKeys (class SmeBSB)
!        This entry invokes the sco-function-keys(toggle) action.
!sunFunctionKeys (class SmeBSB)
!        This entry invokes the sun-function-keys(toggle) action.
!sunKeyboard (class SmeBSB)
!        This entry invokes the sunKeyboard(toggle) action.
!suspend (class SmeBSB)
!        This entry invokes the send-signal(tstp) action on systems that support job control.
!continue (class SmeBSB)
!        This entry invokes the send-signal(cont) action on systems that support job control.
!interrupt (class SmeBSB)
!        This entry invokes the send-signal(int) action.
!hangup (class SmeBSB)
!        This entry invokes the send-signal(hup) action.
!terminate (class SmeBSB)
!        This entry invokes the send-signal(term) action.
!kill (class SmeBSB)
!        This entry invokes the send-signal(kill) action.
!quit (class SmeBSB)
!        This entry invokes the quit() action.
!The VT Options menu (widget name vtMenu) has the following entries:
!scrollbar (class SmeBSB)
!        This entry invokes the set-scrollbar(toggle) action.
!jumpscroll (class SmeBSB)
!        This entry invokes the set-jumpscroll(toggle) action.
!reversevideo (class SmeBSB)
!        This entry invokes the set-reverse-video(toggle) action.
!autowrap (class SmeBSB)
!        This entry invokes the set-autowrap(toggle) action.
!reversewrap (class SmeBSB)
!        This entry invokes the set-reversewrap(toggle) action.
!autolinefeed (class SmeBSB)
!        This entry invokes the set-autolinefeed(toggle) action.
!appcursor (class SmeBSB)
!        This entry invokes the set-appcursor(toggle) action.
!appkeypad (class SmeBSB)
!        This entry invokes the set-appkeypad(toggle) action.
!scrollkey (class SmeBSB)
!        This entry invokes the set-scroll-on-key(toggle) action.
!scrollttyoutput (class SmeBSB)
!        This entry invokes the set-scroll-on-tty-output(toggle) action.
!allow132 (class SmeBSB)
!        This entry invokes the set-allow132(toggle) action.
!cursesemul (class SmeBSB)
!        This entry invokes the set-cursesemul(toggle) action.
!visualbell (class SmeBSB)
!        This entry invokes the set-visualbell(toggle) action.
!bellIsUrgent (class SmeBSB)
!        This entry invokes the set-bellIsUrgent(toggle) action.
!poponbell (class SmeBSB)
!        This entry invokes the set-poponbell(toggle) action.
!cursorblink (class SmeBSB)
!        This entry invokes the set-cursorblink(toggle) action.
!titeInhibit (class SmeBSB)
!        This entry invokes the set-titeInhibit(toggle) action.
!activeicon (class SmeBSB)
!        This entry toggles active icons on and off if this feature was compiled into xterm.  It is enabled only if xterm was started with the command
!        line option +ai or the activeIcon resource is set to “true”.
!softreset (class SmeBSB)
!        This entry invokes the soft-reset() action.
!hardreset (class SmeBSB)
!        This entry invokes the hard-reset() action.
!clearsavedlines (class SmeBSB)
!        This entry invokes the clear-saved-lines() action.
!tekshow (class SmeBSB)
!        This entry invokes the set-visibility(tek,toggle) action.
!tekmode (class SmeBSB)
!        This entry invokes the set-terminal-type(tek) action.
!vthide (class SmeBSB)
!        This entry invokes the set-visibility(vt,off) action.
!altscreen (class SmeBSB)
!        This entry invokes the set-altscreen(toggle) action.
!sixelScrolling (class SmeBSB)
!        This entry invokes the set-sixel-scrolling(toggle) action.
!The VT Fonts menu (widget name fontMenu) has the following entries:
!fontdefault (class SmeBSB)
!        This entry invokes the set-vt-font(d) action, setting the font using the font (default) resource, e.g., “Default” in the menu.
!font1 (class SmeBSB)
!        This entry invokes the set-vt-font(1) action, setting the font using the font1 resource, e.g., “Unreadable” in the menu.
!font2 (class SmeBSB)
!        This entry invokes the set-vt-font(2) action, setting the font using the font2 resource, e.g., “Tiny” in the menu.
!font3 (class SmeBSB)
!        This entry invokes the set-vt-font(3) action, setting the font using the font3 resource, e.g., “Small” in the menu.
!font4 (class SmeBSB)
!        This entry invokes the set-vt-font(4) action, letting the font using the font4 resource, e.g., “Medium” in the menu.
!font5 (class SmeBSB)
!        This entry invokes the set-vt-font(5) action, letting the font using the font5 resource, e.g., “Large” in the menu.
!font6 (class SmeBSB)
!        This entry invokes the set-vt-font(6) action, letting the font using the font6 resource, e.g., “Huge” in the menu.
!fontescape (class SmeBSB)
!        This entry invokes the set-vt-font(e) action.
