Spike&Hold board
Ihor Sobianin edited this page Jul 20, 2023
·
1 revision
A spike&hold was originally developed for an odour stimulator project. The board consists of a 12V to 24V booster, which is also available as a discrete board. The electronic components can be changed to fit the exact application. In our case, we tried to minimise the range of components we use and thus the board reuses a lot of common resistor and capacitor values. More info on this is in the schematics.
Do not connect or disconnect connectors while power is ON. All adjustments must be done ONLY when power is OFF.