Skip to content
New issue

Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.

Sign up for GitHub

By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.

Already on GitHub? Sign in to your account

Jump to bottom

Mount snap "auto-cpufreq" (82) (installation not allowed by "etc-auto-cpufreq-conf" plug rule of interface "system-files" for "auto-cpufreq" snap) #457

Closed
kurtobando opened this issue Nov 20, 2022 · 7 comments
Closed

Mount snap "auto-cpufreq" (82) (installation not allowed by "etc-auto-cpufreq-conf" plug rule of interface "system-files" for "auto-cpufreq" snap) #457

kurtobando opened this issue Nov 20, 2022 · 7 comments

Comments

@kurtobando
Copy link

Hi Team,

I cannot install auto-cpufreq via snap in Raspberry Pi 3 Model B Plus Rev 1.3. Initially, i tried this approach;

git clone https://github.com/AdnanHodzic/auto-cpufreq.git
cd auto-cpufreq && sudo ./auto-cpufreq-installer

However, i have the same exp with;
#192

So i tried to install via snap as suggested; however, i cannot get it working on my machine. I'm getting these error messages;

$ sudo snap install auto-cpufreq
error: cannot perform the following tasks:
- Mount snap "auto-cpufreq" (82) (installation not allowed by "etc-auto-cpufreq-conf" plug rule of interface "system-files" for "auto-cpufreq" snap)

System information:

$ snap --version
snap      2.57.5
snapd     2.57.5
series    16
raspbian  11
kernel    5.15.76-v7+

$ cat /proc/cpuinfo
processor	: 0
model name	: ARMv7 Processor rev 4 (v7l)
BogoMIPS	: 38.40
Features	: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 1
model name	: ARMv7 Processor rev 4 (v7l)
BogoMIPS	: 38.40
Features	: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 2
model name	: ARMv7 Processor rev 4 (v7l)
BogoMIPS	: 38.40
Features	: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

processor	: 3
model name	: ARMv7 Processor rev 4 (v7l)
BogoMIPS	: 38.40
Features	: half thumb fastmult vfp edsp neon vfpv3 tls vfpv4 idiva idivt vfpd32 lpae evtstrm crc32 
CPU implementer	: 0x41
CPU architecture: 7
CPU variant	: 0x0
CPU part	: 0xd03
CPU revision	: 4

Hardware	: BCM2835
Revision	: a020d3
Serial		: 00000000c3715c32
Model		: Raspberry Pi 3 Model B Plus Rev 1.3

$ cat /etc/*release
PRETTY_NAME="Raspbian GNU/Linux 11 (bullseye)"
NAME="Raspbian GNU/Linux"
VERSION_ID="11"
VERSION="11 (bullseye)"
VERSION_CODENAME=bullseye
ID=raspbian
ID_LIKE=debian
HOME_URL="http://www.raspbian.org/"
SUPPORT_URL="http://www.raspbian.org/RaspbianForums"
BUG_REPORT_URL="http://www.raspbian.org/RaspbianBugs"

Any suggestions on how to go about this?
@SunkenHero
Copy link
Contributor

Have you tried using the installer script?

@kurtobando
Copy link
Author

kurtobando commented Nov 21, 2022 •
edited

Have you tried using the installer script?

Are you referring to ?

auto-cpufreq-installer

Yes, i did. If not, can you guide me which installer script you are referring to?

@SunkenHero
Copy link
Contributor

Yes i meant that script, i would assume the installation failed with the installer script too. Could you please give the error output.

@kurtobando
Copy link
Author

Yes i meant that script, i would assume the installation failed with the installer script too. Could you please give the error output.

Here are the steps i have done so far;

# ./auto-cpufreq-installer 

-------------------------- auto-cpufreq installer -----------------------------

Welcome to auto-cpufreq tool installer.

Options:

[I]nstall
[R]emove
[Q]uit

Select a key: [i/r/q]: i

-------------------------------------------------------------------------------

Detected Debian based distribution

-------------------------------------------------------------------------------

Setting up Python environment

Reading package lists... Done
Building dependency tree... Done
Reading state information... Done
dmidecode is already the newest version (3.3-2).
python3-dev is already the newest version (3.9.2-3).
python3-setuptools is already the newest version (52.0.0-4).
python3-venv is already the newest version (3.9.2-3).
python3-pip is already the newest version (20.3.4-4+rpt1+deb11u1).
0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.