!fontsel (class SmeBSB)
!        This entry invokes the set-vt-font(s) action.
!font-linedrawing (class SmeBSB)
!        This entry invokes the set-font-linedrawing(s) action.
!font-packed (class SmeBSB)
!        This entry invokes the set-font-packed(s) action.
!font-doublesize (class SmeBSB)
!        This entry invokes the set-font-doublesize(s) action.
!render-font (class SmeBSB)
!        This entry invokes the set-render-font(s) action.
!utf8-mode (class SmeBSB)
!        This entry invokes the set-utf8-mode(s) action.
!utf8-title (class SmeBSB)
!        This entry invokes the set-utf8-title(s) action.
!The TEK Options menu (widget name tekMenu) has the following entries:
!tektextlarge (class SmeBSB)
!        This entry invokes the set-tek-text(large) action.
!tektext2 (class SmeBSB)
!        This entry invokes the set-tek-text(2) action.
!tektext3 (class SmeBSB)
!        This entry invokes the set-tek-text(3) action.
!tektextsmall (class SmeBSB)
!        This entry invokes the set-tek-text(small) action.
!tekpage (class SmeBSB)
!        This entry invokes the tek-page() action.
!tekreset (class SmeBSB)
!        This entry invokes the tek-reset() action.
!tekcopy (class SmeBSB)
!        This entry invokes the tek-copy() action.
!vtshow (class SmeBSB)
!        This entry invokes the set-visibility(vt,toggle) action.
!vtmode (class SmeBSB)
!        This entry invokes the set-terminal-type(vt) action.
!tekhide (class SmeBSB)
!        This entry invokes the set-visibility(tek,toggle) action.
!  Scrollbar Resources
!The following resources are useful when specified for the Athena Scrollbar widget:
!thickness (class Thickness)
!        Specifies the width in pixels of the scrollbar.
!background (class Background)
!        Specifies the color to use for the background of the scrollbar.
!foreground (class Foreground)
!        Specifies  the  color  to use for the foreground of the scrollbar.  The “thumb” of the scrollbar is a simple checkerboard pattern alternating
!        pixels for foreground and background color.

!man xvt
!X RESOURCES - Almost all command line optionz have Xrc counterparts && use class name "XTerm" so settingz should work for both xterm && xvt (but they do not).
!   Command line           X resource:  instance          Class
!───────────────────────────────────────────────────────────────────────
!-bg or -background                   background        Background
!-bd                                  borderColor       BorderColor
!-bw                                  borderWidth       BorderWidth
!-C  or -console                      -                 -
!-cc                                  charClass         CharClass
!-cr                                  cursorColor       CursorColor
!-display                             -                 -
!-e                                   -                 -
!-fb                                  boldFont          BoldFont
!-fn or -font                         font              Font
!-fg or -foreground                   foreground        Foreground
!-geometry                            geometry          Geometry
!-iconic                              iconic            Iconic
!-ls                                  loginShell        LoginShell
!-msg                                 messages          Messages
!-n                                   iconName          IconName
!-name                                -                 -
!-rv                                  reverseVideo      ReverseVideo
!-rw                                  reverseWrap       ReverseWrap
!-sb                                  scrollBar         ScrollBar
!-sf                                  sunFunctionKeys   SunFunctionKeys
!-sl                                  saveLines         SaveLines
!-T  or -title                        title             Title
!-8 (on)  &&  -7 (off)                eightBitInput     EightBitInput
! study aterm options && .zshrc At() parameters to make these settings more comfortable
ATerm*geometry:                 160x50
!ATerm*font:                     -*-terminus-*-*-*-*-*-*-*-*-*-*-*-*
ATerm*background:               black
ATerm*foreground:               green
ATerm*cursorColor:              white
!ATerm*transparent:              false
!ATerm*tinting:                  gray
!ATerm*shading:                  30
!ATerm*fading:                   70
!ATerm*saveLines:                65536
!ATerm*scrollBar:                true
!ATerm*scrollBar_right:          true
!ATerm*transpscrollbar:          false
!ATerm*borderwidth:              0
!man pterm
!X RESOURCES
! pterm  can  be  more completely configured by means of X resources. All of these resources are of the form pterm.FOO for some FOO; you can make pterm
! look them up under another name, such as xyz.FOO, by specifying the command-line option `-name xyz`.
!
!PTerm.CloseOnExit
!        This option should be set to 0, 1 or 2; the default is 2. It controls what pterm does when the process running inside it terminates. When  set
!        to  2  (the  default),  pterm will close its window as soon as the process inside it terminates. When set to 0, pterm will print the process`s
!        exit status, and the window will remain present until a key is pressed (allowing you to inspect the scrollback, and copy and paste text out of
!        it).
!
!        When  this  setting  is set to 1, pterm will close immediately if the process exits cleanly (with an exit status of zero), but the window will
!        stay around if the process exits with a non-zero code or on a signal. This enables you to see what went wrong if the process suffers an error,
!        but not to have to bother closing the window in normal circumstances.
