forked from torvalds/linux
/
drm_mipi_dbi.c
1305 lines (1112 loc) · 32.4 KB
/
drm_mipi_dbi.c
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
137
138
139
140
141
142
143
144
145
146
147
148
149
150
151
152
153
154
155
156
157
158
159
160
161
162
163
164
165
166
167
168
169
170
171
172
173
174
175
176
177
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
241
242
243
244
245
246
247
248
249
250
251
252
253
254
255
256
257
258
259
260
261
262
263
264
265
266
267
268
269
270
271
272
273
274
275
276
277
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
294
295
296
297
298
299
300
301
302
303
304
305
306
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
398
399
400
401
402
403
404
405
406
407
408
409
410
411
412
413
414
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
445
446
447
448
449
450
451
452
453
454
455
456
457
458
459
460
461
462
463
464
465
466
467
468
469
470
471
472
473
474
475
476
477
478
479
480
481
482
483
484
485
486
487
488
489
490
491
492
493
494
495
496
497
498
499
500
501
502
503
504
505
506
507
508
509
510
511
512
513
514
515
516
517
518
519
520
521
522
523
524
525
526
527
528
529
530
531
532
533
534
535
536
537
538
539
540
541
542
543
544
545
546
547
548
549
550
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
578
579
580
581
582
583
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
701
702
703
704
705
706
707
708
709
710
711
712
713
714
715
716
717
718
719
720
721
722
723
724
725
726
727
728
729
730
731
732
733
734
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
775
776
777
778
779
780
781
782
783
784
785
786
787
788
789
790
791
792
793
794
795
796
797
798
799
800
801
802
803
804
805
806
807
808
809
810
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
837
838
839
840
841
842
843
844
845
846
847
848
849
850
851
852
853
854
855
856
857
858
859
860
861
862
863
864
865
866
867
868
869
870
871
872
873
874
875
876
877
878
879
880
881
882
883
884
885
886
887
888
889
890
891
892
893
894
895
896
897
898
899
900
901
902
903
904
905
906
907
908
909
910
911
912
913
914
915
916
917
918
919
920
921
922
923
924
925
926
927
928
929
930
931
932
933
934
935
936
937
938
939
940
941
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
989
990
991
992
993
994
995
996
997
998
999
1000
// SPDX-License-Identifier: GPL-2.0-or-later
/*
* MIPI Display Bus Interface (DBI) LCD controller support
*
* Copyright 2016 Noralf Trønnes
*/
#include <linux/debugfs.h>
#include <linux/delay.h>
#include <linux/dma-buf.h>
#include <linux/gpio/consumer.h>
#include <linux/module.h>
#include <linux/regulator/consumer.h>
#include <linux/spi/spi.h>
#include <drm/drm_connector.h>
#include <drm/drm_damage_helper.h>
#include <drm/drm_drv.h>
#include <drm/drm_gem_cma_helper.h>
#include <drm/drm_format_helper.h>
#include <drm/drm_fourcc.h>
#include <drm/drm_gem_framebuffer_helper.h>
#include <drm/drm_mipi_dbi.h>
#include <drm/drm_modes.h>
#include <drm/drm_probe_helper.h>
#include <drm/drm_rect.h>
#include <video/mipi_display.h>
#define MIPI_DBI_MAX_SPI_READ_SPEED 2000000 /* 2MHz */
#define DCS_POWER_MODE_DISPLAY BIT(2)
#define DCS_POWER_MODE_DISPLAY_NORMAL_MODE BIT(3)
#define DCS_POWER_MODE_SLEEP_MODE BIT(4)
#define DCS_POWER_MODE_PARTIAL_MODE BIT(5)
#define DCS_POWER_MODE_IDLE_MODE BIT(6)
#define DCS_POWER_MODE_RESERVED_MASK (BIT(0) | BIT(1) | BIT(7))
/**
* DOC: overview
*
* This library provides helpers for MIPI Display Bus Interface (DBI)
* compatible display controllers.
*
* Many controllers for tiny lcd displays are MIPI compliant and can use this
* library. If a controller uses registers 0x2A and 0x2B to set the area to
* update and uses register 0x2C to write to frame memory, it is most likely
* MIPI compliant.
*
* Only MIPI Type 1 displays are supported since a full frame memory is needed.
*
* There are 3 MIPI DBI implementation types:
*
* A. Motorola 6800 type parallel bus
*
* B. Intel 8080 type parallel bus
*
* C. SPI type with 3 options:
*
* 1. 9-bit with the Data/Command signal as the ninth bit
* 2. Same as above except it's sent as 16 bits
* 3. 8-bit with the Data/Command signal as a separate D/CX pin
*
* Currently mipi_dbi only supports Type C options 1 and 3 with
* mipi_dbi_spi_init().