Installing necessary Python packages

Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: pip in /opt/auto-cpufreq/venv/lib/python3.9/site-packages (20.3.4)
Collecting pip
  Using cached pip-22.3.1-py3-none-any.whl (2.1 MB)
Collecting wheel
  Using cached https://www.piwheels.org/simple/wheel/wheel-0.38.4-py3-none-any.whl (36 kB)
Installing collected packages: wheel, pip
  Attempting uninstall: pip
    Found existing installation: pip 20.3.4
    Uninstalling pip-20.3.4:
      Successfully uninstalled pip-20.3.4
Successfully installed pip-22.3.1 wheel-0.38.4
Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Requirement already satisfied: setuptools in /opt/auto-cpufreq/venv/lib/python3.9/site-packages (from -r requirements.txt (line 1)) (44.1.1)
Collecting psutil
  Using cached https://www.piwheels.org/simple/psutil/psutil-5.9.4-cp39-abi3-linux_armv7l.whl (274 kB)
Collecting click
  Using cached https://www.piwheels.org/simple/click/click-8.1.3-py3-none-any.whl (96 kB)
Collecting distro
  Using cached https://www.piwheels.org/simple/distro/distro-1.8.0-py3-none-any.whl (20 kB)
Installing collected packages: psutil, distro, click
Successfully installed click-8.1.3 distro-1.8.0 psutil-5.9.4

-------------------------------------------------------------------------------

installing auto-cpufreq tool

running install
running bdist_egg
running egg_info
writing auto_cpufreq.egg-info/PKG-INFO
writing dependency_links to auto_cpufreq.egg-info/dependency_links.txt
writing requirements to auto_cpufreq.egg-info/requires.txt
writing top-level names to auto_cpufreq.egg-info/top_level.txt
reading manifest file 'auto_cpufreq.egg-info/SOURCES.txt'
writing manifest file 'auto_cpufreq.egg-info/SOURCES.txt'
installing library code to build/bdist.linux-armv7l/egg
running install_lib
running build_py
creating build/bdist.linux-armv7l/egg
creating build/bdist.linux-armv7l/egg/auto_cpufreq
copying build/lib/auto_cpufreq/power_helper.py -> build/bdist.linux-armv7l/egg/auto_cpufreq
copying build/lib/auto_cpufreq/core.py -> build/bdist.linux-armv7l/egg/auto_cpufreq
copying build/lib/auto_cpufreq/tlp_stat_parser.py -> build/bdist.linux-armv7l/egg/auto_cpufreq
copying build/lib/auto_cpufreq/__init__.py -> build/bdist.linux-armv7l/egg/auto_cpufreq
byte-compiling build/bdist.linux-armv7l/egg/auto_cpufreq/power_helper.py to power_helper.cpython-39.pyc
byte-compiling build/bdist.linux-armv7l/egg/auto_cpufreq/core.py to core.cpython-39.pyc
byte-compiling build/bdist.linux-armv7l/egg/auto_cpufreq/tlp_stat_parser.py to tlp_stat_parser.cpython-39.pyc
byte-compiling build/bdist.linux-armv7l/egg/auto_cpufreq/__init__.py to __init__.cpython-39.pyc
creating build/bdist.linux-armv7l/egg/EGG-INFO
installing scripts to build/bdist.linux-armv7l/egg/EGG-INFO/scripts
running install_scripts
running build_scripts
creating build/bdist.linux-armv7l/egg/EGG-INFO/scripts
copying build/scripts-3.9/auto-cpufreq -> build/bdist.linux-armv7l/egg/EGG-INFO/scripts
changing mode of build/bdist.linux-armv7l/egg/EGG-INFO/scripts/auto-cpufreq to 755
copying auto_cpufreq.egg-info/PKG-INFO -> build/bdist.linux-armv7l/egg/EGG-INFO
copying auto_cpufreq.egg-info/SOURCES.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying auto_cpufreq.egg-info/dependency_links.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying auto_cpufreq.egg-info/requires.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying auto_cpufreq.egg-info/top_level.txt -> build/bdist.linux-armv7l/egg/EGG-INFO
copying auto_cpufreq.egg-info/zip-safe -> build/bdist.linux-armv7l/egg/EGG-INFO
creating 'dist/auto_cpufreq-1.9.6+d77c1de6-py3.9.egg' and adding 'build/bdist.linux-armv7l/egg' to it
removing 'build/bdist.linux-armv7l/egg' (and everything under it)
Processing auto_cpufreq-1.9.6+d77c1de6-py3.9.egg
Copying auto_cpufreq-1.9.6+d77c1de6-py3.9.egg to /opt/auto-cpufreq/venv/lib/python3.9/site-packages
Adding auto-cpufreq 1.9.6+d77c1de6 to easy-install.pth file
Installing auto-cpufreq script to /opt/auto-cpufreq/venv/bin

