The teleinfo
component allows you to retrieve data from a French electrical counter using Teleinformation (datasheet). It works with Linky electrical counter but also legacy EDF electrical counter.
A simple electronic assembly with an optocoupler and a resistor could let you retrieve detailed power consumption or power production. There is plenty of example on the web.
As the communication with the Teleinformation is done using UART, you need to have an UART bus <uart>
in your configuration with the rx_pin
connected to the output of the optocoupler component. Additionally, you need to set the baud rate to 9600bps if counter is configured to work in standard mode or 1200bps in historical mode. To find out which mode you are using, simply press -/+ buttons on the counter and look for Standard mode or Historical mode as below.
# Example configuration entry
uart:
id: uart_bus
rx_pin: GPIO3
tx_pin: GPIO1
baud_rate: 1200
parity: EVEN
data_bits: 7
teleinfo:
id: myteleinfo
update_interval: 60s
historical_mode: true
sensor:
- platform: teleinfo
tag_name: "HCHC"
name: "hchc"
unit_of_measurement: "Wh"
icon: mdi:flash
teleinfo_id: myteleinfo
- platform: teleinfo
tag_name: "HCHP"
name: "hchp"
unit_of_measurement: "Wh"
icon: mdi:flash
teleinfo_id: myteleinfo
- platform: teleinfo
tag_name: "PAPP"
name: "papp"
unit_of_measurement: "VA"
icon: mdi:flash
teleinfo_id: myteleinfo
text_sensor:
- platform: teleinfo
tag_name: "OPTARIF"
name: "optarif"
teleinfo_id: myteleinfo
In teleinfo platform:
- historical_mode (Optional): Wether to use historical mode or standard mode. With historical mode, baudrate of 1200 must be used whereas 9600 must be used in standard mode. Defaults to
False
. - update_interval (Optional,
config-time
): The interval to check the sensor. Defaults to60s
. - uart_id (Optional,
config-id
): Manually specify the ID of theUART Component <uart>
if you want to use multiple UART buses.
- tag_name (Required, string): Specify the tag you want to retrieve from the Teleinformation.
- id (Optional,
config-id
): Manually specify the ID used for code generation. - All other options from
Sensor <config-sensor>
.
- tag_name (Required, string): Specify the tag you want to retrieve from the Teleinformation.
- id (Optional,
config-id
): Manually specify the ID used for code generation. - All other options from
Text Sensor <config-text_sensor>
.
teleinfo/teleinfo.h
Edit