!PTerm.WarnOnClose
!        This  option  should  be set to either 0 or 1; the default is 1. When set to 1, pterm will ask for confirmation before closing its window when
!        you press the close button.
!PTerm.TerminalType
!        This controls the value set in the TERM environment variable inside the new terminal. The default is `xterm`.
!PTerm.BackspaceIsDelete
!        This option should be set to either 0 or 1; the default is 1. When set to 0, the ordinary Backspace  key  generates  the  Backspace  character
!        (^H);  when set to 1, it generates the Delete character (^?). Whichever one you set, the terminal device inside pterm will be set up to expect
!        it.
!PTerm.RXVTHomeEnd
!        This option should be set to either 0 or 1; the default is 0. When it is set to 1, the Home and End keys generate the control  sequences  they
!        would generate in the rxvt terminal emulator, instead of the more usual ones generated by other emulators.
!PTerm.LinuxFunctionKeys
!        This  option  can  be set to any number between 0 and 5 inclusive; the default is 0. The modes vary the control sequences sent by the function
!        keys; for more complete documentation, it is probably simplest to try each option in `pterm -e cat`, and press the keys to see what they  gen‐
!        erate.
!PTerm.NoApplicationKeys
!        This  option  should be set to either 0 or 1; the default is 0. When set to 1, it stops the server from ever switching the numeric keypad into
!        application mode (where the keys send function-key-like sequences instead of numbers or arrow keys). You  probably  only  need  this  if  some
!        application is making a nuisance of itself.
!PTerm.NoApplicationCursors
!        This  option  should  be  set  to either 0 or 1; the default is 0. When set to 1, it stops the server from ever switching the cursor keys into
!        application mode (where the keys send slightly different sequences). You probably only need this if some application is making a  nuisance  of
!        itself.
!PTerm.NoMouseReporting
!        This  option  should  be  set  to  either 0 or 1; the default is 0. When set to 1, it stops the server from ever enabling mouse reporting mode
!        (where mouse clicks are sent to the application instead of controlling cut and paste).
!PTerm.NoRemoteResize
!        This option should be set to either 0 or 1; the default is 0. When set to 1, it stops the server from being able to remotely control the  size
!        of the pterm window.
!PTerm.NoAltScreen
!        This  option  should  be set to either 0 or 1; the default is 0. When set to 1, it stops the server from using the `alternate screen` terminal
!        feature, which lets full-screen applications leave the screen exactly the way they found it.
!PTerm.NoRemoteWinTitle
!        This option should be set to either 0 or 1; the default is 0. When set to 1, it stops the server from remotely controlling the  title  of  the
!        pterm window.
!PTerm.NoRemoteQTitle
!        This  option  should  be  set to either 0 or 1; the default is 1. When set to 1, it stops the server from remotely requesting the title of the
!        pterm window.
!
!        This feature is a POTENTIAL SECURITY HAZARD. If a malicious application can write data to your terminal (for example, if you merely cat a file
!        owned  by  someone  else  on  the  server  machine), it can change your window title (unless you have disabled this using the NoRemoteWinTitle
!        resource) and then use this service to have the new window title sent back to the server as if typed at the keyboard. This allows an  attacker
!        to  fake  keypresses  and  potentially cause your server-side applications to do things you didn`t want. Therefore this feature is disabled by
!        default, and we recommend you do not turn it on unless you really know what you are doing.
!PTerm.NoDBackspace
!        This option should be set to either 0 or 1; the default is 0. When set to 1, it disables the normal action of the Delete (^?)  character  when
!        sent from the server to the terminal, which is to move the cursor left by one space and erase the character now under it.
!PTerm.ApplicationCursorKeys
!        This option should be set to either 0 or 1; the default is 0. When set to 1, the default initial state of the cursor keys are application mode
!        (where the keys send function-key-like sequences instead of numbers or arrow keys). When set to 0, the default state is the normal one.
!PTerm.ApplicationKeypad
!        This option should be set to either 0 or 1; the default is 0. When set to 1, the default initial state of the numeric  keypad  is  application
!        mode (where the keys send function-key-like sequences instead of numbers or arrow keys). When set to 0, the default state is the normal one.
!PTerm.NetHackKeypad
!        This  option  should be set to either 0 or 1; the default is 0. When set to 1, the numeric keypad operates in NetHack mode. This is equivalent
!        to the -nethack command-line option.
!PTerm.Answerback
!        This option controls the string which the terminal sends in response to receiving the ^E character (`tell me about yourself`). By default this
!        string is `PuTTY`.
!PTerm.HideMousePtr
!        This  option  should  be set to either 0 or 1; the default is 0. When it is set to 1, the mouse pointer will disappear if it is over the pterm
!        window and you press a key. It will reappear as soon as you move it.
!PTerm.WindowBorder
!        This option controls the number of pixels of space between the text in the pterm window and the window  frame.  The  default  is  1.  You  can
!        increase this value, but decreasing it to 0 is not recommended because it can cause the window manager`s size hints to work incorrectly.
