[Feature Request] PETG Temp Tower

[hawkeyexp]

Hi,

first to say: great plugin!!!

Would be nice if you can add more temp towers for different materials - but i think the big three pla / abs / petg is the most needed - so only petg is missing :-)

[5axes]

Updated in V1.0.8

[userosos]

I add the tower - part for calibration/PETg temp tower. Add chage g-code Tempfan tower. And it not work.

Untitled.zip

[5axes]

Looks like you set the wrong parameter in the script .. When we load your GCode. Temperature change are set every 3 steps.

As your settings for the layer Height are set to :

• First layer height : 0.3
• Layer height : 0.2

In this case settings must be :

And you should get these result :

[userosos]

I use default settings. I use material settings plugin also. May be it the error?

[5axes]

Ok that's normal you should not use the Fan option, that's why you have the same temperature on 3 level. Read the wiki concerning the script options

[userosos]

Ok that's normal you should not use the Fan option, that's why you have the same temperature on 3 level. Read the wiki concerning the script options

It works! Thx!

[5axes]

Updated in V1.0.8