AS is a collection of modules for VCV Rack by Alfredo Santamaria, Need a custom work?, you can find me at Hakken.com.mx.
AS Logo/Monogram Copyright (c) 2017 Alfredo Santamaria , All rights reserved. Panel graphics in res/ are © 2017 Derivative works may not use the AS logo or panel graphics including custom component graphics (knobs, switches, screws, caps,etc.).
AS is compatible with VCV Rack 0.6.X. releases, (see previous releases for 0.5.X. binaries and source files). You can download Mac, Win and Linux binary files and source on the Release Page
If you enjoy those modules you can support the development by making a donation, it will be appreciated!. Here's the link: DONATE
Fundamental ADSR module. Mods: graphics, sliders instead of knobs to provide faster visual input.
Fundamental VCA module. Mods: graphics, sliders instead of knobs to provide faster visual input, one input + lin/exp switch instead of two separate inputs.
V 0.5.3: Code fix, now the VCA module works ok when there's no envelope input present.
AS VCA module x 4, plus mixer functionality (user request).
V 0.5.5: First relase of this module.
Strum's Mental VCV Master Clock. Mods: graphics, reset trigger input and output.
V 0.5.2: all the trigger signals are 10v now, it seems that some other modules don't work fine with the correct voltages.
V 0.5.4: Fixed a reset signal issue.
V 0.5.5: 16th clock output now sends unipolar signal, just as the other outputs.
V 0.6.1: Now BPM Clock outputs a short length trigger signal, as most of the available clocks.
V 0.6.2: Small fix on the reset signal length.
V 0.6.5: Added a Regular/Extended switch to change the clock from 40-250 to 30-300 range. Had to add the switch instead of simply changing the default settings to avoid changing the bpm tempo on the patches already using the clock.
V 0.6.6: Added a CV input for the "RUN" switch.
V 0.6.7: Added a CV output for the "RUN" switch, sends a trigger signal on each press of the switch.
A BPM to delay/hz calculator to setup easier those nice delay effects.
V 0.6.4: First relase of this module.
V 0.6.5: Added an external input to detect a BPM from a LFO or some other sources, BPM detection code based on Koralfx Beatovnik from Tomek Sosnowski, nice work Tomek!.
New slimmed down BPM Delay/MS Calculator module, just like the old BPM to delay/hz calculator module but without the calc values display to free some HP space.
V 0.6.11: First relase of this module.
Same as 8 channel mixer, but 2 channels only for those small setups(OmriCohen request).
V 0.6.13: First relase of this module.
Same as 8 channel mixer, but 4 channels only for those small setups(OmriCohen request).
V 0.6.13: First relase of this module.
Fundamental/Autodafe mixer module. Mods: graphics, sliders for channel volume, stereo or mono output(L channel outputs L+R signal if R channel is not active). Now with main mix mute button. Beware,the default setting for each channel volume is at 70% in stead of 0%.
V 0.5.2: added MIX L & R input to chain mixers without giving up 2 mixer channels.
2x5 Signal multiplier.
V 0.5.7 Module size reduced to 5HP
V 0.6.13 New feature: If the input 2 is not active the second row of outputs takes the value of input 1 so the module becomes a multi 1 x 10, nice and simple idea! requested by MarcBroule.
2x5 CV Signal merger.
V 0.5.7: First relase of this module.
V 0.5.4, New module added, Mono VU Meter made to match the 8CH Mixer.
V 0.5.3, New module added, Stereo VU Meter made to match the 8CH Mixer.
Fundamental/Autodafe SEQ module. Mods: graphics, digital display to show the number of steps selected.
V 0.5.2: added digital display to show current sequence step so you can run/stop the sequence and tune in the current step.
V 0.5.3: added edit mode: manual trigger with current step selector buttons and blinking led light to highlight the current step. Send a row output to a NYSTHI Hot Tuna and enjoy precise step tuning!
V 0.5.4: Exposed the trigger mode settings into the panel (contextual menu is still there but it won't change the mode)
RODENTMODULES MuO. Mods: graphics, smaller panel size.
V 0.5.4 Added dc blocker code, modified a bit the internal parameters.
V 0.5.5 Extendend the freq range 1 octave below.
V 0.5.7 Module size reduced to 4HP
V 0.6.10 Added a base frequency switch to change from A (original and default) to C (to match the current VCV standard).
VCV tutorial module. Mods: graphics, proper sine wave.
V 0.5.7 Module size reduced to 4HP
V 0.6.10 Added a base frequency switch to change from A (original and default) to C (to match the current VCV standard).
Fundamental LFO module. Mods:graphics, controls stripped to the basics but you get 3 LFOS on the same space.
Just like Befaco Attenuverter module but with added cv inputs to modulate both Attenueverter and Offset parameters.
V 0.6.1: First relase of this module.
A couple of manual trigger buttons, one ON/OFF, one temporary, both with 4 trigger outputs, trigger volts knob going from 1 to 10 v output.
(NOTICE: Triggers MKI will supersede Triggers, so Triggers will be removed from the plugin by v0.6 but you have time now to replace it on your current patches and keep everything working fine).
A manual CV signal trigger module with latch and temporary triggers, volts knob lets you adjust the range from -10v to 10v output.
V 0.5.7: First relase of this module. V 0.6.1: Changed the volts range to -10v +10v and now the display shows positive values in green, and negative values in red.