!PTerm.CurType
!        This  option  should  be  set  to  either 0, 1 or 2; the default is 0. When set to 0, the text cursor displayed in the window is a rectangular
!        block. When set to 1, the cursor is an underline; when set to 2, it is a vertical line.
!PTerm.BlinkCur
!        This option should be set to either 0 or 1; the default is 0. When it is set to 1, the text cursor will blink when the window is active.
!PTerm.Beep
!        This option should be set to either 0 or 2 (yes, 2); the default is 0. When it is set to 2, pterm will respond to a  bell  character  (^G)  by
!        flashing the window instead of beeping.
!PTerm.BellOverload
!        This option should be set to either 0 or 1; the default is 0. When it is set to 1, pterm will watch out for large numbers of bells arriving in
!        a short time and will temporarily disable the bell until they stop. The idea is that if you cat a binary file, the frantic beeping will mostly
!        be silenced by this feature and will not drive you crazy.
!
!        The  bell  overload mode is activated by receiving N bells in time T; after a further time S without any bells, overload mode will turn itself
!        off again.
!
!        Bell overload mode is always deactivated by any keypress in the terminal. This means it can respond to large unexpected streams of  data,  but
!        does not interfere with ordinary command-line activities that generate beeps (such as filename completion).
!PTerm.BellOverloadN
!        This option counts the number of bell characters which will activate bell overload if they are received within a length of time T. The default
!        is 5.
!PTerm.BellOverloadT
!        This option specifies the time period in which receiving N or more bells will activate bell overload mode. It is measured in microseconds,  so
!        (for example) set it to 1000000 for one second. The default is 2000000 (two seconds).
!PTerm.BellOverloadS
!        This option specifies the time period of silence required to turn off bell overload mode. It is measured in microseconds, so (for example) set
!        it to 1000000 for one second. The default is 5000000 (five seconds of silence).
!PTerm.ScrollbackLines
!        This option specifies how many lines of scrollback to save above the visible terminal screen. The default is 200. This resource is  equivalent
!        to the -sl command-line option.
!PTerm.DECOriginMode
!        This  option should be set to either 0 or 1; the default is 0. It specifies the default state of DEC Origin Mode. (If you don`t know what that
!        means, you probably don`t need to mess with it.)
!PTerm.AutoWrapMode
!        This option should be set to either 0 or 1; the default is 1. It specifies the default state of auto wrap mode. When set to 1, very long lines
!        will wrap over to the next line on the terminal; when set to 0, long lines will be squashed against the right-hand edge of the screen.
!PTerm.LFImpliesCR
!        This  option  should  be  set  to  either 0 or 1; the default is 0. When set to 1, the terminal will return the cursor to the left side of the
!        screen when it receives a line feed character.
!PTerm.WinTitle
!        This resource is the same as the -T command-line option: it controls the initial title of the window. The default is `pterm`.
!PTerm.TermWidth
!        This resource is the same as the width part of the -geometry command-line option: it controls the number of columns of text in the window. The
!        default is 80.
!PTerm.TermHeight
!        This resource is the same as the width part of the -geometry command-line option: it controls the number of columns of text in the window. The
!        defaults is 24.
PTerm.TermWidth:                160
PTerm.TermHeight:                   50
PTerm.Font:                     client:Hack 12
!PTerm*Font:                     Hack:size=8:antialias=true
!PTerm.Font            # tried: x:fixed,Hack:size=8:antialias=true but seems to have only got fixed, so trying to rmv "x:fixed," to just have Hack?
!        This resource is the same as the -fn  command-line option: it controls the font used to display normal text. The default is `fixed`.
PTerm.BoldFont:                 client:Hack Bold 12
!PTerm.BoldFont
!        This resource is the same as the -fb  command-line option: it controls the font used to display bold text when BoldAsColour is set to 0  or  2.
!        The default is unset (the font will be bolded by printing it twice at a one-pixel offset).
!PTerm.WideFont
!        This resource is the same as the -fw  command-line option: it controls the font used to display double-width characters. The default is unset
!        (double-width characters cannot be displayed).
!PTerm.WideBoldFont
!        This resource is the same as the -fwb command-line option: it controls the font used to display double-width characters in bold, when  BoldAs‐
!        Colour is set to 0 or 2. The default is unset (double-width characters are displayed in bold by printing them twice at a one-pixel offset).
!PTerm.ShadowBoldOffset
!        This resource can be set to an integer; the default is ‐1. It specifies the offset at which text is overprinted when using `shadow bold` mode.
!        The default (1) means that the text will be printed in the normal place, and also one character to the right; this seems to work well for most
!        X  bitmap  fonts, which have a blank line of pixels down the right-hand side. For some fonts, you may need to set this to ‐1, so that the text
!        is overprinted one pixel to the left; for really large fonts, you may want to set it higher than 1 (in one direction or the other).
