rsnapshot is a filesystem backup utility based on rsync.
Using rsnapshot, it is possible to take snapshots of your filesystems at different points in time. Using hard links, rsnapshot creates the illusion of multiple full backups, while only taking up the space of one full backup plus differences. When coupled with ssh, it is possible to take snapshots of remote filesystems as well. This document is a tutorial in the installation and configuration of rsnapshot.
rsnapshot is a filesystem backup utility based on rsync. Using rsnapshot, it is possible to take snapshots of your filesystems at different points in time. Using hard links, rsnapshot creates the illusion of multiple full backups, while only taking up the space of one full backup plus differences. When coupled with ssh, it is possible to take snapshots of remote filesystems as well.
rsnapshot is written in Perl, and depends on rsync. OpenSSH, GNU cp, GNU du, and the BSD logger program are also recommended, but not required. All of these should be present on most Linux systems. rsnapshot is written with the lowest common denominator in mind. It only requires at minimum Perl 5.004 and rsync. As a result of this, it works on pretty much any UNIX-like system you care to throw at it. It has been successfully tested with Perl 5.004 through 5.8.2, on Debian, Redhat, Fedora, Solaris, Mac OS X, FreeBSD, OpenBSD, NetBSD, and IRIX.
We have a snapshot root under which all backups are stored. By default, this is the directory /.snapshots/. Within this directory, other directories are created for the various intervals that have been defined. In the beginning it will be empty, but once rsnapshot has been running for a week, it should look something like this::
[root@localhost]# ls -l /.snapshots/
drwxr-xr-x 7 root root 4096 Dec 28 00:00 daily.0
drwxr-xr-x 7 root root 4096 Dec 27 00:00 daily.1
drwxr-xr-x 7 root root 4096 Dec 26 00:00 daily.2
drwxr-xr-x 7 root root 4096 Dec 25 00:00 daily.3
drwxr-xr-x 7 root root 4096 Dec 24 00:00 daily.4
drwxr-xr-x 7 root root 4096 Dec 23 00:00 daily.5
drwxr-xr-x 7 root root 4096 Dec 22 00:00 daily.6
drwxr-xr-x 7 root root 4096 Dec 29 00:00 hourly.0
drwxr-xr-x 7 root root 4096 Dec 28 20:00 hourly.1
drwxr-xr-x 7 root root 4096 Dec 28 16:00 hourly.2
drwxr-xr-x 7 root root 4096 Dec 28 12:00 hourly.3
drwxr-xr-x 7 root root 4096 Dec 28 08:00 hourly.4
drwxr-xr-x 7 root root 4096 Dec 28 04:00 hourly.5
Inside each of these directories is a "full" backup of that point in time. The destination directory paths you specified under the backup and backup_script parameters get stuck directly under these directories. In the example::
backup /etc/ localhost/The /etc/ directory will initially get backed up into /.snapshots/hourly.0/localhost/etc/
Each subsequent time rsnapshot is run with the hourly command, it will rotate the hourly.X directories, and then "copy" the contents of the hourly.0 directory (using hard links) into hourly.1.
When rsnapshot daily is run, it will rotate all the daily.X directories, then copy the contents of hourly.5 into daily.0.
hourly.0 will always contain the most recent snapshot, and daily.6 will always contain a snapshot from a week ago. Unless the files change between snapshots, the "full" backups are really just multiple hard links to the same files. Thus, if your /etc/passwd file doesn't change in a week, hourly.0/localhost/etc/passwd and daily.6/localhost/etc /passwd will literally be the same exact file. This is how rsnapshot can be so efficient on space. If the file changes at any point, the next backup will unlink the hard link in hourly.0, and replace it with a brand new file. This will now take double the disk space it did before, but it is still considerably less than it would be to have full unique copies of this file 13 times over.