*/
#define MIPI_DBI_DEBUG_COMMAND(cmd, data, len) \
({ \
if (!len) \
DRM_DEBUG_DRIVER("cmd=%02x\n", cmd); \
else if (len <= 32) \
DRM_DEBUG_DRIVER("cmd=%02x, par=%*ph\n", cmd, (int)len, data);\
else \
DRM_DEBUG_DRIVER("cmd=%02x, len=%zu\n", cmd, len); \
})
static const u8 mipi_dbi_dcs_read_commands[] = {
MIPI_DCS_GET_DISPLAY_ID,
MIPI_DCS_GET_RED_CHANNEL,
MIPI_DCS_GET_GREEN_CHANNEL,
MIPI_DCS_GET_BLUE_CHANNEL,
MIPI_DCS_GET_DISPLAY_STATUS,
MIPI_DCS_GET_POWER_MODE,
MIPI_DCS_GET_ADDRESS_MODE,
MIPI_DCS_GET_PIXEL_FORMAT,
MIPI_DCS_GET_DISPLAY_MODE,
MIPI_DCS_GET_SIGNAL_MODE,
MIPI_DCS_GET_DIAGNOSTIC_RESULT,
MIPI_DCS_READ_MEMORY_START,
MIPI_DCS_READ_MEMORY_CONTINUE,
MIPI_DCS_GET_SCANLINE,
MIPI_DCS_GET_DISPLAY_BRIGHTNESS,
MIPI_DCS_GET_CONTROL_DISPLAY,
MIPI_DCS_GET_POWER_SAVE,
MIPI_DCS_GET_CABC_MIN_BRIGHTNESS,
MIPI_DCS_READ_DDB_START,
MIPI_DCS_READ_DDB_CONTINUE,
0, /* sentinel */
};
static bool mipi_dbi_command_is_read(struct mipi_dbi *dbi, u8 cmd)
{
unsigned int i;
if (!dbi->read_commands)
return false;
for (i = 0; i < 0xff; i++) {
if (!dbi->read_commands[i])
return false;
if (cmd == dbi->read_commands[i])
return true;
}
return false;
}
/**
* mipi_dbi_command_read - MIPI DCS read command
* @dbi: MIPI DBI structure
* @cmd: Command
* @val: Value read
*
* Send MIPI DCS read command to the controller.
*
* Returns:
* Zero on success, negative error code on failure.
*/
int mipi_dbi_command_read(struct mipi_dbi *dbi, u8 cmd, u8 *val)
{
if (!dbi->read_commands)
return -EACCES;
if (!mipi_dbi_command_is_read(dbi, cmd))
return -EINVAL;
return mipi_dbi_command_buf(dbi, cmd, val, 1);
}
EXPORT_SYMBOL(mipi_dbi_command_read);
/**
* mipi_dbi_command_buf - MIPI DCS command with parameter(s) in an array
* @dbi: MIPI DBI structure
* @cmd: Command
* @data: Parameter buffer
* @len: Buffer length
*
* Returns:
* Zero on success, negative error code on failure.
*/
int mipi_dbi_command_buf(struct mipi_dbi *dbi, u8 cmd, u8 *data, size_t len)
{
u8 *cmdbuf;
int ret;
/* SPI requires dma-safe buffers */
cmdbuf = kmemdup(&cmd, 1, GFP_KERNEL);
if (!cmdbuf)
return -ENOMEM;
mutex_lock(&dbi->cmdlock);
ret = dbi->command(dbi, cmdbuf, data, len);
mutex_unlock(&dbi->cmdlock);
kfree(cmdbuf);
return ret;
}
EXPORT_SYMBOL(mipi_dbi_command_buf);
/* This should only be used by mipi_dbi_command() */
int mipi_dbi_command_stackbuf(struct mipi_dbi *dbi, u8 cmd, const u8 *data,
size_t len)
{
u8 *buf;
int ret;
buf = kmemdup(data, len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
ret = mipi_dbi_command_buf(dbi, cmd, buf, len);
kfree(buf);
return ret;
}
EXPORT_SYMBOL(mipi_dbi_command_stackbuf);
/**
* mipi_dbi_buf_copy - Copy a framebuffer, transforming it if necessary
* @dst: The destination buffer
* @fb: The source framebuffer
* @clip: Clipping rectangle of the area to be copied
* @swap: When true, swap MSB/LSB of 16-bit values
*
* Returns:
* Zero on success, negative error code on failure.