!PTerm.BoldAsColour
!        This option should be set to either 0, 1, or 2; the default is 1. It specifies how bold text should be displayed. When set to 1, bold text  is
!        shown by displaying it in a brighter colour; when set to 0, bold text is shown by displaying it in a heavier font; when set to 2, both effects
!        happen at once (a heavy font and a brighter colour).
!PTerm.Colour0, pterm.Colour1, ..., pterm.Colour21
!        These options control the various colours used to display text in the pterm window. Each one should be specified as a triple of  decimal  num‐
!        bers giving red, green and blue values: so that black is `0,0,0`, white is `255,255,255`, red is `255,0,0` and so on.
!        Colours  0  and  1  specify the foreground colour and its bold equivalent (the -fg and -bfg command-line options). Colours 2 and 3 specify the
!        background colour and its bold equivalent (the -bg and -bbg command-line options). Colours 4 and 5 specify the text and block colours used for
!        the  cursor  (the  -cfg and -cbg command-line options). Each even number from 6 to 20 inclusive specifies the colour to be used for one of the
!        ANSI primary colour specifications (black, red, green, yellow, blue, magenta, cyan, white, in that order); the odd numbers from 7 to 21 inclu‐
!        sive specify the bold version of each colour, in the same order. The defaults are:
!
!        PTerm.Colour0: 187,187,187
!        PTerm.Colour1: 255,255,255
!        PTerm.Colour2: 0,0,0
!        PTerm.Colour3: 85,85,85
!        PTerm.Colour4: 0,0,0
!        PTerm.Colour5: 0,255,0
!        PTerm.Colour6: 0,0,0
!        PTerm.Colour7: 85,85,85
!        PTerm.Colour8: 187,0,0
!        PTerm.Colour9: 255,85,85
!        PTerm.Colour10: 0,187,0
!        PTerm.Colour11: 85,255,85
!        PTerm.Colour12: 187,187,0
!        PTerm.Colour13: 255,255,85
!        PTerm.Colour14: 0,0,187
!        PTerm.Colour15: 85,85,255
!        PTerm.Colour16: 187,0,187
!        PTerm.Colour17: 255,85,255
!        PTerm.Colour18: 0,187,187
!        PTerm.Colour19: 85,255,255
!        PTerm.Colour20: 187,187,187
!        PTerm.Colour21: 255,255,255
!PTerm.RectSelect
!        This  option should be set to either 0 or 1; the default is 0. When set to 0, dragging the mouse over several lines selects to the end of each
!        line and from the beginning of the next; when set to 1, dragging the mouse over several lines selects a  rectangular  region.  In  each  case,
!        holding down Alt while dragging gives the other behaviour.
!PTerm.MouseOverride
!        This  option should be set to either 0 or 1; the default is 1. When set to 1, if the application requests mouse tracking (so that mouse clicks
!        are sent to it instead of doing selection), holding down Shift will revert the mouse to normal selection. When set to 0, mouse  tracking  com‐
!        pletely disables selection.
!PTerm.Printer
!        This  option  is unset by default. If you set it, then server-controlled printing is enabled: the server can send control sequences to request
!        data to be sent to a printer. That data will be piped into the command you specify here; so you might want to set it to `lpr`, for example, or
!        `lpr -Pmyprinter`.
!PTerm.ScrollBar
!        This option should be set to either 0 or 1; the default is 1. When set to 0, the scrollbar is hidden (although Shift-PageUp and Shift-PageDown
!        still work). This is the same as the -sb command-line option.
!PTerm.ScrollbarOnLeft
!        This option should be set to either 0 or 1; the default is 0. When set to 1, the scrollbar will be displayed  on  the  left  of  the  terminal
!        instead of on the right.
!PTerm.ScrollOnKey
!        This option should be set to either 0 or 1; the default is 0. When set to 1, any keypress causes the position of the scrollback to be reset to
!        the very bottom.
!PTerm.ScrollOnDisp
!        This option should be set to either 0 or 1; the default is 1. When set to 1, any activity in the display causes the position of the scrollback
!        to be reset to the very bottom.
!PTerm.LineCodePage
!        This option specifies the character set to be used for the session. This is the same as the -cs command-line option.
!PTerm.NoRemoteCharset
!        This  option disables the terminal`s ability to change its character set when it receives escape sequences telling it to. You might need to do
!        this to interoperate with programs which incorrectly change the character set to something they think is sensible.
!PTerm.BCE
!        This option should be set to either 0 or 1; the default is 1. When set to 1, the various control sequences that erase parts  of  the  terminal
!        display will erase in whatever the current background colour is; when set to 0, they will erase in black always.
!PTerm.BlinkText
!        This  option  should be set to either 0 or 1; the default is 0. When set to 1, text specified as blinking by the server will actually blink on
!        and off; when set to 0, pterm will use the less distracting approach of making the text`s background colour bold.
!PTerm.StampUtmp
!        This option should be set to either 0 or 1; the default is 1. When set to 1, pterm will log the login in the various system  log  files.  This
!        resource is equivalent to the -ut command-line option.