Remember that if you are using different intervals than the ones in this example, the first interval listed is the one that gets updates directly from the main filesystem. All subsequently listed intervals pull from the previous intervals. For example, if you had weekly, monthly, and yearly intervals defined (in that order), the weekly ones would get updated directly from the filesystem, the monthly ones would get updated from weekly, and the yearly ones would get updated from monthly.
When rsnapshot is first run, it will create the snapshot_root directory (/.snapshots/ by default). It assigns this directory the permissions 700, and for good reason. The snapshot root will probably contain files owned by all sorts of users on your system. If any of these files are writeable (and of course some of them will be), the users will still have write access to their files. Thus, if they can see the snapshots directly, they can modify them, and the integrity of the snapshots can not be guaranteed.
For example, if a user had write permission to the backups and accidentally ran rm -rf /, they would delete all their files in their home directory and all the files they owned in the backups!
- At a minimum:
perl,rsync - Optionally:
ssh,logger, GNUcp, GNUdu - Additionally, it will help if you have reasonably good sysadmin skills.
apt-get install perl rsync sshJust copy the script to your systems bin location:
cp rsnapshot /usr/bin/rsnapshotTo copy the example config file into the location rsnapshot will be looking for the real config file:
cp rsnapshot.default.conf /etc/rsnapshot.confThe rsnapshot.conf config file is well commented, and much of it should be fairly self-explanatory. For a full reference of all the various options, please consult the rsnapshot man page. Type:
man rsnapshotThis will give you the complete documentation. However, it assumes that you already know what you're doing to a certain extent. If you just want to get something up and running, this tutorial is a better place to start. If your system can't find the man page, /usr/local/man probably isn't in your $MANPATH environmental variable. This is beyond the scope of this document, but if it isn't working for you, you can always read the newest man page on the rsnapshot web site at http://www.rsnapshot.org/
In this example, we will be using the /.snapshots/ directory to hold the filesystem snapshots. This is referred to as the "snapshot root". Feel free to put this anywhere you have lots of free disk space. However, the examples in this document assume you have not changed this parameter, so you will have to substitute this in your commands if you put it somewhere else.
Also please note that fields are separated by tabs, not spaces. The reason for this is so it's easier to specify file paths with spaces in them.
If enabled, the cmd_cp parameter should contain the path to the GNU cp program on your filesystem. If you are using Linux, be sure to uncomment this by removing the octothorpe (#) in front of it. If you are using BSD, Solaris, IRIX, or most other UNIX variants, you should leave this commented out.
What makes GNU cp so special is that unlike the traditional UNIX cp, it has the ability to make recursive "copies" of directories as hard links.
If you don't have GNU cp, there is a subroutine in rsnapshot that somewhat approximates this functionality (although it won't support more esoteric files such as device nodes, FIFOs, sockets, etc). This gets followed up by another call to rsync, which transfers the remaining special files, if any. In this way, rsnapshot can support all file types on every platform.
The rule of thumb is that if you're on a Linux system, leave cmd_cp enabled. If you aren't on a Linux system, leave cmd_cp disabled. There are reports of GNU cp working on BSD and other non-Linux platforms, but there have also been some cases where problems have been encountered. If you enable cmd_cp on a non-Linux platform, please let the mailing list know how it worked out for you.
The cmd_rsync parameter must not be commented out, and it must point to a working version of rsync. If it doesn't, the program just will not work at all.
Please note that if you are using IRIX, there is another program named rsync that is different than the "real" rsync most people know of. If you're on an IRIX machine, you should double check this.
If you have ssh installed on your system, you will want to uncomment the cmd_ssh parameter. By enabling ssh, you can take snapshots of any number of remote systems. If you don't have ssh, or plan to only take snapshots of the local filesystem, you may safely leave this commented out.
The cmd_logger parameter specifies the path to the logger program. logger is a command line interface to syslog. See the logger man page for more details. logger should be a standard part of most UNIX-like systems. It appears to have remained unchanged since about 1993, which is good for cross-platform stability. If you comment out this parameter, it will disable syslog support in rsnapshot. It is recommended that you leave this enabled.