*/
int mipi_dbi_buf_copy(void *dst, struct drm_framebuffer *fb,
struct drm_rect *clip, bool swap)
{
struct drm_gem_object *gem = drm_gem_fb_get_obj(fb, 0);
struct drm_gem_cma_object *cma_obj = to_drm_gem_cma_obj(gem);
struct dma_buf_attachment *import_attach = gem->import_attach;
void *src = cma_obj->vaddr;
int ret = 0;
if (import_attach) {
ret = dma_buf_begin_cpu_access(import_attach->dmabuf,
DMA_FROM_DEVICE);
if (ret)
return ret;
}
switch (fb->format->format) {
case DRM_FORMAT_RGB565:
if (swap)
drm_fb_swab(dst, src, fb, clip, !import_attach);
else
drm_fb_memcpy(dst, src, fb, clip);
break;
case DRM_FORMAT_XRGB8888:
drm_fb_xrgb8888_to_rgb565(dst, src, fb, clip, swap);
break;
default:
drm_err_once(fb->dev, "Format is not supported: %p4cc\n",
&fb->format->format);
return -EINVAL;
}
if (import_attach)
ret = dma_buf_end_cpu_access(import_attach->dmabuf,
DMA_FROM_DEVICE);
return ret;
}
EXPORT_SYMBOL(mipi_dbi_buf_copy);
static void mipi_dbi_set_window_address(struct mipi_dbi_dev *dbidev,
unsigned int xs, unsigned int xe,
unsigned int ys, unsigned int ye)
{
struct mipi_dbi *dbi = &dbidev->dbi;
xs += dbidev->left_offset;
xe += dbidev->left_offset;
ys += dbidev->top_offset;
ye += dbidev->top_offset;
mipi_dbi_command(dbi, MIPI_DCS_SET_COLUMN_ADDRESS, (xs >> 8) & 0xff,
xs & 0xff, (xe >> 8) & 0xff, xe & 0xff);
mipi_dbi_command(dbi, MIPI_DCS_SET_PAGE_ADDRESS, (ys >> 8) & 0xff,
ys & 0xff, (ye >> 8) & 0xff, ye & 0xff);
}
static void mipi_dbi_fb_dirty(struct drm_framebuffer *fb, struct drm_rect *rect)
{
struct drm_gem_object *gem = drm_gem_fb_get_obj(fb, 0);
struct drm_gem_cma_object *cma_obj = to_drm_gem_cma_obj(gem);
struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(fb->dev);
unsigned int height = rect->y2 - rect->y1;
unsigned int width = rect->x2 - rect->x1;
struct mipi_dbi *dbi = &dbidev->dbi;
bool swap = dbi->swap_bytes;
int idx, ret = 0;
bool full;
void *tr;
if (WARN_ON(!fb))
return;
if (!drm_dev_enter(fb->dev, &idx))
return;
full = width == fb->width && height == fb->height;
DRM_DEBUG_KMS("Flushing [FB:%d] " DRM_RECT_FMT "\n", fb->base.id, DRM_RECT_ARG(rect));
if (!dbi->dc || !full || swap ||
fb->format->format == DRM_FORMAT_XRGB8888) {
tr = dbidev->tx_buf;
ret = mipi_dbi_buf_copy(dbidev->tx_buf, fb, rect, swap);
if (ret)
goto err_msg;
} else {
tr = cma_obj->vaddr;
}
mipi_dbi_set_window_address(dbidev, rect->x1, rect->x2 - 1, rect->y1,
rect->y2 - 1);
ret = mipi_dbi_command_buf(dbi, MIPI_DCS_WRITE_MEMORY_START, tr,
width * height * 2);
err_msg:
if (ret)
drm_err_once(fb->dev, "Failed to update display %d\n", ret);
drm_dev_exit(idx);
}
/**
* mipi_dbi_pipe_update - Display pipe update helper
* @pipe: Simple display pipe
* @old_state: Old plane state
*
* This function handles framebuffer flushing and vblank events. Drivers can use
* this as their &drm_simple_display_pipe_funcs->update callback.