!PTerm.LoginShell
!        This  option should be set to either 0 or 1; the default is 1. When set to 1, pterm will execute your shell as a login shell. This resource is
!        equivalent to the -ls command-line option.
! U?Rxvt here originally from Pat^s Puppy QuirkyTahr Wary 5.5.1 rel8ively minimal machine, so probably hardly applicable to Aku yet, but upd8d for Oni:
!Rxvt*keySym.0xFF50:             \001
!Rxvt*keySym.0xFF57:             \005
! but URxvt in quirky etc needs these...
!Rxvt.keySym.Home:               \033[1~
!Rxvt.keySym.End:                \033[4~
! broomdodger reports this works in both 431 and quirky (Rxvt and URxvt)...
!Rxvt.keySym.0xFF50:             \033[1~
!Rxvt.keySym.0xFF57:             \033[4~ 
!Rxvt*menu:                      ~/.rxvt.menu
!Rxvt*saveLines:                 65536

!URxvt.reverseVideo:             1
!URxvt.background:               #f8f8f8f8f8f8
!URxvt.foreground:               #000000000000
URxvt.background:               #000000000000
URxvt.foreground:               #1000f8f83000
URxvt.underlineColor:           #ffff00000000
! fonts:run `lsmf`or`lsmo` 4 list of available fonts. below was:pixelsize=14
URxvt.font:                     xft:Nimbus Mono L:style=Regular:pixelsize=12
URxvt.geometry:                 160x50
URxvt.scrollBar:                1
URxvt.scrollBar_Right:          1
URxvt.scrollTtyOutput:          0
URxvt.scrollTtyKeyPress:        1
URxvt.secondaryScroll:          1
URxvt.saveLines:                65536
URxvt.cursorUnderline:          0
URxvt.cursorBlink:              1
URxvt.borderLess:               0
URxvt.transparent:              0
URxvt.shading:                  96
!urxvt -h
!rxvt-unicode (urxvt) v9.22 - released: 2016-01-23
!options: perl,xft,styles,combining,blink,iso14755,unicode3,encodings=eu+vn+jp+jp-ext+kr+zh+zh-ext,fade,transparent,tint,pixbuf,XIM,frills,selectionscrolling,wheel,slipwheel,smart-resize,cursorBlink,pointerBlank,scrollbars=plain+rxvt+NeXT+xterm
!Usage: urxvt [-help] [--help]
! [-display string] [-tn string] [-geometry geometry] [-C] [-iconic]
! [-cd string] [-dockapp] [-/+rv] [-/+ls] [-mc number] [-/+j] [-/+ss] [-/+ptab]
! [-/+sb] [-/+sr] [-/+st] [-sbt number] [-/+si] [-/+sk] [-/+sw] [-/+ip] [-/+tr]
! [-tint color] [-sh number] [-blr HxV] [-fade number] [-fadecolor color]
! [-/+ut] [-/+vb] [-/+tcw] [-/+insecure] [-/+uc] [-/+bc] [-/+pb] [-bg color]
! [-fg color] [-hc color] [-cr color] [-pr color] [-pr2 color] [-bd color]
! [-pixmap file[;geom]] [-icon file] [-fn fontname] [-fb fontname]
! [-fi fontname] [-fbi fontname] [-/+is] [-im name] [-pt style]
! [-imlocale string] [-imfont fontname] [-name string] [-title string]
! [-n string] [-sl number] [-embed windowid] [-depth number] [-visual number]
! [-/+override-redirect] [-pty-fd fileno] [-/+hold] [-w number] [-b number]
! [-/+bl] [-lsp number] [-letsp number] [-/+sbg] [-mod modifier] [-/+ssc]
! [-/+ssr] [-pe string] [-e command arg ...]
!urxvt -help 
!Usage: urxvt [options] [-e command args]
!where options include:
!  -display string                 X server to contact
!  -tn string                      value of the TERM environment variable
!  -geometry geometry              size (in characters) and position
!  -C                              intercept console messages
!  -iconic                         start iconic
!  -cd string                      start shell in this directory
!  -dockapp                        start as dockapp
!  -/+rv                           turn on/off reverse video
!  -/+ls                           turn on/off login shell
!  -mc number                      maximum time (in ms) between multi-click selections
!  -/+j                            turn on/off jump scrolling
!  -/+ss                           turn on/off skip scrolling
!  -/+ptab                         turn on/off tab characters are pastable
!  -/+sb                           turn on/off scrollbar
!  -/+sr                           turn on/off scrollbar right
!  -/+st                           turn on/off scrollbar without a trough
!  -sbt number                     scrollbar thickness/width in pixels
!  -/+si                           turn on/off scroll-on-tty-output inhibit
!  -/+sk                           turn on/off scroll-on-keypress
!  -/+sw                           turn on/off scroll-with-buffer
!  -/+ip                           turn on/off inherit parent pixmap
!  -/+tr                           turn on/off inherit parent pixmap
!  -tint color                     tint color
!  -sh number                      shade background by number %.