The cmd_du parameter specifies the path to the du program. du is a command line tool that reports on disk usage. rsnapshot uses du to generate reports about the actual amount of disk space taken up, which is otherwise difficult to estimate because of all the hard links.
If you comment this out, rsnapshot will try to use the version of du it finds in your path, if possible. The GNU version of du is recommended, since it has the best selection of features, and supports the most options. The BSD version also seems to work, although some versions don't support the -h flag. Solaris du does not work at all, because it doesn't support the -c parameter.
If you have rsync version 2.5.7 or later, you may want to enable this. With link_dest enabled, rsnapshot relies on rsync to create recursive hard links, overriding GNU cp in most, but not all, cases. With link_dest enabled, every single file on your system can be backed up in one pass, on any operating system. To get the most out of rsnapshot on non-Linux platforms, link_dest should be enabled. Be advised, however, that if a remote host is unavailable during a backup, rsnapshot will take an extra step and roll back the files from the previous backup. Using GNU cp, this would not be necessary.
rsnapshot has no idea how often you want to take snapshots. Everyone's backup scheme may be different. In order to specify how much data to save, you need to tell rsnapshot which "intervals" to keep, and how many of each. An interval, in the context of the rsnapshot config file, is a unit of time measurement. These can actually be named anything (as long as it's alphanumeric, and not a reserved word), but by convention we will call ours hourly and daily. In this example, we want to take a snapshot every four hours, or six times a day (these are the hourly intervals). We also want to keep a second set, which are taken once a day, and stored for a week (or seven days). This happens to be the default, so as you can see the config file reads::
retain hourly 6
retain daily 7
It also has some other entries, but you can either ignore them or comment them out for now.
Please note that the hourly interval is specified first. This is very important. The first interval line is assumed to be the smallest unit of time, with each additional line getting successively larger. Thus, if you add a yearly interval, it should go at the bottom, and if you add a minutes interval, it should go before hourly. It's also worth noting that the snapshots get "pulled up" from the smallest interval to the largest. In this example, the daily snapshots get pulled from the oldest hourly snapshot, not directly from the main filesystem.
Please note that the destination paths specified here are based on the assumption that the --relative flag is being passed to rsync via the rsync_long_args parameter. If you are installing for the first time, this is the default setting. If you upgraded from a previous version, please read the INSTALL file that came with the source distribution for more information.
This is the section where you tell rsnapshot what files you actually want to back up. You put a "backup" parameter first, followed by the full path to the directory or network path you're backing up. The third column is the relative path you want to back up to inside the snapshot root. Let's look at an example::
backup /etc/ localhost/
In this example, backup tells us it's a backup point. /etc/ is the full path to the directory we want to take snapshots of, and localhost/ is a directory inside the snapshot_root we're going to put them in. Using the word localhost as the destination directory is just a convention. You might also choose to use the server's fully qualified domain name instead of localhost. If you are taking snapshots of several machines on one dedicated backup server, it's a good idea to use their various hostnames as directories to keep track of which files came from which server.
In addition to full paths on the local filesystem, you can also backup remote systems using rsync over ssh. If you have ssh installed and enabled (via the cmd_ssh parameter), you can specify a path like::
backup root@example.com:/etc/ example.com/
This behaves fundamentally the same way, but you must take a few extra things into account.
-
The ssh daemon must be running on example.com
-
You must have access to the account you specify the remote machine, in this case the root user on example.com.
-
You must have key-based logins enabled for the root user at example.com, without passphrases. If you wanted to perform backups as another user, you could specify the other user instead of root for the source (i.e. user@domain.com). Please note that allowing remote logins with no passphrase is a security risk that may or may not be acceptable in your situation. Make sure you guard access to the backup server very carefully! For more information on how to set this up, please consult the ssh man page, or a tutorial on using ssh public and private keys. You will find that the key based logins are better in many ways, not just for rsnapshot but for convenience and security in general.