*/
void mipi_dbi_pipe_update(struct drm_simple_display_pipe *pipe,
struct drm_plane_state *old_state)
{
struct drm_plane_state *state = pipe->plane.state;
struct drm_rect rect;
if (!pipe->crtc.state->active)
return;
if (drm_atomic_helper_damage_merged(old_state, state, &rect))
mipi_dbi_fb_dirty(state->fb, &rect);
}
EXPORT_SYMBOL(mipi_dbi_pipe_update);
/**
* mipi_dbi_enable_flush - MIPI DBI enable helper
* @dbidev: MIPI DBI device structure
* @crtc_state: CRTC state
* @plane_state: Plane state
*
* Flushes the whole framebuffer and enables the backlight. Drivers can use this
* in their &drm_simple_display_pipe_funcs->enable callback.
*
* Note: Drivers which don't use mipi_dbi_pipe_update() because they have custom
* framebuffer flushing, can't use this function since they both use the same
* flushing code.
*/
void mipi_dbi_enable_flush(struct mipi_dbi_dev *dbidev,
struct drm_crtc_state *crtc_state,
struct drm_plane_state *plane_state)
{
struct drm_framebuffer *fb = plane_state->fb;
struct drm_rect rect = {
.x1 = 0,
.x2 = fb->width,
.y1 = 0,
.y2 = fb->height,
};
int idx;
if (!drm_dev_enter(&dbidev->drm, &idx))
return;
mipi_dbi_fb_dirty(fb, &rect);
backlight_enable(dbidev->backlight);
drm_dev_exit(idx);
}
EXPORT_SYMBOL(mipi_dbi_enable_flush);
static void mipi_dbi_blank(struct mipi_dbi_dev *dbidev)
{
struct drm_device *drm = &dbidev->drm;
u16 height = drm->mode_config.min_height;
u16 width = drm->mode_config.min_width;
struct mipi_dbi *dbi = &dbidev->dbi;
size_t len = width * height * 2;
int idx;
if (!drm_dev_enter(drm, &idx))
return;
memset(dbidev->tx_buf, 0, len);
mipi_dbi_set_window_address(dbidev, 0, width - 1, 0, height - 1);
mipi_dbi_command_buf(dbi, MIPI_DCS_WRITE_MEMORY_START,
(u8 *)dbidev->tx_buf, len);
drm_dev_exit(idx);
}
/**
* mipi_dbi_pipe_disable - MIPI DBI pipe disable helper
* @pipe: Display pipe
*
* This function disables backlight if present, if not the display memory is
* blanked. The regulator is disabled if in use. Drivers can use this as their
* &drm_simple_display_pipe_funcs->disable callback.
*/
void mipi_dbi_pipe_disable(struct drm_simple_display_pipe *pipe)
{
struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(pipe->crtc.dev);
DRM_DEBUG_KMS("\n");
if (dbidev->backlight)
backlight_disable(dbidev->backlight);
else
mipi_dbi_blank(dbidev);
if (dbidev->regulator)
regulator_disable(dbidev->regulator);
}
EXPORT_SYMBOL(mipi_dbi_pipe_disable);
static int mipi_dbi_connector_get_modes(struct drm_connector *connector)
{
struct mipi_dbi_dev *dbidev = drm_to_mipi_dbi_dev(connector->dev);
struct drm_display_mode *mode;
mode = drm_mode_duplicate(connector->dev, &dbidev->mode);
if (!mode) {
DRM_ERROR("Failed to duplicate mode\n");
return 0;
}
if (mode->name[0] == '\0')
drm_mode_set_name(mode);
mode->type |= DRM_MODE_TYPE_PREFERRED;
drm_mode_probed_add(connector, mode);
if (mode->width_mm) {
connector->display_info.width_mm = mode->width_mm;
connector->display_info.height_mm = mode->height_mm;
}
return 1;
}
static const struct drm_connector_helper_funcs mipi_dbi_connector_hfuncs = {
.get_modes = mipi_dbi_connector_get_modes,
};
static const struct drm_connector_funcs mipi_dbi_connector_funcs = {
.reset = drm_atomic_helper_connector_reset,
.fill_modes = drm_helper_probe_single_connector_modes,
.destroy = drm_connector_cleanup,
.atomic_duplicate_state = drm_atomic_helper_connector_duplicate_state,
.atomic_destroy_state = drm_atomic_helper_connector_destroy_state,
};
static int mipi_dbi_rotate_mode(struct drm_display_mode *mode,
unsigned int rotation)
{
if (rotation == 0 || rotation == 180) {
return 0;
} else if (rotation == 90 || rotation == 270) {
swap(mode->hdisplay, mode->vdisplay);
swap(mode->hsync_start, mode->vsync_start);
swap(mode->hsync_end, mode->vsync_end);
swap(mode->htotal, mode->vtotal);
swap(mode->width_mm, mode->height_mm);
return 0;
} else {
return -EINVAL;
}
}
static const struct drm_mode_config_funcs mipi_dbi_mode_config_funcs = {
.fb_create = drm_gem_fb_create_with_dirty,
.atomic_check = drm_atomic_helper_check,
.atomic_commit = drm_atomic_helper_commit,
};
static const uint32_t mipi_dbi_formats[] = {
DRM_FORMAT_RGB565,
DRM_FORMAT_XRGB8888,
};
/**
* mipi_dbi_dev_init_with_formats - MIPI DBI device initialization with custom formats
* @dbidev: MIPI DBI device structure to initialize
* @funcs: Display pipe functions
* @formats: Array of supported formats (DRM_FORMAT\_\*).