!  -blr HxV                        gaussian blur radii to apply to the root background
!  -fade number                    fade colors by number % when losing focus
!  -fadecolor color                target color for off-focus fading
!  -/+ut                           turn on/off utmp inhibit
!  -/+vb                           turn on/off visual bell
!  -/+tcw                          turn on/off triple click word selection
!  -/+insecure                     turn on/off enable possibly insecure escape sequences
!  -/+uc                           turn on/off underline cursor
!  -/+bc                           turn on/off blinking cursor
!  -/+pb                           turn on/off switch off pointer after delay
!  -bg color                       background color
!  -fg color                       foreground color
!  -hc color                       highlight color
!  -cr color                       cursor color
!  -pr color                       pointer color
!  -pr2 color                      pointer bg color
!  -bd color                       border color
!  -pixmap file[;geom]             background pixmap
!  -icon file                      path to application icon image
!  -fn fontname                    normal text font
!  -fb fontname                    bold font
!  -fi fontname                    italic font
!  -fbi fontname                   bold italic font
!  -/+is                           turn on/off font styles imply intensity changes
!  -im name                        name of input method
!  -pt style                       input style: style = OverTheSpot|OffTheSpot|Root
!  -imlocale string                locale to use for input method
!  -imfont fontname                fontset for styles OverTheSpot and OffTheSpot
!  -name string                    client instance, icon, and title strings
!  -title string                   title name for window
!  -n string                       icon name for window
!  -sl number                      number of scrolled lines to save
!  -embed windowid                 window id to embed terminal in
!  -depth number                   depth of visual to request
!  -visual number                  visual id to request
!  -/+override-redirect            turn on/off set override-redirect on the terminal window
!  -pty-fd fileno                  file descriptor of pty to use
!  -/+hold                         turn on/off retain window after shell exit
!  -w number                       external border in pixels
!  -b number                       internal border in pixels
!  -/+bl                           turn on/off borderless window
!  -lsp number                     number of extra pixels between rows
!  -letsp number                   letter spacing adjustment
!  -/+sbg                          turn on/off do not use internal glyphs
!  -mod modifier                   meta modifier = alt|meta|hyper|super|mod1|...|mod5
!  -/+ssc                          turn on/off enable secondary screen
!  -/+ssr                          turn on/off enable secondary screen scroll
!  -pe string                      colon-separated list of perl extensions to enable for this instance
!  -e command arg ...              command to execute
!  -/+background-border            respect the terminal border (-pe background)
!  -background-expr string         background expression (-pe background)
!  -background-interval seconds    minimum time between updates (-pe background)
!  -bell-command string            the shell snippet to execute (-pe bell-command)
!  -font-size-step interger        font size increase/decrease step (-pe font-size)
!  -kuake-hotkey string            activation hotkey keysym (-pe kuake)
!  -matcher-button string          the mouse button used to activate a match (-pe matcher)
!  -matcher-launcher string        default launcher command (-pe matcher)
!  -matcher-launcher-... string    custom launcher for pattern (-pe matcher)
!  -matcher-pattern-... string     extra pattern to match (-pe matcher)
!  -matcher-rend-... string        custom rendition for pattern (-pe matcher)
!  -remote-clipboard-fetch string  the command used to fetch the selection (-pe remote-clipboard)
!  -remote-clipboard-store string  the command used to store the selection (-pe remote-clipboard)
!  -searchable-scrollback string   activation hotkey keysym (-pe searchable-scrollback)
!  -selection-autotransform-... string autotransform expression (-pe selection-autotransform)
!  -selection-pastebin-cmd string  the command to run create a new pastebin (-pe selection-pastebin)
!  -selection-pastebin-url string  the url template for new pastebins (-pe selection-pastebin)
!  -selection-pattern-0 string     first selection pattern (-pe selection)
!  -tab-bg colour                  tab background colour (-pe tabbed)
!  -tab-fg colour                  tab foreground colour (-pe tabbed)
!  -tabbar-bg colour               tab bar background colour (-pe tabbed)
!  -tabbar-fg colour               tab bar foreground colour (-pe tabbed)
!  -url-launcher string            shell command to use (-pe selection-popup)
!urxvt --help
!Usage: urxvt [options] [-e command args] where resources (long-options) include:
!  termName:                       string
!  geometry:                       geometry
!  chdir:                          string
!  reverseVideo:                   boolean
!  loginShell:                     boolean
!  multiClickTime:                 number
!  jumpScroll:                     boolean
!  skipScroll:                     boolean
!  pastableTabs:                   boolean
!  scrollstyle:                    mode
!  scrollBar:                      boolean
!  scrollBar_right:                boolean
!  scrollBar_floating:             boolean
!  scrollBar_align:                mode
!  thickness:                      number
!  scrollTtyOutput:                boolean
!  scrollTtyKeypress:              boolean
!  scrollWithBuffer:               boolean
!  inheritPixmap:                  boolean
!  transparent:                    boolean
!  tintColor:                      color