Troy Johnson's excellent tutorial on using nifty ssh features for secure snapshots which, in case his site ever suffers a mishap, is mirroredhereon this site.http://www.jdmz.net/rsnapshot http://www.rsnapshot.org/howto/using-rsnapshot-and-ssh.html
-
This backup occurs over the network, so it may be slower. Since this uses rsync, this is most noticeable during the first backup. Depending on how much your data changes, subsequent backups should go much, much faster since rsync only sends the differences between files.
With this parameter, the second column is the full path to an executable backup script, and the third column is the local path you want to store it in (just like with the "backup" parameter). For example::
backup_script /usr/local/bin/backup_pgsql.sh localhost/postgres/
In this example, rsnapshot will run the script /usr/local/bin/backup_pgsql.sh in a temp directory, then sync the results into the localhost/postgres/ directory under the snapshot root. You can find the backup_pgsql.sh example script in the utils/ directory of the source distribution. Feel free to modify it for your system.
Your backup script simply needs to dump out the contents of whatever it does into it's current working directory. It can create as many files and/or directories as necessary, but it should not put its files in any pre-determined path. The reason for this is that rsnapshot creates a temp directory, changes to that directory, runs the backup script, and then syncs the contents of the temp directory to the local path you specified in the third column. A typical backup script would be one that archives the contents of a database. It might look like this::
#!/bin/sh
/usr/bin/mysqldump -uroot mydatabase > mydatabase.sql
/bin/chmod 644 mydatabase.sqlThere are several example scripts in the utils/ directory of the rsnapshot source distribution to give you more ideas.
Make sure the destination path you specify is unique. The backup script will completely overwrite anything in the destination path, so if you tried to specify the same destination twice, you would be left with only the files from the last script. Fortunately, rsnapshot will try to prevent you from doing this when it reads the config file.
Please remember that these backup scripts will be invoked as the user running rsnapshot. In our example, this is root. Make sure your backup scripts are owned by root, and not writable by anyone else. If you fail to do this, anyone with write access to these backup scripts will be able to put commands in them that will be run as the root user. If they are malicious, they could take over your server.
When you have made all your changes, you should verify that the config file is syntactically valid, and that all the supporting programs are where you think they are. To do this, run rsnapshot with the configtest argument::
rsnapshot configtest
If all is well, it should say Syntax OK. If there's a problem, it should tell you exactly what it is. Make sure your config file is using tabs and not spaces, etc.
The final step to test your configuration is to run rsnapshot in test mode. This will print out a verbose list of the things it will do, without actually doing them. To do a test run, run this command::
rsnapshot -t hourly
This tells rsnapshot to simulate an "hourly" backup. It should print out the commands it will perform when it runs for real. Please note that the test output might be slightly different than the real execution, but only because the test doesn't actually do things that may be checked for later in the program. For example, if the program will create a directory and then later test to see if that directory exists, the test run might claim that it would create the directory twice, since it didn't actually get created during the test. This should be the only type of difference you will see while running a test.
Now that you have your config file set up, it's time to set up rsnapshot to be run from cron. As the root user, edit root's crontab by typing:
crontab -eYou could alternately keep a crontab file that you load in, but the concepts are the same. You want to enter the following information into root's crontab::
0 */4 * * * /usr/local/bin/rsnapshot hourly
30 23 * * * /usr/local/bin/rsnapshot daily
It is usually a good idea to schedule the larger intervals to run a bit before the lower ones. For example, in the crontab above, notice that daily runs 30 minutes before hourly. This helps prevent race conditions where the daily would try to run before the hourly job had finished. This same strategy should be extended so that a weekly entry would run before the daily and so on.
The simplest, but least flexible solution, is to simply deny non-root users access to the snapshot root altogether. The root user will still have access of course, and as with all other aspects of system administration, must be trusted not to go messing with things too much. However, by simply denying access to everyone, the root user will be the only one who can pull backups. This may or may not be desirable, depending on your situation. For a small setup or a single-user machine, this may be all you need.