* @format_count: Number of elements in @formats
* @mode: Display mode
* @rotation: Initial rotation in degrees Counter Clock Wise
* @tx_buf_size: Allocate a transmit buffer of this size.
*
* This function sets up a &drm_simple_display_pipe with a &drm_connector that
* has one fixed &drm_display_mode which is rotated according to @rotation.
* This mode is used to set the mode config min/max width/height properties.
*
* Use mipi_dbi_dev_init() if you don't need custom formats.
*
* Note:
* Some of the helper functions expects RGB565 to be the default format and the
* transmit buffer sized to fit that.
*
* Returns:
* Zero on success, negative error code on failure.
*/
int mipi_dbi_dev_init_with_formats(struct mipi_dbi_dev *dbidev,
const struct drm_simple_display_pipe_funcs *funcs,
const uint32_t *formats, unsigned int format_count,
const struct drm_display_mode *mode,
unsigned int rotation, size_t tx_buf_size)
{
static const uint64_t modifiers[] = {
DRM_FORMAT_MOD_LINEAR,
DRM_FORMAT_MOD_INVALID
};
struct drm_device *drm = &dbidev->drm;
int ret;
if (!dbidev->dbi.command)
return -EINVAL;
ret = drmm_mode_config_init(drm);
if (ret)
return ret;
dbidev->tx_buf = devm_kmalloc(drm->dev, tx_buf_size, GFP_KERNEL);
if (!dbidev->tx_buf)
return -ENOMEM;
drm_mode_copy(&dbidev->mode, mode);
ret = mipi_dbi_rotate_mode(&dbidev->mode, rotation);
if (ret) {
DRM_ERROR("Illegal rotation value %u\n", rotation);
return -EINVAL;
}
drm_connector_helper_add(&dbidev->connector, &mipi_dbi_connector_hfuncs);
ret = drm_connector_init(drm, &dbidev->connector, &mipi_dbi_connector_funcs,
DRM_MODE_CONNECTOR_SPI);
if (ret)
return ret;
ret = drm_simple_display_pipe_init(drm, &dbidev->pipe, funcs, formats, format_count,
modifiers, &dbidev->connector);
if (ret)
return ret;
drm_plane_enable_fb_damage_clips(&dbidev->pipe.plane);
drm->mode_config.funcs = &mipi_dbi_mode_config_funcs;
drm->mode_config.min_width = dbidev->mode.hdisplay;
drm->mode_config.max_width = dbidev->mode.hdisplay;
drm->mode_config.min_height = dbidev->mode.vdisplay;
drm->mode_config.max_height = dbidev->mode.vdisplay;
dbidev->rotation = rotation;
DRM_DEBUG_KMS("rotation = %u\n", rotation);
return 0;
}
EXPORT_SYMBOL(mipi_dbi_dev_init_with_formats);
/**
* mipi_dbi_dev_init - MIPI DBI device initialization
* @dbidev: MIPI DBI device structure to initialize
* @funcs: Display pipe functions
* @mode: Display mode
* @rotation: Initial rotation in degrees Counter Clock Wise
*
* This function sets up a &drm_simple_display_pipe with a &drm_connector that
* has one fixed &drm_display_mode which is rotated according to @rotation.
* This mode is used to set the mode config min/max width/height properties.
* Additionally &mipi_dbi.tx_buf is allocated.
*
* Supported formats: Native RGB565 and emulated XRGB8888.
*
* Returns:
* Zero on success, negative error code on failure.