A manual CV signal temporary trigger module with labeling integrated, so you remember where the signal is going.
The labels list includes:
"------", "MUTE"," SOLO"," RESET"," DRUMS"," KICK"," SNARE"," HIHAT"," CLAP"," PERC","BASS 1","BASS 2"," GTR 1",
" GTR 2","LEAD 1","LEAD 2"," PAD 1"," PAD 2","CHORDS"," FX 1"," FX 2"," SEQ 1"," SEQ 2"," MIX 1"," MIX 2",
" AUX 1"," AUX 2"," ON"," OFF"," START"," STOP"," PAUSE"," UP"," DOWN"," LEFT"," RIGHT", "RUN"
V 0.5.7: First relase of this module.
V 0.6.5: Added "RUN" label at the end of the list.
A manual CV signal temporary trigger module with labeling integrated, now you can type directly the labels you want to use. Also added a handy second EXT input.
V 0.6.9: First relase of this module.
Utility module to convert from one voltage range to another, available inputs are: -5v/5v, 0v/5v, 0v/10v, 1V/OCT*. Available output signal options are: -5v/5v, 0v/5v, -10v/10v, 0v/10v* *1V/OCT option is to convert any voltage source to 1 octave 1V/OCT range.
V 0.6.9: First relase of this module.
Strum's Mental VCV Counters module. Mods: graphics, 3 counters, up to 64 steps each, added reset lights to the buttons.
V 0.5.4: First relase of this module.
V 0.5.5: code tweaks.
Delay the start of a flow of signals by a set number of clock ticks (TAOS request).
V 0.5.5: First relase of this module.
V 0.6.5: Now it features soft mute, so you can use it both for audio and cv signals without any switching noise.
Cut the flow of signals after a set number of clock ticks (TAOS request).
V 0.5.6: First relase of this module.
V 0.6.5: Now it features soft mute, so you can use it both for audio and cv signals without any switching noise.
Cut the flow of signals with a switch or a cv signal (TAOS request).
V 0.6.0: First relase of this module.
V 0.6.5: Now it features soft mute, so you can use it both for audio and cv signals without any switching noise.
V 0.6.9: Switch selector added to reverse the default ON/OFF swtiches light behavior(by usrer request).
Delay the incomming CV signal by set milliseconds, with signal thru and delayed output. You can chain several Signal Delay modules together for unlimited length of delays. (TAOS request).
V 0.5.5: First relase of this module.
V 0.6,9: Small fix on the ms CV input to take the proper values fron BPM calc module.
CV to Trigger module. Feed a midi signal to the CV inputs and it will output one trigger signal when the incoming signal rises above 0v, and another trigger signal when the incoming signal returns to 0v. Useful to use your external hardware controller/keyboard as a trigger.
V 0.6.7: First relase of this module.
Zero crossing CV to Trigger module. Each time a CV input hits 0v it will generate a trigger signal on the respective output. User request.
V 0.6.10: First relase of this module.
Fundamental Delay module. Mods: graphics, digital display to show delay time in MS , wet signal send & return, bypass switch.
V 0.5.4: Updated look.
V 0.5.5 CHanged the time knob reading from exponential to linear, now you can set any value precisely at the whole 1 to 10k ms range.
V 0.6.3: bypass CV input added.
V 0.6.5: Now it features soft bypass to avoid switching noise.
Stereo version of the Delay Plus module, with link switches for Feedback and Color parameters. If the respective switch is active, the left knob controls the changes for both left and right channels.
V 0.6.7: First relase of this module.
Autodafe's Phaser Fx module. Mods: graphics, bypass switch.
V 0.5.4: Added CV inputs for each parameter, updated look.
V 0.6.3: bypass CV input added.
V 0.6.5: Now it features soft bypass to avoid switching noise.
Overdrive/clipping Fx module with DRIVE, TONE and GAIN parameters, to get those acid bass lines we all love!.
V 0.5.4: First relase of this module.
V 0.6.3: bypass CV input added.
V 0.6.5: Now it features soft bypass to avoid switching noise(Results may change according to signal levels).
Reverb Fx module based on ML_modules reverb and Freeverb code, with DECAY, DAMP and BLEND parameters, a little bit tamed Reverb with mixed output signal.
0.5.4: First relase of this module.
V 0.6.3: bypass CV input added.
V 0.6.5: Now it features soft bypass to avoid switching noise.
Stereo version of the Reverb module, BLEND is replaced with a DRY /WET knob, to work better when used with a mixer send/return ports.
V 0.6.7: First relase of this module.
Tremolo Fx module with SHAPE, SPEED and BLEND parameters, and a phase switch (set your effect, duplicate the module and invert the phase for stereo tremolo setup)your Tremolo to go!.
0.5.6: First relase of this module.
V 0.6.3: bypass CV input added.
V 0.6.5: Now it features soft bypass to avoid switching noise.
Stereo version of the Tremolo module, use the phase switch to change from synced L and R channels to inverted phase, to get stereo panning effect.
V 0.6.7: First relase of this module.
HetrickCV Wave Shaper module. Mods: graphics, bypass switch.
V 0.5.2: added back the voltage range switch.
V 0.5.4: Updated look.
V 0.6.3: bypass CV input added.
V 0.6.5: Now it features soft bypass to avoid switching noise.
Blank panels in 4, 6 & 8 HP.
New special "blank" panel 8 HP added for v0.6.0.