!  shading:                        number
!  blurRadius:                     HxV
!  fading:                         number
!  fadeColor:                      color
!  utmpInhibit:                    boolean
!  urgentOnBell:                   boolean
!  visualBell:                     boolean
!  mapAlert:                       boolean
!  meta8:                          boolean
!  mouseWheelScrollPage:           boolean
!  tripleclickwords:               boolean
!  insecure:                       boolean
!  cursorUnderline:                boolean
!  cursorBlink:                    boolean
!  pointerBlank:                   boolean
!  background:                     color
!  foreground:                     color
!  color0:                         color
!  color1:                         color
!  color2:                         color
!  color3:                         color
!  color4:                         color
!  color5:                         color
!  color6:                         color
!  color7:                         color
!  color8:                         color
!  color9:                         color
!  color10:                        color
!  color11:                        color
!  color12:                        color
!  color13:                        color
!  color14:                        color
!  color15:                        color
!  colorBD:                        color
!  colorIT:                        color
!  colorUL:                        color
!  colorRV:                        color
!  underlineColor:                 color
!  scrollColor:                    color
!  troughColor:                    color
!  highlightColor:                 color
!  highlightTextColor:             color
!  cursorColor:                    color
!  cursorColor2:                   color
!  pointerColor:                   color
!  pointerColor2:                  color
!  borderColor:                    color
!  path:                           search path
!  backgroundPixmap:               file[;geom]
!  iconFile:                       file
!  font:                           fontname
!  boldFont:                       fontname
!  italicFont:                     fontname
!  boldItalicFont:                 fontname
!  intensityStyles:                boolean
!  inputMethod:                    name
!  preeditType:                    style
!  imLocale:                       string
!  imFont:                         fontname
!  title:                          string
!  iconName:                       string
!  saveLines:                      number
!  buffered:                       boolean
!  depth:                          number
!  visual:                         number
!  transient-for:                  windowid
!  override-redirect:              boolean
!  hold:                           boolean
!  externalBorder:                 number
!  internalBorder:                 number
!  borderLess:                     boolean
!  lineSpace:                      number
!  letterSpace:                    number
!  skipBuiltinGlyphs:              boolean
!  pointerBlankDelay:              number
!  backspacekey:                   string
!  deletekey:                      string
!  print-pipe:                     string
!  modifier:                       modifier
!  cutchars:                       string
!  answerbackString:               string
!  secondaryScreen:                boolean
!  secondaryScroll:                boolean
!  perl-lib:                       string
!  perl-eval:                      perl-eval
!  perl-ext-common:                string
!  perl-ext:                       string
!  iso14755:                       boolean
!  iso14755_52:                    boolean
!  xrm:                            string
!  keysym.sym:                     keysym
!  background.border:              boolean
!  background.expr:                string
!  background.interval:            seconds
!  bell-command:                   string
!  font-size.step:                 interger
!  kuake.hotkey:                   string
!  matcher.button:                 string
!  matcher.launcher:               string
!  matcher.launcher.*:             string
!  matcher.pattern.*:              string
!  matcher.rend.*:                 string
!  remote-clipboard.fetch:         string
!  remote-clipboard.store:         string
!  searchable-scrollback:          string
!  selection-autotransform.*:      string
!  selection-pastebin.cmd:         string
!  selection-pastebin.url:         string
!  selection.pattern-0:            string
!  tab-bg:                         colour
!  tab-fg:                         colour
!  tabbar-bg:                      colour
!  tabbar-fg:                      colour
!  url-launcher:                   string

! =lxterm is sh script ckng locale thN wrapping uxterm, but =lxterminal is a separ8 binary XeQtabl && uxterm does!sEm2 accept a geometry resource here(VT100)?
! tried UXTerm*VT100.geometry, UXTerm.textWidth, && UXTerm.termWidth (&& Height) && had "x:fixed," B4 Hack but got too many fonts for fNorm warning, so rmvd;
!UXTerm*VT100.geometry:          160x50
UXTerm.termWidth:               160
UXTerm.termHeight:                  50
UXTerm*faceName:                Hack:size=8:antialias=true

XClock*Foreground:              black
XClock*Background:              light grey
XClock*Border:                  navy blue
XClock*Highlight:               cornflower blue
XClock*Hands:                   slate blue
XClock*Mode:                    analog
!XClock*analog:                  1
XClock*update:                  1

XCursor.size:                   24
XCursor.theme:                  DMZ-Black

! Maybe these originally came from some fonts.conf but attempting`xrdb -remove .Xrc`to just pull xterm entries out again removed everything so this to restore:
*customization:                 -color
XFt.antiAlias:                  1
XFt.dpi:                        144
XFt.hinting:                    1
XFt.hintStyle:                  hintslight
XFt.rgba:                       rgb