*/
int mipi_dbi_dev_init(struct mipi_dbi_dev *dbidev,
const struct drm_simple_display_pipe_funcs *funcs,
const struct drm_display_mode *mode, unsigned int rotation)
{
size_t bufsize = mode->vdisplay * mode->hdisplay * sizeof(u16);
dbidev->drm.mode_config.preferred_depth = 16;
return mipi_dbi_dev_init_with_formats(dbidev, funcs, mipi_dbi_formats,
ARRAY_SIZE(mipi_dbi_formats), mode,
rotation, bufsize);
}
EXPORT_SYMBOL(mipi_dbi_dev_init);
/**
* mipi_dbi_hw_reset - Hardware reset of controller
* @dbi: MIPI DBI structure
*
* Reset controller if the &mipi_dbi->reset gpio is set.
*/
void mipi_dbi_hw_reset(struct mipi_dbi *dbi)
{
if (!dbi->reset)
return;
gpiod_set_value_cansleep(dbi->reset, 0);
usleep_range(20, 1000);
gpiod_set_value_cansleep(dbi->reset, 1);
msleep(120);
}
EXPORT_SYMBOL(mipi_dbi_hw_reset);
/**
* mipi_dbi_display_is_on - Check if display is on
* @dbi: MIPI DBI structure
*
* This function checks the Power Mode register (if readable) to see if
* display output is turned on. This can be used to see if the bootloader
* has already turned on the display avoiding flicker when the pipeline is
* enabled.
*
* Returns:
* true if the display can be verified to be on, false otherwise.
*/
bool mipi_dbi_display_is_on(struct mipi_dbi *dbi)
{
u8 val;
if (mipi_dbi_command_read(dbi, MIPI_DCS_GET_POWER_MODE, &val))
return false;
val &= ~DCS_POWER_MODE_RESERVED_MASK;
/* The poweron/reset value is 08h DCS_POWER_MODE_DISPLAY_NORMAL_MODE */
if (val != (DCS_POWER_MODE_DISPLAY |
DCS_POWER_MODE_DISPLAY_NORMAL_MODE | DCS_POWER_MODE_SLEEP_MODE))
return false;
DRM_DEBUG_DRIVER("Display is ON\n");
return true;
}
EXPORT_SYMBOL(mipi_dbi_display_is_on);
static int mipi_dbi_poweron_reset_conditional(struct mipi_dbi_dev *dbidev, bool cond)
{
struct device *dev = dbidev->drm.dev;
struct mipi_dbi *dbi = &dbidev->dbi;
int ret;
if (dbidev->regulator) {
ret = regulator_enable(dbidev->regulator);
if (ret) {
DRM_DEV_ERROR(dev, "Failed to enable regulator (%d)\n", ret);
return ret;
}
}
if (cond && mipi_dbi_display_is_on(dbi))
return 1;
mipi_dbi_hw_reset(dbi);
ret = mipi_dbi_command_buf(dbi, MIPI_DCS_SOFT_RESET, NULL, 0);
if (ret) {
DRM_DEV_ERROR(dev, "Failed to send reset command (%d)\n", ret);
if (dbidev->regulator)
regulator_disable(dbidev->regulator);
return ret;
}
/*
* If we did a hw reset, we know the controller is in Sleep mode and
* per MIPI DSC spec should wait 5ms after soft reset. If we didn't,
* we assume worst case and wait 120ms.
*/
if (dbi->reset)
usleep_range(5000, 20000);
else
msleep(120);
return 0;
}
/**
* mipi_dbi_poweron_reset - MIPI DBI poweron and reset
* @dbidev: MIPI DBI device structure
*
* This function enables the regulator if used and does a hardware and software
* reset.
*
* Returns:
* Zero on success, or a negative error code.
*/
int mipi_dbi_poweron_reset(struct mipi_dbi_dev *dbidev)
{
return mipi_dbi_poweron_reset_conditional(dbidev, false);
}
EXPORT_SYMBOL(mipi_dbi_poweron_reset);
/**
* mipi_dbi_poweron_conditional_reset - MIPI DBI poweron and conditional reset
* @dbidev: MIPI DBI device structure
*
* This function enables the regulator if used and if the display is off, it
* does a hardware and software reset. If mipi_dbi_display_is_on() determines
* that the display is on, no reset is performed.
*
* Returns:
* Zero if the controller was reset, 1 if the display was already on, or a
* negative error code.
*/
int mipi_dbi_poweron_conditional_reset(struct mipi_dbi_dev *dbidev)
{
return mipi_dbi_poweron_reset_conditional(dbidev, true);
}
EXPORT_SYMBOL(mipi_dbi_poweron_conditional_reset);
#if IS_ENABLED(CONFIG_SPI)
/**
* mipi_dbi_spi_cmd_max_speed - get the maximum SPI bus speed
* @spi: SPI device
* @len: The transfer buffer length.