Installed /opt/auto-cpufreq/venv/lib/python3.9/site-packages/auto_cpufreq-1.9.6+d77c1de6-py3.9.egg
Processing dependencies for auto-cpufreq==1.9.6+d77c1de6
Searching for setuptools==44.1.1
Best match: setuptools 44.1.1
Adding setuptools 44.1.1 to easy-install.pth file
Installing easy_install script to /opt/auto-cpufreq/venv/bin

Using /opt/auto-cpufreq/venv/lib/python3.9/site-packages
Searching for psutil==5.9.4
Best match: psutil 5.9.4
Adding psutil 5.9.4 to easy-install.pth file

Using /opt/auto-cpufreq/venv/lib/python3.9/site-packages
Searching for distro==1.8.0
Best match: distro 1.8.0
Adding distro 1.8.0 to easy-install.pth file
Installing distro script to /opt/auto-cpufreq/venv/bin

Using /opt/auto-cpufreq/venv/lib/python3.9/site-packages
Searching for click==8.1.3
Best match: click 8.1.3
Adding click 8.1.3 to easy-install.pth file

Using /opt/auto-cpufreq/venv/lib/python3.9/site-packages
Finished processing dependencies for auto-cpufreq==1.9.6+d77c1de6
writing list of installed files to 'files.txt'

-------------------------------------------------------------------------------

auto-cpufreq tool successfully installed.

For list of options, run:
auto-cpufreq --help

-------------------------------------------------------------------------------

then run;

# auto-cpufreq --monitor

Note: You can quit monitor mode by pressing "ctrl+c"

-------------------------------------------------------------------------------

Linux distro: Raspbian GNU/Linux 11 bullseye
Linux kernel: 5.15.76-v7+
Processor: ARMv7 Processor rev 4 (v7l)
Cores: 4
Architecture: armv7l
Driver: cpufreq-dt

------------------------------ Current CPU stats ------------------------------

CPU max frequency: 1400 MHz
CPU min frequency: 600 MHz

Traceback (most recent call last):
  File "/opt/auto-cpufreq/venv/bin/auto-cpufreq", line 4, in <module>
    __import__('pkg_resources').run_script('auto-cpufreq==1.9.6+d77c1de6', 'auto-cpufreq')
  File "/opt/auto-cpufreq/venv/lib/python3.9/site-packages/pkg_resources/__init__.py", line 666, in run_script
    self.require(requires)[0].run_script(script_name, ns)
  File "/opt/auto-cpufreq/venv/lib/python3.9/site-packages/pkg_resources/__init__.py", line 1469, in run_script
    exec(script_code, namespace, namespace)
  File "/opt/auto-cpufreq/venv/lib/python3.9/site-packages/auto_cpufreq-1.9.6+d77c1de6-py3.9.egg/EGG-INFO/scripts/auto-cpufreq", line 226, in <module>
  File "/opt/auto-cpufreq/venv/lib/python3.9/site-packages/click/core.py", line 1130, in __call__
    return self.main(*args, **kwargs)
  File "/opt/auto-cpufreq/venv/lib/python3.9/site-packages/click/core.py", line 1055, in main
    rv = self.invoke(ctx)
  File "/opt/auto-cpufreq/venv/lib/python3.9/site-packages/click/core.py", line 1404, in invoke
    return ctx.invoke(self.callback, **ctx.params)
  File "/opt/auto-cpufreq/venv/lib/python3.9/site-packages/click/core.py", line 760, in invoke
    return __callback(*args, **kwargs)
  File "/opt/auto-cpufreq/venv/lib/python3.9/site-packages/auto_cpufreq-1.9.6+d77c1de6-py3.9.egg/EGG-INFO/scripts/auto-cpufreq", line 100, in main
  File "/opt/auto-cpufreq/venv/lib/python3.9/site-packages/auto_cpufreq-1.9.6+d77c1de6-py3.9.egg/auto_cpufreq/core.py", line 1107, in sysinfo
IndexError: list index out of range

Same behavior with #192

@SunkenHero
Copy link
Contributor

You can try out my Fork. It should display -1 for the frequencys.

@AdnanHodzic
Copy link
Owner

It would be great if we got it working for RPI's, because I also have a RPI K8s cluster where I would also like to use auto-cpufreq but never got time to properly make it work.

Hence, let's make it work first with installer, and then once we have working changes I can update the snap package.

@AdnanHodzic
Copy link
Owner

This problem should now be fixed as part of 1.9.8 release as it also includes >= RPI 4 support.

Sign up for free to join this conversation on GitHub. Already have an account? Sign in to comment
Assignees
No one assigned
Labels
None yet
Projects
None yet
Milestone
No milestone
Development

No branches or pull requests
3 participants
@AdnanHodzic @kurtobando @SunkenHero