If users need to be able to pull their own backups, you will need to do a little extra work up front (but probably less work in the long run). The best way to do this seems to be creating a container directory for the snapshot root with 700 permissions, giving the snapshot root directory 755 permissions, and mounting the snapshot root for the users read-only. This can be done over NFS and Samba, to name two possibilities. Let's explore how to do this using NFS on a single machine:
Set the snapshot_root variable in /etc/rsnapshot.conf equal to /.private/.snapshots/ ::
snapshot_root /.private/.snapshots/
Create the container directory::
mkdir /.private/Create the real snapshot root::
mkdir /.private/.snapshots/Create the read-only snapshot root mount point::
mkdir /.snapshots/Set the proper permissions on these new directories::
chmod 0700 /.private/
chmod 0755 /.private/.snapshots/
chmod 0755 /.snapshots/In /etc/exports, add /.private/.snapshots/ as a read only NFS export::
/.private/.snapshots/ 127.0.0.1(ro,no_root_squash)In /etc/fstab, mount /.private/.snapshots/ read-only under /.snapshots/ ::
localhost:/.private/.snapshots/ /.snapshots/ nfs ro 0 0You should now restart your NFS daemon.
Now mount the read-only snapshot root::
mount /.snapshots/To test this, go into the /.snapshots/ directory as root. It is set to read-only, so even root shouldn't be able to write to it. As root, try::
touch /.snapshots/testfileThis should fail, citing insufficient permissions. This is what you want. It means that your users won't be able to mess with the snapshots either.
Now, all your users have to do to recover old files is go into the /.snapshots directory, select the interval they want, and browse through the filesystem until they find the files they are looking for. They can't modify anything in here because NFS will prevent them, but they can copy anything that they had read permission for in the first place. All the regular filesystem permissions are still at work, but the read-only NFS mount prevents any writes from happening.
Please note that some NFS configurations may prevent you from accessing files that are owned by root and set to only be readable by root. In this situation, you may wish to pull backups for root from the "real" snapshot root, and let non-privileged users pull from the read-only NFS mount.
If you followed the instructions in this document, you should now have rsnapshot installed and set up to perform automatic backups of your system. If it's not working, go back and trace your steps back to see if you can isolate the problem.
The amount of disk space taken up will be equal to one full backup, plus an additional copy of every file that is changed. There is also a slight disk space overhead with creating multiple hard links, but it's not very much. On my system, adding a second, completely identical 3 Gigabyte interval alongside the original one only added about 15 Megabytes.
You can use the du option to rsnapshot to generate disk usage reports. To see the sum total of all space used, try::
rsnapshot duIf you were storing backups under localhost/home/ and wanted to see how much this subdirectory takes up throughout all your backups, try this instead::
rsnapshot du localhost/home/The latest version of this document and the rsnapshot program can always be found at http://www.rsnapshot.org/
No liability for the contents of this document can be accepted. Use the concepts, examples and information at your own risk. There may be errors and inaccuracies, that could be damaging to your system. Proceed with caution, and although this is highly unlikely, the author(s) do not take any responsibility.
All copyrights are held by their by their respective owners, unless specifically noted otherwise. Use of a term in this document should not be regarded as affecting the validity of any trademark or service mark. Naming of particular products or brands should not be seen as endorsements.
Please see the AUTHORS file for the complete list of contributors.
rsnapshot is OpenSource and licensed under the Terms of GNU General Public Licence v2. You're welcome to contribute!
This document, rsnapshot HOWTO, is copyrighted © 2005 by Nathan Rosenquist. You can redistribute it and/or modify it under the terms of the GNU General Public License as published by the Free Software Foundation; either version 2 of the License, or (at your option) any later version. A copy of the license is available at http://www.gnu.org/ copyleft/gpl.html.