*
* Many controllers have a max speed of 10MHz, but can be pushed way beyond
* that. Increase reliability by running pixel data at max speed and the rest
* at 10MHz, preventing transfer glitches from messing up the init settings.
*/
u32 mipi_dbi_spi_cmd_max_speed(struct spi_device *spi, size_t len)
{
if (len > 64)
return 0; /* use default */
return min_t(u32, 10000000, spi->max_speed_hz);
}
EXPORT_SYMBOL(mipi_dbi_spi_cmd_max_speed);
static bool mipi_dbi_machine_little_endian(void)
{
#if defined(__LITTLE_ENDIAN)
return true;
#else
return false;
#endif
}
/*
* MIPI DBI Type C Option 1
*
* If the SPI controller doesn't have 9 bits per word support,
* use blocks of 9 bytes to send 8x 9-bit words using a 8-bit SPI transfer.
* Pad partial blocks with MIPI_DCS_NOP (zero).
* This is how the D/C bit (x) is added:
* x7654321
* 0x765432
* 10x76543
* 210x7654
* 3210x765
* 43210x76
* 543210x7
* 6543210x
* 76543210
*/
static int mipi_dbi_spi1e_transfer(struct mipi_dbi *dbi, int dc,
const void *buf, size_t len,
unsigned int bpw)
{
bool swap_bytes = (bpw == 16 && mipi_dbi_machine_little_endian());
size_t chunk, max_chunk = dbi->tx_buf9_len;
struct spi_device *spi = dbi->spi;
struct spi_transfer tr = {
.tx_buf = dbi->tx_buf9,
.bits_per_word = 8,
};
struct spi_message m;
const u8 *src = buf;
int i, ret;
u8 *dst;
if (drm_debug_enabled(DRM_UT_DRIVER))
pr_debug("[drm:%s] dc=%d, max_chunk=%zu, transfers:\n",
__func__, dc, max_chunk);
tr.speed_hz = mipi_dbi_spi_cmd_max_speed(spi, len);
spi_message_init_with_transfers(&m, &tr, 1);
if (!dc) {
if (WARN_ON_ONCE(len != 1))
return -EINVAL;
/* Command: pad no-op's (zeroes) at beginning of block */
dst = dbi->tx_buf9;
memset(dst, 0, 9);
dst[8] = *src;
tr.len = 9;
return spi_sync(spi, &m);
}
/* max with room for adding one bit per byte */
max_chunk = max_chunk / 9 * 8;
/* but no bigger than len */
max_chunk = min(max_chunk, len);
/* 8 byte blocks */
max_chunk = max_t(size_t, 8, max_chunk & ~0x7);
while (len) {
size_t added = 0;
chunk = min(len, max_chunk);
len -= chunk;
dst = dbi->tx_buf9;
if (chunk < 8) {
u8 val, carry = 0;
/* Data: pad no-op's (zeroes) at end of block */
memset(dst, 0, 9);
if (swap_bytes) {
for (i = 1; i < (chunk + 1); i++) {
val = src[1];
*dst++ = carry | BIT(8 - i) | (val >> i);
carry = val << (8 - i);
i++;
val = src[0];
*dst++ = carry | BIT(8 - i) | (val >> i);
carry = val << (8 - i);
src += 2;
}
*dst++ = carry;
} else {
for (i = 1; i < (chunk + 1); i++) {
val = *src++;
*dst++ = carry | BIT(8 - i) | (val >> i);
carry = val << (8 - i);
}
*dst++ = carry;
}
chunk = 8;
added = 1;
} else {
for (i = 0; i < chunk; i += 8) {
if (swap_bytes) {
*dst++ = BIT(7) | (src[1] >> 1);
*dst++ = (src[1] << 7) | BIT(6) | (src[0] >> 2);
*dst++ = (src[0] << 6) | BIT(5) | (src[3] >> 3);
*dst++ = (src[3] << 5) | BIT(4) | (src[2] >> 4);
*dst++ = (src[2] << 4) | BIT(3) | (src[5] >> 5);
*dst++ = (src[5] << 3) | BIT(2) | (src[4] >> 6);
*dst++ = (src[4] << 2) | BIT(1) | (src[7] >> 7);
*dst++ = (src[7] << 1) | BIT(0);
*dst++ = src[6];
} else {
*dst++ = BIT(7) | (src[0] >> 1);
*dst++ = (src[0] << 7) | BIT(6) | (src[1] >> 2);
*dst++ = (src[1] << 6) | BIT(5) | (src[2] >> 3);
*dst++ = (src[2] << 5) | BIT(4) | (src[3] >> 4);
*dst++ = (src[3] << 4) | BIT(3) | (src[4] >> 5);
*dst++ = (src[4] << 3) | BIT(2) | (src[5] >> 6);
*dst++ = (src[5] << 2) | BIT(1) | (src[6] >> 7);
*dst++ = (src[6] << 1) | BIT(0);
*dst++ = src[7];
}
src += 8;
added++;
}
}
tr.len = chunk + added;
ret = spi_sync(spi, &m);
if (ret)
return ret;
}
return 0;
}
static int mipi_dbi_spi1_transfer(struct mipi_dbi *dbi, int dc,
const void *buf, size_t len,
unsigned int bpw)
{
struct spi_device *spi = dbi->spi;
struct spi_transfer tr = {
.bits_per_word = 9,
};
const u16 *src16 = buf;
const u8 *src8 = buf;
struct spi_message m;
size_t max_chunk;
u16 *dst16;
int ret;
if (!spi_is_bpw_supported(spi, 9))
return mipi_dbi_spi1e_transfer(dbi, dc, buf, len, bpw);
tr.speed_hz = mipi_dbi_spi_cmd_max_speed(spi, len);
max_chunk = dbi->tx_buf9_len;
dst16 = dbi->tx_buf9;
if (drm_debug_enabled(DRM_UT_DRIVER))
pr_debug("[drm:%s] dc=%d, max_chunk=%zu, transfers:\n",
__func__, dc, max_chunk);
max_chunk = min(max_chunk / 2, len);
spi_message_init_with_transfers(&m, &tr, 1);
tr.tx_buf = dst16;
while (len) {
size_t chunk = min(len, max_chunk);
unsigned int i;
if (bpw == 16 && mipi_dbi_machine_little_endian()) {
for (i = 0; i < (chunk * 2); i += 2) {
dst16[i] = *src16 >> 8;
dst16[i + 1] = *src16++ & 0xFF;
if (dc) {
dst16[i] |= 0x0100;
dst16[i + 1] |= 0x0100;
}
}
} else {
for (i = 0; i < chunk; i++) {
dst16[i] = *src8++;
if (dc)
dst16[i] |= 0x0100;
}
}
tr.len = chunk * 2;
len -= chunk;
ret = spi_sync(spi, &m);
if (ret)
return ret;
}
return 0;
}
static int mipi_dbi_typec1_command(struct mipi_dbi *dbi, u8 *cmd,
u8 *parameters, size_t num)
{
unsigned int bpw = (*cmd == MIPI_DCS_WRITE_MEMORY_START) ? 16 : 8;
int ret;
if (mipi_dbi_command_is_read(dbi, *cmd))
return -EOPNOTSUPP;
MIPI_DBI_DEBUG_COMMAND(*cmd, parameters, num);
ret = mipi_dbi_spi1_transfer(dbi, 0, cmd, 1, 8);
if (ret || !num)
return ret;
return mipi_dbi_spi1_transfer(dbi, 1, parameters, num, bpw);
}
/* MIPI DBI Type C Option 3 */
static int mipi_dbi_typec3_command_read(struct mipi_dbi *dbi, u8 *cmd,
u8 *data, size_t len)
{
struct spi_device *spi = dbi->spi;
u32 speed_hz = min_t(u32, MIPI_DBI_MAX_SPI_READ_SPEED,
spi->max_speed_hz / 2);
struct spi_transfer tr[2] = {
{
.speed_hz = speed_hz,
.tx_buf = cmd,
.len = 1,
}, {
.speed_hz = speed_hz,
.len = len,
},
};
struct spi_message m;
u8 *buf;
int ret;
if (!len)
return -EINVAL;
/*
* Support non-standard 24-bit and 32-bit Nokia read commands which
* start with a dummy clock, so we need to read an extra byte.
*/
if (*cmd == MIPI_DCS_GET_DISPLAY_ID ||
*cmd == MIPI_DCS_GET_DISPLAY_STATUS) {
if (!(len == 3 || len == 4))
return -EINVAL;
tr[1].len = len + 1;
}
buf = kmalloc(tr[1].len, GFP_KERNEL);
if (!buf)
return -ENOMEM;
tr[1].rx_buf = buf;
gpiod_set_value_cansleep(dbi->dc, 0);
spi_message_init_with_transfers(&m, tr, ARRAY_SIZE(tr));
ret = spi_sync(spi, &m);
if (ret)
goto err_free;
if (tr[1].len == len) {
memcpy(data, buf, len);
} else {